CPU frequency

Similar Questions

• Satellite M30-154: too weak CPU frequency

  Hello

  I'm Valerio... and I have a little problem with my Toshiba laptop.
  I changed the motherboard of the laptop and the keyboard with another Toshiba original.

  After changing the CPU frequency is set at 599 Mhz while the CPU should be 1400 Mhz.
  Why? I don't understand...
  Can you help me?

  Thank you!

  --
  Valerio

  After Exchange of DMI motherboard information must be rewritten.

• G510: CPU frequency stuck at 738 Mhz when the adapter is plugged

  Hello

  I am very frustrated

  I havea problem with my i7 4700MQ G510.

  When I plug in the power adapter the CPU frequency is set 798 Mhz

  When I unplug the power supply I can reach maximum 2.4 Ghz

  Obvisously I can't any turbo 3.4Ghz.

  Graphic adapter frequency is also falls to 200 Mhz when I plug in the power adapter.

  What is going on?

  Is there a fix... or is it a book buggy?

  My bios version is 3.05 and I know that the newer version is 3.09 but the bios update is available in Windows 8.

  I have windows 7

  Intel processor diagnostic tool shows down when you access the CPU frequency

  Giannis

  Totally amazing. The problem was due to be a universal power adapter that gives about 75-80 Watts... I tested another a nominal 95 Watts... but if you want to use a universal adapter you really want a great thing... 135 watts!

• ThinkPad T510 problem with the CPU frequency

  Hello
  I was a problem with the CPU frequency - in DC or battery it works 1/2 frequency (1196 MHz), but when my thinkpad plugged and is with battery it works OK (2400 MHz).
  Do you have any suggestions how to solve this problem.

  ThinkPad T510 (4384) intel core i5, 6 GB of Ram.
  Thank you.
  Best regards Nikolay

  What your seeing is actually normal and a result of power management settings. When it is on battery, the reduced CPU clock speed to improve the battery life and only increases in speed if a program requires processing power (games, adobe photoshop, CAD, etc.). If you wish, you can disable this feature by setting the "maximum performance" option in the Lenovo power management program and get into the bios and disable "Intel Speedstep" and similar power options setting. I hope this helps.

  -Brian

• Why the CPU frequency will be just said to 1189 MHz when the X 230 had AC power ONLY (battery removed)?

  Dear all,

  I bought a X 230 (i7) laptop.  I found that has removed the battery from the laptop and use only the power supply with the X 230 Notenook.  The CPU frequency will said to 1189 MHz.  It will not change no matter how the laptop program is running.  The CPU frequency will increase to 2.9 GHz or up to Turbo when the laptop with battery or battery and AC power.  Why the CPU frequency will be just said to 1189 MHz when the X 230 had AC power ONLY (battery removed)?  This is not good.  No matter which setting in X 230 Notebook need to change?  Help, please.

  Welcome to the forum!

  What you feel is the factory default setting. You may or may not be able to get around using an adapter 90 w instead of a 65W one, but I've generally not recommended to use the ThinkPads without a pile of work.

• My very low CPU frequency drops...

  Hello! I just bought an Alienware x 51 R3 and when I look at the AlienFX command center, I'm going to OCControls to take a look at my cpu frequency and I'm still at 0.90 to 1.20 GHz.

  No programs are open except Google Chrome.

  My processor is: Intel (r) Core i5 - 6600 k CPU @ 3.50 GHz

  Even when I click on the button to overclocking, it is always in the vicinity of 0.90 GHz.

  You will probably get a better response if you re - post it in the forum of the Club of Alienware .

• Critical patching of CPU frequency

  Anyone know where I can get a document or any suggestions as to what is acceptable in the industry as the patches critical CPU frequency should be applied? A customer is asking for suggestions... I am orginally saying only twice a year, but I need the documentation in support of this proposal. Any help would be greatly appreciated.

  See if this link helps - http://www.oracle.com/us/support/assurance/leveraging-cpu-wp-164638.pdf

  HTH
  Srini

• HP 15-5000na omen: locks of CPU frequency to 0.80 GHz

  Hello

  My CPU get locks to 0.80 GHz and will not upwards or downwards. At the same time, when the CPU is locked to 0.80 GHz

  computers portable fans running fast (loud) but air to come is not yet hot.

  I found a tool called Extreme Intel (r) utility of tunning to use as monitor "which continues with my system."

  I'm not overclocking or change something in the CPU.

  Tunning utility indicates the value of the "thermal Throttling" 100%, I think that this is the reason why the CPU remains at 0.80 GHz to inhabit because of this thermal regulation.

  Package Themperature and core CPU is normal around 40 ° c.

  All this information is visible in this photo:

  This problem is to come and go at random, when the problem that is happening and I restart the laptop, I get the error from the BIOS says: Enter system (90 b) fan - keep booting

  With the random combination of restarts, stop, unplug the power and plug CPU gets frequency walk again

  Thermal regulation becomes zero and fans to stop... and everything is going normally.

  When the CPU's frequency stepping and normal works if I reboot the system BIOS displays messages: System (90 b) fan.

  This happens once or twice a day and it's very anoing... I'm losing a 15-20 minutes to restart the plug... and so on until the disappearance of the problem.

  I have the latest BIOS for my laptop and installed all updates for Windows 10.

  Software of HP Support assistant shows also no update available.

  Best regards, spetrov

  Hello

  Just to update, I returned my laptop for repair under warranty.

  Warranty card shows the replacement of the motherboard.

  After replacement, not stuck to 0.80 GHz CPU more.

  Best regards, spetrov

• CPU frequency and bus on Satellite M30 is too low

  Hello

  The processor and my Satellite M30 bus seems to be significantly under speed. According to Windows XP Pro and Solaris Nevada, the processor is clocked at 600 MHz. The frequency of the BIOS, scaling parameter is set to "Still high", and I tried to disable ACPI in the operating system (ensuring no interference on the software side), without result. Power in the Toshiba Power Saver settings are all maxed out, so no scaling should be there either. Intel Processor Identification Utility reports the following:

  Reported expected
  Speed: 1.60 GHz GHz 0.44
  System bus: 400 MHz 294 MHz

  Note that the tool uses algorithms to determine the speed, rather than trusting the value returned by the operating system, that one of her aims purposes is testing for fraudulenty CPU overclocked by OEMs. The speed as it is for me is even more disappointing. I don't know how long it has been like that, but one thing to note is that the motherboard has been replaced last summer.

  Someone has an idea what here? Thank you.

  Edit: I also loaded the CPU with CPU-Burn to see if some heavy loads would get understandingly frequency. It has no effect.

  Hello

  If you use the advanced search option, you will find a few similar topics with the explanation very clear why unit works with 600 MHz only.

  In any case, after the replacement motherboard service must blink mainboard firmware. After doing this it will work at full speed. Because of this, I guess they forgot to do.

  It is not a big problem. Please contact again and explain the situation.

• Satellite A210 - 16G - problem of CPU frequency and memory

  Hey guys,.

  I had a problem with my laptop I can't solve, since I installed windows 7 RTM x 64 version.
  I noticed something is wrong after finding that my Windows experience index has fallen to 2.7 instead of 4.5, I used to have on Vista. For those who do not know my characteristics are:
  AMD Turion 64 X 2 TL-60, which I've got 2.7 of note, 4 GB Kingston DDR2-667 (333 MHz) - 4.4, scores of charts and hard drives are the same.

  I read in one of the forums that it may be a problem with the standby power options, but he did not get any option that says on the frequency of the processor changing according to the plan of the power. I also installed new version 2.0 of the website of Toshiba BIOS, but it only makes things worse: I've got 6.0 rating graphics of games but the Perf of Aero desktop is now 1.0!

  I installed diagnostic software: Everest and CPU - Z and I discovered that my CPU works with a frequency of 800 Mhz (the multiplier is 4 x, voltage 0.8V) and my DRAM frequency is 159.8 Mhz (I don't know if it's ok, but I know that 4.4 score is certainly too low although).

  So tell me guys, is this a problem of the operating system? Should I try to install the 32-bit version of Windows 7, or it won't change anything? Maybe I should try some software that would change the frequency of my FSB?
  I'm waiting for your answers, because I don't know what to do.

  Paul

  Aero needs a WDDM compatible graphics driver, then try to update the graphics driver on the Toshiba site

• Yoga1 11 s Haswell (4310y) - sluggish UI? Low CPU frequency?

  I know that the series is supposed to be slower than the series U, but I feel like this thing is abnormally slow on my GF Yoga 11 s. Task Manager indicates it only making .58ghz while trying to load the Sims 3 (I know that this game has problems, but it hardly seems to run about as well--surprisingly slow loading times). The Task Manager is incorrect? I think that the CPU is supposed to be 1.5 ghz. I also felt a bit slow machine regarding the user interface. For example, right click could be a small delay with regard to the context menu. Y at - it a setting or driver I'm missing here?

  Are you running on battery or sector? The default power plan seems to keep the system locked to a low frequency battery-operated.

• I was told there is a way to increase the CPU frequency on the new from3.5 of iMacs to until 4.2 is this true end 2015 27 "fusion 1 TB drive

  OK I end 2015 27 "Imac 1 TB fusion player upgraded to 24gigs of Ram. My Question, I was told when I bought what I could spped is my processor from 3.5 to 4.2 ghz theis true if yes, how can I do

  I was told when I bought that I have spped my 3.5 to 4.2 ghz processor...

  You can choose one of the three basic for this iMac model processors, which cannot be changed subsequently.

  http://www.Apple.com/iMac/specs/

  Intel 'Turbo Boost' can temporarily change a processor to operate at 4.2 GHz to 4 GHz. Maybe what you thought.

• Percentage of maximum CPU Windows 7 constantly frequency > 100%

  Under Windows, I find that my CPU fan runs constantly audible. The fan made ramp immediately after Windows starts, even with no applications running. Windows resource monitor shows the CPU usage in the range of 25 to 40%. However, the maximum percentage of CPU frequency is consistently above 100% (usually around 110-115%). This means that the system is too overclocking? If so, is it logical to deduce that this may cause the CPU fan to run so much? Finally, how can I get this back to 100% (or less)?

  The fan does not this way under MacOS.

  MB Pro (by 2012) running Windows 7 under Bootcamp (MacOS 10.11.6).

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• kernel_task runaway (from 300 to 600%) CPU with 2 external displays

  I have a MacBook Pro (retina, mid-2012), and for a year and a half, I've had episodes fighter during the kernel_task suddenly begin to consume all processor CPU (from 300 to 600%), is the response of the system so slow it is impossible to use.  I experience these episodes throughout the front 1-2 years that the machine went from Yosemite El Capitan and now Sierra.

  Normally, I use my MacBook with two external displays, both at work and at home.  At work, I have two external screens of Lenovo, and at home, I have two screens Apple (Apple Cinema Display 27-inch and 27-inch Apple Thunderbolt Display). I discovered that this kernel_task high CPU usage can only be stopped by disconnecting one of the external screens.  After unplugging an external display, the kernel_task subsides immediately to normal (< 5%).  After a few minutes, I can reconnect the 2nd external screen and proceed normally (sometimes for days, sometimes for hours, sometimes for a few minutes) until the kernel_task pulls up to 300-600% again.  The use of the high CPU kernel_task never happens unless I have two external displays connected.

  Note that since I upgraded to MacOS Sierra fugue kernel_task CPU frequency has increased considerably: of 1 kernel_task runaway every several days to a runaway almost every 10 minutes or so.   I don't have a reason this frequency has increased, but the runaway condition seems to have worsened by the fact that the photoanalysisd daemon is running like crazy on my grand (72 000) library of Photos.

  Also note that I started in recovery mode and have re-installed MacOS Sierra, and it has no effect on the runaway kernel_task.

  Any ideas on how to fix this resumption of kernel_task of all my CPU?

  I have attached my EtreCheck system report below.  This report was captured with two attached external displays.  At halfway while generating a report, the kicks and started kernel_task hogging CPU again.

  EtreCheck version: 3.0.5 (309)

  Report generated 2016-09-25 14:24:02

  Download EtreCheck from https://etrecheck.com

  Time 07:59

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Description:

  Sometimes, while working with my MacBook connected to two external displays, the kernel_task pulls up to 600 to 800% CPU and stays there until I unplug at least one of the external screens.  After disconnecting, the kernal_task subsides immediately to normal (< 5%).  After a few minutes, I can plug the 2nd external screen and proceed normally (sometimes for days, sometimes for hours, sometimes for a few minutes) until the kernel_task pulls up to 600 to 800% again.  The use of the high CPU kernel_task never happens unless I have two external displays connected.

  Hardware Information: ⓘ

  MacBook Pro (retina, mid-2012)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro10, 1

  1 2.6 GHz Intel Core i7 CPU: 4 strands

  16 GB RAM not extensible

  BANK 0/DIMM0

  OK 8 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 8 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en0: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 242

  Video information: ⓘ

  Graphics Intel HD 4000

  NVIDIA GeForce GT 650M - VRAM: 1024 MB

  Color LCD 3840 x 2400

  LED Cinema Display 2560 x 1440

  Thunderbolt Display 2560 x 1440

  Software: ⓘ

  macOS Sierra 10.12 (A 16, 323) - since the start time: about an hour

  Disc information: ⓘ

  APPLE SSD SM512E Disk0: (500,28 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Boromir (disk1) /: 499,05 (Go 140,24 free)

  Storage of carrots: disk0s2 499.42 GB Online

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. Apple LED Cinema Display

  ISight Apple Display Inc.

  Apple Inc. Audio display

  Apple Inc. FaceTime HD camera (display)

  Apple Inc. Apple Thunderbolt Display

  Apple Inc. Audio display

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Thunderbolt Inc. Apple display.

  Configuration files: ⓘ

  / etc/sudoers, 2299 but file size expected 1563

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / Applications/Beats Updater.app

  com.beatsbydre.BeatsDFUSupport [no charge] (2.1.0 - SDK 10.10 - 2015-10-29) [Support]

  /Applications/proxifier.app

  [no charge] com.initex.proxifier.macosx.kext (2.15.2b1 - SDK 10.7 - 2015-09-10) [Support]

  / System/Library/Extensions

  [no charge] com.makemkv.kext.daspi (1.5-2016-09-25) [Support]

  Startup items: ⓘ

  TiVoDesktop: Path: / Library/StartupItems/TiVoDesktop

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [no charge] 7 tasks Apple

  [loading] Apple 156 jobs

  [running] Apple 108 jobs

  Launch system demons: ⓘ

  [loaded] com.apple.jetsamproperties.Mac.plist (2016-08-25) [Support]

  [no charge] 41 tasks of Apple

  [loading] 153 jobs Apple

  tasks of Apple 109 [performance]

  Launch officers: ⓘ

  [cannot] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37a2 3d420d.plist (2016-07-11) [Support]

  [loading] com.cisco.anyconnect.gui.plist (2014-06-10)

  com.DisplayLink.UserAgent.plist [no] (2012-08-14) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-11) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2013-01-04) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2016-07-11) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-07-11) [Support]

  [loading] com.adobe.fpsaud.plist (2016-08-29) [Support]

  com.backblaze.bzserv.plist [running] (2016-07-11) [Support]

  com.Cisco.anyconnect.vpnagentd.plist [running] (2014-06-10) [Support]

  com.DisplayLink.usbnivolistener.plist [no] (2012-08-14) [Support]

  [loading] com.google.keystone.daemon.plist (2016-09-09) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2013-01-04) [Support]

  [loading] com.sharpcast.xfsmond.plist (2013-11-30) [Support]

  User launch officers: ⓘ

  com.backblaze.bzbmenu.plist [running] (2016-09-25) [Support]

  com.vladalexa.MagicPrefs.plist [running] (2016-09-25) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  HWMonitor Application (/ Applications/HWMonitor.app)

  Hidden CPULed Application (/ Applications/CPULed.app)

  Application of hidden activity monitor (/ Applications/Utilities/Activity Monitor.app)

  Dropbox application (/ Applications/Dropbox.app)

  Hidden SizzlingKeys Application (/ Applications/SizzlingKeys.app)

  Beats Updater Application (/ Applications/bat Updater.app)

  Hidden NET Monitor Application (/ Applications/Net Monitor.app)

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-15) [Support]

  QuickTime Plugin: 7.7.3 (2016-09-13)

  AdobePDFViewerNPAPI: 15.017.20053 - SDK 10.11 (2016-08-03) [Support]

  AdobePDFViewer: 15.017.20053 - SDK 10.11 (2016-08-03) [Support]

  Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-15) [Support]

  Silverlight: 5.1.20913.0 - SDK 10.6 (2014-03-07) [Support]

  JavaAppletPlugin: Java 8 update 101 build 13 (2016-08-18) check the version of

  User Plug-ins internet: ⓘ

  WebEx64: SDK-1.0-10.10 (2016-01-23) [Support]

  Safari extensions: ⓘ

  Ghostery - GHOSTERY, Inc. - https://www.ghostery.com/ (2016-03-15)

  3rd party preference panes: ⓘ

  Backblaze backup (2016-07-11) [Support]

  Flash Player (2016-08-29) [Support]

  FUSE for OS X (OSXFUSE) (2013-11-30) [Support]

  Java (2016-08-18) [Support]

  MagicPrefs (2016-01-20) [Support]

  MenuMeters (2014-10-22) [Support]

  TiVo Desktop (2009-11-23) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Boromir: Disc size: 499,05 GB disc used: 358,81 GB

  Destinations:

  Frodo Time Machine [Local]

  Total size: 999,86 GB

  Total number of backups: 40

  An older backup: 09/09/16, 02:09

  Last backup: 25/09/16, 11:49

  Backup disk size: too small

  Backup size GB 999,86 < (disc 358,81 GB X 3)

  Top of page process CPU: ⓘ

  345% kernel_task

  56% Information System

  44% cloudphotosd

  42% iTunesCacheExtension

  30% activity monitor

  Top of page process of memory: ⓘ

  1.44 GB kernel_task

  1.18 GB com.apple.WebKit.WebContent (6)

  786 MB mds_stores

  590 MB bztransmit

  Mdworker (18) 492 MB

  Virtual memory information: ⓘ

  256 MB of free RAM

  4 pm used GB RAM (5.96 GB being cached)

  768 KB used Swap

  Diagnostic information: ⓘ

  25 sep, 2016, ~/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-09-25-134618_ 13:46:18 [redacted] .crash

  System/Library/Frameworks/WebKit.Framework/versions/A/XPCServices/com. Apple.We bKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebContent

  25 sep, 2016, 13:19:15 /Library/Logs/DiagnosticReports/photolibraryd_2016-09-25-131915_[redacted].cpu_ resource.diag [details]

  /System/Library/PrivateFrameworks/PhotoLibraryPrivate.Framework/versions/A/Supp ort/photolibraryd

  25 sep, 2016, 13:06:44 test - passed

  September 22, 2016, 16:03:11 ~/Library/Logs/DiagnosticReports/Microsoft Word_2016-09-22-160311_ [redacted] .crash

  com.microsoft.Word - Applications / Microsoft Office 2008/Microsoft Word Word.app/Contents/MacOS/Microsoft

  Start safe mode, use this way and see if the problem is recurring

• Portege M200 - CPU runs only at 598 MHz! Basic BACK Toshiba Service tool

  Portege M200 - CPU runs only at 600 MHz

  I have a Portege M200 with a Dothan Pentium M 725 supposed to run at 1.6 ghz, but posts a 598 Mhz
  frequency. I updated the bios to 1.8.

  I read in a previous post "locked"...:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=63390

  .. He's supposed to be a base of BACK of Toshiba utility to fix the problem. .
  It is said that this is not a Bios problem...

  Can someone direct me to this utility?

  Thank you!

  Gary

  The answer is here... thanks all and who is responsible for:

  http://forums.Toshiba.com/T5/Qosmio-laptops/598-MHz/TD-p/194566

  The key is a utility called 'pom200t1 '.

  You will need the following.

  A floppy disk or if you do not have an external floppy drive, or if you are common sense to be able to boot a file from a CD player.
  You must also WinImage, as all files that you download come as .ima files
  Download pom200t1 - V1.5.zip and pom200t1.zip (if if doesn't work either).

  You can find them here:

  http://www.stormpaintball.com/Toshiba/pm765.bin (this one is a ditch last attempt).
  Then follow the instructions on the site I posted before:

  Symptom: CPU remains constantly 598 MHz.

  * Process: *.

  (1) boot in the BIOS. (Press "Esc" during the boot process, before the loading of the operating system, but after having entered your password, if you use the startup password protection).

  2) look under 'Other' category.

  (3) if the motherboard does not have enough information about the CPU, the category 'Dynamic CPU frequency Mode' appear on (you won't see it).

  If the laptop is in this state that he won't ever faster than 598 Mhz until you perform the following procedure.
  Note: Although this utility said it's for a Toshiba Portege M200, the particular difficulty you need may work on other Toshiba laptops.
  He has worked on 3 different Toshiba Satellite Pro M15 S405s, but * USE at YOUR OWN RISK *.

  (1) start Windows and create the startup disk in the pom200t1.exe file.

  (2) boot from the diskette you just made.

  (3) in the menu, select the initial repair option 2 "set config".

  (4) in the following menu, select option 1 'Initial cofiguration"(misspelled)

  (5) after a few seconds, you should see "Writing a file is over!" and the laptop restarts automatically without asking for confirmation.

  (6) when restarting the laptop go back into the BIOS and look under 'Other' category. You should now see the "dynamic CPU frequency Mode". Make sure it is set to "Dynamically switchable" for the CPU limitation.

  7) restart Windows and make sure that the CPU can throttle in normal conditions. The Intel SpeedStep technology icon should now be in the systray. Go to the Toshiba power management / Power Saver Properties and update all of your methods to save power to use technology SpeedStep that you prefer (fixed or automatic) and mount all caps speed processor, or you can go above 798 MHz because cursors will always be to their previous settings (4 or less), while they can now go up to 7. Let me know how you go.
  I have fixed the CPU now just need to find out why my fan only works when I activate it manually!