covers window disappeared after upgrade to Mac OS 10.2

Similar Questions

• Candidate in traditional Chinese Pinyin Input Method window disappeared after upgrade to El Capitan

  The candidate window disappeared when I use the traditional Chinese Pinyin input method. It will display the candidate window after I press the space bar, but now he entered directly the first option available in the list and I can not choose what Word to use. I just started experiencing this problem since I upgraded to El Capitan.

  Try to set up a new user account and see if you have the same problem when logged into that.

• Not able to scan with the preview after upgrade from Mac OS Sierra...

  After upgrading to Mac OS Sierra. I'm unable to use the preview to scan.  Before this upgrade, it worked fine.  The HP scanner software does NOT work something like OS 10.8 or 10.9.  Preview worked perfectly so far.  If anyone knows how to solve this problem, your contribution will be greatly appreciated.  Thanks in advance.

  Have you tried scanning with Capture of Image instead? It worked for me.

• How to make the window disappears after minimize instead of becoming the output of the image?

  How to make the window disappears after minimize instead of becoming the output of the image?

  Hi Sam,

  This issue may have caused due to infection by the virus or system files missing or damaged or because of the corruption of the user profiles. I would like to know some information about this problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message while starting?

  3. have you checked if the problem occurs on a different user account?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the Microsoft Safety Scanner and check if there is any threat of viruses found.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Method 2:

  Run the System File Checker scan and check if it helps. This will help you to find and replace missing or damaged system files.

  See the following article from Microsoft Support to run the System File Checker.

  http://support.Microsoft.com/kb/929833/en-us

  Method 3:

  If you have not checked if the problem occurs on a different user account are not, then try again to create a new user account and check if the problem persists. This is to check if the problem is caused due to the corruption of user profiles or not.

  See the following article from Microsoft Help to create a new user account.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  If the problem does not persist in the new user account, then try the steps in the following article from Microsoft Help to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  Please reply with the status of the issue so that we can better help you.

• Reinstall Windows 7 after upgrade to 8

  Hello. I wonder if it's LEGAL to return to Windows 7 after upgrading to Windows 8. I don't know the overview of consumption, but the final version since October 25. I have a laptop HP with pre installed Windows 7. I can simply restore Windows 7 and continue without a reactivation? How would this work? And what will happen on the disk to upgrade of Windows 8? I have an image of windows 7 to reinstall. I'm not worried about windows.old folder. I was wondering about the legality of the process.

  Thank you, Andre Da Costa for all info on how to do. While it was useful, but I wanted to know if it is legal to do so.

  Perfectly legal, because the machine has obtained a license for this.

• Configuration error 1 after upgrading to Mac OS Sierra (Illustrator)

  Hello world

  After that I have upgraded to Mac OS Sierra, some of my Adobe software started crashing. Adobe Acrobat XI opens but unexpectedly stops after a few seconds. But above all, Illustrator does not start. I get the Configuration error message (error 1) and suggested to uninstall and reinstall the software (which doesn't help).

  I tried to change the permissions for the files SLStore and Adobe PCD. And indeed, the permissions for Adobe PCD have been set to read only for the admin.

  Unfortunately, change the permissions did not help. I get the same error message. Also, once I have reinstall the software, change the permissions to read-only.

  It happened just after upgrading to Mac OS Sierra. I have no backup, so downgraded to El Capitan is not an option.

  Please help, the standard solution has not worked for me and I need Illustrator to survive.

  (I use a Macbook Pro; 13 Retina display. end of 2015; 2.7 GHz Intel Core i5 processor; 8 GB 1867 MHz DDR3 memory)

  Elkoban if you create a new admin account you encounter the same error?  You can find details on how to configure a new account Administrator install or run Adobe applications in the new user account. Mac OS X .

• After upgrading to MAC Mountain Lion, the drivers for my HP C4680 were removed (accidentlly)

  After upgrading to MAC Mountain Lion, the drivers for my HP C4680 have been deleted (accidentally). I downloaded the drivers from HP, but my Macbook it not install because the drivers are not available on Mac Store. How can I get the printer installed?

  Hello

  First of all, make sure you restart your Mac, and then try to add the printer again.

  If it persists, ensure that the USB port directly connected to your Mac and not via a USB hub or extention.

  Ensure that the USB is not longer than 2 m and check to see if that can help you.

  Also, if you have an iMac, be sure to plug the USB in the port at the back of the Mac and not in the Apple keyboard, which is not powered.

  Also, try to reset the printing system, then try to add the printer and check any changes:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now, click on the Plus sign and try to re-adding the printer.

  If none of the steps above does not lead to any progress, go to the library and place the HP folder to the trash.

  Enter PPD\Contents\Resources, search for C4600 and move the files to the trash, then try to add the printer again.

  Hope that helps,

  Shlomi

• Replacement of text disappeared after upgrade ios 10.0.1

  I have an ipad 9.7 pro and an iphone 5s

  I've updated the IOS 10 software and the iPad don't would not recognize the charge lead, the apple store has replaced the ipad. After receiving the new ipad, I went to restore from my latest icloud save.

  Since the update iOS 10.0.1 two devices I've lost replacing text on both devices.

  all my shortcuts for work disappeared.

  I tried to disconnect to icloud and re-start of the ipad so far no change.

  I don't have a mac computer.

  Hi rluschtinetz,

  If I understand your message that after upgrade to iOS 10.0.1 on your 5s iPhone and iPad 9.7 Pro, you're missing the replacement of text on both devices. With the help of text replacements are very practical and I will be happy to provide information on this.

  Restore from a backup of iCloud can take a long time depending on the amount of data included in the backup, you can check if the restore process completed by going to settings > iCloud > storage. Also, I want to make sure that you are connected to iCloud on both devices. Then check if you can see your replacements of text on one of your devices. If you have a recent backup of iTunes for one of the devices, you can also do a restore of the unit in question as well.

  Nice day.

• Content disappeared after upgrading iTunes

  Yesterday I updated my iTunes to 12.3.3.17. For the first time, the update has caused more of my content to disappear. I found everything in my music folder and dragged in my library, spent 10 to 15 minutes to download artwork for some albums that was missing and called TI overnight. I think everything is there now, except for my playlists, and for some reason it does not show the release date for one of my albums. (Yes, the column header is there) I know how to get my playlists to return, but is anyway so he can show once again the release date?

  See the empty/corrupted after upgrade/crash iTunes library.

  TT2

• 120 all-in-One desire: analysis of the problems with envy 120 all-in-One after upgrading to Mac OS 10.12 (Sierra)?

  Hello world

  My operating system is Mac OS Sierra 10.12, but the drop of HP does not include yet - that's why the "other" operating system.

  I just upgraded my Mac to 10.12 Sierra, and I've also updated software from my desire to 120. I have also reinstalled the HP utility software on my Mac. And Yes, I restarted my Mac several times too.

  Now, the challenges:

  1 120 feel like in his screen it does not find my computer when I try to scan to the computer. As if he cannot see it, even if the two computers and 120 are on the same network. This problem is new and was held just after the upgrade from Mac OS.

  2. Furthermore, when I try to activate the scan on my Mac computer, an error message appears telling me to update my software HP (see screenshot), although I've done.

  If someone had the same problem, and if you have, how you go about it?

  Thank you.

  

  Hello

  HP software full functionality is not yet available for Sierra, as you mentioned the ysstem functioning is not yet.

  You can scan with the application of ICA Apple (Image Capture or sweepers & Scanners), as well as thorugh HP Easy Scan you will experience, however, some issues you described, as this behavior with the scanning of the façade, this is a known issue with the software that should be fully updated for Sierra soon, it should be available soon, assuming that during the next weeks to come...

  You can insall HP Easy Scan 1.6.1 below and check if you are able to scan from it:

  Note: If there is already a HP Easy Scan of a previous version icon in the Applications folder, remove and empty the tash first.

  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_6_1.pkg

  Then, try to scan using HP Easy Scan and check if it works.

  If the front panel can now list your Mac, it probably, work if not to use the Scan on your Mac software for now.

  Kind regards

  Shloi

• Need Switchable Graphics for Windows 8 after upgrade?

  Hey guys,.

  I see several issues where people lose their switchable graphics after upgrade to Windows 8.

  Now, the only drivers graphic switchable which must be downloaded for future needs on the site of the factory which should be HP.

  Now, is the first step, we want to take

  • Check and see if your mobile phone is supported by Windows 8.

  You can check HERE to see if it is supported.

  If this isn't the case, then more than likely there will be no available drivers until the phone is supported.
  • If the laptop is supported by Windows 8 HP website and your product type # in the next selection > and then select the operating system > click Next > and look under the section that says "Driver - Graphic" and start the download.
  In addition, there are several places where you can find ' workaround ' meaning drivers, you can download switchable graphics 3 third-party sites. As AMD and Other installs

  Other facilities

  It will be the call to users to go and download these drivers. Now that could be a hit or miss.

  SO BE VERY CAREFUL OF ANYTHING TRY YOU AND DOWNLOAD IMITATING SWITCHABLE GRAPHICS DRIVERS.

  THX

  I hope it's useful!

  THX

• Reinstall Windows 7 after upgrading to Vista?

  I have my old watch office that I've upgraded from Vista to Windows 7, and after 4 years I want to reinstall Windows 7 to start fresh. The Vista that was on it, I have the disc Version of OEMs and for Windows 7, I have the disk that was given to me by the technology that made the upgrade for me after that he did the upgrade. It was made by the upgrade online. J' have the product keys for both. My question is: what I have to reinstall the Vista using the disk of Vista (and key) and then go back and reinstall Windows 7 using the Windows 7 disc (and key) or can I just do a custom installation using the disc of Windows 7 only and the product key for this? I just want to wipe all of my drive and start again with nothing other than the Windows 7 above. I've moved to Windows 8 on my new computer, but want to keep my old machine running Windows 7 (I'm sure that all your diehard 7 users understand why!). Please let me know how to do this.

  Thank you

  Just make a custom installation:

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Need to do a clean install of Windows 7 after upgrading with an Express upgrade

  I have a Dell, I used the improved anytime W7 home premum Pro on a 1 1/2 years. I need to do a clean install. How can I keep my o/s W7 pro? I have access to a W7 pro reinstall disk.

  The first thing you need to do is to get your key to Windows 7 Professional upgrade Express:
   
  An e-mail containing your product key will be sent to the e-mail address associated with your Windows Live ID account or e-mail address you provided if you ignored the account configuration. Note: If you use an email tool or spam blocker spam filter, be sure that you can receive e-mail messages from microsoft.com.
   
  What happens if I lose my product key?
   
  If you lose your product key, you can return to

  www.Windows7.com/GetKey and sign in using the "Sign In" link in the upper right of the page. This will allow to recover your product key if you have established your account with your Windows Live ID. If you do not configure a Windows Live ID account initially there is no record of your online product key. Check your e-mail since it is the only trace of your product key.
   
   
   
  or

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)
   
  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features.
   
  --------------------
   
  The next thing you need to do is to ensure that your data is backed up:
   
  http://notebooks.com/2010/12/27/how-to-backup-to-an-external-hard-drive/
   http://notebooks.com/2011/02/25/how-to-restore-a-backup-from-an-external-hard-drive-in-Windows-7/
   
  -------------------
   
  The next thing you need to do is to reinstall the base license that you upgraded, Windows 7 Starter Edition or Home Premium.
   
  If your computer is pre-installed with Windows 7:
   
  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is available for the most popular brands

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  ----------------------
   
  Redo the Express Upgrade:
   
  Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.
   
   
   
  ---------------
   
  Go to reactivate the license again.

• Problem with opening Windows store after upgrade to 8.1 Windows

  Original title: cant access window 8 app store

  I had a 8.1 window update to my laptop.but 8 window whenever I try to open appstore, I gives me error that cannot cannot to the authentintion, due to errors, .i tried to open AppStore 3 g, wifi and broadband connection.but I still get the same error.

  Help, please.

  Hello

  Please contact Microsoft Community. I understand that you have a problem with opening Windows store after the upgrade to Windows 8.1. I appreciate your efforts to solve this problem. I've surely you will help solve this problem.

  To better understand the issue, I would need more information on your side.

  1. are you able to open other Apps of metro?
  2. What is the full error message?

  This problem might have occurred because of these reasons:

  1. Corrupt the App Store.
  2. Incorrect settings App.
  3. Corrupt system files.

  Try the steps listed here and see if it helps:

  Method 1:
  I suggest to try the procedure described in the article to reregister the App Store and check if that helps.

  http://blogs.msdn.com/b/notime/archive/2013/10/21/10458031.aspx

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.

  Method 2:
  If the problem persists, I suggest you perform the Scan SFC (System File Checker) and check if it helps. SFC scan will search the system files corrupted on the computer and replace them.

  Use the System File Checker tool to repair missing or corrupted system files
  http://support.Microsoft.com/kb/929833/en-us

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• I have Acrobat 7.0 upgrade 7.1.4 which surprising no longer works after upgrading my mac os

  I have Acrobat 7.0 upgrade surprising 7.1.4 is no longer works after upgrading my operating system mac OS 10.8.5 (mountain lion), which gives an err message that system supports more PPc applications. I guess that Acrobat 7 is a PPc application and I wanted to know if there is no work here to be able to continue to use this product? I don't see this entry.

  Yes. The feature, called Rosetta, let the Intel Macs that use execute code written for PPC. Software not hardware. He was quietly abandoned. Maybe a Lion.