When XP starts, make a mistake 'instruction to target Ox7c919af2 memory @ Ox00000010. The memory could not write. »

Similar Questions

• The instruction at "0x6280436a" referenced memory at "0x0a055284" memory could not write click on OK to terminate the program.

  The instruction at "0x6280436a" referenced memory at "0x0a055284" memory could not write click on ok to terminate the program.

  Some programs that you have running is a failure. You have to find what it is that you can take appropriate measures such as uninstall/reinstall the program if it is legitimate. The first thing to do is to always make sure that the computer is free of viruses/malware:

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If the computer is clean, you can use a combination of Process Manager, the Configuration system, AutoRuns and boot in diagnostic mode utility to find out what is running and otherwise.

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  Important - do not use the System Configuration utility to stop the process. Use rather Start > Run > services.msc [Enter] and stop all services unless you really, really know what you're doing.

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx

  You can get Process Manager from the same link from Sysinternals above.

  Clean boot in Windows XP - http://support.microsoft.com/kb/310353
  Boot minimum troubleshooting Windows XP - Advanced http://support.microsoft.com/kb/316434

  MS - MVP - Elephant Boy computers - don't panic!

• Windows speech recognition stops randomly with the error: «the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80.» The memory could not write. »

  Original title: "the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80. The memory could not write. "And the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80. The memory could not be written.

  I have Windows Vista and I use speech recognition Windows, a lot of things. I have used it for years and have really learned to rely on it! Unfortunately, since a recent upgrade of windows installed, Windows speech recognition stops randomly in the middle of using it and it gives me the following error message: «the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80.» The memory could not write. "And then it stops. When I open it again, it seems to open normally and it will work for varying amounts of time before it does again and I get a different error message.

  I tried to restart and it did not help at all. Please, can someone help me? Please?

  Hi Alicia,.

  1 update you tried to install?

  Method 1:

  You can try to run a SFC scan and check.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Step 1:

  Check the updates that are installed recently.

  You can view the following link to check the installed updates:

  See the Windows updates are installed

  Step 2:

  You can uninstall these updates and try to install the update one at a time and check for the issue.

  Remove an update

  Method 3:

  You can also try a system restore to a restore point before the updates were installed.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• Cannot start service on local computer print spooler. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Ould does not start on local print spooler service. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Hello

  I suggest you try to launch the fixit of this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  It will be useful.

• When I start my pc there is a notice:-"the instructions of the '0x00402c60' referenced memory could not be read.

  How can I stop the view on my screen when I start my pc that says that the memory could not be read?

  Hello

  1 did you changes to the computer before the show?

  2 are you able to start the computer on the desk?

  3. What is the brand and model of the computer?

  Method 1: Run the fixit diagnosing memory problems

  http://go.Microsoft.com/?linkid=9759543

  Method 2: To resolve this problem, increase the size of the swap file:

  Click Start, right-click my computer, and then clickProperties.

  In the System Properties dialog box, click the Advanced tab.

  In the results pane, click settings.

  In the Performance Options dialog box, click the Advanced tab.

  In the virtual memory section, click change.

  Change the initial size value and the value of the maximum size to a value above, click onthe valueand then click OK.

  Click OK to close the Performance Options dialog box, and then clickOK to close the System Properties dialog box.

  See also:

  Maintenance tasks that improve performance

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performance

  Please let us know the result.

• When I start my PC, and before you start I receive this message from InfoCenter.exe - Application error - the application is not initialate properly (0xc0000135).

  Original title: initialize 0xc0000135

  When I start my PC, and before you start I receive this message from InfoCenter.exe - Application error - the application is not initialate properly (0xc0000135). I just click OK and continue. Any problem? Is this necessary application?

  Walter Rodriguez

  E-mail address is removed from the privacy *.

  10/07/12

  14:57

  Hello

  1. do you receive this after you see Start button or entry?

  2 have you made any changes to the computer before the show?

   

  Method 1: Boot errors are fixed by the clean boot.

  Perform the clean boot and see if that helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  Reference: How to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

   

  Method 2: Some malware parody itself as InfoCenter.exe, especially when it is located in the folder c:\windows or c:\windows\system32.

  I suggest you make a system full scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  , Note 1: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note 2: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• When I close Wordpad I get this error: "the instruction at 0x7c910b2c referenced memory at 0x01c801c0. The memory could not be "written". »

  Every time I close wordpad in XP I get the same error message 'the instruction at 0x7c910b2c referenced memory at 0x01c801c0. The memory could not be "written". "

  When I click OK to close this dialog box comes another upwards, back to "the instruction at 0x7c910a19 referenced memory at 0x01c801c0. The memory could not be "read". "

  I don't have any idea what is wrong. I tried to remove and reinstall wordpad but that did not help.

  original title: Error closing wordpad

  Hello

  Disable DEP (Data Execution Prevention) for Wordpad and see if it helps.

  a: Click on Start > run

  b: Type Control Panel in the Run dialog box and click on enter.

  c: then click on System , then Advanced System settings.

  d: then click on the settings button under Performance.

  e: Then click on Data Execution Prevention tab.

  f: Now select the option " turn on DEP for all programs and services except those I select. "

  g: now click Add , and then select Wordpad.exe

  h: click apply , then ok.

  Hope this information helps.

• I use XP and when I try to open Outlook Express I get this message. "Outlook Express could not be started because MSOE." DLL could not be initialized. Outlook Express is not installed properly

  Last night, everything seemed normal. When I try to open Outlook Express, I get this message. "Outlook express could not be started.  The application could not open message store outlook express.  Your computer may be out of memory or your disk is full.  Contact Microsoft Support for assistance. (0x800700C1, 193) "after this message, the message above was posted. I bought and ran a program called FixCleaner with the same results. I also cleaned my disk and more 66 G remains to use and have a lot of available memory.

  Thank you all for your help, but I gave up and took it to my computer guru and fixed it. He said there where a few old accounts in the computer and registry was messed up and it solved the problem and now it works.

  THANKS again!

• Error: "the instruction at 0x010acd0c referenced memory is not able to be read. "SQLDUMPER library not initiation" to start Windows XP.

  Original title: SQLDUMPER library initiation.

  From the start of my computer, I get the following error message:

  "The instruction at 0x010acd0c referenced memory is not able to be read. "SQLDUMPER library not initiation.

  What can be done to perfect this problem?

  Dump SQL program is a program that helps you to debug the SQL database on your system crashes.

  If you don't have SQL Server installed on your system or don't know what it means, that the software SQL debugging could subsist a trial version of the software you installed and uninstalled then more late leaving the program SQL dump and now he doesn't know what to do with himself.

  Take a look in Add/Remove programs to something like this:

  Microsoft SQL Server VSS Writer

  If find you it and know that you are not using SQL Server, uninstall Microsoft SQL Server VSS Writer, restart and see what things look like.

• "The instruction at 0x6c371c9d referenced memory at 0 x 00000038. The memory could not be read. "when I go to create a new pdf of the file after the installation of updates

  Original title: "the instruction at 0x6c371c9d referenced memory at 0 x 00000038. The memory could not be read. »

  I worked on a design project for a few days I made several pdf files from. During the night, Windows ran and installed the updates on my computer. (My design file was open at the time). Now, when I go to create a new pdf of the file, I get the following error code: "the instruction at 0x6c371c9d referenced memory at 0 x 00000038. The memory could not be read. »

  HELP - I can't find a solution.

  Thank you!!

  Hello

  1. what program you use for your design project?

  2. did you run the repair of this program?

  Perform System Restore on the computer and check if that helps.

• When I start my computer I get a message that says that the file < root windows > \system32\hal.dll. is damaged or missing.

  file HAL.dll

  When I start my computer I get a message that says that the file \system32\hal.dll. is damaged or missing. Please reinstall a copy of the file. I have the original Windows XP CD and I tried to re - install, but it will not go beyond the implementation of window. I can't sign in to windows. How can I reintall this file?

  It's extremely likely that you will need to replace the hal.dll and since there are seven files on the XP installation CD that will extend into hal.dll, which would you choose?  It depends on your hardware, but it is extremely likely that the problem (did I already say that?).  I've never had to replace a file hal.dll for this problem.

  The real problem is most likely that XP just can not find the file because of a file system corruption or a file c:\boot.ini afflicted.

  For this error, I would always be first boot from the XP Recovery Console and sometimes run a chkdsk-r that will fix things right to the top.

  If the chkdsk /r is clean and you have the same problem, and then re-create your c:\boot.ini file but rename the old one first so you don't build on top of those afflicted - this tidbit is absent from MS KB article that assumes too.

  You can do all this in the XP Recovery Console, but do go through these methods in this article and see how you go.

  For example, method 1 will not work if your system does not start.  You may have more luck with other "methods".

  If that doesn't work, then I suggest to provide a little more information about your system:

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a real installation CD bootable XP which is the same Service Pack as your installed Service Pack? (this is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

• Error - the instruction at "0x7c923845" referenced memory at "0x00000000". the memory could not be "read". Computer Windows XP freezes when online.

  Original title: svchost.exe - Application error.

  When I'm online I get the error message appear as follows:

  Svchost.exe - Application error

  The instruction at "0x7c923845" referenced memory at "0x00000000". the memory could not be "read".

  Then my computer freezes

  Don't know what triggered it on my machine, I do not use 'messenger' , but I discovered that it was something to do with Windows. I have a Toshiba laptop, I finally ran the process of "adding value to products" using their 'product recovery disk '.  It took hours to reload everything and download the updates after the hard drive has been re-configured, but it seems to have solved the problems that I had with.  Radical solution, I know, but I'm not a "geek" so was becoming more frustrated with the constant "freezes" and poor performance.  I can only assume that my Windows XP system had somehow been corrupted.  It's all working fine now, fingers crossed!

• When I select Help and support icon, I get an error message indicating that the feature could not start.

  help and support does not work

  When I select Help and support icon, I get an error message indicating that the feature could not start.

  I use a Vista 32 bits on a HP computer operating system model number m8300f.

  In addition, I bought a copy of Win 7, but who could not load freezing during installation.

  Hello

  Try to run the command in the elevated command prompt, follow the steps below, it could help us solve the problem.

  1. open the start menu, click programs principally made, select accessories.
  2. right click on command prompt, and then click "run as administrator ".
  3. type the following commands in the DOS prompt window and press ENTER at the end
  of each line:

  REGSVR32 MSXML3. DLL/U
  REGSVR32 MSXML3. DLL
  REGSVR32 MSXML6. DLL/U
  REGSVR32 MSXML6. DLL

  (At the elevated command prompt command should not give us any error).

  Restart the computer and try to access help and Support.

  For the problem of installation of windows 7.

  We would like to get more information about you to help solve your problem. You better, please answer the following questions.

  1. How did you start the installation process?

  2. you perform a new installation or an upgrade?

  3. what type of drive you are using for installation?

  4. at what stage of the installation has it stopped?

  5. have you received an error message?

  First of all, I would say that you disconnect external devices connected to the computer except the keyboard and mouse.

  If you have performed an upgrade suggests to restart the computer and you will be prompted for a roll back option.

  Once you're on the office suggests to run Upgrade Advisor and check what needs to be done before you start the upgrade.

  Before you begin the upgrade process to ensure that your computer meets the condition of equipment to install Windows 7 and check on the website of manufacturer computer if the computer is good to run windows 7 or not.

  Installing and reinstalling Windows

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows

• When I try to print from photoshop cc I get the message "the instruction at 0xb660643f referenced memory at 0 x 00000006. the memory could not be read. I'm running on Windows using Intel (R) Graphics 4600 8.1

  When I try to print from photoshop cc I get the message "the instruction at 0xb660643f referenced memory at 0 x 00000006. the memory could not be read. I run on Windows using Intel (R) Graphics 4600 8.1. Can someone help me with this?

  Hi Tanuj,

  Thanks for your reply. The problem seems to be a damaged printer driver. I tried to print from my laptop computer rather than my PC and that worked OK. I downloaded the latest driver for the Epson 3880 but then find that the print spooler has become invalid. When I restarted the print spooler, everything worked again and I'm able to print as usual.

  Concerning

  Gordon

  Gordon Gentles

  [email protected]

• Windows 10 first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.  I reinstalled, reformatted the drive one reinstalled Windows 10 from scratch and I still get this error.  Has anyone seen this one?  My setup is below:

  

  Hi PK Gary,.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin