Crashing, restarting itself 1000008e

Previously this computer installed windows 8 and its fine. Recently :( BSOD occurred. so, I went back to windows 7, but all the same, but its decline. its hardware problem?

Signature of the problem
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Files helping to describe the problem
120312 26676 - 01.dmp
SysData. XML
WERInternalMetadata.xml

See a temporary copy of these files
WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

Additional information about the problem
BCCode: 1000008e
BCP1: C0000005
BCP2: 930D6BD9
BCP3: 9C413BE4
BCP4: 00000000
OS version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Dump: https://skydrive.live.com/redir?resid=76D84FEB6F123193! 128 & authkey =! AIYkaUUCEuhXPqA

Hello

Don't forget to check for malware, in particular RootKits that can survive in a format and
Re-installing Windows (see methods in the 3rd message).

If no malware this question looks more material however the BIOS, chipset,
or a few other pilots of low load (such as video) could be involved. Given that the
question presented themselves at the time of installation of Windows 8 and the current installation of Windows 7
which departure also almost all the possible causes of software.

Remove ALL power and then reinstall the cards, memory and cables (both ends when
possible) - actually delete and replace - do not just tight. Clean the dust bunnies,
Turn off vents and make sure the fans are working. Try adding a small fan blowing in
the inlet to reduce the effects of heat. (Associated heat does not always mean there
is an excessive amount of heat. Rather a component might be too sensitive to even the
normal levels of heat).

===================================================

Results verified by WinDBG and DumpCHK BlueScreenView

The Bug_Check was 1000008E CAUSE win32k.sys which is a component of Windows
which means something else he has led astray.

1000008E error checking, {c0000005, 930d6bd9, 9c413be4, 0}
Probably caused by: win32k.sys (win32k! InternalGetIMEOwner + 19)
MODULE_NAME: win32k
Nom_image: win32k.sys
FAILURE_BUCKET_ID: 0x8E_win32k! InternalGetIMEOwner + 19
BUCKET_ID: 0x8E_win32k! InternalGetIMEOwner + 19

1. search for malware - especially RootKits (see methods in the 3rd post down).

2 remove ALL be able to reinstall and clean the components of the computer as suggested above.

3 check memory very carefully. Remember that does not detect the memory tests
all errors such as differences in tiny speed between the memory modules that appear to
be identical. Thus, it may be necessary exchange the modules in and out in different com-
binations and models (see test methods of memory in the next message).

4. check with BioStart Support, their documentaton online and pilots. Look for them
update the BIOS, chipset of low-level drivers and major embedded and separated
device drivers. DriverView execution - VIEW driver Microsoft set hide - updated from those
without drain in their names (see methods of updating the driver in the next message).

BioStar
http://www.Biostar-USA.com/app/en-us/

BiosVersion = 080014
BiosReleaseDate = 21/04/2010<- check="" for="" updates="" to="" the="" bios,="" low="" level="" chipset="">
and drivers of major on-board and separate devices.
SystemManufacturer = BIOSTAR group
SystemProductName = A780L3G
BaseBoardManufacturer = BIOSTAR group
BaseBoardProduct = A780L3Gz

5 use ALL other methods in the troubleshooters below.

6 after using all the methods in the 1 to 5, IF problems continue execution of driver verifier
to see if it shows any CAUSE (see methods in the next post).

=========================================================

Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

===============================================================

BCCode: 8th 0x0000008E is the same as 0x1000008E

Two main causes of these blue screen video drivers and BIOS - check with the system manufacturer
Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
other pilots to check there. Disable the installation of self as those who are older and if
Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

See the methods of update driver generic and verify the implementation of driver verifier in the next
Message.

BCCode: 8th 0x0000008E is the same as 0x1000008E

Bug Check 0x8E: KERNEL_MODE_EXCEPTION_NOT_HANDLED

A value of 0x0000008E KERNEL_MODE_EXCEPTION_NOT_HANDLED bug control a. This bug check indicates that a kernel-mode application has generated an exception that the error handler did not.

Important info if you received a STOP Code

If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

Parameters KERNEL_MODE_EXCEPTION_NOT_HANDLED

The following settings appear on the blue screen.

Parameter Description

1

The code for the unhandled exception

2

The address where the exception occurred

3

The trap frame

4

Reserved

Cause

Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

Common exception codes are:

  • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates that an unaligned data reference was encountered.

  • 0 x 80000003: STATUS_BREAKPOINT indicates that a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

For a complete list of exception codes, see the Ntstatus.h file located in the directory Inc. of the Microsoft Windows Driver Kit (WDK).

Resolution

If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.

  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.

  • Try changing video cards.

  • Check with your hardware vendor for updates to the BIOS.

  • Disable the BIOS memory options such as implementing caching or shading.

    • If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

    If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the computer has booted with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the computer is started with the Switch/DEBUG .

    In case of exception code 0 x 80000002, the trap frame provides additional information.

    If you do not know the specific cause of the exception, consider the following:

    • Hardware incompatibility. Ensure that any new hardware that is installed is compatible with the installed version of Windows. For example, you can get information about compatibility with Windows 7 in the Windows 7 Compatibility Center.

    • Service system or driver faulty device. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

    If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Find and delete all the cache files, temporary files that you do not have to have Internet, backup application and .chk files files that contain fragments of file saved disk scans. You can also use an another hard disk drive with more free space for the installation.

    You can solve the problems of BIOS by upgrading the version of the system BIOS.

    BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="" this="">
    * 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-

    =============================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers to 7
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    Stop Windows 7 to automatically install device drivers
    http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

    How to disable automatic driver Installation in Windows 7 / Vista
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

    Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
    Ultimate and Enterprise)
    http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

    Tags: Windows

    Similar Questions

    • Windows 8 explorer.exe crash/restart of cycle - all solutions?

      I was stuck in the cycle of crash/restart explorer.exe since September now and I am curious to know if there are definitive solutions. A fix would be nice...

      Details
      I installed Windows 8 Pro x 64 September 18 (reliability monitor information). The first instance of this crash/restart cycle was September 24. Then, I tried to find out what happened on this day: there was an automatic installation of an update of definition for Windows Defender (KB2267602 (definition 1.137.336.0).) Looking at the previous day, the following are installed:
      • Google Drive
      • Update Google Helper
      • Microsoft Hardware USB keyboard
      • Microsoft Hardware USB mouse
      • Generic Non Plug-and-Play monitor
      • AccuWeather.AccuWeatherforWindows8
      • InvokeITLimited.TableClock
      According to the reliability monitor, the problem occurs about fifteen to twenty-five times a week. The level of reliability varies from 1 to 4. (I don't know what the vertical scale means that there is no label.)
      In Event Viewer, this is a typical mistake:
      The failing application name: explorer.exe, version: 6.2.9200.16433, time stamp: 0 x 50763312
      The failed module name: ntdll.dll, version: 6.2.9200.16420, time stamp: 0x505ab405
      Exception code: 0xc0000374
      Offset: 0x00000000000ea485
      ID of the process failed: 0 x 1248
      Start time of application vulnerabilities: 0x01cdd502eff7d1ec
      The failing application path: C:\Windows\explorer.exe
      The failed module path: C:\Windows\SYSTEM32\ntdll.dll
      Report ID: a991c3a6-4169-11e2-be88-e06995f573cd
      Faulting full name of the package:
      ID of the failed package-parent application:
      Every mistake I checked has the same code exception and faults of program and modules. (Besides - I tried to click on the "Event log online help" link but get an error itself is in error, but it's a slow minor compared to the issue of cycle explorer.exe crash/reboot.)
      I just started going through applications Windows 8 and uninstall, in hope, where is the problem. (One interesting thing is that the issue almost never happens when I'm not using my computer - it occurs most often when I save a file in a program (it is often with Photoshop Elements, but this is not the only program that seems to induce the cycle crash/restart).) At least the file I save is not damaged...
      Information System
      Windows 8 Pro
      Processor: Intel Core I7-3960 X
      RAM: 32 GB
      System type: 64-bit OS
      Motherboard: Intel DX79SI
      Graphics card: NVIDIA GeForce GTX 670
      Paving work my OS ("Refresh") is not really a solution (solving a problem by clearing, it is not a fix - it is a hope).
      Just for fun, I ran scf - he said he couldn't find any errors ("Windows Resource Protection not found any breach of integrity.").
      Thanks for reading in a lengthy post.
      Stuart

      You are welcome.

      After the back if the problem persists.

    • Why my MacBook Pro restarts itself?

      I got my MacBook Pro for nearly 6 years. MacBook Pro (15 in.) Mid 2010 model). I got a new hard drive installed a year ago, I still need a new battery, but I don't think that's the problem. It restarts itself much in the day. Sometimes it restarts itself a few minutes yet.

      That's what would give me the report:

      Can someone help me please? I wouldn't give up my MacBook Pro. I love it too.

      Anonymous UUID: E9F076F9-0F1F-578E-E243-7D428C2E3CD4

      Thu Mar 24 20:39:52 2016

      Panic report *.

      panic (cpu 0 0xffffff7fa0a37bd5 appellant): "panic GPU: 7f [< no >] 5 3 0 0 0 0 3: NVRM [0 / 1:0:0]: error 0 x 00000100 reading: CFG 0xffffffff, 0xffffffff, 0xffffffff, BAR0 0xd2000000 0xffffff90c9e1d000 sControl-3.12.6/src/AppleMuxControl/kext/GPUPanic.cpp:127 P3/4\n"@/Library/Caches/com.apple.xbs/Sources/AppleGraphicsControl/AppleGraphic 0x0a5480a2, D0,

      Backtrace (CPU 0), frame: return address

      0xffffff90b83ab1c0: 0xffffff801d8dab12

      0xffffff90b83ab240: 0xffffff7fa0a37bd5

      0xffffff90b83ab320: 0xffffff7f9e6bbfa4

      0xffffff90b83ab3e0: 0xffffff7f9e788add

      0xffffff90b83ab420: 0xffffff7f9e788b48

      0xffffff90b83ab4a0: 0xffffff7f9ea0da23

      0xffffff90b83ab610: 0xffffff7f9e7acb79

      0xffffff90b83ab630: 0xffffff7f9e6c2cfd

      0xffffff90b83ab6e0: 0xffffff7f9e6c0690

      0xffffff90b83ab8e0: 0xffffff7f9e6c291f

      0xffffff90b83ab9d0: 0xffffff7f9ff403ce

      0xffffff90b83aba30: 0xffffff7f9ff3d05f

      0xffffff90b83abab0: 0xffffff7f9ff274e4

      0xffffff90b83abaf0: 0xffffff7f9ff1e43b

      0xffffff90b83abb50: 0xffffff801dee0926

      0xffffff90b83abb80: 0xffffff801dee21f0

      0xffffff90b83abbe0: 0xffffff801dedf277

      0xffffff90b83abd20: 0xffffff801d997cc0

      0xffffff90b83abe30: 0xffffff801d8df283

      0xffffff90b83abe60: 0xffffff801d8c28b8

      0xffffff90b83abea0: 0xffffff801d8d2665

      0xffffff90b83abf10: 0xffffff801d9b8bda

      0xffffff90b83abfb0: 0xffffff801d9eca96

      Extensions of core in backtrace:

      com.apple.driver.AppleMuxControl (3.12.6) [44D361A1-4938-3AA5-9F73-9C909B66214B] @ 0xffffff7fa0a29000-> 0xffffff7fa0a3cfff

      dependency: com.apple.driver.AppleGraphicsControl (3.12.6) [1654475C-9A4B-386C-AFA8-0A530194A 2F9]@0xffffff7fa0a21000

      dependency: com.apple.iokit.IOACPIFamily (1.4) [5D7574C3-8E90-3873-BAEB-D979FC215A7D] @0xfffff f7f9e4e9000

      dependency: com.apple.iokit.IOPCIFamily (2.9) [4FE41F9B-2849-322A-BBF8-A94816C003D6] @ 7f9e13d000 0xffffff

      dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [172C2960-EDF5-382D-80A5-C13E97D74880] @0 xffffff7f9e60e000

      dependency: com.apple.driver.AppleBacklightExpert (1.1.0) [C49819CE - 729A - 36B 2 - 9AC1 - 744A43DC23 6F]@0xffffff7fa0a24000

      com.apple.nvidia.classic.NVDAResmanTesla (10.0) [05FC5D7E-BB0B-3232-BBBD-8A49B687 0D8B]@0xffffff7f9e665000-> 0xffffff7f9e8dafff]

      dependency: com.apple.iokit.IOPCIFamily (2.9) [4FE41F9B-2849-322A-BBF8-A94816C003D6] @ 7f9e13d000 0xffffff

      dependency: ffff7f9e655000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [1114B99F-E439-329E-876D-1FEC4CF45DF6]

      dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [172C2960-EDF5-382D-80A5-C13E97D74880] @0 xffffff7f9e60e000

      com.apple.nvidia.classic.NVDANV50HalTesla (10.0) [CA 56199, 6 - 3C8D - 3EBB - B5EF - 7B1B467 8ACF9]@0xffffff7f9e8e5000-> 0xffffff7f9eb92fff]

      dependency: com.apple.nvidia.classic.NVDAResmanTesla (10.0.0) [05FC5D7E-BB0B-3232-BBBD-8A49B6 870D8B]@0xffffff7f9e665000

      dependency: com.apple.iokit.IOPCIFamily (2.9) [4FE41F9B-2849-322A-BBF8-A94816C003D6] @ 7f9e13d000 0xffffff

      com.apple.GeForceTesla (10.0) [01260884-60E9-35E1-A16A-70AE3322356C] @0xffffff7f9f edc000-> 0xffffff7f9ffa7fff

      dependency: com.apple.iokit.IOPCIFamily (2.9) [4FE41F9B-2849-322A-BBF8-A94816C003D6] @ 7f9e13d000 0xffffff

      dependency: ffff7f9e655000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [1114B99F-E439-329E-876D-1FEC4CF45DF6]

      dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [172C2960-EDF5-382D-80A5-C13E97D74880] @0 xffffff7f9e60e000

      dependency: com.apple.nvidia.classic.NVDAResmanTesla (10.0.0) [05FC5D7E-BB0B-3232-BBBD-8A49B6 870D8B]@0xffffff7f9e665000

      Corresponding to the current thread BSD process name: WindowServer

      Mac OS version:

      15E65

      Kernel version:

      15.4.0 Darwin kernel version: Fri Feb 26 22:08:05 PST 2016; root:XNU-3248.40.184~3/RELEASE_X86_64

      Kernel UUID: 4E7B4496-0B81-34E9-97AF-F316103B0839

      Slide kernel: 0x000000001d600000

      Text of core base: 0xffffff801d800000

      Text __HIB base: 0xffffff801d700000

      Name of system model: MacBookPro6, 2 (Mac-F22586C8)

      Availability of the system in nanoseconds: 315642050380

      last load kext to 109875297956: com.sophos.kext.sav 9.4.52 (addr 0xffffff7f9e01b000 size 28672)

      Finally unloaded kext to 201652398117: com.apple.driver.usb.AppleUSBUHCI 1.0.1 (addr 0xffffff7f9ee8d000 size 126976)

      kexts responsible:

      com Sophos.kext.SAV 9.4.52

      com Sophos.nke.SWI 9.4.52

      com.apple.driver.AudioAUUC 1.70

      com.apple.driver.AppleHWSensor 1.9.5d0

      com.apple.driver.AGPM 110.21.18

      com Apple.Driver.pmtelemetry 1

      com.apple.iokit.IOUserEthernet 1.0.1

      com.apple.iokit.IOBluetoothSerialManager 4.4.4f4

      com Apple.filesystems.autofs 3.0

      com.apple.driver.AppleOSXWatchdog 1

      com.apple.driver.AppleMikeyHIDDriver 124

      com.apple.driver.AppleMikeyDriver 274.7

      com.apple.driver.AppleHDA 274.7

      com.apple.driver.AppleUpstreamUserClient 3.6.1

      com.apple.GeForceTesla 10.0.0

      com.apple.driver.AppleIntelHDGraphics 10.0.0

      com.apple.Dont_Steal_Mac_OS_X 7.0.0

      com.apple.driver.AppleSMCPDRC 1.0.0

      com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.4f4

      com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

      com.apple.driver.AppleIntelHDGraphicsFB 10.0.0

      com.apple.driver.AppleSMCLMU 208

      com.apple.driver.AppleHV 1

      com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

      com.apple.driver.AppleMCCSControl 1.2.13

      com.apple.driver.AppleLPC 3.1

      com.apple.driver.AppleMuxControl 3.12.6

      com.apple.driver.SMCMotionSensor 3.0.4d1

      com.apple.driver.AppleUSBTCButtons 245,4

      com.apple.driver.AppleIRController 327,5

      com.apple.driver.AppleUSBCardReader 3.7.1

      com.apple.driver.AppleUSBTCKeyboard 245,4

      com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

      com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

      com.apple.BootCache 38

      com.apple.iokit.SCSITaskUserClient 3.7.7

      2.8.5 com.apple.iokit.IOAHCIBlockStorage

      com.apple.driver.AirPort.Brcm4331 800.20.24

      com.apple.iokit.AppleBCM5701Ethernet 10.2.0

      com.apple.driver.AppleFWOHCI 5.5.2

      com.apple.driver.AppleAHCIPort 3.1.8

      com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

      com.apple.driver.AppleSmartBatteryManager 161.0.0

      com.apple.driver.AppleACPIButtons 4.0

      com.apple.driver.AppleRTC 2.0

      com.apple.driver.AppleHPET 1.8

      com.apple.driver.AppleSMBIOS 2.1

      com.apple.driver.AppleACPIEC 4.0

      com.apple.driver.AppleAPIC 1.7

      com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

      com Apple.NKE.applicationfirewall 163

      com Apple.Security.Quarantine 3

      com.apple.security.TMSafetyNet 8

      com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

      com.apple.AppleGraphicsDeviceControl 3.12.6

      com.apple.iokit.IOSurface 108.2.1

      com.apple.iokit.IOSerialFamily 11

      com Apple.kext.Triggers 1.0

      com.apple.driver.DspFuncLib 274.7

      com.apple.kext.OSvKernDSPLib 525

      com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0

      com.apple.nvidia.classic.NVDAResmanTesla 10.0.0

      com.apple.driver.CoreCaptureResponder 1

      com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.4f4

      com.apple.iokit.IOBluetoothFamily 4.4.4f4

      com.apple.driver.IOPlatformPluginLegacy 1.0.0

      com.apple.iokit.IOFireWireIP 2.2.6

      com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

      com.apple.driver.AppleSMBusController 1.0.14d1

      com.apple.driver.AppleSMBusPCI 1.0.14d1

      com.apple.driver.IOPlatformPluginFamily 6.0.0d7

      com.apple.driver.AppleHDAController 274.7

      com.apple.iokit.IOHDAFamily 274.7

      com.apple.iokit.IOAudioFamily 204.3

      com.apple.vecLib.kext 1.2.0

      com.apple.driver.AppleBacklightExpert 1.1.0

      com.apple.iokit.IONDRVSupport 2.4.1

      com.apple.driver.AppleGraphicsControl 3.12.6

      com.apple.iokit.IOGraphicsFamily 2.4.1

      com.apple.driver.AppleSMC 3.1.9

      com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

      com.apple.iokit.IOUSBMassStorageDriver 1.0.0

      com.apple.driver.AppleUSBMultitouch 250,5

      com.apple.iokit.IOUSBHIDDriver 900.4.1

      com Apple.Driver.USB.cdc 5.0.0

      com.Apple.Driver.USB.Networking 5.0.0

      com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

      com.apple.driver.CoreStorage 517.20.1

      com.apple.driver.usb.AppleUSBHub 1.0.1

      com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

      com.apple.iokit.IOBDStorageFamily 1.8

      com.apple.iokit.IODVDStorageFamily 1.8

      com.apple.iokit.IOCDStorageFamily 1.8

      com.apple.iokit.IOAHCISerialATAPI 2.6.2

      com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

      com.apple.iokit.IOEthernetAVBController 1.0.3b3

      com.apple.iokit.IOFireWireFamily 4.6.0

      com.apple.iokit.IO80211Family 1110.26

      com.apple.driver.mDNSOffloadUserClient 1.0.1b8

      com.apple.iokit.IONetworkingFamily 3.2

      com Apple.Driver.corecapture 1.0.4

      com.apple.iokit.IOAHCIFamily 2.8.1

      com.apple.driver.usb.AppleUSBEHCI 1.0.1

      com.apple.iokit.IOUSBFamily 900.4.1

      com.apple.iokit.IOUSBHostFamily 1.0.1

      com.apple.driver.AppleUSBHostMergeProperties 1.0.1

      com.apple.driver.AppleEFINVRAM 2.0

      com.apple.driver.AppleEFIRuntime 2.0

      com.apple.iokit.IOHIDFamily 2.0.0

      com.apple.iokit.IOSMBusFamily 1.1

      com Apple.Security.sandbox 300.0

      com.apple.kext.AppleMatch 1.0.0d1

      com.apple.driver.AppleKeyStore 2

      com.apple.driver.AppleMobileFileIntegrity 1.0.5

      com.apple.driver.AppleCredentialManager 1.0

      com.apple.driver.DiskImages 417.2

      com.apple.iokit.IOStorageFamily 2.1

      com.apple.iokit.IOReportFamily 31

      com.apple.driver.AppleFDEKeyStore 28.30

      com.apple.driver.AppleACPIPlatform 4.0

      com.apple.iokit.IOPCIFamily 2.9

      com.apple.iokit.IOACPIFamily 1.4

      com.apple.kec.Libm 1

      com Apple.KEC.pthread 1

      com Apple.KEC.corecrypto 1.0

      You have the MacBookPro6, 2 - the Edsel of Mac. There may be the failure of logic-board that was covered by a recall program that is now complete.

      The model was abandoned in February 2011. It is now classified by Apple as a "vintage product." This means that Apple will probably refuse to fix (see exceptions on the linked page.) In this case, you will need to go to an independent service provider. The part can be is no longer available, or the repair may not be profitable.

      Often, the problems start after an upgrade of the OS. If the upgrade has been recently, and you have backups, you can then go back to a previous version of OS X.

      Otherwise, an appointment of 'Genius' in an Apple Store, or switch to a different service provider authorized, to have the tested machine. The trial will be free to an Apple Store - unless Apple refuses to even look at the unit, as it could. Diagnoses of current equipment used by service providers don't detect the fault. There is a specific test for this number called "VST" (for "video system Test.") Ask for it. A "Failed" result means that the defect is present.

      If you decide to go to an independent service provider, be aware that the replacement part may also be faulty. Some owners reported that they went up to three replacement boards before you get one that worked. Don't expect any help from Apple if you have to pay several hundred dollars for an another bad logic board and that the supplier will be replace again.

      If you don't want to take that risk, or if you don't like the price you quoted, you may (or may not) be able to work around the problem by disabling automatic switching graphics. To use the separate graphics processor, you will need a third-party utility to manually switch to him.

    • My iMac just has frozen and then restarted itself?

      Hello

      I just got my iMac freezing screen and then spontaneously stop and get back to work. There was no window of kernel panic or anything. My pointer froze right on the screen, then a few seconds later my iMac restarted itself. I've never had this happen before. Anyone know why? I recently installed 32 GB of RAM - that this has something to do with it?

      Richard

      If it works OK, then it just may be a little problem of memory. Don't forget to fix your hard/SSD to be sure there is no data corruption caused by the abnormal termination.

      Repair the hard drive and permissions - El Capitan

      HD recovery start:

      Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

      Repair

      When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

    • 5 bad iPhone battery and restart itself IOS 9.3 Beta

      Hello, I have a few problems with my iphone 5.

      After I updated ios version Saturday, my iPhone 5 do not update the battery percentage. He remained at the same percentage every day, no matter how much I use and would change only if I would turn off the phone and turn it back on. I did the update and now my phone consantly restarts every two minutes. I can't keep it longer than 5 minutes. Even if I just leave without him doing anything, it restarts itself. I use ios beta version 9.3

      Back to 9.2.1. That's why I don't do any beta test.

    • My Satellite C660-1LD keeps restarting itself

      My Satellite C660-1LD keeps restarting itself. Does anyone know how to stop this?

      Hello

      What exactly happens? Can you please explain what is happening, but more detailed.

    • Apple TV 3 - crashes, restarts, is delayed without reason

      After the update I noticed that our device a1427 began trolling a bit.

      It is now unusable. The device freeze, restart even when I try to go into the settings.

      I did wear it all off the wall thing, tried to use Ethernet instead of wifi etc nothing works. I'm afraid, I have a camera after the update missing (... thanks)

      the use of Netflix and House sharing, with a bit of airtime. If the device is just sitting idle for more than 5 minutes, it restarts itself.

      is this common? Can I fix this thing?

      Thank you

      It's hard to type on an iPad.

      What if test you on another network and TV.

    • Satellite P300-h-13: stops, restarts itself and then freezes in the BIOS

      Hello

      I have a laptop TOSHIBA SATELITE P300-h-13.
      When I turn it on, it starts before blocking immediately down and then it restarts itself (twice).

      Then it freezes in THOSHIBA default start screen.
      I can't access BIOS (says it charges but nothing happens).

      If I press the ESC key, I got a screen saying that the processor is detected and it gives me the ability to L2 cache, it says the RAM passed and then it indicates that the Bios system & video are overshadowed.

      I tried without the battery, but it doesn't change anything.

      Please help me solve this problem on.
      Thank you!

      Hello

      I don't know why this is happening and it's really strange question that should not happen on the new laptop.
      In such situations, you can simply try standard measures and see if it will work properly again.

      By the way: how old is your laptop? Have you noticed this behavior from the first day?

      In any case, try to enter in the BIOS somehow and set it to default settings. try to enter Advanced boot options using F8 at the start and check if the installation of operating system work (during the first backup of data, if possible).

      If nothing helps I would recommend not to do anything, but contact the nearest authorized service provider. Let them check your laptop computer and, if necessary, repair. Warranty will cover all costs.

    • MACBOOK PRO KEEPS RESTARTING ITSELF.

      Hello world!

      Now, I don't know if it's happening because of this macbook was good for me and my aunt (perhaps after a mobile phone rate business here in Australia) brought the laptop is supposed to be refurbished (ect)

      Now it keeps restarting itself which is annoying, because I'm working on it. I clicked open the report and this is what I got:

      Anonymous UUID: 95CFAC8B-1883-70D4-607F-AE56B9B3818D

      Sea 6 Jan 19:45:16 2016

      Panic report *.

      panic (cpu 1 0xffffff8014816df2 appellant): Kernel trap at 0xffffef7f962f7778, type 14 = page fault, registers:

      CR0: 0 X 0000000080010033, CR2: 0XFFFFEF7F962F7778 CR3: 0X000000000A966000 CR4: 0 X 0000000000002660

      RAX: 0XFFFFFF810F0CBAF8, RBX: 0XFFFFFF810F0CBD60 RCX: 0XFFFFFF810F0CBAF0 RDX: 0000000000000008 0 X

      RER: 0XFFFFFF810F0CBAD8, RBP: 0XFFFFFF810F0CBB60, IHR: 0 X 0000000000000001, RDI: 0XFFFFFF80DF2C4000

      R8: 0XFFFFFF810F0CBAF4, R9: 0XFFFFFF810F0CBAF8, R10: 0XFFFFEF7F962F7778 R11: 0000000000000000 0 X

      A12: 0 X 0000000000000002, R13: 0XFFFFFF80DF2C4000, R14: 0XFFFFFF7F96379250 R15: 0XFFFFFF810F0CBC30

      RFL: 0 X 0000000000010202, RIP: 0XFFFFEF7F962F7778, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010

      Lack of CR2: 0xffffef7f962f7778, error code: 0 x 0000000000000010, CPU error: 0 x 1

      Backtrace (CPU 1), frame: return address

      0xffffff810f0cb780: 0xffffff801472ad21

      0xffffff810f0cb800: 0xffffff8014816df2

      0xffffff810f0cb9c0: 0xffffff8014833ca3

      0xffffff810f0cb9e0: 0xffffef7f962f7778

      0xffffff810f0cbb60: 0xffffff8014d01523

      0xffffff810f0cbbc0: 0xffffff8014cfed83

      0xffffff810f0cbd00: 0xffffff80147e1307

      0xffffff810f0cbe10: 0xffffff801472ef8c

      0xffffff810f0cbe40: 0xffffff80147139f3

      0xffffff810f0cbe90: 0xffffff801472429d

      0xffffff810f0cbf10: 0xffffff801480231a

      0xffffff810f0cbfb0: 0xffffff80148344c6

      Corresponding to the current thread BSD process name: WindowServer

      Mac OS version:

      14F27

      Kernel version:

      14.5.0 Darwin kernel version: Wed Jul 29 02:26:53 PDT 2015; root:XNU-2782.40.9~1/RELEASE_X86_64

      Kernel UUID: 58F06365-45C7-3CA7-B80D-173AFD1A03C4

      Slide kernel: 0 x 0000000014400000

      Text of core base: 0xffffff8014600000

      Text __HIB base: 0xffffff8014500000

      Name of system model: MacBookPro5, 5 (Mac-F2268AC8)

      Availability of the system in nanoseconds: 10

      Model: MacBookPro5, 5, MBP55.00AC.B03 of BootROM, 2 processors, Intel Core 2 Duo 2.53 GHz, 8 GB, MSC 1.47f2

      Graphics card: NVIDIA GeForce 9400 M, NVIDIA GeForce 9400 M, PCI, 256 MB

      Memory module: DIMM0/0 BANK, 4 GB DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020

      Memory module: DIMM0/1 BANK, 4 GB DDR3, 1333 MHz, 0x802C, 0x31364A54463531323634485A2D3147344D31

      Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.24)

      Bluetooth: Version 4.3.6f3 16238, 3 services, 27 aircraft, 1 incoming serial ports

      Network service: Wi - Fi, AirPort, en1

      Serial ATA Device: KINGSTON SV300S37A240G, 240,06 GB

      Serial ATA Device: HL-DT-ST DVD - RW GS23N

      USB device: ISight built-in

      USB device: Memory card reader internal

      USB device: Apple keyboard / Trackpad

      USB Device: IR receiver

      USB device: Hub BRCM2046

      USB Device: USB Bluetooth host controller

      Crush Bus:

      Refurbished Mac Apple is also covered under a 1 year warranty.  Call Apple technical support.

    • Re: Somehow my Satellite L650 - 1 K 5 restarts itself

      Hello everyone!

      I have a big problem!
      I bought a Satellite L650 - 1 k 5 2 weeks. I have Windows 7 Professional x 64 is installed.
      The problem is that, somehow, it restarts itself. When starting, he asks a windows bootable disk to restore the system. I tried, it didn't, displays an error.

      I tried to reinstall Windows many times, even installed the x 86 version of Home Premium, same problem.
      Help, please!

      Stand by.

      You created the recovery DVDs?
      You can install original Win7 using this disc?
      You can use preinstalled recovery image?

    • Crash &amp; restart (includes Specs)

      Hello

      Here are my following features:

      • MacBook Pro (15-inch, 2.53 GHz, mid 2009)
      • 2.53 GHz Intel Core 2 Duo processor
      • Memory 8 GB 1067 MHz DDR3
      • NVIDIA GeForce 9400 M 256 MB graphics card
      • Storage capacity 500 GB

      After the upgrade to El Capitan. My laptop has been crashing & restart. I replaced my optical drive & increased RAM in the past (a year ago) and has been working perfectly fine until I updated to El Capitan.

      Help, please.

      Thanks in advance.

      Please go to http://www.etresoft.com/etrecheck , download and run EtreCheck, copy paste here the status report.  She will show us what is currently on your system, and if there is anything causing the crashes you are experiencing, we will see and hopefully be able to advise you on how to resolve this.

    • Help! W500 dead. Is update system, restarted itself, makes 3 loud beeps and thats all!

      I just changed my hard drive, stuck in a windows 7 cd, successfully installed. Chrome, dropbox and update system installed. Ran Lenovo update system and at one point the computer restarted itself, made three loud beeps (long followed by two short) and that's it.

      The bluetooth led is on, as it is powered, battery and charger lamps. The screen is dead.

      That's happened? What are these three beeps? What should I do?

      It turns out that my new HDD is loose. Something must be done to ensure that it does not move.

      It was a scary time.

    • My computer guard restarting itself over and over after windows xp screens.

      My computer guard restarting itself over and over after windows xp screens. He did the same when I try to put it in safe mode. Is it that I can do to get at least pass this screen?

      Kheta salvation,

      1. Did you the latest changes on the computer?
      2. You receive an error message?
      3. When was the last time it was working fine?

      Start the computer by using the option disable automatic system error reboot and check if you receive the error message, and post back with the details.

      1. Restart the computer.
      2. As the computer restarts, press the F8 key repeatedly until you see the Windows Advanced Options screen.
      3. Use the arrow keys to select disable automatic system error reboot and press ENTER.

      If you do not receive the windows logon screen, then refer to the article below and try the steps mentioned.

      Windows XP logon screen does not appear and the computer continuously restarts

      http://support.Microsoft.com/kb/310396

    • Help! My A1-811 keep restart itself

      I need help! Ajter try to update to KitKat 4.4.2 manually using this article http://acer.custhelp.com/app/answers/detail/a_id/29931#_ga=1.159508285.1207883840.1437316707 my compressed get reboot forever. I did everything also, I downloaded the PDF of drivers and manuals Section and did exactly what he said, but the update will not install, just the image with the fallen Android and some information such as that in the manual. So after that I just pressed restart system and... nothing. It keeps restarting itself. Help me is it possible to fix it?

      PS: In the section drivers and manual there are two files for the different image files. I get the WW_GEN, because before trying to update, I checked the last image in my settings, and it was ending with WW_GEN.

      Good news! Today, I bring my tablet of service and it works with KitKat 4.4.2. But IronFly I have question for you. You said that the first time that I connect my Google account it automatically detects the applications installed in the front, but he didn't do it. I'm going to Google game store, and he wasn't the applications and games that has been installed on my front tray. Why?

      EDIT: Oops, does not check in the sections "All". Sorry now everything is fine as before. Apps and games backup is saved and I can't countinue where I was arrested

      But still, after all that I spent, it was terrible. Acer should do a video how update manually, I did everything as it says in the article! Maybe I should post this in the suggestions subforum?

    • Browser crash, restart on its own, can not do the system restore. Help!

      OK, so I tried EVERYTHING I know how to do, and some things I did research.

      Whenever my computer restarts itself, I get an error message saying that there is a faulty driver.

      I checked my drivers with the audit tool, nothing.

      I uninstalled all unnecessary programs I could find (nothing critical, just programs like Glary Utilities, Acrobat, Flash etc..).

      Eventually I got to a point where everything I did was to get worse, and my computer told me that Windows did not start upward.  I rebooted in safe mode and tried to do a system restore.  Cannot restore point to restore I get an error indicating that the system restore was not successful.  I tried FOUR different restore points.

      I'm at my wits end!

      I don't have my Windows XP cd, or one of the disks with the computer came.  This used to be my computer at work, but let me keep as part of my departure, so all the disks are in the old company.

      Please help :(

      Computer: Dell
      Intel Core 2 Duo 2 G of RAM, Windows XP Professional

      (For some reason, the police in your post is a very light gray!)

      Please transmit the full text of the error message.

      You used the phrase "everything I've done." In addition to uninstall unused programs, what else do you have?

      If your company gave you this PC, they should have you good discs too. Fortunately, Dell XP Pro installation CD are ubiquitous and interchangeable. First of all, contact Dell to see if they can issue you a. Otherwise, see if anyone you know has one.

      A number of security (for example, Norton and Zone Alarm) programs interfere with the restoration of the system. If you identify your security programs, we can tell you how you can get the system restore to work. For now, these pages can help:

      http://bertk.MVPs.org/html/srfail.html

      http://bertk.MVPs.org/html/symantecdoc1.html

      You should be able to disable your restarts automatically in this way:

      http://pcsupport.about.com/od/tipstricks/HT/disautorestart.htm

      Finally, what is the status of this PC malware?

    Maybe you are looking for

    • DVR HDD does not work under Vista, but in XP

      How can I get Vista to use / play my DVR HDD...It works on XP but not on Vista.

    • fake email appears to come from my contact, but it is not

      fake email appears to come from my contact, but it is not.  the message reads, "I'm stuck in Europe, just reply to this email, so I can tell you where send me $2500..

    • Error: "firewall Windows is not activated.

      Original title: WINDOWS firewall PROBLEM I have a windows security alert indicating that my windows firewall is not turned on. He was on and working for years. Why would he now turned off. When I try to put on thanks to the control panal, I can not a

    • Problems of extracting .zip files

      I am not able to unzip a zip file.  I tried using the "right click; Extract all' and also tried "Drag and drop" the files compressed separately off the compressed xxx.zip file/folder, like the MS HELP says to do, but neither work.  There is no error

    • 6700: duplex - copy documents one side of the ADF

      Hello! I am interesting in buying a printer HP Officejet 6700 Premium. first of all, I understand perfectly that the ADF is not duplex. But, is it possible to print documents duplex ADF? i.e. first copies of documents on the side of page 1A, second d