create a digital identity and signature certificates approved as well as creation and appearance preferences.

Similar Questions

• I installed the two DOWNLOAD HELPER & YOUTUBE VIDEO AND AUDIO DOWNLOAD (they are identical) and appear as an icon or appear on the window of the YOUTUBE video.

  I pulled out and in firefox several times and also rebooted. Still no icons for the downloader (s). When I find a video on Youtube and start playing, I still see no way to summon either YOUTUBE VIDEO & AUDIO DOWNLOADER or DOWNLOAD HELPER (are they the same add-on?). I also went in the Firefox Options to see if certain configuration prevents these work packages; saw nothing of use.
  Add-ons translator and screenshots of Nimbus - offered in the same e-mail of Mozilla as additional modules for the Downloader - installed with no problem and their icons appear on the masthead.
  Thanks in advance for your ideas

  The two managers are registered and active. Are their icons on any of the
  toolbars?

  Type of topic: customization< enter > in the address bar.
  In the new window, look for the icon. When you find it, press and hold
  the left button on it and move it to where you want it to be.
  You can move the icons you want here, but
  some icons are locked in place.

  Type of topic: addons< enter > in the address bar to open your add-ons Manager.
  Access key; < Control >(Mac: < command >)< shift > has)

  Select Extensions, locate the Add-ons. Press the Options
  push button for each one and check the settings.

• How do you create field based on signature certificates where you can add a digital signature to the ID?

  During the preparation of a form, it seems that if the field name includes the word "signature", a signature by certificate field is created. If the word "signature" is not present an ordinary field is added which can be signed using fill and sign. I need to know how to create a signature by certificate field (if none is not automatically created) so that the digital IDs can be used to sign the document.

  You can manually add any type of field you want in the form of edit mode. Different field tools are in the toolbar at the top. One of them is the digital signature field tool.

• Acrobat Pro DC - failed to create the digital signature field

  Hello:

  I use a trial version of Acrobat Pro DC and PREPARATION of a form to an existing PDF document. I can't find a way to create a digital signature field that can be "click (to sign).

  Note: The existing .pdf has a digital signature field works but when I click on 'Prepare the form' and select this shape, it blocks every time Adobe Acrobat Pro. I must change the .pdf first, delete the existing digital signature field, save the .pdf, then on 'Prepare the form' and select it with the required signature checked.

  I read several articles in the knowledge base and tutorials that refer to an icon in the toolbar of the digital signature, but I have not this icon can be selected. That's what I see:

  

  When I select the available signature icon (envelope with x) this simply creates a text field, that when the document is opened in Adobe Reader, this field disappears when you click it.

  

  I tried with Adobe Acrobat Pro on Windows 7 as well as currently on Mac OS 10.10.5 (Yosemite). Help to solve this problem would be greatly appreciated.

  Thank you

  The problem is that you have selected the signing required check box. When you do this, it limits you to a form that is compatible with Adobe sign, which allows no digital signature fields. What you can do is to click on the more button in the right panel and select "Back to the form of Acrobat" and you will be able to add digital signature fields.

• Cannot get the digital signature that is added through the creation and the apparitions to be displayed in the list when you try to sign and certify

  I added a signature that appears under Appearance tab Creation and appearance of preference, but when I go to sign and certify a document, I can only find the digital ID created by guests when you try to sign a document. How can I find the signature I want under "appearances" and place it where it can be used to sign a document.

  Choose the appearance in the sign dialog box:

  

• 2 questions: menu discovered and digitally signing with root certificate is incomplete

  How to discover the menu bar (file, publishing, display,...), covered by the menu bar (home, tools,...) in Acrobat Reader ms?

  My other question concerns the root CA certificates: when I upgraded the form XI Acrobat Reader Acrobat Reader DC that I digitally sign including the certificate it displays more of my ID under the timestamp and digital signature, what can I do?

  If you are using Windows, try if F9 bring the menu bar back.

• Create a digital signature

  How to create a digital signature using Adobe Reader?

  You must have an extended version read the PDF file including the existing signature field to create free signature using Adobe Reader. Please see the attached file.

  ~ Deepak

• How to create a digital control (of any type) which can be increased or decreased by a 'unit' at the same time?

  As in the title.  I want to create a digital control (no current limitation on its type) with a range of 1 to 10 (and a step of 1).  The only difficulty that I have, is that the user should only be able to increase or decrease 1 at any time.  Code initiated by this change of value must have completed at least once before that the value can be changed again.  This is because code of VI is mainly contained in a while loop and control are read once at each iteration and its last value should not differ more than 1.

  Is this possible with LabVIEW 6.1 and if so, how?

  One of the solutions that I came up with so far is to disable the control immediately after its reading, and to turn it on again immediately seized is read the next time (I have to assume that the user is unable to click twice before the control is disabled).  It is an acceptable method, or is there a better way?

  I also had an idea of partially disable a normal digital control, such that it could not be typed in - only arrows remained operational.  However, I'm not sure how.

  James

  Hi James,

  You can use the two buttons (by releasing latch) and a digital display that shows the current value. Button increased the value and the other decreases. Store the value in a shiftregister to work with her.

  I don't know if your solution would work because use may directly enter the new value.

  It will be useful.

  Mike

• Substitution of the class, how to create the child class and then the base class

  I started to write a program for a DMM smart, that the problem is all versions of DMM greet the change company communication.

  My idea is to write a child class for each version, DMM and each Subvi child will replace the Subvi base class.

  My problem is, I first want to create a child class and after I see everything is working, start creating the base class. in this way, I'll see if think the right way.

  My question is

  How can I create a child class and then create the base class and configure the Subvi class of the child to be the substitution of the base class?

  I tried searching in the property of the class, but I don't see anything.

  Thank you

  This can be done and I did on occasion.

  You create the base class with the methods of dynamic distribution, you need (Connector components must be identical to those of the class of the child).

  Set then the legacy of the class inherits this base class.  If your method is defined as a dynamic distribution method in the parent, you will probably now have some errors (unless your method of child was already DD, in which case you might be OK already).

  To change the inheritance of a class, right-click on the properties of the class in your project, and then select Properties.  According to me, the tree of estate is at the lower end of the property.  Click on the 'legacy of change' (or something similar) to choose the class from which you now want to inherit.

• Can I create a digital line written task in another digital line written task (NOR-6723)?

  Hello! I need to build an application that follows these steps in the order shown:

  1. create a task that writes a numeric value ('1 ' or ' 0') on line1 digital to a NOR-6723;

  2. create a task that generates a clock on the same Board $line0 pulse. So, when the value of the line of $line0 has been set, a transition from '0' to '1', and then '1' back to '0' must be made on the $line0.

  So, I have the following pseudocode:

  1. create Task1

  2. create digital output channel ' Dev1/port0/line1.

  3. write bits of data ('0 ' or ' 1') on digital line1

  4. stop & erase Task1

  5. create Task2

  6. create the digital output channel ' Dev1/port0/$line0.

  7 write bit '0' on digital $line0 data

  8 write '1' on digital $line0 bit data

  9. write the data bit '0' on digital $line0

  10 stop & erase Task2

  After I stop & erase Task1 (step 4), the digital line1 remains in the State that gave step 3. But, once I created a digital channel for $line0 (step 6), line 1 is in the State of initialization (high State - because of the low pull-up), so when Task2 generates the clock on $line0 pulses, the data written bit on line1 is compromised (it will always be '1').

  My question: should I move 4 step after step 10? I mean stopping and disabling Task1 bring Task2 AFTER WHAT had been arrested and cleared?

  Is that what this ensures that value of Line1 remains unchanged until the end of the entire application (once Task2 completed)?

  Please help me!

  OK, don't know the exact calls in labwindows, is perhaps the easiest thing to create a taste of writing on the complete port.

  In this case you write every line for 8 lines of the digital port at the same time.

  Use is some form of a variable (U8) and associated function which can hide and update the bits in a number of U8

  I guess that there is a form any to make an OR operation bitwise or function AND to hide the bits of interest

  1 Create variable (U8) = b0000000

  2. create Task1

  3. create a digital output PORT ' Dev1/port0.

  Update 4 line 1 by 1 in the variable: 00000010 (this should be a routine you create - see crude example below)

  5. write variable to Dev1/port0

  Update 6 line 0 with 1 in variable: 00000011

  7 write variable to Dev1/port0

  Update 8 line 0 0 in variable: 00000010

  9 write variable Dev1/port0

  10 stop & erase Task1

  Function UpdateVariable (line; variable value)

  If line = 0 then

  If value = 0 then

  variable = variable AND b11111110

  on the other

  variable = variable OR b00000001

  otherwise if line = 1

  If value = 0 then

  variable = variable AND b11111101

  on the other

  variable = variable OR b00000010

  Hope that helps

  Katya

• MyDAQ - generation of a digital signal and display on an analog waveform graph

  Hello

  I use the MyDAQ OR generate a digital waveform with a Frequency adjustable. This is implemented in a program, I already wrote it, which generates a TTL 'like' impulse out of the sound card. I display the result on a graph of analog wave form, and I would like to be able to display the digital signals generated by the myDAQ on the same graph. (Not in the same time, one or the other, activated by a button). I've been messing around with tables and conversions, but I can't really do with all this.

  It's the vi, I did to generate the digital signal of frequency with MyDAQ. Any suggestions on how to do this if the following is false, would be great too, as I just got the MyDAQ a few days ago. I think there must be a better way, but it's the best I could come up with so far.

  

  Hi Jonny,

  The General logic, that you use to create a digital pulse train is very good. This VI you wrote should work and create the pulse train based on timing of software (which is fine because you have not DIO clocked by the material on the myDAQ anyway). However, it is generally advised to start the DAQmx task just before your time loop and then disable the task after the while loop when you press stop.

  For reference, there are a few examples of good enough LV that I recommend you watch too much for this application. If you try just to create a digital pulse train, the example Gen dig Pulse Train - Continuous.vi is a good example that uses a counter to create a digital pulse of your desired frequency train. It is generally the preferred method to create a pulse train, if you have equipment available to do (the myDAQ there a meter). Otherwise, there are a few examples DIO who write continuously in a digital line / port.

  If you are unfamiliar, you can find the examples by clicking Help > examples find... into LV then navigate to hardware input and output > DAQmx > generating digital impulses or the digital generation.

  Also, here is some additional information on the myDAQ and its counters:

  myDAQ counters

  myDAQ manual

  Hope this helps.

  Chris G

• 2012R2 creating a Collection server and adding RDSH completed with errors

  I'm working on the construction of a farm of RDS 2012R2 to be used by thin clients to my installation. I have a farm complete 2008R2 already working and I'm looking to upgrade. Currently, I have 2-2012R2 servers rose with RDS services installed. I assigned Server 1 as the agent of connection and the Desktop Web access server remotely. Server 2 is configured as host of the session. The installation of all the roles of RDS was successful. I configured the gateway desktop remotely, RD, RD Web Access licenses and certificates on my RD connection Broker.

  Initially, I tried to create a collection while the two servers were in my terminal server OR. After many attempts to try to create a session and a lot of research, I found that the GPO settings for RDS servers should be irreversible in order to create a collection with a host of the session. I moved the two servers to a political ORGANIZATION unit block I put in place. I ran a gpupdate/force and restarted both servers. In addition to this, I waited a few hours to ensure that policies no longer apply. I tried to create a collection again and received the same error when it was adding the session host server"SERVER 2 failed to configure the Server Desktop Session host Server 2 remotely. Invalid operation. "I ran a gpupdate/force a few times and tried to create a collection of more than a few times without success. Finally, I deleted all the two servers RDS servers and then reinstalled again. After having everything set up (bridge, Broker for connections, licenses, certificates etc), I try to create a collection again and am greeted with the same error.

  I know that the GPO settings have been deleted because I no longer see the banner of society that is displayed when you log on the server. There are 0 policies applied to this ORGANIZATION and the legacy unit is blocked. I'm not really sure of who apply now. I hope that someone else has experienced this problem and can help you. Thank you

  J

  Hello

  Your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forums.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking

  TechNet is watched by other computing professionals who would be more likely to help you.

  Thank you

• How to create a link in my signature in Windows Live Mail for Windows 7?

  I used to use Outlook Express, and when I put a link in my signature in Outlook Express, it automatically creates a hyperlink so that my clients can easily access my site, but I am now using Windows Live Mail, and I was never able to find a way to create a link in my signature.

  I put my website address in my signature, but when I send a mail to answer, it will only turn it into a link if I click at the end of my website address and then press ENTER to go down as I begin a new paragraph. When I do that, it changes the address a link, but it's a real hassle of having to do every time I send a response. I tried to do the same thing in my signature, but it does not work.

  Did someone knows a way to make it a link in my signature?

  Under the Signature settings in the options, you can use a plain text signature that has no connection, or you can use the 'file' option to define an HTML file containing the code for a signature with a link.

  For example, save it as a sig.html notebook file (instead of the economy as a normality. txt file) and use it in the options.

  Roxanne
  example.com

  This will produce a signature that looks like this:

  Roxanne
  example.com

• When installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system?

  Have a Dell system, caught a virus and it has really messed up the PC. Recently, it got worse so I tried to reinstall the operating system with the Dell disks. It wouldn't work. So I bought for Windows 7 Professional, it will not be installed. My first question when installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system? Because this does the same as the Dell disks, is to take what is on the hard drive and put it in a folder called windows old, is not formatting the HD. When I boot the disk, it shows the installation of files then open windows and start the installation. Before he could finish I get an error missing or corrupted files. Tried several times now, windows will still not open. Any suggestions? Once while trying to install the pc crashed with a blue screen which is one of the reasons why I have reinstall the OS, he started to plant a few times. I don't remember all the details on my PC, but its 4 years, triple core coprocessors, ram 8 GB, 500 GB HD. At the same time just after all this started in Jan. I had also improved my 3 GB to 8 GB memory. I bought the Dell memory for my system. Since the crash, could there be a problem with these new memory chips? Last night I tried to disassemble each and reinstalling it, but that doesn't seem to make a difference. Before I tried to reinstall the operating system, the pc was see the concert 8.

  Original title: used to install Windows 7

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Also check Home Edition free Partition Wizard option "Test of disc surface":
  http://www.partitionwizard.com/free-partition-manager.html

  J W Stuart: http://www.pagestart.com

• Creating a digital magazine

  Hi all

  I am a teacher and graphic designer and I'm wanting to venture into something new, I've never done before.  I want to create a digital magazine tablet/smart phone users can slide per page per page (each page another image PNG or JPG) and be able to sell the mag subscriptions to end-users.  Is there a simple way to cluster/group all the images together so that the user Android or Apple can slip through all the pages from page 1 to the end?  (similar to the way in which we move from one peak to another in their photo gallery). That require third-party software script or a 3rd?  Any help is appreciated.

  Thank you

  Joel Miller

  Photoshop can also create galleries of Web photos with a good script and if you download the optional output of the bridge module you can create PDF and web photo galleries.  Photoshop can also save PDF presentations.  I use Lightroom, but its output module can also have features you can use.