Printer J4680 and G4050: conflict between g4050 and J4680

Similar Questions

• DeskJet 3520: Conflict between the size of the paper, recto verso and settings without borders

  With the borderless printing option on in the print preferences, my printer prints pages with margins that are too wide. So I tried to turn this setting off. However, my computer said that there is a conflict between my "Flip on Long Edge', 'Letter' and"Borderless printing"paper size options. Is it possible to have it all at the same time?

  Hello

  Automatic duplex printing requires your printer increase its margins for the duplexer inside the printer to retrieve the page and flip it around.  It is a function of the printer and can not be changed therefore you cannot print without margins in auto duplex.

  Kind regards.

• Conflict between the settings of the computer and Windows Live Mail

  I have a conflict between my computer settings, Windows Live Mail and Windows Live Hotmail/Calendar.  When the computers ' regional and Language Options | Date - short Date Format"settings are set to"dd-MMM-yy"is in conflict with the Windows Live Mail and Windows Live Hotmail/Calendar 'date of birth and birthday' date formats.  Whenever a date is placed in the Windows Live Mail "birth date and birthday" field the date in the field becomes "mm/dd/yy" which generates a conflict in date format.  Enter "mm/dd/yyyy" in the date field of "birth date and birthday" in Windows Live Mail when your computer settings are set to "dd-MMM-yy" and Windows Live Mail passes the numbers 'mm and JJ '.  Is there a solution?  I'd like to see dd-MMM-yy on my computer.
   
  Also why Windows Live Mail and Windows Live Hotmail contact list different?  In Windows Live Mail, you can enter a "anniversary date" but not in Windows Live Hotmail contacts list!

  WinXP all updates, WLM 2009 v14

  Thank you

  WWHOAWM (Dan)

  Live and Hotmail queries to the appropriate here forum:

  Windows Live Solution Center
  http://windowslivehelp.com/

• my security system says I have to fitrewalls of operation and conflict between them how can I close an and will clearly be my treatment slow exremely (of many gurus aslledged on my computetr)

  my computer is tellking me I have two firewalls running adding that they can / will conflict with each other.  This will slow down the speed of my computer and if so, how do I close one as you can tell I'm learning but too useful? gurus with own ideas thanks bob

  Hello

  Having a firewall protects your computer can cause problems system, slow, etc., such that there is a conflict between them.

  This normally happens if you have an Internet Security Suite, which includes its own firewall, protecting your computer and have Windows Firewall enabled, too.

  What Antivirus program you have installed?

  And what program give you this advice?

  And you are using a 3rd party Firerwall?

  Zone Alarm is an example of a 3rd party firewall.

  You can disable the firewall of a Suite Internet security within this program.

  Here's how to disable the Windows Firewall:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  But before you let do us know what Antivirus you are using to ensure that you receive a message authentic on this firewall problem.

  And you must also have an antivirus installed for the same reasons.

  See you soon.

• Conflicts between the 'Éléments' and 'CC '.

  When installing CC, I came across serious problems. The German support he blames to my network, but this was not true. My admin has discovered that there is a conflict between 'Photoshop Elements' and CC. As a precaution, we also uninstalled 'First 11 Elements'. After the installation of CC has worked well.

  There is of course no need to have 'Éléments' as well as 'CC Photoshop"on a single computer, but for my a few videos YouPorn 'Premiere Elements' was quite enough. Anyone know if it is possible to reinstall 'First Elements 11' on the same computer with 'Photoshop CC' and "Lightroom CC"?

  Thank you and best regards.

  Normally, there is no conflict between different adobe products and versions (except acrobat).

• Why print preview and print lose lines of text from the image to the screen in the browser

  When I bring up (for example) a magazine article in my browser and you want to print it for future reference, print preview and printed image 'lost' lines of text between pages compared to the original image in the browser. For example: visit this link: http://www.pcauthority.com.au/Feature/408318, how-to-make-windows-admin-easy-with-powershell.aspx?eid=2 & edate = 20150828 & utm_source = 20150828 & utm_medium = newsletter & utm_campaign = weekly_newsletter & nl = weekly and select 'Print' from the menu. Print preview that appears - poster in portrait mode or landscape - loses one or two lines of text for the print version wraps useless. Where the missing text? pagination is not identical, and Firefox seems unable to handle it.

  I use a HP desktop with Intel i7 CPU 8 GB of RAM and Win 7 Pro SP1. Firefox is V40.0.3

  I do not see "imposed by the system of page breaks" encoded in this Web page. It would be difficult for an author of a Web page with an international audience.

  You use A4 paper, but what about those of us using letter-size paper? Page breaks may screw up page print to LETTER, from a Web site to THE like this.
  And what about the 'zoom' different levels? For printing which is called scale preview of Firefox and Page Setup print.
  I put systematically "modest" when printing to save paper, to keep the last page to only a few lines, or when the font size in print preview is too great (IMO) for printing on paper. And the size of police appeared to have worsened as monitor resolutions have gotten larger over the years.

  The only time wherever I lost lines of text between printed pages was when I was "pushing the limits" with the paper up and down / page margins. IOW, too small header / footer trying to get on each page as possible. By default, Firefox a. 5 "margins (left and right) with. 5 "header / footer (top and bottom margins) = letter-size paper. With 'A' type of paper using metric would be tantamount to the margins of 12.7 mm on all four sides. The /metric of inches "toggle" is with the size of the paper, the user has selected.

  Check the Page > margins & header / footer to see if you have the parameters of ~ 12mm or it they are smaller.

• and installed this (I think). Printer seemed to work. Now say "impossible filter. sometimes footprints of Safari, but no word. Sometimes, it prints a page when I turn printer on and outside. It's crazy to do. Thank you.

  I have a MacBook Air. I use OS x El Capitan V10.11.12. 3 days ago, I installed a printer Epson L355. Everything seemed fine, when I first printed a few pages. I installed the driver delivered with printer and followed the Mac set up. The process has not completely finished the whole upward. I then found a Mac driver Mac page and installed (I think - how will I know?) and it seemed ok. When I used it the next day I kept getting message "filter failed" when you try to print from wifi. There is a strong wifi signal and scanning is ok. I can sometimes print a page of safari, but not from Word. I tried to delete and add printer's done everything to nothing. get him looking for a printer then message "filter has failed", with the printer in the "inactive"

  Can someone help me please? I'm getting worried and frustrated in equal measure. I'm not a techie and really evil.

  The message failed filter keeps the driver having problems of compatibility with the operating system and not the network connection to the printer. You mentioned with the driver supplied with your printer. This is linked from a previous version of Mac OS X, because sellers do not tend to get the latest drivers on the CD supplied with the printer. And then you install another driver, you can have caused even more conflict. So I would recommend that you delete the printer Printers & Scanners and then using the Finder, select go > go to folder, and then type/Library/Printers/Epson and press the Go button. This will take you to the Epson folder that has all the files in the printer driver. Select all the files and then trash them. Then, restart your Mac and when you are logged in, go to the Epson website and find the L355 printer driver that supports OS X 10.11. Download and install this driver, and then add the printer via Printers & Scanners again. Then see if you can print.

• Windows cannot install your printer driver and / or utility

  I have an Epson SX200 printer all-in-one and I am trying to install the device on a Vista 32 Dell laptop.  I don't have the disk for the printer, so I try to download the drivers for the printer on the epson site.

  I downloaded the drivers scanner and software sucsessfully, trying to download the point of finishing extracing printer driver files, I get an error message saying "Windows cannot install your printer driver and / or public services."

  I tried the support of epson who tried intsalling the pilot from other web sources, bottom of dissabling starting programs, etc.

  I searched the web but cannot find any patches or explanation to the problem...

  Any ideas?

  Hi J Bielawski,

  Thank you for using the Microsoft Windows Vista Forums.

  Method 1:

  Let us try to disable the Antivirus security software and check the number.

  Re-enable the security software after checking the issue.

  You can also try disabling the firewall and check the issue.

  Re-enable the firewall after checking the issue.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Check whether the problem is resolved.

  Method 2:

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• WPSM54G cannot find print server and not able to print the test page

  After several days of trial and error I am so far I'm willing to give up and put this peace of equipment for sale. It is my last attempt to find a solution.

  I have a Canon MP510 printer connected to the print server and I managed to configure the print server so that it establishes a wireless connection to the router. I can see the ip address assigned to my router print server and I can log on to the configuration of the print server page.

  When I want to set up your computer (software print copy of the Canon MP510 print server) I can not complete the wizard. Step 1 is successful. It shows the print server and the MP510 related to port 1, but in step 2, I get a message that the print server can not be found.

  I looked on the forums how to solve. I already tried a fixed ip address to configure the printer manually but not any which solution worked.

  Your print server must be set to a fixed IP address, try this IP address: 192.168.1.78... Disconnect ethernet cable between your router and the PS... Both devices power for one minute cycle... Follow the link here after changing the IP address on the PS...

• HP Business Inkjet 1100dtn first would not print at all, now prints black and magenta and cyan

  Hello world.

  First of all I must say I spent most of the night reading the posts here, especially this one:

  http://h30434.www3.HP.com/T5/other-printing-questions/HP-Photosmart-C7280-black-ink-won-t-print/TD-p...

  I find that a lot of people are frustrated, but I also find that a lot of people go a long way to help, which is nice. :-)

  I bought a HP Business Inkjet 1100 DTN in 2004 or more and was extremely (!) satisfied with it. This is the best printer I've ever owned when it comes to value for money and durability. However, he was put away for a few years and a friend played with it to make it work. I think also, it has removed the print head and cartridges for awhile. This could possibly make the printheads, ink near the connectors and not dry out the cartridges?

  Anyway, I got home yesterday, and the first think I did was soak the print head in warm water. I don't even bother try everything first. Also, I cleaned up the two electrical contacts for the print heads inside the printer and the print heads themselves. Finally, I used a dozen q-tips to clean ink residues near the two connectors for the cartridges and print heads.

  After all this, I went for a clean full from Windows. The first testpage (power while pressing X on the printer dock) came out as expected... terrible. No black, not yellow, almost no cyan and some magenta.

  I repeated soaking in hot water, only hotter this time (boucherit filled with water in the dish, then dip the lowest 3-4mm of each print head). Each of them sunk ink when I stirred the water so I was optimistic. Yet once, I ran a full cleaning of Windows and print a testpage (hold power while pressing X on the printer)

  Much better this time.

  Now, I had about 50% yellow, which should have been there, 70% cyan, magenta to 90% and the text on the upper part was mostly black. Magenta has helped fill in some places where black does not.

  However, right after cleaning with water or alcohol, it prints fine for maybe 1 testpage, then it is worse. Also I noticed that the black ink is very sticky, so I think he skipped over the years. I know that I can just buy a new set of ink, to make the power contained in the cartridges heads line and heads are full of old and thick ink. Even with heads printing, no need to buy new ones since the supply line is full of old and thick ink.

  I also noticed that the supply line for the cartridges printheads have air bubbles in them. I see bubbles in the yellow and magenta lines, but the cyan and black are too dark to see. I guess that's a problem? I read that energetic cleaning combined with print between the two may over time to solve this problem, but I have to say that I did the cleanings at least 25 tonight and the bubbles are more or less on the same place. (I also notice some bubbles and marked their position). They move when the pump in the cartridges are being exploited, but coming back to the same place after. Almost as if the printheads does not accept ink, are blocked or have internal pressure which must be ventilated. (?)

  So I guess I have to get a kanyle (not sure of the English word), remove the ink cartridge to suck little ink, and then remove the print head and inject the ink, I took the cartridge it is until the power line is free of bubbles also good and old ink. Then replace the cartridge and the head.

  Am I mistaken or I think much too advanced?

  Here are some of the testprints in the correct order. There are many others, but I downloaded the most important.

  

  

  

  

  Note that yellow was there at the beginning, so also was the cyan. Now they are both almost gone again. I suspect than that to have something to do with air bubbles? I'm not sure. Magenta seems to be the only color as well. : PEI

  I also tried the tip to the subject of bumping the cartridge (I did the same thing with the print heads) with no noticeable improvement. Also, I cleaned the rubber gasket on the black cartridge with a paperclip. Of course, he came out with ink, but it was sticky.

  Please answer because I would really get this printer up and running again. :-)

  Ben of the Norway.

  Hi again. Sorry for double posting, but I thought it deserved a post of its own.

  After having tried everything last night (I worked at least 8 to 10 hours on the * beep * printer) I got so sick so I just took all the print heads and tempered 5mm lower them (side of the printhead) in hot water and let it just sit there for 2-3 hours. I had forgot about them when I went to bed. I cut them a bit and inserted into the printer, rand a clean and printed this:

  

  The yellow one is still a little with rays, I guess that some nozzles are always blocked, but at least now I know the formidable powers of the hot water. :-)

  Ben of the Norway.

• iPhone on air print work and no ipad

  iPhone on air print work and not the ipad?  any suggestion?

  You mentioned a device works and the other does not. The first thing you want to do is to determine what is different between the two devices. Both are on the same network with success? The other device has already worked, or have been updated recently performed at what caused this?

  To really help I would need details as what model of printer you have, what model of router you have, what version of iOS is installed on your device and what version of each device you have (iphone 4 or 5, ipad, ipad 2, etc.).

• Unable to print black and white with an empty cartridge

  My printer will not print not black-and-white, except when a color cartridge is replaced empty.

  How can I print black with an empty color in place cartridge?

  Some IIC (individual ink cartridge) printers have print heads that require ink available for periodic maintenance tasks. This avoids problems with hooves in the print head and the bad print quality. The following printers are unable to print when a cartridge is empty, even if the other cartridges.

  

  If one or more color ink cartridges are low but not empty and you want to minimize the use of color ink, you can change the settings in the HP software to print in black ink only (grey levels). Even if you change the print settings to print in black ink only, the other ink cartridges still have ink in them so that the printer to print.

  If you choose to print in black ink only, the printer always uses small amounts of ink from all cartridges for occasional maintenance tasks. HP recommends to replace the low ink cartridges in order to avoid any interruption in printing.

  

  For more details, see the link below

  http://support.HP.com/us-en/document/c04331666

• SOLUTION for your HP printer disconnect and/or constantly disconnecting from the network

  If you are having a problem printing, scanning or fax with any HP printer because of this be disconnected and constantly disconnecting from the network, here again is the fix!

  I thought that this all after several failed attempts with HP Support, my Internet access provider and various troubleshooting tasks including reinstall the HP software and more and more.  Well, through self teaching on internet and exhausting search for 6 months, I FINALLY thought to it.  OMG!  I'm a paramedic (not IT) and a little computer but far not an expert.  I have all of you here!  Nobody seems to have the answer, but I'm sure that I'm doing it to 97%.  Whatever it is, if it please answer and let me know that it worked for you!  :-)

  It doesn't matter if your printer is installed cable or wireless.  You don't reinstall your software, no recycling power of your printers or your router/Modem.  Your printer is unstable on the network and continues to log out or disconnect from the network it is NOT because the software is glitched, it isn't a firewall problem by saying, is not a router problem, is not a problem with your power cord, because most networks use a 'Beach' and IP addresses for security reasons This kind of "cycles" the IP addresses of the devices to reduce the risk of an attack.  A printer is not a threat, but the 'network' don't own human intelligence, so he does not know this.  Here are my step by step instructions on how to basically your printer address IP (static IP) instead of change back through a cycle so drop your printer on the network or disconnected.

  Funny, if you're someone who has had the elements in your print queue, they will not print, and you turn your printer off and on again and suddenly your print... well documents, join my club.  The reason it works is that when you turn on the printer, it starts with the same IP address before cycle.  If you are someone who is sitting there for a while and all of a sudden your printed documents without changing you something... it is because through the cycle of change of IP address, it hits your printers IP address and the network would allow him to print.  Not very funny, I know.  It took me forever to figure out why my printer would print sometimes, but not always.  Since I thought at this point, I can SCAN, PRINT, and use all the features of my HP software installed like HP, Photosmart Essentials Solution Center.

  On your printer, go to menu/Setup/network and press OK.  In the network menu, print a "network configuration page" so you can see the IP address and other settings of your printer.

  Now, back to the main menu on the screen of your printers.  Or you can go to your web browser and type the IP address using decimal numbers too and this will take you to the web page of your printers.  Choose: setup\network, then press OK.  Look for the IP settings and press OK. Choose "manual" instead of "automatic". Manually enter the IP address it as well as the default gateway that you can see the Network Setup page you printed earlier.  Note: If you manually set the IP Address of the printer, make sure that it is outside the range of your router's DHCP. Otherwise you might encounter a problem with IP addresses on your network duplicate. (If you don't know how to do this, write back and I'll explain).  Don't forget to click "save changes".  Now, restart your computer, and print just what you want.  :-)

  A trick I often use with DHCP network printers:
  In printers and faxes, right-click on the printer and select "Properties".  Click Add a new port.  Choose standard TCP/IP port configured for the host name of the printer. Read the host name of the network printer configuration sheet.
  
  Using my method means that you always connect to the printer even if its IP address changes (which can happen with the dynamic configuration). This does not jeopardize the security of your network.  It shows just your printer to stay put and stop traveling the highway of IP address.  :-)

  The DHCP range is the range of IP addresses that the router distributes automatically as devices to join the network.  The DHCP range is determined by the router and each brand has a range that is set at the factory (which can be changed by you).

  Default value for the DHCP of your D-link is 192.168.0.100 to 192.168.0.199.  Thus, outside the DHCP range est.2 a.99.200 a.254.

  Is a handy cheat sheet attached.

  You can change this interval by entering the router settings page - type the router's IP address in a browser, enter the login information and access the DHCP parameter area (varies depending on router, hunting around).

• I recently received a print order and wish to order others.  How?

  I recently received a print order and I'm very happy with it.  Now, I would like to order more.  I have to go through the same procedure (ie. by selecting format, select photos, creates the text, etc.) or is there a simpler and easier way to proceed?

  A print of that command: prints, a book, a calendar or card?

  In all cases you have to repeat the process allowing you to order the first time.  However, for books, calendars and cards if you still project it is easy to move.

  However, for prints, you need to select images, frame according to the needs and order sizes and numbers of each of you did the first time.

  

• C7280 printer prints no and says memory card insert!

  Printer does not print C7280 and said (Insert memory card) why I want to do I just want that it to print?

  Hi locobritannia,

  I understand that you are unable to print from your computer, I'll be happy to help you resolve the issue. Until we start, I need to know whether your computer is Windows or Mac based.

  Looking forward to your reply!

  Thank you