Could this kind of hardware run battlefield 3

Similar Questions

• Replacing hard drive, made restoration of the factory, get the message error "installing windows could not configure windows to run on a hardware on this computer."

  OS = Windows 7

  Computer = Gateway FX6840
  Media = gateway recovery media
  Hard drive is set to AHCI in BIOS

  I started meeting with S.M.A.R.T. errors.

  I backed up my data.

  I replaced 1 TB Seagate original with a new 2 hard drive to Seagate Barracuda SATA STBD2000101. Computer is equipped also is from the factory... no additional or modified facilities.

  I tried to restore Windows 7 from the rescue of the disks created with the "Gateway Recovery Management"

  Windows copying files over, the machine restarts, it installs the devices, then it stops at the "installation program starts services" and a window opens with the message "windows Setup could not configure windows to run on a hardware on this computer.

  I can't apply the Article ID: 2466753 because the process of restoration of the plant seems not provide an option to load a driver .

  Any help would be appreciated... Gateway is only interested to collect money.  They have no interest in serving the poor suckers who buy their products (computer is 2 years old so it is out of warranty).

  Thanks for the reply.

  Fortunately, I solved the problem myself (after 19 hours of stress).
  The problem is that the recent hard disk has something different that no longer ages and makes pre-service pack 1 (SP1 solves the problem) versions of Windows 7 incompatible. My set of recovery disks have been created the day I bought the computer, which had no windows updates installed at the time.

  There is an "easy solution" on the Microsoft support site: http://support.microsoft.com/kb/2466753/en-us

  Unfortunately, their method works only if you have a Windows 7 installation disc, which does most of the people who buy computers pre-built manufacturers. Essentially, the solution is to install SP1 from a disc when don't give you the possibility to load drivers during installation, an option that the gateway recovery disks.

  So I thought that, theoretically, if I use my recovery discs to get a clean install on a hard drive that works, then use windows update to get updated (or at least to get SP1), and then make a set of NEW recovery disks (using windows backup: start > all programs > maintenance > Backup and Restore), I should be able to use these discs to install the new hard disk.

  It worked.

  So for someone else who has this same problem with new hard disks, I hope that the above is easy to understand. If not, ask someone else more savvy and show them this thread. Do not forget that at the end to create new recovery disks, it will ask you if you also want to create a 'system' repair disc. DO THIS! This is the disk that you need to start from when you are ready to install.

  Also: If your new hard drive is bigger than the one that you have created the new recovery disks, the partition on your new hard drive (once everything is installed) will be the same size as the one that you have created the records on. You will need to use a kind of editor of score for re - size. I recommend Gnome Partition Editor. http://www.gparted.org

  Burn gparted Live CD and him, resize your partition, and you're done (google for more in-depth instructions).

  Thank you, theloungelizardK, for the offer on the ISO, but I don't need. :)

  Eastan - ITF

• HP dv6 7214tx: windows Setup could not configure windows to run on this hardware

  Hello

  I know it has been posted similar problems before, but I still can't get on my instalation.

  I came to this point: during installation PROCESS, almost at the end of this message pop up "'WINDOWS Setup COULD NOT CONFIGURE WINDOWS TO RUN on THIS COMPUTER HARDWARE".

  My PC is: ENVY dv6 7214tx

  3rd gener. Intel Core i7-3630qm

  processor 2.4 GHz

  1 TB HARD DRIVE

  8192 MB DDR3 SDRAM

  Blu - ray optical drive

  Windows 8

  NVIDIA GeForce graphics card

  WLAN & Bluetooth

  I changed boot to the DVD - ROM option, SUPPORT of LEGACY enabled, disabled SECURE BOOT.

  What it might useful to you guys, it's the actual installation takes apx. 5 hours, then he came to the point of pop up window mentioned above.

  Do you have any suggestions please?

  Thank you very much

  .. .also even if this driver has been loaded to the top, another window pops up and says smth like "the driver is not signed, and it might not work.

  However, I let it install... I'll see

• Windows Setup could not configure windows to run on a hardware on this computer

  HP Pavilion Sleekbook 15-b023cl

  I tried to install Windows 7 on my computer for the last day and after several attempts the same error message. It is said: "Windows Setup could not configure windows to run on a hardware on this computer." How would I go about fixing this problem?

  Thank you

  Hello:

  I'm not sure that there is a 'one size fits all' answer to this problem, if you google the error.

  The most common solution is to try to install the SATA driver.

  Here is the link to the SATA drivers you need for your model. Download and extract to a usb flash drive.

  First file listed is for 64-bit operating systems.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=22194&ProdId=2101&lang=eng&OSVersion... =

  Use the Drive Options - Advanced method to install and then select the option load a driver.

  If you check the box, only the compatible SATA driver is selected.

  See if it works.

• I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  Installed the new hard drive on my Toshiba laptop and when I ran my recovery disk, Windows Vista installed, but when I restarted computer I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  Help, please.

  Hello
   
  
  Your error message, the problem is probably caused by BIOS or DVD settings or bad cabling to SATA hard drive. Please do the following to narrow down because of the problem.
   
  (a) ensure that all laptops the same hardware, the same manufacturer and the same model.
   
  (b) upgrade the BIOS to the latest version; go into the BIOS and enable "Load Fail - Safe Defaults".
  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions
   
  Warning of the BIOS:
  BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
  
  (c) If you connect the SATA drives, please configure the SATA controller in compatible mode in the BIOS.

• 8024A 000 - Windows Update code does not work and "installing Windows could not configure Windows to run on a hardware on this computer" for Vista64 reinstall

  I have a HP Pavilion Elite e9180t PC comes with Vista Home Premium 64-bit.  I had the hard drive (Seagate/Barracuda 7200, 750GB) SATA to go over me (after the expiration of the warranty of course) so I replaced it with a WD Caviar Green 1 TB drive.  When I rebooted the news of recovery disk to the new disk, VIsta worked but Windows Update does not work and I get A 8024, 000 error Code.  To worked with Microsoft to try to resolve that (never made), I am frustrated and all saved just reinstall Vista.  When I try to reinstall Vista, I now get the message "installing Windows could not configure Windows to run on a hardware on this computer."  The installation progresses up to the stage of upgrade (a final) then I get error and it puts everything back the way I started.

  The only thing I changed hardware wise is the hard drive, so this error message seems silly because Windows runs on this material.  I even double checked that Vista is always enabled.  Anyone out there have any ideas?

  I have a HP Pavilion Elite e9180t PC comes with Vista Home Premium 64-bit.  I had the hard drive (Seagate/Barracuda 7200, 750GB) SATA to go over me (after the expiration of the warranty of course) so I replaced it with a WD Caviar Green 1 TB drive.  When I rebooted the news of recovery disk to the new disk, VIsta worked but Windows Update does not work and I get A 8024, 000 error Code.  To worked with Microsoft to try to resolve that (never made), I am frustrated and all saved just reinstall Vista.  When I try to reinstall Vista, I now get the message "installing Windows could not configure Windows to run on a hardware on this computer."  The installation progresses up to the stage of upgrade (a final) then I get error and it puts everything back the way I started.

  The only thing I changed hardware wise is the hard drive, so this error message seems silly because Windows runs on this material.  I even double checked that Vista is always enabled.  Anyone out there have any ideas?

  Hey GMPete

  some posters have reported problems when replacing a drive hp etc. with a hp motherboard not provided player etc.

  I suggest tha contact you hp because it's their recovery process you use

  at the below link HP support forums

  http://h30434.www3.HP.com/

  link below is for direct hp support contact us

  http://welcome.HP.com/country/us/en/contact_us.html

  Walter, the time zone traveller

• Windows Setup could not configure windows to run on this hardware

  I am trying to install Win 7 on a HP Pavilion dv6-7012tx laptop. He brings Win 7 by default. I installed win8 once. Now I can't reinstall win7 on laptop in May. He tried to install Windows 7, but when the computer restarts and tries to complete the installation, I get the following error: "Windows Setup could not configure Windows to run on hardware of Cet_Ordinateur."

  

  My laptop configuration:

  By default the operating system: Win7

  Processor: Intel 2nd generation Core i5

  GPU: NVIDIA GeForce 630 M

  Hard disk: 640 GB (SATA II)

  RAM: 6 GB DDR3

  Hello:

  If you use an ordinary W7 installation DVD and use no recovery disc, the most common cause of this error is the lack of SATA drivers.

  Download and extract these files on a usb flash drive. First file listed is for W7 64 bit.

  https://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=23060&Keyword=Intel+Rapid+Storage+Technology+(Intel+RST) & lang = fra

  Plug the flash drive into your laptop and start your installation of W7 DVD.

  When you get to install it now click on that and click the option advanced player options.

  Then choose load a driver.  You should now see all the sata on your USB drivers.

  You can check a box and it will include the compatible sata driver to install.

  Proceed from there, and I hope that will install W7.

• "Installation of Windows could not configure windows to run on a hardware on this computer."

  I recently released and bought 4 hard to present itself as a raid 10 disks, now I use my motherboards onboard fakeraid an ihc10r. The cables are fine and when I try and install windows 7 (64 x pro) on each disk with raid and ahci disabled in the bios, windows installs fine. Now when I raid raid 10 disks windows install can see the drive and even then, I load the drivers just to be sure that iastor.sys etc. (I tried with and without) is the same every time after the first reboot, I get about 10 minutes and 2 minutes after the resolution of the screen is adjusted BOOM "installation of windows could not configure windows to run on a hardware on this computer."

  First of all, then someone please help me get windows installed on my raid?

  Second, microsoft, your error messages leave much to be desired, it does not yet add a message in the Setup error log.

  EDIT: Forgot to add that I did a memtest and it happened, I also have the piece of garbage jmicron on my MB off the power. In addition, the facility produces when the SATA controller is in AHCI mode, BUT not in raid mode.

  Seems to me that if the software/driver is not compatible Windows 7. Also if any of the readers have reminants of your installation for each individual unit, Windows 7 may not be able to deal with formatting during the installation process. Try to download CD bootable diagnostic of the manufacture in car and do two things.

  (1) check each drive individually for issues.

  (2) wipe the drive (WD can for example remove the first and last part of the training which completely removes the MBR and other reminants for the final result is the drive looks like you just removed from the box and plugged in for the first time.)

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• I would like to delete a short gray border of two images. I need help because I'm still not able to use PhotoShop. Could someone kindly help me with this?

  I would like to delete a short gray border of two images. I need help because I'm still not able to use PhotoShop. Could someone kindly help me with this?

  In order to change a part of an image as needed here, I would use the "Liquify" filter See below, it is quite easy. You just move the lower lip to be more elegant and not like the guys are salivating.

  

• This computer is not running windows genuine, even if his OEM installed OS and I recently changed my dying HDD

  I've recently updated my old WD Scorpio Blue HDD(640GB) format tip of Hitachi 1 TB 7200 RPM HARD drive.

  When I entered the serial number at the back of the laptop, it has not be activated and so I opted for the path of phone activation. (this was happening before too and I used to activate the phone, but never I had windows is not an authentic message).

  Windows has been activated successfully, and then, suddenly, after two days, I get a message "this computer is not running genuine windows.

  It's strange, because I formatted and reinstalled so many times before in the past on the old HDD.

  As far as I know, the serial number is related to the motherboard of the system and not the HARD drive right?  So I don't get as to why is - that say windows is not genuine. The features of Windows Update is disabled for me...

  Details of the laptop:

  Acer Aspire 5740 G, intel i5, 4 GB RAM.

  Installed antivirus: Avast Internet security (under license).

  Is could someone please help me solve this problem? I really need your help...

  I ran the diagnostic tool and here are the metrics for your info:

  --------------------------------------------

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - 7RXDH - 7WJRY-7RWXV
  The Windows Product Key hash: znL + gtDjzVkjle9bRkUb78aZi84 =
  Windows product ID: 00359-OEM-9739176-04180
  Windows product ID type: 8
  Windows license type: COA SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {60926015-D8FF-4508-B929-FC2DBF7460BA} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140303 - 2144
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 103 blocked VLK
  Microsoft Office Enterprise 2007 - 103 blocked VLK
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100

  
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {60926015-D8FF-4508-B929-FC2DBF7460BA}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-7RWXV00359-OEM-9739176-041808S-1-5-21-665660579-3428823414-2099953851Acer Aspire 5740 Phoenix Technologies LTD.V1.22 20100318000000.000000 + 000945D3C07018400FC04090409India Standard Time(GMT+05:30)03ACRSYSACRPRDCT103103Microsoft Office Enterprise 200712ACD7202654E586fFic3JgCreGGRxyF8uMWB4R4Jcg = 89388-707-1528066-6544814

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_SLP
  Activation ID: 6a7d5d8a-92af-4e6a-af4b-8fddaec800e5
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00194-391-704180-02-1033-7601.0000-1422014
  Installation ID: 005341145813009622715733404012483761173336271660798603
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 7RWXV
  License status: initial grace period
  Time remaining: 39720 minute (s) on (27 day (s))
  Remaining Windows rearm count: 3
  Trust time: 23/05/2014 12:44:06

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 5:22:2014 01:11
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current Hash HWID: LgAAAAEAAQABAAEAAAACAAAAAgABAAEA6GEC04LDSiaoQfTmYj3A6E7LHLVcXQ ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP INTEL CALPELLA
  HPET INTEL CALPELLA
  START PTLTD $SBFTBL$
  MCFG INTEL CALPELLA
  SLIC ACRSYS ACRPRDCT
  SSDT PmRef CpuPm

  ----------------------------------------------------------------------------------------------------------------------------------

  Kind regards

  SUS.

  Hello

  You have reinstalled the Intel Rapid Storage Technology drivers.

  This can simply be caused by a bad set of drivers of technology Intel Rapid Storage Technology:

  Installation at the time Intel Rapid Storage Drivers download and install from here:
  http://www.Intel.com/p/en_US/support/highlights/sftwr-prod/IMSM

  You can also refer to this thread and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/0x8004fe21-error-not-genuine-on-a-genuine-Windows/06667718-646e-E011-8dfc-68b599b31bf5

  I hope this helps.

• "this computer is not running a genuine version of windows" I know that this version is authentic. How can I fix it?

  I get a window that says "this computer is not running a genuine version of windows" I know that this version is authentic. There is a link that says "resolve online", I clicked on the link and downloaded something. I went to open it, but I was warned that he could not identify the Publisher so I cancelled. This warning appears at regular intervals. What should I do?

  Your report does not indicate that a problem.

  apply the next update if you do not have and see if it solves the problem, then:
  http://support.Microsoft.com/kb/3024777

  Restart, then wait a bit to see if the problem is resolved, if not:
  then:
  Click Start, right click on computer
  Click on properties
  Scroll down to the Windows Activation
  Click on the link 'change product key '.
  Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.
  COA certificate of authenticity:
  http://www.Microsoft.com/howtotell/content.aspx?PG=COA
  ??
  What is the certificate of authenticity for Windows?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity
  or
  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  (6) explain your problem clearly to the support person.

  http://support.Microsoft.com/kb/950929/en-us

  If the problem persists:

  Check your hard drive for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  then

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  Wait and see if the problem is resolved later.

• This PC can't run windows 10

  This PC can't run windows 10
  There is no supported network devices

  I have the same problem, I can't believe only two of us have the same problem

  I want to upgrade to windows 10 Windows 7

  perhaps I misunderstood the message that I can get on the internet and the use of a wireless adapter belkin to connect to the internet is there a way around this problem

  could someone from microsoft or the microsoft community help

  Robert

  Please, take a breath and describe your problem in detail and in order.

  I see that you have a computer running Windows 7 (32-bit or 64-bit?  Which edition?) at the moment and you want TO upgrade to Windows 10.  For example, so that you can properly work your mind around it - a few questions...

  Are you ready to upgrade?

  How are your backups?  Made sure your consistent data (just the things important to you) backups are working correctly and can be restored from?

  What your support installation and key product / series number backups - all that sorted and easily accessible?

  Have you checked, while visiting with the manufacturer of your system and the manufacturers of the software, you use most on your computer, all what you have/use/want to use are supported by said manufacturer with 10 windows and discovered that, instead, you need to do to continue the use of a stringer of such things after the upgrade?

  Some device drivers upgraded, you need to download?

  A software patch?

  Uninstall the software before upgrading to Windows 10 and install it once the upgrade is complete?

  You have refined a method of execution to a COMPLETE PICTURE of the right SYSTEM backup before you start the upgrade? After all the upgrade to Windows 10 Windows 7/8.1 could be likened to move coverage while stand you on it - so it is quite complex and has its risks.  Backup offline during the upgrade (and external) media image full system is a VERY good backup plan in case something goes wrong or - you don't like it.

  • System - Windows 7 Image backup
  • Windows 8.1 - System Image backup

  You might even want to clean this system some current, make sure * it * is as healthy as it could be before attempting to upgrade.  An efficient and up-to-date system is more likely to result in a smoother experience for an upgrade is as broad as this...  You could look through this previous conversation where I suggested someone clean up their system before the upgrade:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-update/scheduling-the-upgrade-to-Windows-10-not-working/13e88e85-2919-4e20-847E-94073e48090c

  Some links that would be different from those in the above suggested cleanup link - if you have WIndows 7 and not Windows 8.1 (and want to do the same cleanup)...

  Disk Cleanup: http://www.sevenforums.com/tutorials/818-disk-cleanup-open-use.html

  SFC/scannow: http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

  Defragment: http://www.sevenforums.com/tutorials/11733-disk-defragmenter-open-use.html

  When you think you're ready...

  Use the page web media creation tool to kick off your upgrade.

  The big take away there are: the device drivers, software updates and BACKUP BACKUP BACKUP!

  You could even make a full image backup of your current system and CLEAN install Windows 10 using your product key Windows 7/8.1 (from - likely - your product key on your machine sticker) and start completely cleaned with 10 Windows - install everything you want or need and restore your personal/etc of your latest files backups of files/folders (not the picture of the system.)
      
  Then, if things do not work on (pilot devices, software, etc.), you can use the system image backup to restore State "pre-fact-anything that it" and continue on.  ;-)

• Everything started getting the message "this computer is not running genuine windows.

  I started getting the message "this computer is not running genuine windows.

  I tried re-activate online and still get the message.

  I tried activating by phone and still get the message.

  The message is on the screen and ran up MGADiag and got the following:

  Can anyone help?

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: genuine
  Validation code: 0

  Code of Validation caching: 0x0
  Windows product key: *-* - KM9W6 - FQ6CV - 676B 3
  The Windows Product Key hash: wzer4Vgu/82pZnlLT5clC4N1KMY =
  Windows product ID: 00371-OEM-9072953-34635
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {FB5EAF24-648F-41E9-99B4-E2F77A0E94A3} (3)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140303 - 2144
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  2007 Microsoft Office system - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395]
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395]
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385]
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385]
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385]
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385]
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385]
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0]
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0]
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\en-us\user32.dll.mui[6.1.7601.17514]

  Other data-->
  Office details: {FB5EAF24-648F-41E9-99B4-E2F77A0E94A3}1.9.0019.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-676 B 300371-OEM-9072953-346353S-1-5-21-807467245-3392229789-2570558715Sony CorporationVGNZ790DINSYDER4044M320091110000000.000000 + 00022C13A07018400F804090409Eastern Standard Time(GMT-05:00)03SonyVAIO1001002007 Microsoft Office system12278FF0D99FEF5AE7Nm6Skf12U + IkMGoB/sNA1ilGbw =89451-OEM-6672725-13787 4

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_NSLP
  Activation ID: e120e868-3df2-464a-95a0-b52fa5ada4bf
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00180-729-534635-02-1033-7601.0000-3622014
  Installation ID: 009885890881275631194586153296712880021192777835802025
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 676B 3
  License status: licensed
  Remaining Windows rearm count: 3
  Trust time: 01/04/2015-16:56:14

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: 0x00000000
  Beyond: 0x000000000001EFF0
  Event timestamp: 3:30:2015 21:34
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current Hash HWID: NgAAAAEAAwABAAIAAAABAAAABAABAAEAln2yeEKnUrCCCPYEgM + iYc7tZGKzbACmhIWA8UbK

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0x0
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC Sony VAIO
  Sony VAIO FACP
  Sony VAIO DBGP
  HPET Sony VAIO
  Sony VAIO BOOT
  MCFG Sony VAIO
  SLIC Sony VAIO
  ASF! Sony VAIO
  SSDT Sony VAIO

  Hi Mark,

  Please contact the Microsoft community.

  This problem can be caused, if any material changes or if the chips are corrupt.

  • You did significant hardware changes to the computer?

  Please follow the method below and check if this can help:

  When you troubleshoot problems activating Windows, you may need to rebuild the Tokens.dat file.

  This article lists the steps to rebuild the Tokens.dat file.

  https://support.Microsoft.com/en-us/KB/2736303?WA=wsignin1.0

  Follow the article below for your reference and check if this can help:

  http://Windows.Microsoft.com/is-is/Windows/help/genuine/FAQ

  As it is an OEM computer, I suggest you contact Sony support if the problem persists.

  http://eSupport.Sony.com/us/p/select-System.pl?Director=driver

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help.

• This computer is not running windows genuine with error HrOffline: 0x8004FE21.

  Original title: this computer is not running genuine windows...

  So, I had this PC for about 3 years now, and even more. Since this computer was bought so long ago and not even by me, but my mother, I don't know where all the CD or have papers for it. However, I know for a fact that this computer IS running Windows. I've never had this problem before. It started to appear about 4 days ago. I read everywhere and I'm not entirely sure what I need to do about it because it seems that there are many different solutions to this problem. The only new thing I added to this computer was wifi. I added a TP-Link 450 Mbps Wireless-N dual band PCI Express Adapter. TL-WDN4800 model number. I had to open the computer, put it in and install the stuff that goes with it. I did about a week or two before this message starts to appear. I don't know if this could be the reason for the message «this computer is not running genuine windows...» "is displayed.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - 73CQT - WMF7J-3Q6C9
  Windows product key hash: RmurcM3ZxzWyfEP9WtPUJw = + KaFG
  Windows product ID: 00359-OEM-8992687-00010
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7600.2.00010300.0.0.003
  ID: {902D3DE7-22CC-4313-B67B-77E9F5BD0FA8} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7600.win7_gdr.130318 - 1532
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7600.16385], Hr = 0x800b0100

  Other data-->
  Office details: {902D3DE7-22CC-4313-B67B-77E9F5BD0FA8}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-3Q6C900359-OEM-8992687-000102S-1-5-21-4003750831-1906939945-749706782Hewlett-Packardp6715fAmerican Megatrends Inc.. 6.14 20101105000000.000000 + 00008B93607018400FC04090409Time(GMT-05:00) Standard is03HPQOEMSLIC-CPC109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800010-02-1033-7600.0000-2052009
  Installation ID: 014663125430160295483655688094396604208084972533908496
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 3Q6C9
  License status: licensed
  Remaining Windows rearm count: 2
  Time to trust: 23/08/2014-20:04:05

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 8:22:2014 23:29
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current Hash HWID: LgAAAAEAAAABAAEAAQACAAAAAgABAAEAliuq8PB1jt4qFsQxAkwvAyys7DZcXQ ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HPQOEM APIC-SLIC-CPC
  FACP SLIC-CPC HPQOEM
  HPET SLIC-CPC HPQOEM
  MCFG SLIC-CPC HPQOEM
  SLIC SLIC-CPC HPQOEM
  LASRYVITRAGE HPQOEM SLIC-CPC
  SSDT HPQOEM SLIC-CPC
  GSCI HPQOEM SLIC-CPC
  SSDT HPQOEM SLIC-CPC

  Try the solutions in the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/after-running-happily-for-a-couple-of-years-IM-now/fa800e6c-E405-46E8-8c1A-9c59629df404

• I have Windows 7 genuine, but I get messages saying that this computer is not running genuine Windows

  I get the message of Windows Activation technologies "this computer is not running Windows" for the last few days. When I click on 'Set online now' it takes me on the Microsoft site and offers I buy the new sofware. My Windows 7 is genuine and has been installed on my Sony Vaio again, so obviously I don't want to buy it again. After reviewing on community support area, I saw that MGADiag generates a report that could help solve the problem and it is copied below. Any help would be welcome.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - VGV87 - C7XPK-CGKHQ
  The Windows Product Key hash: sdEjrEJjW0FuXAhegYxl8GAkBYg =
  Windows product ID: 00359-OEM-8992687-00016
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {0FF6FE5D-A4FF-4177-A5B3-55B6F949C3AB} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130318 - 1533
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-604-645_B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-

  517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {0FF6FE5D-A4FF-4177-A5B3-55B6F949C3AB}

  1.9.0027.0 6.1.7601.2.00010300.1.0.003 x 64 *-

  -*-* - CGKHQ00359-OEM-8992687-000162S-1-5-21-641730022-471733996-

  4250773794Sony

  CompanyVPCEB11FDAmerican Megatrends

  Inc.. R0300Y8

  minor = '6' / >20100720000000.000000 + 000B55C3C07018400FC10090

  409GMT Standard Time (GMT 00:00)

  0 3 Sony

  VAIO109<>

  tions / >

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800016-02-4105-7600.0000-0192010
  Installation ID: 006076260434377233206665676742955105973341850993364523
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: CGKHQ
  License status: licensed
  Remaining Windows rearm count: 4
  Trust time: 28/09/2013 18:55:34

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 9:22:2013 19:28
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current Hash HWID: MAAAAAEAAwABAAEAAAABAAAAAgABAAEA6GHy6bq ++ kVSxx7uGP9GKlhLNjgyiVxd

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC Sony VAIO
  Sony VAIO FACP
  HPET Sony VAIO
  MCFG Sony VAIO
  SLIC Sony VAIO
  SSDT Sony VAIO
  SSDT Sony VAIO

  I wish to support engineers learn to read a diagnostic report.

  The common cause for these mismatches is a defective Intel Rapid Storage Tech driver

  Download and install the latest version of...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=22194

  you want this one: iata_enu.exe

  Restart then run another MGADiag report and view the results.