CP1025nw: CP1025nw - light wireless on

Similar Questions

• Color LaserJet CP1025nw - light of Attention on

  Hello! I hope someone can help with a preview on a printer problem, I have.

  Here goes...

  It of almost 1 year out of the box and has stopped working. When I turn it on, the amber attention LED flashes and stays on. The Green led also lights up. When I try to print a Setup page a window pops up saying: "Unable to establish two-way communication with the device." It is plugged in and that the power cords and usb are intact.

  There is no jam that I can see. I can't turn the cartridges to see if there is anything wrong or to replace them, even if that was the case.

  I feel like it happened after I installed the update of the firmware.

  I'm on mac os 10.5.8

  What I tried:

  • Shooting printer / disconnecting operations 'x' down for 30 seconds before turning back on

  • Uninstall and then reinstall the driver from the floppy disk supplied in the package

  • Uninstall and then reinstall the latest drivers downloaded from HP

  • Reset the system preferences print system

  • It scream

  Any help would be greatly appreciated. Thank you!

  I'm sorry to hear that.  I have this lift to the right people.  You should hear from them before, for a long time.

• HP 14-r206nv: light wireless led doesn't work do not

  I have a very minor issue that don't mind operating of the laptop, but I'm curious to know why it does not work, because I know that before reinstalling windows it worked normally.

  Well well, to the point now. After a hard drive failure and replacement, Windows 8.1 are installed again and each driver has been installed and works well. The only thing that doesn't work is the led light button wireless (F12). The button is working correctly, activation and deactivation of the Wi - fi, but not the led. It lights, neither white nor red, it is always disabled.

  The model of the wireless card is Realtek RTL8723BE.

  I installed the drivers from the HP site.

  Version of the driver for the wireless card is 2013.8.915.2014

  The version of the wireless button driver is 1.1.7.1

  I tried the latest drivers for the card (an optional windows updates finds) implemented to date for this and the wireless button (if I try update driver in Device Manager, it installs a new) but nothing has changed for good so I decided to go back to what the official site suggests and post here.

  Hi @v1184,

  Thank you for your inquiry.

  I understand that you had a hard drive failure and he had to be replaced, you did. You reinstalled Windows 8.1 and all drivers are up to date.  The only problem you are having is that the wireless button light does not illuminate, but it does not work.

  You tried to update the wireless driver button, but has not changed, so you returned back to the recommended HP driver.  As the wireless button does not work it is not the driver, however, it could be that the light burned. The other possibility would be that when you replaced the hard drive, the connection has been dislodged or disconnected and must be reconnected.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on ' Thumbs Up ' below is a great way to say thank you!

• I lost connection on the computer like many light wireless wireless router.

  I've got three Kindle and a laptop computer, more my PC connected

  Original title: I lost my WiFi connection at home in light of the route for the wireless is not lit.

  Hi geraldthorpe,

  Thanks for posting your query in the Microsoft Community. It seems that you have no internet connection on the computer. We can get this fixed number by systematically. It can be frustrating for you. But, don't worry, we're here to help.

  We start with a few questions-

  (1) what is the version of Windows installed on the computer?

  (2) you are able to connect to Internet via LAN cable?

  (3) are other computers at home able to access Internet?

  (4) do you get any error code or error message?

  (5) have you made changes on the computer?

  I would like more information about the issue.

  Method 1-

  As a general rule, if the wireless light is not on the router means that the ability of routers to transmit wireless is lost.

  The router has generally, 4 types of fires.

  Power - number 1

  Test - number 2

  Wireless - number 3

  Internet - number 4

  Numbered LAN are turned on only if a network cable is connected.

  If the computers are connected wirelessly, all the lights except the indicator light should light up.

  I wish you perform a reset and a cycle of power to the router.

  Reset the router-

  You must locate a set PIN size behind the router and press the reset button with a pointed object for 10 seconds. Now, release the button and wait for the lights to come back.

  Note If the wireless light is back on.

  Power cycle-

  I wish that you unplug the router from the power outlet main and plug it back again.

  Check if the problem persists.

  Method 2-

  I would have you look at the article-

  Network convenience stores

  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Method 3-

  I would have you look at the article-

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Wireless and wired network problems

  http://Windows.Microsoft.com/is-is/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  We know if you need help. We will be happy to help you.

  Thank you.

• My screen flashes and flashing light wireless is gone (laptop)

  Product name: HP Pavilion dv5-1040ep Notebook PC (FM577EA)

  Operating system installed: Windows Vista Edition Home Premium

  Error message: None

  All changes to your system until the problem was happening: None

   

  Description of the problem:

  
  I could not find in HP Support Assistant help some. My screen flashes while I open and move it. Sometimes, it must be almost closed to be visible. It can't Hibernate or restarts, flashing just with movement.

  Partners or not, the blue light that indicates wireless, missing/is gone, but I have wireless, just the light disappeared.

  There is no error message, just that two things that appeared in the material.

  Someone happened to that? How do solve you? What are the parts must be corrected or modified?

  Happy to help you.

  But sad for the question.

  Yes, that means lcd cable needs to be replaced. It s is not easy to do, so I advise you don t feel comfortable to open the unit to go to a repair center.

  This components are very sensitive and can be damaged easily.

  You can use this part number for the lcd to buy a new one, a 484367-001 is not much more expensive and is not an expensive repair.

  On the need for basic wlan led to replace the switch cover and the part number of this one is very cheap in 488316-001 it s too.

  You can easily find these parts on the web.

  Doubts, questions or how to replace these parts just tell if I can advise and help you.

  Best regards

• HP 1217 printer: hp 1217 not light wireless

  Help.  I got a new wireless router.  Now can't print wirelessely to my HP 1217.

  The blue light blinks or flashes at all.

  Please help me.

  What must I do to return to printing?

  Yes, the wireless light blinking means that you are not connected to your routers SSID.

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• Flashing light wireless

  Just bought a HP8620 and it works fine, including wireless printing, but the wireless light is still flashing. How to stop the flashing light?

  Hello!

  I'm very happy to hear the good news! If you have a moment, please click the button of "Acceptable Solution" so that others can find this thread here too, because it can help them!

  Thanks for posting in the community, have a wonderful day

• Interruption due to the light wireless wireless connection does not illuminate

  I have a 4330 s HP's Probook

  I can't connect wireless in reason, wireless led light does not activate, I don't know if I need a driver, but I guess that all drivers are real.

  hope someone can support me in this case.

  Thanks in advance for your support

  Original title: wireless connection

  Hello Ruka,

  Thanks for choosing the Microsoft forums.

  I understand that you can not connect to the internet using the Wi - Fi connection on the computer.

  I would like to know some information about the problem so that we can help you further.

  You did it all change hardware or software before this problem?

  Try the following and see if they work for you.

  Make sure the wireless, as the function key switch for the wireless is turned on. Please refer to the user manual that came with the computer.

  Method 1.

  Try to use the network for Windows 7 troubleshooting:

  http://Windows.Microsoft.com/en-AU/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2.

  Please try to look in the Device Manager for any exclamation point in Device Manager.

  Check the network card

  1. click the Start button picture of the Start button, type "device manager" in the search box and then in the list of results, click on Device Manager. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2 expand adapter option and then check for any point of exclamation.

  Is there an exclamation point on found network adapter, then we troubleshoot the missing or corrupt wireless drivers. And we must also update the latest driver wireless from the manufacturer's Web site.

  To install the latest drivers for network adapter from the computer manufacturer Web site:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_bd9b6997fbc7fc515f4cf4626f5c8d01=wsrp-navigationalState%3DswEnvOID%253D4059%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.tpst=bd9b6997fbc7fc515f4cf4626f5c8d01&sp4ts.oid=5045451&ac.admitted=1393314132234.876444892.492883150#Driver

  Method 3

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 4.

  Why can't I find a wireless network?

  http://Windows.Microsoft.com/en-us/Windows/cant-find-wireless-network#1TC=Windows-7

  Additional information:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-in/Windows/cant-connect-Internet#1TC=Windows-7

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/wireless-networking-FAQ#1TC=Windows-7

  Wireless light does not illuminate

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/wireless-light-does-not-turn-on/TD-p/894811

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help you.

  Thank you.

• Conversion light wireless AIR SAP 1602

  Hi, we have many points of access AIR-SAP1602I-E-K9 who are currently working in stand-alone mode, we have now a 2504 Wireless LAN controller so is possible to convert the AIR-SAP1602I-E-K9 in light mode?

  Yes you can. Make sure you have at least 7.4.100.0 version on WLC in support of the AP of 1602.

  1. for the conversion of LWAP, use the recovery image. First download the rcvk9w8 software from this link.

  2. then, you copy the IOS to your TFTP server to your access point.

  3. the order, must be registered to the AP, is: archive download-sw/over tftp: / / /.

  Check these procedure:

  http://www.Cisco.com/c/en/us/TD/docs/wireless/controller/7-4/configurati...

  http://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/

  https://www.YouTube.com/watch?v=Fiv76UpStKI

  Concerning

  Remember messages useful rates

• Light wireless Cisco to Converion autonomous on AP Cisco2600/2700

  Dear team,

  I have these two Access Points "AIR-CAP2702I-C-K9" and "AIR-CAP2602I-C-k9" and I need to convert them into Standalone/autonome Mode. Please let me know if it supports the conversion of light weight in standalone Mode?

  Is there any document detailing the same for Cisco 2602I/2702I Access Point?

  Kind regards
  Farhan.

  Please let me know if it supports the conversion of light weight in standalone Mode?

  Yes, stand-alone mode is supported.

  Is there any document detailing the same for Cisco 2602I/2702I Access Point?

  By using a TFTP server to revert to a previous version

• HP CP1025nw: Double-sided printing at Yosemite OSX

  I have a CP1025nw running wireless on our network. This printer supports printing double-sided pages recharge.

  Were two-sided printing with an air of Macbook OSX Lion V 10.7.5 running successfully. Recently bought a new Macbook pro of the retina, running OSX Yosemite V 10.10.4. He immediately picked up the printer and installed a driver which works very well but no double not back print. Boxes diaglog feel like just Word, PDF, Outlook, Safari or Firefox printing, not stay have the option of double face, or if it is visible, are greyed out and cannot be selected.

  Is this a problem with the version of the driver that has been chosen automatically by the Macbook/OSX?

  Ideas for a solution?

  I can always print duplex from my old computer.

  Hi Feeben,

  When checked the specification for this printer looks like it has manual Duplex via the software where you select, and then you manually turn the paper to print the second side. This is the option that you can reference to the which is grayed out.

  How is the printer connected... USB/network.

  Given the operating system automatically selected the driver, it could be the default AirPrint driver.

  Click the link and download the driver for printer HP V3.1.

  Now go to System Preferences > printers and Scanners > right click on printer and click Reset the Printing System(Note: This will delete all the printers under the printers and scanners, Do not perform at this point if multiple printers installed)

  If Reset Printing system is ignored then forts of the printer and click on the symbol (-) to delete the printer.

  Adding the printer:

  Click the plus (+) symbol, select Add printers and Scanners

  On the Windows Add strong printer from the printer

  Down in the section USE click on move to the bottom and select the printer Name (CP1025).

  Click Add

  Now, check if the manual duplex option is enabled.

  Thank you

• HP Officejet J6480: Start printer [J6480) with light turns off wireless]

  I just changed my network configuration to change my printer to connect wireless to my router to be connected by an ethernet cable. All the settings have been changed for a wired connection, but when I start the printer, the wireless always light up initially. I can manually turn the light off, however I was wondering if there was a setting I can change to get light wireless off at the start of the printer?

  So happy that you read the manual to find the answer. Please mark my post accepted solution for others, among them the answer.

• Wireless light stays Amber ' f12' ' PC portable hp ANVY m4' D1D581UA #ABA' 8 64-bit Windows

  I have hp ANVY m4 notebook pc window 8 64-BIT ' present light wireless AMBER establish f12 visits of wihte' but still can connect to the internet... !

  This problem makes me uncomfartable because I own my laptop afew days ago ' so I need help how to resolve this problem.

  REGD.

  Hello Masa.  I understand that you encounter some difficulties to turn on your wireless network.

  The wireless button works slightly differently in Windows 8 in previous versions of Windows.  It activates the 'airplane Mode' instead of turn turn off/on the wi - fi radio only.  Try the following to make it work as you would expect.

  1. Since the display type of Metro 'wireless '.
  2. You should see 'settings' on the right.  Select this option and it will fill several elements associated with wireless on the left side of the screen.
  3. Select "wireless" in this section.
  4. You should see a few options.  One being "Airplane Mode" and the other two being a power switch for bluetooth or wireless.
  5. Ensure that these two are turned on when airplane mode is turned off.
  6. Save the changes and reboot.

• HP Deskjet Ink Advantage 3545: Wireless indicator light flashing even though I can connect

  I can connect my laptop to the direct wifi printer. Can also print via wifi direct. But the wireless next to the wifi button light keeps blinking during the whole process of connecting laptop to print. Is correct because I was expecting light remains constant?

  Hello

  Wireless light should blink in this scenario, which is by design.

  Wireless light refers to a connection to the printer to an access point or router.

  Direct wireless connection should not affect the light wireless, a connection to a router...

• Wireless light does not illuminate.

  I have a Compaq vista Professional running, I type light wireless on the Panel (above the keyboard, under the screen) with my finger. It does not start. Can someone tell me what is happening. Thank you
   
  tntbob

  Hello

  Try a Hard Reset as follows.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the power button for a minute.  Reinsert the battery, connect the power adapter and start Notepad - this has any effect?

  Kind regards

  DP - K