CQ61-319wm

Similar Questions

• Downgrade from Windows 7 64 for XP 64 bit for the Presario Compaq CQ61 - 319WM VM371UA

  HI - lets get right:

  You have now the Compaq Presario CQ61-319WM in front of you is preloaded with Win7, but you want to downgrade to your copy of XP64bit.

  Your system is:

  AMD Athlon II M300 64-bit multiprocessor Dual Core @ 2 GHz

  RS780/RS880 (M)<- your="" northbridge="">
  ATI Mobility Radeon HD 4200 (3400 variant?)<- your="">
  SB750<- southbridge="">

  1 unit comes with a 250 GB HARD drive. Replace it with another SATA HDD for your copy of xp64 bit before powering it, by registering and activating, seeing that this solution is not yet complete, saving your software Windows 7 preinstalled in this way.

  NOTE: Do not install Windows XP 64 - bit Edition on your current 250GB Win7. If you did get the Compaq CD to restore.

  Download nLite from 2 a. nLiteOS.com to integrate SATA drivers (called: "Slipstream") inside your Windows CD otherwise: BSOD. (recommended method)

  -or-

  2B. After changing BIOS to recognize the floppy USB download drive drivers SATA on diskette and the XP CD, press F6 to manually load these drivers SATA AHCI floppy.

  3. use your Slipstreamed CD and let XP starts normally (no key of F)

  -Si Windows successfully installed continue-

  4. now that XP64 bit runs the first thing that you want to install the .NET Framework 3.0 would be.

  5. install Visual C++ redistributable (free version)

  6 install the network driver. See below

  NOTE: 8102 & 8103 pilots would most likely work, not 8139 family.

  Here is a list of the most easy to install drivers:

  -Agere Systems HDA Modem - SOLVED!

  -Atheros AR9285 WiFi adapter - SOLVED!

  and the most difficult of them...

  -AMD Mobility Radeon HD 4200 shared memory<(unsolved)>

  -IDT High Definition Audio CODEC<(unsolved)>

  -Realtek RTL8139/810 x Fast Ethernet Adapter - SOLVED!

  -AMD AHCI SATA Compatible RAID controller - SOLVED!

  -ATI SM BUS - SOLVED!

  A breakdown of the versions of the driver that is used in our tests:

  ATI SM BUS

  /*
  Description of Driver ATI SMBus
  Date 26/02/2007 driver
  5.10.1000.8 driver version
  Provider of driver ATI Technologies Inc.
  Oem3.inf INF file
  Hardware ID PCI\VEN_1002 & DEV_4385 & SUBSYS_363F103C & REV_3C
  Location Information PCI bus 0, device 20, function 0
  PCI Device ATI SB750 - SMBus Controller
  */

  AMD AHCI COMPATIBLE RAID CONTROLLERS

  /*

  Driver Description AMD AHCI Compatible RAID Controller
  Date of the driver 17/03/2009
  3.1.1540.127 driver version
  Advanced Micro Devices, Inc. driver provider.
  File INF oem0.inf
  Hardware ID PCI\VEN_1002 & DEV_4391 & SUBSYS_363F103C & REV_00
  Location Information PCI bus 0, device 17, function 0
  PCI Device ATI SB750 - SATA AHCI Controller
   
  Device resources
  IRQ 22
  Memory D0408000-D04083FF
  Port 4010-401e
  Port 4030-4037
  4038-403(f) port
  Port 404 B-4048
  Port 404c-404F
  */

  AMD RAID CONSOLE

  /*
  Driver Description AMD RAID Console
  Date of the driver 17/03/2009
  3.1.1540.127 driver version
  Advanced Micro Devices, Inc. driver provider.
  File INF oem0.inf
  Hardware ID SCSI\ProcessorAMD___RAID_Console___1.00
  Place of information Bus number 0, target 10 ID, LUN 0

  */

  ATHEROS AR9285 WIRELESS INTERMEDIATE DRIVER

  /*
  Description of Driver Atheros AR9285 802. 11 b / g WiFi Adapter - wireless driver intermediate
  Date of the driver 16/03/2009
  1.0.0.92 driver version
  Driver WS provider
  Oem8.inf INF file
  Hardware ID wsimdmp

  */

  ATHEROS AR9285 WIRELESS NETWORK ADAPTER

  /*
  Description of Driver Atheros AR9285 802. 11 b / g WiFi adapt
  Date 2009-06-22 driver
  7.7.0.348 driver version
  Driver Atheros vendor
  Oem7.inf INF file
  Hardware ID PCI\VEN_168C & DEV_002B & SUBSYS_303F103C & REV_01
  Location Information PCI bus 2, device 0, function 0
  PCI Device Atheros AR9285 802. 11b / g Wireless Network adapt
   
  Device resources
  IRQ 17
  Memory D0100000-D010FFFF
  */

  REALTEK ETHERNET CARD WIRELESS INTERMEDIATE DRIVER

  /*
  Driver Description Realtek RTL8102E/RTL8103E family PCI-E Fast Ethernet NIC - wireless driver intermediate
  Date of the driver 16/03/2009
  1.0.0.92 driver version
  Driver WS provider
  Oem8.inf INF file
  Hardware ID wsimdmp

  */

  REALTEK ETHERNET CARD DRIVER

  /*
  Driver Description Realtek RTL8102E/RTL8103E family PCI-E Fast Ethernet NIC
  Date 25/09/2008 driver
  5.706.925.2008 driver version
  Driver provider Realtek Semiconductor Corp.
  Oem28.inf INF file
  Hardware ID PCI\VEN_10EC & DEV_8136 & SUBSYS_363F103C & REV_02
  Location Information PCI bus 3, device 0, function 0
  PCI Device Realtek RTL8139/810 x Fast Ethernet Adapter
   
  Device resources
  IRQ 18
  Memory D0000000-D000FFFF
  Memory D0010000-D0010FFF
  Port 2000-20FF

  */

  AGERE SYSTEMS HDA MODEM

  /*

  Driver Description Agere Systems HDA Modem
  Date 21/11/2008 driver
  2.1.92.0 driver version
  Provider of driver Agere
  Oem30.inf INF file
  Hardware ID HDAUDIO\FUNC_02 & VEN_11C1 & DEV_1040 & SUBSYS_103C137E & REV_1002
  Rental Information Bus internal High Definition Audio
  */

  On our test unit CQ61 we currently have ALL but TWO missing drivers. the Audio driver and the video!

  After consultation with AMD, IDT and Insyde each has decided that this problem is with Compaq "Softpaqs Engineering Team", in the meantime a viable solution. Support for Compaq of level 2 has been unable to help in this case, however, agreed to intensify this concern to the "level 3" (genius).

  "Diversity is the key to break the monotony" Obviously, still a challenge for the Presario team in this area.

  Our testing shows that the problem exists in the firmware of the cards mothers; Perhaps the BIOS. Insyde (SSII BIOS) indicated that HP/Compaq has the "sp?.» solution "exe" and refused further assistance because of HP/Compaq contracts. "

  So why Compaq insist on locking/force their users in Windows 7, without other Windows based operating system options for this model and others who are currently in production? We're going to investigate.

  Currently, Windows XP 64-bit Edition is still being supported by Microsoft after January 10, 2010. So why not HP?

  Finally.

  Here we have the more stable driver, for most official, complete the value for the model CQ61 running XP64 (and possibly XP as well). It concerns all the drivers listed below:

  Driver SATA AHCI-

  Bus - SM

  -Realtek Ethernet Controller

  -ATI Mobility Radeon HD 4200 video driver

  Driver Modem Agere-

  -Atheros WiFi driver

  Use this forum as the timestamp.

  There were too many sources to the list for the updated driver, so a full driver package was created in place to keep things simple, without all the headaches of doing it yourself.

  This package should work on XP 64-bit operating systems based and is released as is. The instructions are inside each directory.

  NOTE: After downloading Please run the 1st prerequisites folder, then all other folders depending on numbers starting with 1 ( 0 record is for your slipstream). Here are the details of the file:

  Compaq CQ61-319WM Presario VM319WM Driver for XP64bit.7z

  MD5 Checksum = 7AAA90D0C06778630CF1117CEB318974 MD5 download www. MD5summer.org /

  As always with any software Please check against your trust of anti-virus software on a clean system.

  You will need 7zip, which can be downloaded from www. 7-zip.org in order to extract its contents.

  Download here.

  Last NOTE: If MD5 checksums do not match after downloading, remove it immediately. In this community, we are here to assist you in all possible ways to make your life a little easier with the PC. This is an ongoing process and the development of this package has been a joint effort from many sources. However, we remain optimistic for the official drivers of HP if they also, we support the cause as highlighted in their slogans and advertising. All in all societies can only works in their resources when it comes to projects like this however... "Diversity is the key to break the monotony", that's why we all think alike. We will stay hopeful. Thank you for your support. * UART *.

• CQ61-319WM and AC twin memory RAM speed

  I bought the CQ61-319WM with / 3 GB or RAM.  The provided configuration is a badly matched set of a 1 GB SODIMM (A-Data) and a 2 GB SODIMM (Samsung).  According to CPU - Z 1.54, both pieces is 400 MHz (DDR2 - 800 MHz), latency CASE 6-6-6-18-24 and according to Memtest86 + 4.00, the result is speed of the RAM of 3481 MB/s using 64-bit transfers (single channel access).

  Upgrading to a configuration usually total memory dual channel results in a good Speed up, I decided to replace the 1 GB SODIMM with another 2 GB.

  I had a piece of 2 GB to another previous project, but it was a version special high speed with latency CASE of 5-5-5-18-23.  I decided that a pair of them so completely taken over would be the best that I could reach, so I bought a second piece (about 80 $ CAN) and put them in.  I've also upgraded the BIOS F.13 (and my Memtest86 + 4.10).

  The result is better, but not as good as it could be.  Reports of CPU - Z full CASE 5-5-5-18 is used and I think it's saying that the dual channel is active (or he's saying that the RAM can support double channel - I am not sure).

  Memtest 86 + (4.00 and 4.10 versions) indicate that the CASE has indeed changed to 5-5-5-18, but that access is still 64-bit (single channel) and the speed of RAM increased to 3614 MB/s.

  3614 MB/s is faster than 3481 MB/s, it is not as fast as I expect 5-5-5-18-23 memory to be if it is currently running dual channel (128-bit access).

  I believe that the BIOS has probably decided to stay "single channel" because the RAM is in a configuration that was unexpected (because the latency CASE is too fast).  However, this probably means that if I buy another piece of 'standard' 800 MHz DDR2 (CASE 6-6-6-18-24) and install it with the original Samsung RAM, it will probably run at full dual channel (128-bit).  Such a configuration should be faster than what I'm running now, despite the fact that the RAM by piece real speed is slower.

  Anyone used this RAM (2 x (2 GB, 800 MHz, CL6)) the installation program?  Can anyone confirm that the result is a configuration complete dual channel?  I can buy the RAM, but if she does not run dual channel, so it's just a waste of money.

  Note: It would certainly NOT let fall to the bottom as for two-channel to 667 MHz.  Such a decline would result in approximately 2600 MB/s even double channel speeds up access.

  I heard generally good.  Curiosity prevailed, and I bought one more piece of RAM.  This piece has been another 2 GB DDR2 800 MHz SODIMM, but this time with the same latency than the original equipment numbers (CASE 6-6-6-18-24).  I installed it with the original Samsung CQ61-319WM and speed of memory that result was exactly the same as the pair (CASE 5-5-5-18-23) faster RAM.  The computer has finished 3-pass of Memtest86 + 4.10 as the fastest pair of RAM, confirming also the speed.

  This tells me that the speed increase had nothing to do with issues of latency, and she had to come from the increase in speed of access memory (128-bit) 'Dual Channel '.

  As to why Memtest86 + 4.10 is reported as "single channel", I feel that the answer may have to do with the RAM 'Side Port' CQ61 graphics system.  According to published specifications, this computer has 128 MB GDDR2 (and memory).  It does not say how this memory is configured.  If it is the only channel (128-bit), then it could be that Memtest86 + sees.

  To confirm this, I took the pair of quick latency RAM and put it in another computer that uses an older AMD 690 chipsets, and the same pair of RAM ran in dual channel mode on the other computer, but at a lower speed of 667 MHz.  Therefore, it seems that AMD memory controllers have probably no problem with this pair of RAM running in dual channel in general.

  While nothing that I've done is quite conclusive, indicates that this computer was probably working with access memory dual channel for two configurations of 4 GB RAM I used.

  In any case, I'll leave the slower RAM in the computer because whenever I change my configuration of memory, I have to lose more than 3 hours running Memtest86 + to check it's OK.  If I did not need to get an acceleration, I will use the faster RAM later in something else.

  There might be a reason to use the best of the RAM (which is probably more recent technology and probably using a little less power), but I don't want to spend more time on this issue.

• Compaq Presario CQ61 - 319WM: black screen

  It's laptop from a friend so I don't know much.  When I hit the power button, I hear that the machine is turned on, but the screen remains black without any indication that it is on.  I've connected to an external monitor (work) & does not show anything on anyone.  I out the battery & did a "hard" reset... for nothing doesn't.  I checked to make sure that the hard drive & RAM were sitting safely.  Where should I go from here?

  Hello

  > could please turn off the computer

  > and keep tapping the F2 and restart the compuetr will need you screen HPSA

  > try to do a test of the system

  > If your unable to enter this screen

  > then there is a problem with the video card

  I work on behalf of HP
  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution.
  Click the right to say 'Thank you' for helping on Bravo 'Thumbs Up'!

• How to download driver Ethernet with no Internet? CQ61-319WM

  I had to put one off full of my computer and I lost my Ethernet driver. I am unable to connect to internet from my computer and cannot get here at work. Help

  You'd have to do is download and put it on a CD - R (or another recordable media) or a USB drive and then take home and install the driver.

• HP Compaq has a black screen at power up... The BIOS Corruption failure?

  I have a Compaq Presario CQ61 product: VM9496Q2X model: CQ61-319WM series: [edited by moderator serial number], which has a black screen when I turn on.  The wifi button stays red and the caps lock flashes twice.  I think that it indicates a BIOS curruption faliure.  I tried to reset by unplugging and removing the battery and holding the power for 30 seconds button.  I tried the f8 key and esc repeatly to power upward. I also tried pressing the windows and the B key and the power key, but nothing has worked.  Any help would be greatly appreciated!

  I'm very disappointed with the lack of response of an HP Service Technician.  I ended up taking my laptop to a computer repair shop.  My problem is that the graphics card has become dessoudée of the motherboard.  They have rearranged my motherboard and it works fine.  fix $ 79.00.

• Cannot get the keyboard to work screen

  I can't get my on screen keyboard to work. I have a Compaq Pressario cq61-319wm laptop with Win 7 Home Premium.  I pull up, click on the letters, nothing shows up on the screen.  I'm a lumberjack?

  Open Notepad, and then click one of the buttons on your keyboard to the screen. I think you must be in an application that is waiting for input.

• CQ61-420US and Erorr 0 * 7 b

  Hello!

  I bought the USA CQ61-420US laptop but can not configure XP Home SP3

  I liked in this topic: drivers for XP (solution on BSOD 0x0000007B) SATA

  But it the same blue screen

  Ok:

  (1) I used 32bit_ATI_SB7xx_RAID & driver SATA AHCI_driver_v9-4_WHQL and sp43839 and intagreted in ISO. Same Blue Screen.And hit f7 and f6 during load.

  (2) P\N: WA976UA #ABA

  SATA 3 hardware ID) is:

  PCI\VEN_1002 & DEV_4391 & SUBSYS_363F103C & REV_00
  PCI\VEN_1002 & DEV_4391 & SUBSYS_363F103C
  PCI\VEN_1002 & DEV_4391 & CC_010601
  PCI\VEN_1002 & DEV_4391 & CC_0106

  Thank you very much!

  Your Setup still does not work after hitting F7 or it works? (do not hit the F6, F7 only)

  If that fails, start over with a clean copy of XP on HDD (delete the old files) and try the driver HERE select the x 86 only in the wake if you install XP 32 bit.

• COMPAQ PRESARIO CQ61: Error ENTER PAST ADMINISTRATOR OR POWER ON PASSWORD password

  Recovery Bios Password COMPAQ PRESARIO CQ61 operating system: Microsoft Windows 10 (64 bit) Hello, I have a COMPAQ PRESARIO CQ61 and suddenly asks me the password of the bios. The message that appears is "ENTER password or POWER ON PASSWORD". What can I do? After failing 3 times I get the message "System disabled" and the code 59329588

  Please try-

  46081508

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the button white Thumbs Up on the right of say thank you*.

  Make it easier for others to find solutions by checking a response 'accept as Solution' if it solves your problem.

  Thank you

  GBL84

  I'm not an employee of HP

• Presario cq61: presario cq61 is not lit

  Hello world!

  I have a Presario CQ61 and it no longer turns. The battery was always low... so I used it still connected to the power adapter... In any case it does now... I tried without battery, to swap the RAM, to use just one bank of RAM and then the other. I tried to disconnect the wifi module... I checked the HD and saved it (it works)...  One thing is... When I connect to the decision-making power, the corresponding led lights for just for 1 second and then turns... I'm sure that the battery is not working...

  I read on the forum and it seems a flaw of the motherboard... but my question is... can it be possible this is a battery issue...

  I mean did the cell phone one needs work and charged battery (or at least with a % of load) connecting with the power supply to turn on?  so is it a problem for the 0% charged battery?

  Thanks in advance!

  Concerning

  Alex

  Hi Alex,

  Unfortunately, it's probably a problem with the motherboard - the laptop should work perfectly when the AC adapter is plugged in even with the battery removed.

  Kind regards

  DP - K

• Compaq presario cq61: PROBLEM STARTING WITH PRESARIO CQ61... CAPS AND NUM LOCK FLASHES every 4 seconds!

  Hello! I have a problem with the starter. When I try to boot my laptop, my screen is black and Maj CapsLock and numlock just Flash every 4 seconds. Then I go to your page to download the BIOS. Well, when I dl and install Recovery BIOS for Compaq Presario CQ61-420EM get some InsydeFlash application, what is it for? I saw in the video that you get HP system BIOS update utility tool and that is the problem for me, I don't understand this application, instead, I get this "InsydeFlash" I don't know what is! HELP PLEASE!

  Hi @patrik13,

  Thank you for the update and confirmation.

  You would be kind enough to mark the post that solved your problem as accepted solution to help others who may have the same experience as you.

  Thanks in advance.

  Good luck with the repairs.

• which processors I've upgraded to I have a compaq presario cq57-319wm windows 7 64 bit

  which processors I've upgraded to I have a compaq presario cq57-319wm windows 7 64-bit like faster processor, I have an AMD C-50 processor now

  The following CPU's option upgrade processors

  AMD® E450 1.65 GHz processor (dual-core, 18 W)

  √
  AMD E350 1.60 GHz processor (dual-core, 18 W)
  √
  AMD E300 1.30 GHz processor (dual-core, 18 W)
  √
  AMD C50 1.00 GHz processor (1, 0 MB L2 cache, dual core, 9 W)

  One of the first three three registered will have a remarkable performance superior to the simple core currently installed C50.

  Coupling of those with a SSD drive for an upgrade and you won't believe it's the same laptop.

• Compaq Presario CQ61-430SV: model of motherboard

  I have a Compaq Presario CQ61-430SV I would like to know the reference number of the motherboard has this laptop. Can someone help me?

  Map of discrete PM45 system for use with separate computer models, select (including integrated modem Digital Media Slot and replacement thermal material) 517838-001

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• PRESARIO CQ61: WINDOWS 7

  Apologies in advance as im not qualified - basically I have an old laptop CQ61-310SA that has been idle since 2009. beginning of the year that I turned on and it wouldn't start - so with the help of a friend he wiped and the free windows 10 has been installed now windows 10 has expired, and obviously there is no previous system so he could go back too.

  My question is I have still the key is there anyway to install windows 7 - originally there was no disc it was

  pre-installed.

  Thanks in advance for anyhelp

  Yes any. HP no longer available to order recovery disks and there is no recovery partition so you couldn't make them. The only way is to get your hands on a disc of Windows 7 that is not retail but OEM. Microsoft used to make these images of disks available for download but stopped doing that a few years and we're supposed to not legally bind you to any sites alternative still mirrors host of these disk images.

  Your licensed operating system is Windows 7 Home Premium 64-bit, and if you can find the disk image, you can use your key Code to activate it. It's the part number from Microsoft for the disk image you want:

  X 17 - 58997.iso

  Above is a link, but not to the disk image. It will take you to a Microsoft site. You can also buy online OEM drive. This is an example:

  http://www.eBay.com/ITM/Microsoft-Windows-7-64-bit-Home-Premium-OEM-full-version-w-Service-Pack-1-/152266757969?hash=item2373ce5751:g:9iYAAOSwPCVX9iTb

  Get a savvy computer person to help you to find it while avoiding the bad sites and download the image and make a record of it and you can reinstall Windows 7 Home Premium 64-bit. Pilots are always posted here. Post back with more questions.

• Compaq Presario CQ61, unable to boot the laptop

  Compaq Presario CQ61 running Windows 7 Home Premium (build 7601) bought about 4 years ago.

  Computer failed to restart after a period of sleep.  I suspect that it doesn't have an automatic restart after automatic installation of an update - it's only a guess because I have no access to the computer at the moment, but I had a similar problem recently - on this occasion, I got a 'Safe Mode' start - by pressing F8 repeatedly gave me access to the appropriate screen.  I've implemented subsequently by restoring the system to a point just before a automatic installation of a critical Windows Update, and that seemed to do the trick.

  On this occasion the F8 route has no effect on the problem; the 'caps lock' and 'NumLock' continually of the blink just of LED (i.e. not a limited number of times), the fan starts, but there is no other sign of life.  I tried a hard restart, but without result.  I also removed and replaced memory, but once again no effect.

  Can you please advise.

  I'm so sorry I couldn't help you solve the problem, but maybe you could try to free the keyboard, nothing will happen if you do not lose the cpu and tight again. I know that the keyboard one is hard, persevering, best wishes.