Could SPA302D enroll in SPA232D after firmware updated to version 1.3.3

Similar Questions

• When I run firefox it takes about 30 seconds and it prevents the functioning of my mcafee? It started after I updated to version 10!

  When I run firefox it takes about 30 seconds and it prevents the functioning of my mcafee? its has started after I updated to version 10!

  Hello

  You can try to update the add-on of McAfee. The latest version is reported to be less problematic. See also this.

• SOLVED: Slow wireless internet passthrough after firmware update

  If I first bought a Nighthawk in July 2014 and it was great for a while. Then in the notice happened a few months my streaming services are jumping and more than usual buffering (which was almost never with the Nighthawk).

  I have a connection of 110Mbps (Comcast and through a SB6141 modem), but all of a sudden was only getting 10 Mbps (or less) passthrough on 5 G wireless band (at the beginning of the speed test would sometimes up to 50 Mbit/s, but on a few seconds would fall to nothing..)

  Cable speeds were very good. Always 110Mbps +. Tried several different channels and factory reset the router, wireless speed was still slow. Connected to the Netgear website and submitted a support ticket within 2 hours they sent me with an RMA number and the next day a new unit has been FedEx would be for me. Support rep Tech says it's a problem of material known in some units... I was super impressed with the customer service, it was seriously a no replacement of hassles that took every 15 minutes of my time.

  EXCEPT when I got the replacement router in the next few days, he had the SAME PROBLEM. As soon as the new router is on and I'm connected, I've upgraded to the latest version of the firmware, done a factory reset and down Speedtest. And I had the same problem: speed internet passthrough on all my wireless devices has been terrible. Less than 10 Mbps when I have a connection 110 + Mbps. (Wired speeds were great, it was not a problem of modem or provider).

  Again contacted support and they asked me to download the latest firmware on laptop and upgrade the router manually, do a factory reset before and after the upgrade. They also told me to try to disable WMM (made no difference speed passthrough, but lower my laptop connection between 433Mbps to 54Mbps speed!).

  I tried this... still slow passthough wireless speed.

  The only thing that has changed since I first got a Nighthawk in July 2014 (and I've run speedtests then and had a speed 110 wireless + Mbit/s at the time), is that the firmware has updated several times... makes me think...

  I downloaded the Netgear support the past 5 versions of the firmware for the Nighthawk. http://downloadcenter.netgear.com/en/product/R7000#sear...

  I then manually downgraded the Nighthawk to each previous version (do a factory reset before and after each installation) and ran Speedtest every time. Once I have got down to the R7000 Version - V1.0.3.24_1.1.20 (released 12/02/14) and ran a Speedtest, the PROBLEM has BEEN RESOLVED. Speed wireless devices (laptop, HTC a M7 and iPad Air 2) were all back up to 110Mbps or more!

  Hope this experience helps someone else... If your are affected by the passthrough slow internet speeds and it is not your connection speed (i.e. radio parasites) that is the question, there seems to be a serious problem with the latest latest versions of couple... Try downgrading to the R7000 firmware version - V1.0.3.24_1.1.20

  UPDATE: Yes, I actually tested the speed with several different devices (a laptop HP HTC a M7 and Nexus 9) each on 5G band, all compatible with the latest updates ac. I also used a few test sites of different speed (speedtest.net, comcast speedtest, cnet speed test), not had the same result all devices and hosts.

  However, I actually got in touch with Netgear L2 support for the last month... beta test a few different versions of the firmware of the Nighthawk and even spend more than an hour on the phone one night with a nice guy who told me he was on an island in Southeast Asia, part of the Philippines... This is where Netgear technical support is to halfway between China where they build them and Taiwan where engineers are. After trying all tweak he could think for an hour and not get better speeds wireless, he finally dropped out and wished me a Merry Christmas lol. Not one of these beta firmware made a bit of difference, and I hate the hours that they made me screwing around with them!

  BUT today, they released vR7000 - V1.0.4.14_1.1.50 http://support.netgear.com/product/r7000

  And to my surprise it actually worked! Not only my high speed wireless is returned (120 + Mbps)

  http://www.Speedtest.NET/my-result/4078979293 (laptop)
  http://www.Speedtest.NET/my-result/a/1131321713 (nexus 9)
  http://www.Speedtest.NET/my-result/a/1131332778 (htc a m7)

  but also my Seagate SRD0SD0 previously incompatible (3 TB) USB 3.0 external hard drive works now, too. What a bonus! The reason I bought the Nighthawk was to use as Server DLNA and the monster external HD I picked up 6 months ago only was on the long list of those incompatible with this capricious router.

  But now everything works (at least for now).

  P.S. Maybe it's in my head, but I swear to you that since the last firmware update when running speedtest now or file transfer (while heavy streaming) I can hear the router doing a greater slope electric buzzing/hissing noise is a little disconcerting... I'm not sure my brain fried by overclocked wifi will be worth a high speed in the end...: eek:

• WRT54G v4 unusable web interface after firmware update

  I tried to upgrade (actually downgrade) my WRT54G v4 firmware 4.30.11 to 4.21.1. When the progress bar reaches the mark to halfway, I got the message saying that the upgrade was successful. However, now the web interface is so messed up that it is unusable. It's a sign that something went wrong.

  Power, WLAN, Ethernet 1, and Internet lights are all green solid, which should be a good sign. After the upgrade, the web interface says "WRT54G 4.21.1', which is the firmware messed up I am downloading. Browsers, then restart my computer, I have confirmed that it is a router problem, not a problem of the browser cache. I also tried to do a hard reset by pressing the reset for 30 seconds button, unplug the router while holding down the button of reset for 30 seconds and then plug the router while holding down the button of reset for another 30 seconds. This has not fixed anything.

  I encountered a similar problem after an update of the firmware several years ago and the fix to upgrade the firmware using TFTP. This time, however, the TFTP utility could not download the firmware. Using a hack that I found on the internet, I have re - download the 4.21.1 firmware, but the web interface was always messed up. I then downloaded the 4.30.13 firmware. The web interface is still messed up, but then he said "WRT54GL 4.30.13. I then went to the firmware I wanted, WRT54G 4.21.1. The web interface is still screwed up, but said «WRT54G 4.21.1»

  Anyone know how to solve the problem? Yet once, it took place immediately after a firmware update, the web interface is unusable, is not a problem of the browser cache and tried a hard reset.

  Thanks in advance if anyone can help.

  My router model is WRT54G v4. The v4 WRT54G and the WRT54GL are generally considered to be the same device with different model numbers. According to the article of Wikipedia WRT54G, "the WRT54GL is technically a reissue of the version 4 WRT54G."

  I used the firmware 4.30.X for years without problems. However, I decided to switch to the 'right' firmware for my router and something went wrong during the upgrade.

  I solved the problem. I basically just dropped the Linksys firmware and uploaded the DD open source-WRT firmware mini instead. Now everything works fine.

• Unable to connect to LTE after firmware update

  My D5833 could connect to LTE after upgrade to Android 5.0.2. However, it can not longer after the new firmware updated to 23.1.A.1.28. I tried to turn off the phone, remove the SIM card and insert the return; tried flashing using flashtool, none makes it capable to connect to LTE.
  All the tips to solve the problem

  Try to manually add the APN settings and also get a new micro SIM card.

• OfficeJet Pro 8620e ADF jam error after firmware update

  After you install the updated firmware from the touch screen of the printer, the printer restarts and now has an error that says "Original is caught in the ADF (ADF).  Open the cover of the ADF, remove and reload the original, then try again. »

  I went through all the steps to clear a jam from the ADF, but the opinion is persistent.  It is not (and was not before the upgrade) in the ADF at all.  Since this coincided with the update of the firmware, my suspiscion is that the firmware has not installed properly or something.  What am I doing here?

  This problem has been resolved using the printer instead of purchase and exchange for another.  I can hardly believe that the cables are working loose within two weeks, she was detained and then broke at the exact time that the firmware update has been completed.  In any case, the problem was solved by replacing the printer.  I don't have any feedback solutions until a month after I did.

• ScanJet 7400c - does not work after firmware update.

  From scratch.

  Windows XP sp3

  HP PrecisionScan Pro 3.02 software installed.

  then add the update of the firmware.8s which is supposed to fix some problems. One being a squeak in certain situations. A problem I had met.

  Otherwise the scanner worked fine.

  now it doesn't work at all. Scanner displays 'error 07' at any time, it is asked to do something. Also get the message scanner could not be initialized Scanner not found)

  What really bothers me is that it worked before the updates.

  Now, nothing.

  I tried to reload the updates, then tap, disconnect, restart the process.

  Is the Junk to scan?

  Read before:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=sj678en & LC = on & DLC = in & CC = US & Product = 59553 & os = 228 & lang = in

  Title:

  ScanJet 7400 c / 7450c / 7490c USB and SCSI - Firmware update.

  FYI, connected by usb

  Apparently the update does not what he claims too.

• Qosmio G20-127: after firmware update cannot burn CD or DVD

  I'm updating my firmware from F101 F102 to dvd so I can't copy any CD or DVD in my drive also some CD & DVD cannot be played after this update, I tried to
  install the old firmware F101, but I can't so please help me?

  Thanx

  Hello

  How do update you?
  Before update you the firmware, follow this:
  -Always use AC adapter to avoid a power off by updating the F / w.
  -Do not turn on DVD + r / + RW/RAM DRIVE by updating the F / w.
  -Put an end to all applications except the F/W update of the program.
  -Are not completed with force the F/W update program
  -Be sure to manually restart Windows after completing the update.
  -Update program automatically eliminates the ineligible disks

• Toshiba 47M7463DG no clouds do not service after firmware update

  Hi all
  I have a problem with my Toshiba 47L7463DG. Services (accessible from the Home button) Cloud stopped working after the recent firmware upgraded. Is there something I can do to return to the previous version of firmware or solve this problem?

  Details:
  Toshiba 2014-051
  May 21, 2015
  Version of the 8.1.97.09.01.1 software
  MBoot Version 00813201
  Shipout G

  Thanks in advance.
  hysten

  After each update of the firmware, reset the TV.
  If you don't, I recommend you perform this procedure...

• 40L3455DB - not able to access services online after firmware update

  After an update of firmware for my 40L3455DB, I was not able to access online services

  I have contacted the online support, but have no joy, and they say they're looking for him

  what lasts for 2 months

  has anyone else had this kind of problem

  I had also the message on my Toshi firmware update is available, but somehow, I can't install because for now everything works OK and I'm happy with it.
  I would like to know if you can temporary fix it if go back you to the factory settings.

  What do you think about this?

• Sansa Fuze - insufficient volume after firmware update

  After the latest firmware update to its maximum volume looks like a whisper. And the configuration of the System Volume option disappeared! Thought that this setting is set to Normal and should change at the top. But the Volume option no longer exists. I use the same set of headphones. Any ideas? Can I go back to the previous firmware? or should I get another MP3 player? Whenever I update the firmware, I have all sorts of problems! All the presets radio disappear as well! But the problem of volume is the most boring... Thank you all in advance.

  Why throw the baby out with the bath water?  Let build .31 on the device and set your locale.  Choose reset to factory settings, choose in North America and your preferred language.  For Europe, you will need to do is choose "rest" for your steps of FM frequencies.

  Note: You can leave the current version of the firmware installed on the device (build current est.31 ou.33 according to the revision of your device).  Once you select 'Yes' for the mask to reset factory settings, the unit will ask you your desired area.  For the EMEA region, do not forget to go to settings > Options Radio > region and select Europe for the stages of EU frequeqncy.

  I just wanted you to save a lot of hassle!  Your volume option will be available again.

  With regard to the volume, please use good judgment when you listen to your music.  Keep the volume at a reasonable level, because your audience in the long term is much more valuable than a little loud music.  If the device is for the kids, well, as a dad, I know how they are.  Perhaps the limited volume can be useful for once.  You can blame on the EU regulations.

  Bob

• WRT 160N V3 - signal drops after Firmware update

  Hi I recently upgraded the firmware on my wrt 160N v3 and changed security WPA2 Personal wireless from WEP (I needed to do this to get the speeds of a purchased wireless adapter recently).  Now the router stops transmitting a signal intermittently for about a minute before returning to the line.  The time between drops is also not the same.  Before updating firmware (and change security settings), the router has been solid as a rock.  Any suggestions on how to fix or maybe where I can get the old firmware version (which seems to be more stable than the current version)? THX

  You mentioned in your post that you updated the firmware. So, after firmware upgrade reset you the router? After the successful update, you need to reset the router. It is recommended to reset the router once. Steps to reset the router:

  Press the reset button on the router for 30 seconds, turn off the router, wait 30 seconds and then turn it on. Power light should blink when you perform the reset process.

  After reset, reconfigure the router, and then check the status of the connectivity.

  If the issue still persist then yry the following parameters:

  # Open the browser and in the address bar type 192.168.1.1 which will open the router configuration page.

  # Bring back the MTU (Maximum Transmission Unit) of 1500 to 1400 or less (usually found on the main page / basic configuration of your router). Here is the link to determine and implement the right size MTU: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=fbf8e8564632422eaa8ea80bf9dcba64_386.xml&pid=80&re...

  # Click on wireless tab select the channel wireless at 6, 9 and 11. Click on save settings.

  Settings wireless #Adjust the following:

  ~ ~ Reduced from 100 to 75 beacon interval

  ~ ~ Lower the threshold of fragmentation of 2346 to 2306

  ~ ~ Lower 2347 to 2307 RTS threshold

  Then reconnect to the wireless network and then check the connectivity status...

• Speed drop after Firmware update WRT54G2 wireless

  I have a WRT54G2 V1, which began to do a lot of loss of wireless signal, the wired computers are always connected to the net, completely wired computers lose the connection. I decided to try an update of firmware for 1.0.04)is Build 5. and the flow has fallen by 2 members! The wired computers have the same speed of connection as before. I feel is one of the parameters of connection in advance, don't know how tweek. I already went through all the different voltages without success.

  Help!

  So all settings are the same after the update of the Firmware but I went a head and did a reset and all, still half speed re-admitted. It fixed by a new round of power. Also since updated the firmware and reset have not had problems with the router stopping broadcasting either.

• Misprints LaserJet 500 M551 after firmware update

  I recently updated the firmware on the M551 dn 500 laserjet printer.  I installed the update of the firmware successfully, but I keep is printed with characters on the pages 'trash '.  He randomally prints this way and is not consistent.  I don't have that happen after the upgrade.

  I updated the firmware twice in an attempt to erase mistakes without result.

  I did the format clean and complete part and I still get the same errors that occur.

  I tried the upgrade to the current pcl6 driver as well.

  I use windows xp and older windows programs.  This happens in the office software and software autodesk as well.

  I am ready to return to the previous update of the firmware if possible.  I had problems with this firmware update so (printer refuses to print after a period of time), but I'm ready to come back just so that I can keep the waste of paper.

  I've attached an example of printed copies.

  Hi vbrown,

  I don't know what worm pcl6. you use, but try to drive perhaps PS

• "droplets could not communicate with photoshop" after the update of Windows 10 anniversary

  Received the error "droplets could not communicate with photoshop" after that I upgraded Windows version 1607. I tried different droplets, their new creation as an administrator, open Photoshop and/or gout as administrator, disable UAC and Windowsdefender (with restart), reinstall Photoshop and creative cloud together, userpreferences and all the plugins.

  PSerrorlog showed the following: of type struct _ADsc * __ptr64 are not found: 1: DEMAND is not

  Only found a solution to reset the settings, who removed the error in the log, but it seems that he had nothing to do with my problem of droplets.

  He has no idea of what I could do, left, with the exception of the decommissioning of windows, I would not call a solution. Please help me.

  Systeminformations:

  Adobe Photoshop Version: 2015.5.1 20160722.r.156 2016/07 / 22:23:00:00 CL 1083377 x 64

  Operating system: Windows 64-bit 10

  Version: 10 or higher

  System architecture: Intel CPU Family: 6, Stepping: 8 with MMX, entire SSE, SSE, SSE2, SSE3, SSE4.1, SSE4.2, model FP: 7

  Physical processor count: 4

  Processor speed: 2167 MHz

  Built-in memory: 3979 MB

  Free memory: 1382 MB

  Memory available to Photoshop: 3161 MB

  Memory used by Photoshop: 70%

  Layers of alias: ^ 0

  Range of modifier: enabled.

  Space design: enabled.

  Multi-frequency 3D printing: disabled.

  HighBeam: enabled.

  Tile image size: 1024K

  Image cache level: 4

  Overview of fonts: medium

  TextComposer: Latin

  Display: 1

  Limits of the display: top = 0, left = 0, low = 768, right = 1366

  OpenGL drawing: enabled.

  OpenGL allows old GPU: not detected.

  OpenGL drawing mode: Advanced

  OpenGL allows Normal Mode: true.

  OpenGL allows Advanced Mode: true.

  AIFCoreInitialized = 1

  AIFOGLInitialized = 1

  OGLContextCreated = 1

  NumGLGPUs = 1

  NumCLGPUs = 1

  glgpu [0]. GLVersion = "4.0".

  glgpu [0]. IsIntegratedGLGPU = 1

  glgpu [0]. GLMemoryMB = 2053

  glgpu [0]. GLName = "Intel(r) HD Graphics"

  glgpu [0]. GLVendor = "Intel."

  glgpu [0]. GLVendorID = 32902

  glgpu [0]. GLDriverVersion = "10.18.10.4276".

  glgpu [0]. GLRectTextureSize = 16384

  glgpu [0]. GLRenderer = "Intel(r) HD Graphics"

  glgpu [0]. GLRendererID = 3889

  glgpu [0]. HasGLNPOTSupport = 1

  glgpu [0]. GLDriver = "igdumdim64.dll, igd10iumd64.dll, igd10iumd64.dll, igdumdim32, igd10iumd32, i gd10iumd32.

  glgpu [0]. GLDriverDate = "20150817000000.000000 - 000.

  glgpu [0]. CanCompileProgramGLSL = 1

  glgpu [0]. GLFrameBufferOK = 1

  glgpu [0] .glGetString [GL_SHADING_LANGUAGE_VERSION] = ' 1.30 - Build 10.18.10.4276.

  glgpu [0] .glGetProgramivARB [GL_FRAGMENT_PROGRAM_ARB] [GL_MAX_PROGRAM_INSTRUCTIONS_ARB] = [1447]

  glgpu [0] .glGetIntegerv [GL_MAX_TEXTURE_UNITS] = [8]

  glgpu [0] .glGetIntegerv [GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS] = [96]

  glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS] = [16]

  glgpu [0] .glGetIntegerv [GL_MAX_TEXTURE_IMAGE_UNITS] = [16]

  glgpu [0] .glGetIntegerv [GL_MAX_DRAW_BUFFERS] = [8]

  glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_UNIFORM_COMPONENTS] = [4096]

  glgpu [0] .glGetIntegerv [GL_MAX_FRAGMENT_UNIFORM_COMPONENTS] = [4096]

  glgpu [0] .glGetIntegerv [GL_MAX_VARYING_FLOATS] = [64]

  glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_ATTRIBS] = [16]

  glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_PROGRAM] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_FRAGMENT_PROGRAM] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_SHADER] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_FRAGMENT_SHADER] = 1

  glgpu [0] .extension [AIF::OGL:GL_EXT_FRAMEBUFFER_OBJECT] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_TEXTURE_RECTANGLE] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_TEXTURE_FLOAT] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_OCCLUSION_QUERY] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_BUFFER_OBJECT] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_SHADER_TEXTURE_LOD] = 0

  clgpu [0]. CLPlatformVersion = "1.2".

  clgpu [0]. CLDeviceVersion = "1.2".

  clgpu [0]. IsIntegratedCLGPU = 1

  clgpu [0]. CLMemoryMB = 1374

  clgpu [0]. CLName = "Intel(r) HD Graphics"

  clgpu [0]. CLVendor = "Intel(r) Corporation"

  clgpu [0]. CLVendorID = 32902

  clgpu [0]. CLDriverVersion = "10.18.10.4276".

  clgpu [0]. CUDASupported = 0

  clgpu [0]. CLBandwidth = 5.88518e + 09

  clgpu [0]. CLCompute = 20.0346

  Type of license: subscription

  Serial number: 90970308319443247148

  GUIDBucket:

  bucket: 162

  test: ReduceUXFriction

  The application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2015.5\

  Temporary file path: C:\Users\REN~1\AppData\Local\Temp\

  Zero Photoshop has async I/O active

  Scratch the volumes:

  Startup, 425, 2 G, 334, 6 free G

  Required plugins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2015.5\Required\Plug-Ins\

  Main Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2015.5\Plug-ins\

  Installed components:

  A3DLIBS.dll A3DLIB 9.2.0.112 dynamic link library

  ACE.dll ACE 2016/05/07-01: 09: 29 79,573668 79.573668

  PatchMatch 2016/05/17:03:10:18 1.573920 AdbePM.dll 1.573920

  AdobeLinguistic.dll Adobe linguistic Library 10.0.0

  AdobeOwl.dll Adobe Owl 5.2.11

  AdobePDFL.dll PDFL 2016/04/13-01: 12: 44 79,182661 79.182661

  Adobe AdobePIP.dll 7.3.1.128.44549 product improvement program

  AdobeSVGAGM.dll AdobeSVGAGM 79.571757 79.571757

  AdobeXMP.dll Adobe XMP Core 2016/04/19-13: 13:40 79,159284 79.159284

  AdobeXMPFiles.dll Adobe XMP files 2016/04/19-13: 13:40 79,159284 79.159284

  AdobeXMPScript.dll Adobe XMP Script 2016/04/19-13: 13: 40 79,159284 79.159284

  adobe_caps.dll Adobe CAPS 10,0,0,5

  AGM.dll AGM 2016/05/07-01: 09: 29 79,573668 79.573668

  ahclient.dll AdobeHelp Dynamic Link Library 2.0.0.2

  AIDE.dll HELP-2016/02/29-16:28:21 79,571906 79.571906

  Amtlib.dll AMTLib (64 Bit) 10.0.0.3BuildVersion: 10.0; Brand: Thursday, April 21, 2016 3:6:38) 1.000000

  ARE.dll ARE 2016/05/07-01: 09:29 79,573668 79.573668

  Axe8sharedexpat.dll AXE8SharedExpat 2015/03/13-23: 40:54 79,562390 79.562390

  AXEDOMCore.dll AXEDOMCore 2015/03/13-23: 40:54 79,562390 79.562390

  Bib.dll BIB 2016/05/07-01: 09: 29 79,573668 79.573668

  BIBUtils.dll BIBUtils 2016/05/07-01: 09: 29 79,573668 79.573668

  boost_date_time.dll photoshopdva 10.0.0

  boost_signals.dll photoshopdva 10.0.0

  boost_system.dll photoshopdva 10.0.0

  boost_threads.dll photoshopdva 10.0.0

  CG.dll NVIDIA Cg Runtime 3.0.00007

  cgGL.dll NVIDIA Cg Runtime 3.0.00007

  Adobe CIT.dll CIT 2.1.0.1 2.1.0.1

  CITThreading.dll Adobe CITThreading 2.1.0.1 2.1.0.1

  CoolType.dll CoolType 2016/05/07-01: 09: 29 79,573668 79.573668

  c:\windows\system32\dnssd.dll Hello 3,0,0,2

  dvaaudiodevice.dll photoshopdva 10.0.0

  dvacore.dll photoshopdva 10.0.0

  dvamarshal.dll photoshopdva 10.0.0

  dvamediatypes.dll photoshopdva 10.0.0

  dvametadata.dll photoshopdva 10.0.0

  dvametadataapi.dll photoshopdva 10.0.0

  dvametadataui.dll photoshopdva 10.0.0

  dvaplayer.dll photoshopdva 10.0.0

  dvatransport.dll photoshopdva 10.0.0

  dvaui.dll photoshopdva 10.0.0

  dvaunittesting.dll photoshopdva 10.0.0

  Dynamiclink.dll photoshopdva 10.0.0

  ExtendScript.dll ExtendScript 2016/01/26-16: 09: 33 80.1060872 80.1060872

  icucnv40.dll International Components for Unicode 2014 10/31-16: 52:45 Build gtlib_6.0.21339

  icudt40.dll International Components for Unicode 2014 10/31-16: 52:45 Build gtlib_6.0.21339

  icuuc40.dll International Components for Unicode 2014 10/31-16: 52:45 Build gtlib_6.0.21339

  igestep30.dll IGES 9.3.0.113 drive

  imslib.dll IMSLib DLL 10.0.0.1

  JP2KLib.dll JP2KLib 2016/02/19-14: 20: 46 79,261706 79.261706

  libifcoremd.dll Intel Visual Fortran compiler 10.0 (A patch)

  libiomp5md.dll Intel(r) OpenMP * Runtime Library 5.0

  libmmd.dll Intel(r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0

  LogSession.dll LogSession 7.3.1.128.44549

  mediacoreif.dll photoshopdva 10.0.0

  MPS.dll MPS 2016/02/24-01: 09: 44 79,571748 79.571748

  pdfsettings.dll Adobe PDFSettings 1.04

  Adobe Photoshop 2015.5 CC 17.0.1 Photoshop.dll

  Adobe Photoshop 2015.5 CC 17.0.1 plugin.dll

  PlugPlugExternalObject.dll CEP PlugPlugExternalObject Dll (64-bit) 7.0.0 Standard Adobe

  PlugPlugOwl.dll Adobe CSXS PlugPlugOwl Dll Standard (64 bit) 7.0.0.50

  PSArt.dll Adobe Photoshop 2015.5 CC 17.0.1

  PSViews.dll Adobe Photoshop 2015.5 CC 17.0.1

  SCCore.dll ScCore 2016/01/26-16: 09: 33 80.1060872 80.1060872

  SVGRE.dll SVGRE 79.571757 79.571757

  svml_dispmd.dll Intel (r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0

  TBB.dll Intel Threading Building Blocks for Windows 4, 4, 2016, 0120

  tbbmalloc.dll Intel Threading Building Blocks for Windows 4, 4, 2016, 0120

  TfFontMgr.dll FontMgr 9.3.0.113

  TfKernel.dll kernel 9.3.0.113

  Geom TFKGEOM.dll kernel 9.3.0.113

  Adobe TFUGEOM.dll, UGeom © 9.3.0.113

  updaternotifications.dll library Adobe Updater Notifications 10.0.0.1 (BuildVersion: 1.0;) Brand: BUILDDATETIME) 10.0.0.1

  VulcanControl.dll Vulcan Control Library 5.3.0.14 Application

  VulcanMessage5.dll Vulcan Message Library 5.3.0.13

  WRServices.dll WRServices Thursday 7 January 2016 04:50:10 build 0.21960 0,21960

  U3D writer 9.3.0.113 wu3d.dll

  Required plugins:

  3D Studio 17.0.1 (2015.5.1 x 001 003 x)-from the file 'U3D.8bi '.

  Accented edges 17.0.1 - from the file "Filter Gallery.8bf"

  Adaptive Wide Angle 17.0.1 - from the file ' Adaptive Wide Angle.8bf.

  Angular Strokes 17.0.1 - from the file 'filter Gallery.8bf'

  Average 17.0.1 (2015.5.1 x 001 003 x)-from the file 'Average.8bf '.

  Low Relief 17.0.1 - from the file 'filter Gallery.8bf'

  BMP 17.0.1 - from the file "MultiPlugin.8bf series"

  Camera Raw 9.6.1 - from the file 'Camera Raw.8bi'

  Camera Raw Filter 9.6.1 - from the file 'Camera Raw.8bi'

  Chalk & & charcoal 17.0.1 - from the file "filter Gallery.8bf.

  Charcoal 17.0.1 - from the file "Filter Gallery.8bf"

  Chrome 17.0.1 - from the file "Filter Gallery.8bf"

  17.0.1 Cineon (2015.5.1 x 001 003 x)-from the file 'Cineon.8bi '.

  17.0.1 clouds (2015.5.1 x 001 003 x)-from the file 'Clouds.8bf '.

  COLLADA 17.0.1 (2015.5.1 x 001 003 x)-from the file 'U3D.8bi '.

  Color halftone 17.0.1 - from the file "MultiPlugin.8bf series"

  17.0.1 - from the file pencil 'filter Gallery.8bf'

  CompuServe GIF 17.0.1 - from the file "MultiPlugin.8bf series"

  Conte pencil 17.0.1 - from the file "Filter Gallery.8bf"

  Craquelure 17.0.1 - from the file 'filter Gallery.8bf'

  Crop and straighten Photos 17.0.1 (2015.5.1 x 001 003 x)-from the file 'CropPhotosAuto.8li '.

  Crop and straighten Photos filter 17.0.1 - from the file "series MultiPlugin.8bf.

  Hatching 17.0.1 - from the file "Filter Gallery.8bf"

  Crystallize 17.0.1 - from the file "MultiPlugin.8bf series"

  Cutting 17.0.1 - from the file "Filter Gallery.8bf"

  Dark strokes 17.0.1 - from the file "Filter Gallery.8bf"

  Deinterlacing 17.0.1 - from the file "MultiPlugin.8bf series"

  DICOM 17.0.1 - from the file "Dicom.8bi.

  Difference clouds 17.0.1 (2015.5.1 x 001 003 x)-from the file 'Clouds.8bf '.

  Diffuse Glow 17.0.1 - from the file 'filter Gallery.8bf'

  Move 17.0.1 - from the file "MultiPlugin.8bf series"

  Dry brush 17.0.1 - from the file 'filter Gallery.8bf'

  Eazel Acquire 17.0.1 (2015.5.1 x 001 003 x)-from the file 'EazelAcquire.8ba '.

  17.0.1 entropy (2015.5.1 x 001 003 x)-from the file 'statistics.8ba '.

  Export Tables to color search NO VERSION - from the file 'Export3DLUT.8be '.

  Extrude 17.0.1 - from the file "MultiPlugin.8bf series"

  Routine 17.0.1 FastCore (2015.5.1 x 001 003 x)-from the file "FastCore.8bx.

  Fiber 17.0.1 - from the file "MultiPlugin.8bf series"

  Film Grain 17.0.1 - from the file 'filter Gallery.8bf'

  Filter Gallery 17.0.1 - from the file 'filter Gallery.8bf'

  Flash 3D 17.0.1 (2015.5.1 x 001 003 x)-from the file 'U3D.8bi '.

  Fresco 17.0.1 - from the file 'filter Gallery.8bf'

  Glass 17.0.1 - from the file 'filter Gallery.8bf'

  Scarlet contours 17.0.1 - from the file "Filter Gallery.8bf"

  Google Earth 4 17.0.1 (2015.5.1 x 001 003 x)-from the file 'U3D.8bi '.

  Grain 17.0.1 - from the file 'filter Gallery.8bf'

  Graphic pen 17.0.1 - from the file "Filter Gallery.8bf"

  Halftone Pattern 17.0.1 - from the file 'filter Gallery.8bf'

  HDRMergeUI 17.0.1 - from the file 'HDRMergeUI.8bf '.

  HSB/HSL 17.0.1 - from the file "MultiPlugin.8bf series"

  IFF Format 17.0.1 - from the file "MultiPlugin.8bf series"

  IGES 17.0.1 (2015.5.1 x 001 003 x)-from the file 'U3D.8bi '.

  Ink outlines 17.0.1 - from the file 'filter Gallery.8bf'

  JPEG 2000 17.0.1 - from the file 'JPEG2000.8bi '.

  Flattening coefficient 17.0.1 (2015.5.1 x 001 003 x)-from the file 'statistics.8ba '.

  Lens Blur 17.0.1 - from the "Lens Blur.8bf" file

  17.0.1 Correction lens - from the "Lens Correction.8bf" file

  Lens Flare 17.0.1 - from the file "MultiPlugin.8bf series"

  Liquefy 17.0.1 - from the file 'Liquify.8bf '.

  Matlab 17.0.1 operation (2015.5.1 x 001 003 x)-from the file 'ChannelPort.8bf '.

  maximum 17.0.1 (2015.5.1 x 001 003 x)-from the file 'statistics.8ba '.

  Mean 17.0.1 (2015.5.1 x 001 003 x)-from the file 'statistics.8ba '.

  Measure Core 17.0.1 (2015.5.1 x 001 003 x)-from the file 'MeasurementCore.8me '.

  Median 17.0.1 (2015.5.1 x 001 003 x)-from the file 'statistics.8ba '.

  Mezzotint 17.0.1 - from the file "MultiPlugin.8bf series"

  Minimum 17.0.1 (2015.5.1 x 001 003 x)-from the file 'statistics.8ba '.

  MMXCore routine 17.0.1 (2015.5.1 x 001 003 x)-from the file "MMXCore.8bx.

  Mosaic 17.0.1 - from the file 'filter Gallery.8bf'

  Multiprocessor support 17.0.1 (2015.5.1 x 001 003 x)-from the file "MultiProcessor Support.8bx.

  Neon 17.0.1 - from the file 'filter Gallery.8bf'

  Note article 17.0.1 - from the file 'filter Gallery.8bf'

  Color NTSC 17.0.1 (2015.5.1 x 001 003 x)-from the file "NTSC Colors.8bf.

  Ocean Ripple 17.0.1 - from the file 'filter Gallery.8bf'

  OpenEXR 17.0.1 - from the file "MultiPlugin.8bf series"

  Paint the 17.0.1 - from the file Daubs 'filter Gallery.8bf'

  17.0.1 - from the file palette knife 'filter Gallery.8bf'

  Patchwork 17.0.1 - from the file 'filter Gallery.8bf'

  Paths to Illustrator 17.0.1 - from the file "MultiPlugin.8bf series"

  PCX 17.0.1 (2015.5.1 x 001 003 x)-from the file 'PCX.8bi '.

  Photocopy 17.0.1 - from the file "Filter Gallery.8bf"

  3D Photoshop 17.0.1 engine (2015.5.1 x 001 003 x)-from the file 'Photoshop3DEngine.8bi '.

  Photoshop Touch 14.0 - from the file 'PSDX.8bi '.

  Photo filter package 17.0.1 (2015.5.1 x 001 003 x)-from the file 'ChannelPort.8bf '.

  Pinch 17.0.1 - from the file "MultiPlugin.8bf series"

  Pixar 17.0.1 (2015.5.1 x 001 003 x)-from the file 'Pixar.8bi '.

  Plaster 17.0.1 - from the file "Filter Gallery.8bf"

  Film plastic 17.0.1 - from the file "Filter Gallery.8bf"

  PLY 17.0.1 (2015.5.1 x 001 003 x)-from the file 'U3D.8bi '.

  17.0.1 - from the file PNG "MultiPlugin.8bf series"

  Pointillism 17.0.1 - from the file "MultiPlugin.8bf series"

  Polar coordinates 17.0.1 - from the file "MultiPlugin.8bf series"

  Portable Bit Map 17.0.1 (2015.5.1 x 001 003 x)-from the file 'PBM.8bi '.

  Poster edges 17.0.1 - from the file 'filter Gallery.8bf'

  People's Republic of CHINA 17.0.1 (2015.5.1 x 001 003 x)-from the file 'U3D.8bi '.

  Radial blur 17.0.1 - from the file "MultiPlugin.8bf series"

  17.0.1 radiance (2015.5.1 x 001 003 x)-from the file 'Radiance.8bi '.

  17.0.1 range (2015.5.1 x 001 003 x)-from the file 'statistics.8ba '.

  Grid search of colors made NO VERSION - from the file 'Export3DLUT.8be '.

  Crosslinking 17.0.1 - from the file 'filter Gallery.8bf'

  Ripple 17.0.1 - from the file "MultiPlugin.8bf series"

  Rough Pastels 17.0.1 - from the file 'filter Gallery.8bf'

  Save for Web 17.0.1 - from the file "save for Web.8be".

  ScriptingSupport 17.0.1 - from the file "ScriptingSupport.8li.

  Shake Reduction 17.0.1 - from the "Shake Reduction.8bf" file

  Shear 17.0.1 - from the file "MultiPlugin.8bf series"

  17.0.1 asymmetry (2015.5.1 x 001 003 x)-from the file 'statistics.8ba '.

  Smart Blur 17.0.1 - from the file "MultiPlugin.8bf series"

  Smudge Stick 17.0.1 - from the file 'filter Gallery.8bf'

  Solarize 17.0.1 (2015.5.1 x 001 003 x)-from the file 'Solarize.8bf '.

  Spaces 17.0.1 - from the file 'Spaces.8li '.

  Splash 17.0.1 - from the file "Filter Gallery.8bf"

  Spherize 17.0.1 - from the file "MultiPlugin.8bf series"

  Sponge 17.0.1 - from the file "Filter Gallery.8bf"

  Sprayed strokes 17.0.1 - from the file 'filter Gallery.8bf'

  Stained glass 17.0.1 - from the file "Filter Gallery.8bf"

  Stamp 17.0.1 - from the file "Filter Gallery.8bf"

  SD 17.0.1 (2015.5.1 x 001 003 x)-from the file 'statistics.8ba '.

  STL 17.0.1 (2015.5.1 x 001 003 x)-from the file 'U3D.8bi '.

  Sumi-e 17.0.1 - from the file 'filter Gallery.8bf'

  17.0.1 summation (2015.5.1 x 001 003 x)-from the file 'statistics.8ba '.

  Targa 17.0.1 - from the file "MultiPlugin.8bf series"

  Texture veneer 17.0.1 - from the file "Filter Gallery.8bf"

  Tiles 17.0.1 - from the file "MultiPlugin.8bf series"

  Torn edges 17.0.1 - from the file "Filter Gallery.8bf"

  Twirl 17.0.1 - from the file "MultiPlugin.8bf series"

  U3D 17.0.1 (2015.5.1 x 001 003 x)-from the file 'U3D.8bi '.

  Draft 17.0.1 - from the file "Filter Gallery.8bf"

  Vanishing point 17.0.1 - from the file 'VanishingPoint.8bf '.

  Variance 17.0.1 (2015.5.1 x 001 003 x)-from the file 'statistics.8ba '.

  Virtual Reality Modeling Language. VRML 17.0.1 (2015.5.1 x 001 003 x)-from the file 'U3D.8bi '.

  Water paper 17.0.1 - from the file 'filter Gallery.8bf'

  Watercolor 17.0.1 - from the file 'filter Gallery.8bf'

  Wave 17.0.1 - from the file "MultiPlugin.8bf series"

  Wavefront | OBJ 17.0.1 (2015.5.1 x 001 003 x)-from the file 'U3D.8bi '.

  WIA support 17.0.1 (2015.5.1 x 001 003 x)-from the file 'WIASupport.8li '.

  Wind 17.0.1 - from the file "MultiPlugin.8bf series"

  Wireless Bitmap 17.0.1 (2015.5.1 x 001 003 x)-from the file 'WBMP.8bi '.

  Zig - zag 17.0.1 - from the file "MultiPlugin.8bf series"

  Plug-ins option and third parties:

  WebP Lossless NO VERSION - from the file "C:\Program Files\Adobe\Adobe Photoshop 2015.5\Plug-ins\WebPFormat64.8bi CC"

  WebP NO VERSION - from the file "C:\Program Files\Adobe\Adobe Photoshop 2015.5\Plug-ins\WebPFormat64.8bi CC"

  Duplicates and plug-ins disabled: NONE

  Plug-ins that could not load: NONE

  Extensions:

  Recent files 1.2.1 - from the file "C:\Program Files (x 86) \Common.

  com.adobe.InApp.Purchase 2.4.83 - in the file "C:\Program Files\Adobe\Adobe Photoshop 2015.5\Required\CEP\extensions\com.adobe.DesignLibraryPanel.html\purchase.html CC"

  Library 2.4.83 - from the file "C:\Program Files\Adobe\Adobe Photoshop 2015.5\Required\CEP\extensions\com.adobe.DesignLibraryPanel.html\index.html CC"

  Leave 1.2.1 - the file ' C:\Program Files (x 86) \Common.

  Color Adobe 6.1.0 - from the file "C:\Program Files\Adobe\Adobe Photoshop 2015.5\Required\CEP\extensions\com.adobe.KulerPanel.html\index.html CC" themes

  Export as 3.0.6 - from the file "C:\Program Files\Adobe\Adobe Photoshop 2015.5\Required\CEP\extensions\com.adobe.photoshop.crema\PSPanel\dialog.html CC"

  Overview of unit 1.2.0 - from the file "C:\Program Files\Fichiers Files\Adobe\CEP\extensions\com.adobe.preview20155\PSPanel\panel.html"

  com.adobe.preview.Loader 1.2.0 - from the file "C:\Program Files\Fichiers Files\Adobe\CEP\extensions\com.adobe.preview20155\PSLoader\loader.html"

  Export as 3.0.6 - from the file "C:\Program Files\Adobe\Adobe Photoshop 2015.5\Required\CEP\extensions\com.adobe.photoshop.crema\PSPanel\dialog.html CC"

  Install TWAIN devices: NONE

  Sorry for the late reply. I fixed it as follows. It was not enough to run the drop as an administrator, but to give administrator rights for all users (right-click the drop-> properties-> compatibility-> settings for all users-> check "Run as Administrator"). On another device, I also had to do the same thing with Photoshop itself to run the drop.

  For current work, I disabled the need to accept any request of the administrator (search-> Type "UAC").

  Guess that's the best temporary solution.