Count the days of Conesutive for the events occur?

Similar Questions

• How can I count the pulses in a channel?

  Hello

  I have a channel consisting of 0 and 1 (data comes from a proximity sensor) and I was wondering if there is an easy way to count the events (i.e. pulse) to (Advanced) Tiara? At its simplest, I just need a method to count the number of rising edges in the channel.

  A script would be the way to do this? If so, is there any example autour code to demonstrate how to analyse the lines in a channel?

  Thank you

  PorridgeMan.

  Hello!

  @Martin: IMHO your aproach can operate, but need not because of input data and the right compares value (10 in your case).

  If the input data are not a pure 0-1 step you can get more the a value greater than 10 for a rising edge.

  The comparison value depends on the distance of time and the channel values, and it's not easy to calculate in advance.
  The other drawback I see is that you need a channel of X, which is not really necessary to solve the problem.

  I think my code will be more robust (IMHO as I mentioned).

  @PorridgeMan: Yes, it's a shame it takes certain steps of DIAdem to solve this common problem.

  First: By script is possible, but generally to slow down. My approach is to insert a 0 value at the beginning

  a copy of the input channel table and compare it to the input string. If a value is less than 0,5 (half of you maximum values)

  and the other is higher I put a 1 0 otherwise in a result string. Even in more complicated cases, the comparison value could

  be calculated or alienated by a moving average.

  Here is the code:

  Option Explicit
  
  ' Copy data
  Call ChnCalculate("Ch(""[1]/Dif"")=Ch(""[1]/Pulses"")")
  ' Insert one 0 at the beginning
  Call DataBlInsertVal("[1]/Dif",1,1,0,0)
  ' Compare and convert result to 1 or 0
  Call ChnCalculate("Ch(""[1]/Result"") = IIf((Ch(""[1]/Pulses"") < 0.5) And (Ch(""[1]/Dif"") > 0.5), 1, 0)")
  ' Sum is result
  Call MsgBox(Cch("[1]/Result",4))
  

  Hope this helps

  Matthias

• Time after the event, without blocking the user

  Hi, I am creating a software to control a power supply. One feature that I have bad to add is a timer.

  I have a structure for the event that fires when the user clicks on the buttons, which most slowly increases the current for a period defined by the user. I want the timer to count so far defined by the user of time (in seconds) after the event fires. One thing, however, is that I need to be free to trigger another event (which stops the power supply in an emergency) so I can't have this synchronization process lock me up for snap buttons.

  I was experimenting with the millisecond timer, as well as with a loop that goes through with a defined time interval, but it is not quite give me the functionality I want. (I've been placing these loops of timing outside the structure of the event to other events run yet, but I want the timer to only is triggered after an event is triggered, is it still possible?)

  If you need more information, just ask, thanks!

  Thnigs to do to dramatically improve your code:

  You need not separate loop.  Put your code from timer inside the structure of the case of timeout event.  Set the time-out to 50 instead of 500 to match what is in your separate loop.  You can get rid of the becaue of queue, it is no longer necessary.  Create registry to offset on the main loop.  When the event occurs to start timer, pass the time for the shift on the right side register.  Wire the shift register on the left side in the event of timeout to use its value.  BTW, the shift in your separate loop register is used to nothing because you do not change the value on the wire.  Don't put all the loop in the case of timeout, get rid of the loop and just put the code of the loop, with the exception of the EndTime variable that can be removed and 50mS delay, which can be removed.

  Put the Boolean value of early Inc. inside the case to start Inc. value change event.  Same for all Boolean values.  Put them in their cases of particular event.

  Get rid of local variables now.  You'll race conditions if you do not, you doing wrong in that you don't need especially now.  Look at the current limit control.  Add a wire from the control of the current limit to where feeds the local variable of the current limit.  Delete the local section.

  Move all the controls from the inside of the structure of the event outside the structure of the event, but still within the main loop.  Wire controls where they are going.  Now you can eliminate all local variables of thos and just wire from control where they are needed.

  All outputs error.  One is enough.  Create an error in your front panel.  On the block-diagram wire the error in the first function of Sorrensen before the loop.  Where the error from the Sorrensen hit the loop function, change the terminal on a shift register (right click and select replace with shift register).  Move the error Out 2 to out of the loop on the right side.  Error 2 wire the register shift on the right side.  Everywhere, you need a mistake in, branch off the error in the thread because it is in the loop.  Wire all your outs of the error in the case of the event and the last Sorrensen function to a function of merge error.  Wire of this error on the shift register.  All your errors are combined in a single indicator.

  That should do for now.

• Count the number of hours between the dates off holiday/weekend

  Hi all
  
  I've not worked with dates and was recently asked to create a report where I am looking for the number of hours between two dates only count business days.
  
  So for example I have given as follows
  
  Created on 2011-03-30 15:00
  Treaty of 2011-03-30 15:03:46
  Filled 2011-04-01 17:25:02
  Posted 2011-04-01 17:45
  
  For a total of looking for the CREATION and dates
  
  50 hours and 45 minutes
  
  IM also trying to exclude weekends and holidays, I read around and was able to also find an array of dates where I main date, the HOLIDAY_IND column, and the column WEEKDAY_IND
  
  If the calendar table I have looks like
  
  CALENDER_DATE HOLIDAY_IND WEEKDAY_IND
  2011-03-31 YY
  2011-04-01 N Y
  2011-04-02 N N
  
  IM really very puzzled to know where to start
  
  I thought I'd try to write with PL/SQL, but I don't have access of the user to create procedures/functions, so looks like right up to SQL
  
  Any help is appreciated!

  Hello

  Depeneding on your data and your needs, you can do something like this:

  SELECT     created_DATE,
  ,     mailed_date
  ,     24 * ( (mailed_date - created_date)
            - (
              SELECT  COUNT (*)
              FROM        table_o_dates
              WHERE    main_date > created_date
              AND        main_date < TRUNC (mailed_date)
              AND        (   holiday_ind = 'Y'
                       OR  weekday_ind = 'N'
                    )
            )
             )               AS hours_between
  FROM     table_x
  ;
  

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all tables and also post the results desired from these data.
  Explain, using specific examples, how you get these results from these data.
  Always tell what version of Oracle you are using.

  What do you do if created_date or mailed_date is not a working day? Examples in you data and results.

• 24 v digital signal of the event from the host to the fpga power on/off

  Hello forums or

  Sheet material

  cRIO-9074

  module or 9472 digital module 24 V output c series

  To expand on the topic described,

  I want to be able send a trigger to alarm the fpga digital 9472 out that lasts 30 seconds using the operating system time real clock time on the host computer

  The way I approached this problem is that

  In the loop where the event occurs, if the event trigger is defined then the fgv has a time stamp when the event occurred is sent.

  In the loop that communicates with the control of fpga, I write to the control based on the condition that the difference of the current time checked and fgv time is 30 seconds or less, then it will send the value true, otherwise send fake and wait for the next occurrence of the event.

  The main problem after implementation of this is that 9472 led does not turn off when the false value is sent to it.

  cordially Mzamanstl

  Timer Keeper SD is a FGV so that it is written for her, once the event occurs

  So if the event occurs so timestamp is stored and then the difference of the timestamp result is<30>

  then a true value will be sent to the module of 9472

  So basically I want the light and I want to do the 24 v output for 30 seconds then turn off and wait for the next occurrence

  I think the method that I test it with is not very good, because I realize other factors that may contribute to this problem, so I think I found another way to test

  and I will try it but its will take time.

  cordially Mzamanstl

• Can I use Ctlref in a structure of the event with a mouse to an event?

  I have a large number of controls on a front panel. I use a structure of the event that triggers the movement of a given motor when you press the corresponding button. However, I would like to avoid creating events for identical most of N, so I relied on the use of a mouse down on the front panel event, then retrieve the reference command using the Ctlref node (with gives 'Reference to the control on which the event occurred', according to manual labview) and analyze an array of references to know which engine is supposed to move. However, it seems that this node is not (contrary to what the manual said).

  I found other ways to do what I need (I thought using a table containing details of my controls and the coords in the structure of the event node), but I wanted to know why I can't find this node (that is displayed for the event "value change" for example). I'm using Labview 2013.

  No luck for you. Mouse down on the Panel does not have the refnum control because it does not work on a control. Mouse down on a control has it, and since you can configure the mouse down events on multiple controls in the same case of event, it also provides a refnum of control so that you can still use the order in question.

  This is probably also the question that Jeff might have seen. When you set up multiple events for the same frame that LabVIEW displays only the terminal event that are present in all of these events. Terminals that do not exist in at least a specific event of the multiple events for this image are more selectable.

• Behavior of structure the event when a property of the control is changed

  Hello

  Is the normal operation of VI attached? Why the change of ownership of a random control would affect the behavior of an event structure?

  THX

  

  Don't don't never use a structure of the event within a structure of the event.

  Reading guard and recommendations when using events in LabVIEW

  What you saved to lock the hard VI, is that you turned off the setting of Panel lock before your event to their default value being checked.

  The reason why he reacts this way is that the component: the mouse to the top of the event occurs when you go and click on the toggle.  So as soon as you mouse down on the chain, this internal event structure already as the pane: mouse event queue to the top and runs immediately.

  (In fact, that while loop is useless because the while loop can execute only once.)

• Why not the preferences of the general calendar for "the day ends at:" only offers the possibility of 'am' and not 'pm '? And alerts for an event from 14:00 activate at the right time, but it's at 02:00.

  The "day starts at:" options correctly offer options of "midnight" through time "am" to "noon". Thus the "day ends at:" should have options starting with "midi" and moments of "pm" to "midnight", but instead, they are all time 'am '.

  And alerts for an event from 14:00 activate at the right time, but it's at 02:00. Maybe it's a consequence of the above.

  ???

  

• Y at - it a gadget or a widget or app or something that I could add to my office that counts the days since an event?

  For example. 11 days since the last accident, 453 days since the last soda consumed, etc. Running Windows 7.

  Do a Google search for: -.

  counter of days for windows 7

  and make your choice

• How can I 'include' a file different php depending on time? Work on a 'Happening Now' page for an event and the need to plan a different content to load as the day continues. Thank you!

  Work on a 'Happening Now' page for an event and the need to plan a different content to load as the day continues. Thank you!

  The event has class sessions all day (3 days). I would like the page happening now to show what classes are going on right now and what is coming up next. I was hoping just to separate configuration files and load them when necessary, but open to all suggestions.

  PHP has a powerful set of date and time functions.

  To do this is to create a DateTime object and then use conditional logic to include the files you want. A better way would be to keep the details in a database and use the time to retrieve and display the details you want.

  A DateTime object using:

  $now = new DateTime();

  $hour = $now-> format ('G'); This gives you time to the 24 hour clock.

  If ($hour == 13) {}

  It is between 13:00 and 14:00

  } else if ($hour == 14) {}

  It is between 14:00 and 15:00

  } ....

• Count the days back by year and month?

  In my doc, I have 7 text fields (Sun, Mon, Mar, sea, game, Fri, SAT). I use another field enter a date. When I enter an end date, I have 7 fields to be filled with dates. For example, if I enter the date field 06 18, 2016, I wish I had the 7 fields like this, Sun would show 12, Lun would show 13, AUT show 14, sea would indicate 15, game show 16, Fri would show 17 and Sam would have 18. I'm counting the days is backwards because I'm coming the weekend of date (always a Saturday).

  What I'm running is the month before sometimes will have 30 days, some months have 31 (and of course leap years). Thus, for example, if I choose 2 July 2016 days should come back like that, Sun should see 26, LUNs should show 27, Tue should show 28, sea should show 29, that game should show 30, Fri should show 01, Sam should show July 02.

  How can I do this correctly? I need a javascript smart thing to do. Can someone please help me with an example? Thank you.

  Here is a link to a sample form that shows how you can do this: http://acroscript.net/pdf/demos/populateWeek.pdf

  The script is located in the field Validate event entry date. Note that day fields use a special naming convention that allows a simplification of the code, so you have to use a similar model.

• Get the date range min/max for consecutive events.

  Hi all...

  I am fairly new to the programming of the DB and is working on some examples I picked up a few places. The database version is 10g R2.

  I would like to configure the data here and I can explain my requirement.

  create table table_1
  (product_id varchar2(25),
  region_id  number,
  event_id number
  event_date date,
  event_status number(1))
  /
  
  
  

  Now the data because it is->

  insert into table_1 values ('Prod-1',10, null, to_date('01-feb-2014','dd-mon-yyyy'),null)
  /
  insert into table_1 values('Prod-1',10, 1001, to_date('10-mar-2014','dd-mon-yyyy'), 1)
  /
  insert into table_1 values('Prod-1',10, 1001, to_date('20-mar-2014','dd-mon-yyyy'), 3)
  /
  insert into table_1 values('Prod-1',10,1002, to_date('01-apr-2014','dd-mon-yyyy'), 1)
  /
  insert into table_1 values('Prod-1',10, 1002, to_date('10-apr-2014','dd-mon-yyyy'), 3)
  /
  commit
  /
  
  
  
  

  If the table now contains the following data

  select * from table_1; 
  
  
  

  PRODUCT_ID REGION_ID EVENT ID EVENT_DAT EVENT_STATUS

  ------------------------- ---------- -------- --------- ------------

  Prod-1 10 1 February 14

  Prod-1 10 1001 10 March 14 1

  Prod-1 10 1001 20 March 14 3

  Prod-1 10 1002 1 April 14 1

  Prod-1 10 1002 April 10, 14 3

  Now, the condition is as follows:

  Above is the dates start and end for the tests on a product in a given region. The event_status column indicates the dates of beginning and end. Event_status = 1, for the date of beginning and the event_status = 3 of the end date.

  A new event is now coming from March 21 and ending on March 31.

  The power required is a product identifier / region; If there are events that are ending and then count the days, for example, 1001 to end on March 20, but now the new event begins on 21 March... and the new event ends on 31 March and event 1002 begins 01 - Apr... and so on.

  The output required for this is as follows:

  PRODUCT_ID REGION_ID EVENT_MIN_DATE EVENT_MAX_DATE

  ------------------------- ---------- -------------- --------------

  Prod-1 10 10 14 March 10 April 14

  The output should give a product identifier / region, when events are immediately after the other, out the min date of beginning and end of max for all these manifestations of "back to back".

  Now I wrote the code for this, but it goes into a purely 'loop' for application in PLSQL... But my head tells me that if the results are correct. the PLSQL implementation is not the most efficient and effective way.

  Can someone help me to form the query? I tried to use functions analytical min/max but it gives me the start and end dates back even if my events are not "back to back" or previous/succeed each other... so my query result is not quite correct.

  Am reading on the TYPE clause but would be grateful if someone could help me with this query... or any other form better to implement this event so PLSQL can be used. The database version is 10g R2.

  Thank you

  K

  PS - The number of such events back to back is limited to 4 and the events could be created in any order. But if someone could help me with the scenario above; am sure I could make a request addressed to any change in the order. :-)

  No this isn't a recursive with clause, perhaps the UNION ALL you got confused. She will work with 10g.

  Since there are 2 tables that you said, the block all_data brings together only the lines of the two tables. table_1 start_date and end_date are built from the event_status (where the max in group by).

• not all the events of the day on the notification screen

  Hello

  I can't get all the events of the day in the calendar widget on the screen of the notification of my iPad. Genius Bar and Apple Support are unable to solve. Can anyone help?

  Thank you

  for this I think should download sparse, ultra calendar application very simple, advanced and simplified

• Auto, judgment of 10 days after installation for the Windows Server 2008 R2 evaluation version

  Hello

  I downloaded and installed the Windows Server 2008 R2 evaluation version. Initially. It seems to work perfectly. According to Microsoft, the trial period is 180 days. However, ten days after the installationt (10 days for activation), the system began to stop automatically every half hour.

  For events, file system log event ID is 1074.

  The information for this event are below.

  The wlms.exe process has launched the power off computer Win2k8R2-1 (server name) for the NT AUTHORITY\SYSTEM account for the following reason:

  Other (unplanned)

  Reason code: 0x0

  Stop type: power off

  Please help solve this crucial problem.

  Best regards

  John Zhang

  John,

  For assistance, please ask for help in the appropriate Microsoft TechNet Windows Server Forum.
  
  Thank you & good luck.

• Windows could not connect to the System Event Notification service. As an administrator, you can view the log of the events system for more details

  Original title:

  Office blocked in the classic theme.

  This morning when I started my computer, I noticed that it displays the following error message:

  "Windows cannot connect to the System Event Notification Service service. This problem prevents limited users to logon to the system. As long as administrator, you can review the system the event log for more details on the reasons, the service has not responded. »

  I went through the event log and found three errors:

  Name of the error: Service Control Manager
  Event ID: 7022

  "The Windows Audio service hung on starting."

  Name of the error: Application Popup

  Event ID: 875

  "Pilot atksgt.sys has been blocked by a load."

  Name of the error: Service Control Manager

  Event ID: 7000

  "Atksgt service failed to start due to the following error:
  This driver has been blocked by a load.

  There is no new hardware or installed software, virus/malware analyses provided no results. The only effect I can see is that the office is stuck in classic mode and options for the Aero themes are disabled.

  Any help is appreciated.

  I would like to use system restore to set up Windows in a few days.