CPU cooler for the T61P

Similar Questions

• AG3-605: CPU cooler for the cpu: which?

  As I am closed for rebuild my AG3-605 with a new motherboard (the same as the damaged), I want to try a new CPU cooler.

  It's not easy to find one. Noctua NH - L12 seems to be one that can fill my reconstruction. But I'm not so geeky that you might believe and confirmation of my choice would be great. It is up to you! And thank you!

  Hi jaclou,

  I am pleased to learn that you have purchased a new MB. Delay was pretty quick.

  I tried to replace my old office by another brand fans.

  Unfortunately, the management of speeds was wrong question so heat. The thermal module or the smart fan is set for fans of the original (speed / voltage / PWM %).

  We have only two options: full or restricted speed.

  For example radiator fan speed: 4200 ~ 4500 rpm and fan speed: 2200 ~ 2500 RPM.

  I tried to manage the different speeds with Speedfan, but after a few days I noticed that the bios was "troubled."

  Well, I ordered original Sunon fans.

  Question:

  You already have a case fan?

• 850 - 009na M1Z34EA #ABU: CPU fan for the 850-009na feel like Phoenix does not turn down after the power - on self test unless the BIOS is entered

  Hello

  I have posted responses to other posts on this topic, but thought I'd start a new thread to gather my conclusions. I'm sorry for a trial

  This PC is virtually brand new (only a few weeks now) and otherwise perform exceptionally.

  Basically, if the machine is disconnected from the power grid (i.e. the power is off at the plug or the power cord removed), when the machine is supplied then the CPU fan turns over 2000 rpm and stays there. All the other PC that I do this too, but the fan will slow down after turning upward. I know that this is done as part of the POST to check that the fan is running.

  If I go into any installation of seed, start-up or BIOS for example (i.e. by pressing ESC or F10 etc.), the fan will slow down immediately up to 700 rpm. It will stay like that until the next time the machine is started against the cold. If I shut down the PC - watch or stop - but do not cut the power supply, then the next time the machine is started, the fan is still about 700 rpm. It is not to turn up to 2 k + RPM when lit.

  As soon as I unplug, then the next time the PC boots, it will turn to the top and I have to repeat steps - off, boot, enter the BIOS, exit and continue. It is something to do with the cold start.

  Note that I don't have to do anything in the start menu - I for example go to the BIOS settings, exit without saving the changes, and the fan will still slow. It's going in the boot sector that slows down the fan.

  When the PC started out-of-the-box, I opted for the upgrade to Windows 10 during installation. I have read in various places that people had experienced after the upgrade, so I reset the machine to factory settings (Win 8.1) and have not upgraded, but the problem persisted. However convinces me that Windows 10 has been removed completely, as when I went to restore the backup image (i.e. dating back to what I had before the factory reset) there are references to 10 Windows (for example, it says 'Continue to Windows 10' as well as various food options). I do not understand UEFI so I don't know if that was involved.

  I tried to change the power plan options "Processor power management-> cooling system strategy" on the liabilities side, but no joy there.

  I think that the fan and sensors work, based on the findings below. These readings of temp and fan are taken from AIDA64

  After starting cold (current was cut, without entering the BIOS), machine runs dry without load

  

  Exactly the same thing--starting in cold, but go in the BIOS, do nothing and continue. Once again, no load

  

  This is after power off and resarting, but to let the PC network

  

  After the above, I used Prime95 to put the CPU support (use of 95-100%), and after an hour, the readings are:

  

  Note that even so, the fan was not particularly strong, but it's at 2222 rpm as in the first reading.

  If I play at 4K (the whole point of the PC ) the CPU so far got very warm, the GPU is but his fan turns up as planned.

  In conclusion, it seems that the POST has a problem because it does not slow down the fan after the test.

  I can live with let the machine always plugged into the sector (for example, most of the time) and I guess that's what most people do, but I would like to know what the problem is (for example if it's really something 10 Windows, or a bug in the BIOS/UEFI)

  Thank you very much!

  John

  Explain you a lot of people who maybe have returned their system immediately because of this? Others might judge normal sound. Not irritable average is not coming here to complain. Others might judge her so little. They simply don't like. You will never convince me that is not a BIOS problem. As the problem resolves itself when you enter manually each time. It can be reproduced every time.

• CPU cooler for HP Pavilion m9340f

  My CPU fan is kaput. Already replaced once the fan. You wanted to replace the entire unit. Nothing fits. Old radiator is to screw. Can't find the replacement with connector unit screw radiator and Fan 4 pin. I tried to Fry, Tiger direct. Now, using unit that does not match and is bad for the cpu's long-term survival. Any suggestions? Card mother ASUS IPIBL-LB, called Benicia replacement HP., heat sinks for socket 775 all seem to be units of punch - in.

  It is the part:

  Heatsink [chassis parts] 5187-8413 Contact Reseller  

   

• How can I access the CPU multiplier for the Intel Core 2 Extreme x 9000 processor

  I bought a Dell Precision M6300 with an Intel Core 2 Extreme processor. Now from what I've read the page on this system, it can run CAD and other graphics programs. Well, when I had him form the person he had Linux Ubuntu top. It worked fine until I erased the drive and installed my iso of Windows 7. It was REALLY SLOW. To the point, I couldn't watch videos with VLC and it took forever to load Firefox.

  I opened the Task Manager, and it was running at 0.59 GHz! This processor should be around 2.5 GHz. So I disabled the bios for the speed step options and he went up to 0.89 GHz and no longer.

  About a week went by and I now have 10 Windows and it works well, but always to 0.89 GHz I had done more searching and found ThrottleStop. Well, now I'm running at 2.5 GHz, but I need to run this program to have the CPU to where I want to.

  TL; DR y at - it updated for me to be able to access the CPU multiplier in BIOS? This is revision A15. I have an another Dell which is an XPS M1730 and it has a setting in the BIOS for him.

  You have 2 options:

  (a) run ThrottleStop all the time, that costs nothing or

  (b) replace the card mother and adapter which is not worth the time or evil or the cost of repair.

  The maximum speed by default for a 9000 X is 2.8 GHz.  Yes, it's a processor that is unlocked, but not all motherboards include this feature in the bios.  Some laptops allow the multiplier slots, one or two an increase while other motherboards allow any any overclocking in the bios.  It is the choice of the manufacturer.  If your laptop is still usable almost 9 years after the X 9000 was launched, there must be nothing to complain about.

  BTW, Windows Task Manager is not 100% reliable when they say the speed of these processors unlocked and it is not 100% reliable when they say the CPU so best to ignore these data.  ThrottleStop properly reported your CPU to 2992 MHz.  Be happy that there is a free solution available which can completely solve that problem for you.

• Time of CPU system (%) for the basic multi system

  Hello
  
  couple of questions about sub settings, measure processor or avg unique all the processorss and the processors use?
  for example I will receive alert time system CPU over 95% for the unique processors? or not
  
  Idle time (%) of the CPU
  Time CPU system (%)
  Time CPU user (%)

  couple of questions about sub settings, measure processor or avg unique all the processorss and the processors use?

  CPU utilization (%)
  For UNIX platforms, this measure represents the amount of CPU utilization in percentage of total CPU available processing power.

  http://docs.Oracle.com/CD/B28359_01/server.111/b28282/monitor.htm#CFAECIDG

• "Cooler" for the Satellite Pro L100 plate

  I recently bought a Satellite Pro L100 and would like to buy a plate cooler to go with it. After reviewing, the "Antec Notebook Cooler' looks good; but one of the comments mentions that this plate is useless for laptops with contributions on the basis (like mine).
  Can someone tell me if this is the case, or recommend an alternative?

  Hello

  In my opinion you n t need any plate cooler. If the laptop is placed correctly on the desktop and nothing interfere with good air circulation.

  Sorry, but in my opinion it's futility investment.

• H8-1214: upgrade of the H8-1214 cpu cooler

  I'm trying to upgrade the processor 6100 fx to fx-8150, but I'm having a devil of a time finding a CPU cooler that fits the card mother angelica. what most people don't understand, is that the card mother angelica uses am3 + socket mount Intel cpu cooler. Anyone know or recommend a CPU cooler that will handle 125W cpu, go in the small space, not cause problems with editing? I already have that tower coolers match or working, because of the large part using PINs instead of screws, mount the cpu because is screw in and most of the towers are high.

  I used the same CPU cooler on the fx-8150 and he ran very well because it was not overclocked.

• Cooling, it is good or bad for the Z5? Advice needed!

  Hi Sony'enthousiasts.

  I love my Sony Xperia Z5. It's a great phone! However, it becomes warm, especially during a hot summer day while using intensely or full sun! Just to be clear, my phone is not overheating.

  The problem:

  The problem is with the battery-life/performative and put in charge while the unit is hot. My phone seems slower load and unload faster when it's hot. Even the closing apps, the screen turns off / stand-by and restart the device do not change the apparent slowdown of the battery performance.

  Experience:

  Today, my phone was hot enough for heavy use. The battery is almost empty and I started to charge, without great results (just constant heat and a percentage or increase of five).

  I used a cool wet towel to remove heat. The towel was a little cooler than the phone. The body of the Z5 is designed to make the internal parts of the heat so my thought was to use the towel to cool the body of my Z5.

  The result:

  To my surprise, the phone can now be charged temperature as it always does. The performance as well. Of course, I was very happy with the results of this experiment of cooling

  My question:

  In light of this;

  1. you are not stupid (throw the Z5 in a freezer or keep it under water

  2. the difference in temperature is not extreme and the glass of the cracks

  Assists the Z5, with bad cooling for the device or the battery?

  Sony Xperia Support, please share your advice

  @VE_ . in my opinion I think this is a good procedure, but I prefer to cool naturally... but the way you describe it is not too drastic a cooling mode, by report you mention to some posts I saw for the Z complete series of phones to put it in a freezer or droppping in water, a much too sudden drop of temperature & asking for trouble

  I don't see your way of cooling affecting or damage to anything related to the components of the phone... but to point out it is my opinion & not Sonys

• HP 8000 Elite 8400 core2dou: PC HP Compaq 8000 Elite CPU cooling

  I bought these as refurbished and it works fine.

  Recently, I noticed that there is no CPU fan, or even support for a cpu fan.

  I watch other such online and noticed the same thing.

  This CPU is no need of a cooler?

  Hello:

  If you have the model of the SFF, the CPU is cooled by the chassis fan.

  Air of the fan through the heat sink and provides cooling for the processor.

  I don't remember if the fan blows air into the radiator or it away (it exhausts) taps into the heat sink.

  Just hold your hand close to the exit of the fan to feel which way the breath air.

  There should be a plastic fairing (fan baffle) on the fan and the heat sink.

  You can see the list of parts below...

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=4065894 & docLocale = en_US & docid = emr_na-c01944842

  The 8000 Elite CMT has a processor fan separated at the top of the heat sink.

• 15-R030SQ HP: HP 15-R030SQ has a heater / fan for the processor?

  Hello guys, I have a computer laptop 15-r030sq Hp and I think that this model do not have a fun / cooler for the CPU but I need an answer from someone that disassembling this laptop. Thank you

  He has a fan

  See article 13 page 19 in the list of distribution of the parts shown in the following book.

  http://h10032.www1.HP.com/CTG/manual/c04409502

• CPU COOLER DELL XPS 8700

  What are the coolers possible cpu that you can install on the card mother dell xps 8700 motherboard without any editing fancy ghetto. As if it were a normal MOM?

  The XPS 8500, the forerunner of the XPS 8700, has standard spacing Socket 1155. Taken 1150 share spacing of the 1155, and so according to me that a spare cooler should run.

  Cooler Master Vortex was perfect on my XPS 8500 motherboard, and I assume that the same would hold true for a XPS 8700. You will use the type of optical drive screws to fix the cooler for the Board of directors rather than fragile plastic bugs.

  Looking at a motherboard XPS 8700 on eBay, I can see a standard header for the fan on the CPU at four pins, as well as the XPS 8500.

• Satellite A200 - stop the CPU cooling fan

  Hello

  I got a Satellite A200-1CK and stop my CPU cooling fan. Not that my CPU is not getting enough cooling. But when I use my laptop to school for use for OS virtualization, it heats up, and the cooler will not turn.

  The CPU cooler is broken or is it just a setting in the bios?

  Greetz,
  Dion

  Hello

  You must understand that nobody does you any kind of diagnostic accuracy and if you want to have the correct answer, your laptop must be checked by a technician.

  Please check the BIOS settings, but on my A200 I can t see anything that can help.

• HPE - 590t: Suggestions for replacement CPU Cooler & case fan

  Hi all

  I would like to replace the fan in my HPE - 590 t.  Recently, he made loud noises and yesterday it sounded like a car was at my house with the idling of the maximum RPM.

  I know that some have recommended the Coolermaster Hyper 212 EVO in previous threads, however I have some concerns regarding this cooler would fit in my case, as it seems that I have about 1.5 inches of space to the left of the cooler and about 1' of headroom above the stock cooler.

  Here are the specs for my motherboard.

  I have a case of average size, I would be grateful any recommendation for the appropriate CPU cooler.

  Ideally, I'd like something that could last another two years and be as quiet as possible.

  HP DV9310 Windows 7 Professional 4 GB RAM
  
  DV7t-6100 Windows 7 Pro 8 GB RAM
  

  Ruette,

  I wanted to let you know that you were right about the question of the back plate on the motherboard.   I decided to order the aftermarket cooler that I mentioned, and when I went to install it, it appeared to be welded directly on the motherboard.  I was puzzled because I've never seen such a design.

  Because I could not remove the back plate, I couldn't install the new heatsink.

  Being faced with the choice of either ordering a heat sink used as you have suggested to the origin or the HP part since the website claiming to sell the stock heatsink heat, I decided to remove my HP Elite system and build a custom system.

  I built a new system with a motherboard MSI Gaming 5 and 4790 k i7 processor and used the ram, power supply, SSD, GTX 750 ti and other components in my system HP Elite for my new build. All these elements I just mentioned were anyway under a year of age.  Of course, I had to spend money on a Windows 7 operating system at retail, but also a new case, but overall it was worth the money. I also think that in the end I started to the cultivate my HP and it was just time for me to upgrade.  Now, that I'll stay with custom desktops built and stay away with OEM computers due to the unusual limitations that the OEM wants to place on their systems.

  Thanks again for all your help!

• Satellite P300 - the graphics card will be cooled for Autodesk Autocad?

  OK boys and girls to help out me.

  "HE receive me a new laptop, would be" Toshiba Qosmio G50 PQG55A-04J01Y "with"PQG55A-04J01Y of G50 Toshiba Qosmio G50/04J 2.66 Ghz, 4 GB DDR2", 18.4 Widescreen, NVIDIA Geforce 9600 M GT graphics card" card good Graphice.

  But that one was a step to go, it only came with Vista Home Premium, not on Windows XP. But they can get me this Widescreen "Toshiba PSPCCA-0C601Y 17.0" one"with" 2.66 Ghz, 4 GB DDR2 17 "Widescreen, ATI Mobility Radeon HD 3650 graphics.

  What is my questions, the graphics card will be cool for Autodesk Autocad / Civil3d 2010 ATI Mobility Radeon HD 3650

  Thanks Civil3Dave

  Hello!

  I n t have experience with Autodesk Autocad and I put t know why you ask if the graphics card will be cooled but on each laptop the CPU, the GPU and chipset will be cooled if it of necessary. If the laptop overheats.

  Maybe you should check the system requirements for the programs you want to install. So you can determine if the graphics card is compatible with the programs.

  I hope I could help a bit.

  Good bye