CP LaserJet 1025nw: not connected... showing caution symbol

Similar Questions

• HP printer will not connect with the new modem

  I just installed a new modem which has replaced a router and a modem.   But now my Printer (Deskjet j310a) HP does not work.  The window of the poster printer 'Wireless is not connected' shows you settings button choice: Disable wireless. WPS; Default values.  I don't know what to do and would like to return printer.  And before I changed modem, there was a small symbol of bluetooth on the bottom of the screen and it is gone now.  Any ideas?

  Thank you.  I'll try that and I'll let you know if it works for me.

• My itunes has been updated the software on my iphone 6 and then it crashed and now my iphone is showing the connect to itunes symbol - but now, it is not recognized by itunes?

  My itunes has been updated the software on my iphone 6 and then it crashed and now my iphone is showing the connect to itunes symbol - but now, it is not recognized by itunes?

  These can help:

  http://support.Apple.com/kb/HT1808

  For a Windows PC, try this http://support.apple.com/kb/TS1538

  For a Mac, try this http://support.apple.com/kb/TS1591

• Not connected HP LaserJet Pro 200 M276nw

  Hello! I have the Setup:

  OS: Windows 7,.

  Router: TP-LINK TL-WDR4300

  Printer: HP LaserJet Pro 200 M276nw

  Freeware antivirus: Avira

  Firewall: Windows

  The computer connected to a network via ethernet. I installed the network printer (port TCP/IP wirewless, user good reading/writing, shared printer, 6 PLC) and printed all documets in 2013 of Word, it's ok.  After restart of the operating system, printer of the icon is grey and the State not connected. Please help me. Impression of uninstall and install now, Stoped ptrint service, coil clean, reserved IP address of the printer, it all no results.  Some other customers printed successfully via wireless to the printer.

  Hi @green_wanderer ,

  I see that you are having problems printing via the wired or wireless network after restarting the computer, the printer icon is grayed out and showing not connected, but can always print from other computers. I want to help you solve this problem.

  Is the installation of the printer wirelessly or through an Ethernet connection?

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  I would have to power cycle the router, the computer and the printer to see if it will help.

  Print a configuration page to check the firmware version and see if you have a valid IP address.

  If you have a valid IP address for the printer, then try and access the webserver shipped off to the printer, to see if the printer is still on the network. Type the IP address in the address bar of your web browser. (Internet Explorer)

  The IP address of the port on the computer can be different, if the printer has been assigned a new IP address of the afer by restarting the computer. You will need to create a new port, or run the Add Printer Wizard.

  Other computers that are still able to print could have the port configured to print if IP address changes.

  Print a configuration page to obtain the IPv4 address of the printer and the date of the firmware. Printing a Configuration report.

  The new Version is 20140919.  I've provided the URL if you have an old version of firmware update.

  HP LaserJet Pro 200 color MFP M276nw drivers.

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. Find and fix common printer problems using the tools of diagnosis HP for Windows?

  If the problem persists, install a static IP address to see if it will help.

  Printer does not maintain a Wi - Fi connection. Proceed to Solution 3: printer of the assign a static IP address.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If you need help, let me know.

  Good day!
  Thank you.

• HP Color LaserJet M277n MFP: HP Color LaserJet MFP M277n CONNECTED to THE NETWORK, SHOWS NO INTERNET CONNECTION

  HP Color LaserJet M277n MFP printer, is connected to the network and I am able to print and scan. During the attempt to get the HP Web Enable services in the Web services configuration page, it displays an error: "connection error, check the internet connection".

  After you enter the IP address of the printer in the browser, I am able to detect the printer. To enable printing of HP, but unable to do so finds out the above error. Tried a lot of things including re editing of. When I check the printer, it shows the proxy settings are required / incorrect, where, as confirmed by the supplier that they use the proxy server.

  Help, please.

  Hello @JljoThomas!

  Thanks for posting and welcome to the Forums of HP!

  I understand that you have a problem of activation of the functionality of web services on your MFP HP LaserJet Pro M277n. I'd love to help you with this.

  First of all, you have the printer connected directly to a wall outlet or is a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause. Issues when connected to an uninterruptible power supply/Strip/surge protector power
  In this document you will see, QUESTION: questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector
  ↑ This is not limited to the Laserjet printers.

  If this does not resolve the issue, we are going to let the router and unplug the power cable (NOTE: do not reset the router...), then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  If you are still unable to connect to web services after trying these steps, we can try to set a manual DNS server of your printer to connect to.

  On the front panel of the printer, press the wireless icon. Select it wireless TO get the wireless summary. Do not your IP address.

  1. on your computer, open a Web browser and enter the IP address of the printer in the address bar. This will bring up the embedded Web server (EWS) page.

  2. at the top of the page, select Networking.

  3. in the left side, select Identification network.

  4. in article for DNS, under primary (IPv4) enter 8.8.8.8, under secondary (IPv4) enter 8.8.4.4.

  5. Select Apply at the bottom of the screen.

  6. try to activate the web services again.

  If it is still unable to connect, try to enter 209.244.0.3 for the primary (IPv4) and 209.244.0.4 for secondary (IPv4)

  Hope this helps!

  

• Why my macbook air back show my Facebook messages when I am not connected? What can I do to stop?

  Why my macbook air back show my Facebook messages when I am not connected? What can I do to stop?

  Hello, welcome to the discussion!

  If you are referring to push notifications on your desktop, you most likely have Facebook as an internet account on your MacBook. You can withdraw from your account, or disable notifications for it.

  Open system preferences > Internet accounts

  Select Facebook

  Uncheck the Notifications tab to disable the notifications or click on the "-" button to remove the account

  

• Canon MX 310 connected but do not print and shows not connected

  updated iMac os x el capitan (10.11.4) and now impossible to print with Canon pixma MX 310 - get the message not connected while it appears in my dock and shows point to print failed.  The error log is full of messages and doesn't help me at all.

  How can I get my Canon printer/scanner is working again.

  Unfortunately, Canon did not write all the drivers for v10.11 compatibility El Capitan. See here.

  But what you can do is to try a reset. Make sure that the printer is turned on.

  Open System Preferences > Printers and Scanners and select the print tab.

  Right click or control your printer on the left, then click on: reset the printing system

  When she did try printing.

• HP J3Z8PA #AB5: Hello. HP J3Z8PA #AB5 shows power on password. I can not connect.

  Hello. HP J3Z8PA #AB5 shows power on password. I can not connect.

  @ohzed-osigwe

  The password screen, press enter 3 times and you will receive a 'code to stop' - enter this code on the site below.

  https://BIOS-PW.org/

  Kind regards

  DP - K

• My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

  I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

  I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

  My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

  Hello:

  If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

  If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

  Paul

• HP 8600 Pro Premium: 8600 Pro Premium connected to the cable network shows as not connected on the list of devices

  My printer/Premium Pro 8600 is wire connected to my network and works very well (exception below) but shows as not connected on the list of devices on my desktop computer Win 10.  What gives?  Private network.

  I also can not connect to my laptop which is connected wireless to the network.

  Hello and welcome to the community of HP @Pickles2011,

  I understand that you are having problems with your HP Officejet Pro 8600 Premium connection. I'll be happy to help you.

  Here are some links to documents that provide solutions for troubleshooting connection problems. Try the steps and let me know the results.

  HP printers - Printer not found during setup of the network (Windows) driver

  Wireless printing Center - Troubleshooting

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• What should I do when the display shows "at the service of the user could not connect. Unable to load the user profile... ?

  I connect to my profile and I am not able to log in. The display shows "at the service of the user could not connect. User profile cannot be loaded... » » ?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  -------------------------------------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  -------------------------------------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  -------------------------------------------------------------------------------------------------------------------------------------

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows XP: Network in the system tray icon shows not connected, but I can access the internet

  When I start my network icon in the tray system shows I'm not connected, or it shows that its acquiring network address and it stays like that, but when I opened my browser, I can browse the web, which means that I have a connection.
  I guess its some error or something, can someone please tell me how to solve this problem?

  IM using Windows XP

  Hello

  • How long have you been faced with this problem?
  • What were the changes made before the problem occurred?

  You can view these methods:

  Method 1:

  I suggest you to refer to the early stages of this link:

  http://support.Microsoft.com/kb/956196#gM1

  Method 2:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Apparently, I got an automatic update of Windows XP. All of a sudden my computer does not connect to my HP Laserjet 1000 printer.

  All of a sudden my computer does not connect to my HP Laserjet 1000 printer. These work very well together for several years.

  Now all of a sudden I get a message that the computer cable is not connected.  I tried to charge the printer program.

  I unplugged and reconnect the cable to the computer, etc.. The system does not work.

  I learn by two other people, who have automatic updates of Windows, they had the same problem. We have a Kodak

  printer and the other has a Lexmark printer. This makes me think that the problem is in the updates of Windows.

  So, what should I do to fix this? I'm NOT a computer person and I'm confused.

  James

  Hello

  · The updates have been installed on the computer?

  You can follow the procedure from the following link: printers HP LaserJet - USB Devices closing work unexpectedly in Windows XP: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=45674&prodTypeId=18972&prodSeriesId=45674&objectID=bpl11421

  You can also access: family of products HP LaserJet 1000 - Error Messages on the computer (PC): http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=240170&prodTypeId=18972&objectID=bpl11045

• Network and sharing Center shows not connected, but the computer is connected to the wireless network

  When I open the network and sharing Center, or hold my mouse pointer on the icon of internet connection in the bottom right of the taskbar, it shows that I'm not connected to a network. However, I know that I'm connected to the internet. My internet and e-mail work correctly. Also, when I click on the 'Connect to a network' option, find the list of available wireless networks, and it shows that I'm connected to my home network. How can I make Windows everywhere where I am connected to the internet, instead of recognizing only on the list of the networks without wire-available?

  Had exactly the same problem on Windows 7 (win7). Connected to the Internet but the status showing no connection and a red cross on the network icon. Problem has also caused problems to connect to Lync and Office365 along with VPN, which apparently uses the status to check whether the connection is available.

  Found the solution here: http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/df17c593-e78f-4878-97b0-7569307934c5

  Apparently, certain permissions gets hurt in the database record and must be fixed using RegEdit. The solution is a step by step and likely to be resolved simply by removing a cache of file using RegEdit and potentially affecting certain permissions.

  It will be useful.

• The network icon shows not connected, but in reality I'm connected and can browse internet.

  Network icon does not display connected

  The network icon shows not connected, but in reality I'm connected and can browse internet.

  Could grateful if someone let me know what could be the reason.

  Thanks in advance

  Hello world

  I had the same problem and I solved it by unplugging my pc to the modem, wait about 30 seconds and reconnected. This means that if you do the same thing with your network adapter problem could be solved. Try this option, you will not lose anything