Create a desktop shortcut to open the (subway) start?

Similar Questions

• All my desktop shortcuts all open the tray of D:\Recycle...

  When I start first to the top of my Windows 7 PC, all desktop shortcuts open the Recycle Bin. The Recycle Bin properties indicate that it belongs to the partition D:\.
  Other symptoms include trouble scrolling through emails and other lists (drag bar goes to the last point and won't set).
  I tried a lot of bugs (sfc, startup fill twice reinstall Windows 7 and uninstalled all unused programs.) I ran CCleaner and other Reg cleaners. Nothing seems to help.
  After 2-3 minutes, however, the shortcuts behave normally and the scroll function returns to normal.
  What process is active during the first 2 to 3 minutes and then closes?

  One for the record books!
  I found the cause of the wacky desktop shortcuts and it was so simple, I was almost too embarrassed to report it. I mentioned that any vertical scrolling page would always go to the bottom and do not stay anywhere else. In addition, by clicking a shortcut on the office always open the Recycle Bin.

  Well, I found that I could "fix" the problem simply by pressing the Page Up once. All symptoms cleared immediately. Have you guessed yet?

  The Page down key was stuck!

  Well, I get a fresh install of Win7 and clean a lot of junk out of my PC, so it's not a total waste of time (close, but not quite).

  Thanks to everyone who tried to help me. Your talents and your efforts have taught me a lot about Windows I would not have learned otherwise.

• create a keyboard shortcut to eject the CD

  How can I create a keyboard shortcut for windows 7.

  Often the mechanical button on the CD eject not CD. I want to create a keyboard shortcut to open the CD.

  How can I customize keyboard shortcuts in Windows 7? I am able to do this on my work computer that runs XP.

  Shortcuts keyboard and variety or parts of these words are not yet looking for control panel.

  I found the device (keyboard) and attempted to find a box customize under properties. Nope

  I found the list of hotkeys but online there is no shortcut to eject CD.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Help and Support search on W7 Home Premium machine produced this, it refers to the programs, but it is all that can be found.

  Create keyboard shortcuts to open programs

  You can create keyboard shortcuts to open programs. Programs opening in this way is often simpler than opening using your mouse or other pointing device. Before you begin, you must create shortcuts for the program that you want to assign a keyboard shortcut. To do this, open the folder that contains the program, right click on the program file ' sexecutable and then click on create a shortcut. For more information about creating shortcuts to programs, seeCreate or remove a shortcut.

  1. Locate the shortcut to the program you want to create a keyboard shortcut.

  2. Right click on the shortcut and then click Properties.

  3. In the properties of the shortcut dialog box, click the shortcut tab.

  4. Click in the shortcut key box, press the key on your keyboard that you want to use in combination with Ctrl + Alt (keyboard shortcuts begin with Ctrl + Alt), and then click OK.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

     You can now use this keyboard shortcut to open the program.

  Notes

  • The word that doesn't appear in the box shortcut key until you press a key; then it is replaced withCtrl + Alt + the key that you pressed.

  • The new shortcut may not work for programs that have their own keyboard shortcuts.

  • You can not use the ESC, enter, Tab, space,. print screen, shift, or Backspace to create a keyboard shortcut.

  • You can also create keyboard shortcuts to open files and folders.

  HTH

  If I brought you joy, vote! If I answered your question, click, propose as answer! > WT

• Y at - it a keyboard shortcut to open the Panel layers?

  I Googled, searched discussions and tried actions registration but have not found the solution.

  What I would like is a simple keyboard shortcut to open the Panel layers.

  That's all.

  I can create and perform actions which create, delete or move channels; Use the menu tab or channels to open it - but I can't seem to find a way to use a key combination to open the Panel layers as you can do for the layers (F7) or actions (F9) boards.

  Someone has an idea?

  Thank you!

  -Bonnie

  You can assign a shortcut using Edit > keyboard shortcuts > application menu >

  Window > channels.

  MTSTUNER

• As soon as I opened the Firefox Start Page, all my favorites have been posted on the left side. I accidentally hit something, and now all my favorites have disappeared. Help.

  As soon as I opened the Firefox Start Page, all my favorites have been posted on the left side. I accidentally hit something, and now all my favorites have disappeared.

  For your safety, you must do a lot of software updates. You may be holding back for some reason any. Let us know what it is because there may be a fix or workaround now.

  To update to the 19 of Firefox, you can use the "Check for updates" button here:

  Menu help > about Firefox

  To update your Adobe PDF and Shockwave Flash plugins and check for other obsolete plugins, you can use this page:

  https://www.Mozilla.org/en-us/pluginCheck/

  I know it's tedious, but don't let slip too long or you might get up to have to rebuild everything (the curse of your lack of backups, and if you do regular backups).

• Dear Sir, I just downloaded the photoshop cc 2015 and I bought it... when I try to open the icon starts to jump and then it disappears and I can't go through the application

  Dear Sirs,

  Nice day

  I just downloaded photoshop cc 2015 and I bought it... when I try to open the icon starts to jump and then it disappears and I can't go through the application.

  Please help me as soon as possible

  Kind regards

  Hi ehabm46407682

  You see the splash Screen When you open Photoshop CC 2015. It looks like this

  

  Otherwise, try the steps mentioned below

  • With all the Adobe apps closed off creative Application of cloud and sign sign check connect and disconnect activate Cloud Creative applications
  • Try to reset the Photoshop preferences (we assume that you are using a MAC computer)

  Hold down Command-Option-shift keys at Photoshop startup, and then click Yes on the Prompt.Refer using Photoshop | Preferences

  Let us know if this helps

  ~ Assani

• How to create a desktop shortcut icon for sites that I use a lot

  until I started using firefox, I used to be able to right-click on any site I used and the possibility of creating a desktop for a firefox shortcut icon does not seem to allow this am - I missed something else I can try-i find it very useful shortcut icons

  Hi mary1745watson,

  Take a look at the article create a shortcut on the desktop to a Web site. It's a fairly simple process.

  Hope this helps!

• When I click on my desktop shortcut icons in the new firefox 4 I get a dialog box that indicates that windows does not find that the website

  I have improved the previous version of firefox to the new firefox v.4 and now all the shortcut icons I used with the previous version display a pop-up dialog box that says that windows does not find this website, check the spelling - address - etc. But immediately after this window opens the Web site loads. I tried to load the original site, delete the old shortcut and drag the new shortcut to my desktop, but Firefox always gives me the same message.

  See:

  • http://KB.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

• Creating recovery discs - "unable to open the following file" error "

  Hello all,.

  I'm trying to create a set of recovery disc for a customer * Satellite L300 - PSLB8A-07U004 *.

  While the application opens and begins the creation of the disk set, there, three times now, failed to with the error message of * 'cannot open the following file. D:\ ! "V5_01_07.VRP (error Code: 020123-F1-00000000). *

  I tried the first time in this process while all customer data were always loaded.
  I have now done a "restoration"out of box experience"because I thought that one of these files may be the cause, but, alas, the mistake was repeated."
  Of course, it's irritating (to say the least).

  I did NOT any changes to the layout or resizing of partitions. »

  Any thoughts?

  rampant_rhino

  Stand by. If I understand you well you CAN restore the operating system using F8, but you CAN create DVDs using "Toshiba Recovery Disc Creator' of recovery.

  Am I right about that?

• Cannot create document empty when you open the label printer software

  I installed the software to store 8 labels intermec for my label INTERMEC PF8t printer, when I try to open the message cannot create an empty document when you open the printer software labels appear. Help, please

  Hi Phaphama,

  ·         Did you do changes on the computer before the show?

  ·         He has already worked on the computer?

  Follow these methods.

  Method 1: Uninstall and reinstall the software and check if it works very well.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  If the problem still persists, contact the manufacturer for more help and information.

  http://community.Intermec.com/Intr/

  http://www.Intermec.com/support/index.aspx

  http://www.Intermec.com/products/pswlblshop/index.aspx

• Program on the desktop shortcuts have changed the icon in Solution Explorer.

  He's in my top of office program shortcuts changed to Solution Explorer icon. If you click any shortcut ikon is involved in a download window instead of opening the target program

  He's in my top of office program shortcuts changed to Solution Explorer icon. If you click any shortcut ikon is involved in a download window instead of opening the target program

  Use this method

  Restore the file type associations

  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  Scroll down to exe - executable application files.
  Click on the exe

  Follow the instructions in #1 à #7 at the top.

  Scroll to lnk - shortcut link (LNK) files.
  Click on lnk

  Follow the instructions in #1 à #7 at the top.

  If the above method works, but the look still icons like icon in the Solution Explorer, and then do a reconstruction of icon hidden.

  http://www.Vistax64.com/tutorials/117229-icon-cache-rebuild.html

• Shortcut to open the Internet browser

  Hello

  y at - it a shortcut to open internet Explorer?

  in this case, chrome is the default browser instead of IE, is shortened as well.

  Thank you

  Try this:

  Find and right-click on Internet Explorer in your menu, click Properties, click the [shortcut] tab.

  Select the field "shortcut key" press a letter on the keyboard you want allocated, say 'I '.

  Click on and

  Now [Ctrl] + [Alt] + [I] all pressed together should open IE (hope it ;-)) )

  I hope this will work and you can assign 'C' to Chrome maybe?

• Desktop shortcuts move at the start of each day

  When I start my PC every day the desktop shortcut moved around, can someone help me understand this issue?  I am on Windows 7
  I'd appreciate any help.

  Using multiple monitors by chance?  If so, this may surface this behavior.  If not, right click on your desktop and point of view.  From there, the options of the United Nations brand the "auto arrange" as the case may be.

• Icons/programs on the desktop will not open the actual program

  Whenever I click on an icon/program such as Internet explorer in my desktop, it automatically opens windows media center!  Each program, on that I click open windows media center!  How can I fix?

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• Shortcut to open the images in InDesign

  The shortcut to open an image in InDesign is Command-Option-double clickk. works well - except when you click on in the box of overlay in the text block or an underlying. Then the image will not open, even if it was previously selected and shows the blue handles and you double-click inside these blue handles. No matter if the image is in front of or behind another frame, priority is given in the text frame. What happens is: the text block editing window opens.

  Is it possible to have a keyboard shortcut, so that when you select a picture and then make some strikes, the image opens?

  Edit > keyboard shortcuts...

  The original edition... command is under the Edition Menu product area and has no default, but you can add your own. You will need to do a new custom set because you cannot change the default value.