create a new user in presentation Services

Similar Questions

• I can't create a new user account (Windows 7): the user profile service service has no logon

  I tried to create a new user account, but I get the following error when I try to open a session with him:

  the user profile service service has no logon

  Until I leave than anything more I will add that I activated the hidden administrator account and this is the account I use to create a new standard user account.

  Most of the patches for this issue are due to the fact that delete manually a user account does not remove the registry key that are associated, and you are required to go to the next section of the registry:

  HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\WINDOWS NT\CURRENTVERSION\PROFILELIST

  and delete the key associated with the user account to be deleted.

  This fix IS NOT help, because whenever I try to create a new user, Windows doesn't bother creating a registry key to the new user.  The new user account appears in the account management window.  If I right click ondesktop and select Properties, then the settings , select the Advanced tab and click settingsunder USER PROFILES, the new account appears not here no more.

  It is a huge problem.  I have other people who use this laptop and I don't want to use my login information, or the guest account.  I'm not editing the registry just to make a new account.

  Please tell me there is a fix for this that works.  Windows 7 was not free, and this kind of problem is very frustrating for the premium software.

  Thanks - this is the only tip that help me to find the solution to this problem.

  Two files in the folder C:\Users\Default\AppData\Local\Microsoft\Windows Live could not be copied without administrator privileges.  This caused the connection in the attempt fail for all newly created user accounts.  The files are:

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm

  and

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm

  I've added the read permission for all users in these two files and retried the logon.  The opening of session proceeded set up initial user and filled perfectly.  Probably, this problem started when I installed Windows Live Messenger which is the only Windows Live application, I installed.

  Other important in your message board was to check the event log which stressed the two files which could not copy.  Otherwise provided in WARNING messages immediately preceded files event log error message indicates that the profile service could not connect.

• Cannot create a new user account, the user profile service service does not log and cannot install a program

  I can't create a new user account (Windows 7): the user profile service service has no logon.

  I have an administrative account which is the only account. I have problems with the installation of Autodesk Inventor so I need to create another user to see if I can solve the problem. But when I want to make a new user account and I get the following message: I can't create a new user account (Windows 7): the user profile service service has no logon.

  I haven't added new programs in a long time and I don't know when this question has been raised as I've had my laptop for 3 years and this is the first time I create another account than my original. I don't want to reset my computer manufactured settings.

  I also followed the http://support2.microsoft.com/kb/947215/en-us but I can't find any registry master in the list of profiles. In fact, I am the only user in there...

  It seems that my computer does not have a record in the system registry.

  In fact, the problem started when I tried to fix the "C:\windows\system32\config\systemprofile\desktop refers to a location that is unavailable. It could be on a hard drive on this computer.or on a network. Check to make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If he can't always find the information could have been moved to another location. "I was at least able to connect in the new user but will load a default profile and therefore do not load the profile properly. It seems I've done worse the problem after doing

  gpupdate/force

  at the prompt as an administrator.

  The very initial problem started all this was when I was running from Autodesk Inventor, it gives me the following error: Mismatched Ole32.dll and Comcat.dll. And the support2.microsoft.com/kb/201364/en-us is to say that since I am under Win7, the solution is not applied. So I'm stuck. And the next move was trying to see if a new user profile may solve the problem.

  Any suggestions will be greatly appreciated.

  And if possible, please also suggest a "repair" method so I can get Win7 function correctly without reinstalling the whole machine. "" I use a laptop so I do not have installation media.

  Thank you.

  Hello

  Thank you for your update on the issue.

  I suggest that you try to run the file system (CFS) Checker scan to check all the corruption of .dll files.

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:
     sfc/scannow

  For more information, see this link:

  http://support.Microsoft.com/kb/929833/en-us

  Please post back your results for assistance.

• SRV Win2k3 creating the new user at startup profile

  My Win2K3 Server creates a new user profile when starting, rather than use the existing account.
  For example, the account is called "USER"
  It creates a new profile named "USER. DOMAIN ".

  The "new USER. The DOMAIN profile"seems to have migrated all the parameters of the 'USER' profile, so that it is almost impossible to tell them apart.

  My problem is that this profile does not seem to be able to access the DHCP and DNS server (and other services) and the other server Win2K3, which is of the BDC.

  I tried to remove the disk from the machine and on another windows machine, remove the directory "USER. DOMAIN"and place it on a USB key. Then, turn the player on and start again. It just creates another "USER. The DOMAIN profile"again but this time that all parameters were also lost as if it created a whole new USER profile from scratch.

  I need to get her back to the original profile 'USER' to make everything functional again.

  I would also like to know how this happened and why, if someone wants to be good enough to explain it to me.

  Your help would be greatly appreciated.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• I created a new user account, but it does not appear to connect to it. (Vista Home Premium)

  I created a new user account for my admin account.  I tried to create a standard account and I tried to change to an administrator account.  The only place that this account presents itself is managing it new user accounts in Control Panel.  If I try to change user or sign out and then sign back, it never gives me the possibility to sign until the new user account that I created.

  I read another post that said to try to restart in safe mode, what I tried without success.

  I also don't get no error messages, so I was not trying to fix anything, given that I'm not sure it's broken and I don't want to do something worse.  I only use this computer and Vista for a few days now, so I hope it's something simple I'm missing because I am not yet familiar with the operating system.

  Thanks for any help you can offer.

  AFBurris

  Hello

  Logon as administrator

  You must open a command prompt at the entry of the order.

  Start - type in the search-> CMD box find top - make a right click on - RUN AS ADMIN

  Run CheckDisk and continue as needed.

  Good luck. Rob - bicycle - Mark Twain said it is good.

• When I create a new user, the profile is not stored in my regedit.

  When I try to log on to my computer under a different name, I get the error saying profile services cannot load profile. When I created the new user, and then restarted, I checked the regedit and the profile is not listed there. Why is it not save the profile of the machine?

  Hello

  The question is on the domain environment and the post would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

   

  Hope this information helps.

• Windows 8.1 did not create a user profile after creating a new user

  I was deeply puzzled by this problem.

  Just bought a MS Surface Pro 128 GB and upgraded to 8.1 Windows it works fine until I needed to create a new user. He is a user of child for my daughter with a local account only. After creating the new user account, I tried to logon. He complained "user profile Service does not have the sign in» Google it and found the solution to change the registry for the location of the profile displayed on many sites. So I launched regedit. But to my surprise, there is no entry for the new user to the profilelist title - there are only two entries: one for me (admin), and the other is for a user named "fwuser". So I couldn't use the method to rename the master for this problem.

  Could someone give me a tip, which could cause this problem and how to fix it? Much appreciate it.

  Hello

  Have you tried this fix, please try it out and tell us:

  http://www.kapilarya.com/fix-error-user-profile-service-failed-the-logon-user-profile-cannot-be-loaded-for-Windows-8

  Hope this helps, good luck :)

• How can I create a native user in shared services?

  How can I create a native user in shared services?

  Connect to shared services, expand the user directories > native Directory > click with the right button on users, and select 'new '.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Create a new user, FDM

  Hello
  
  Could someone give me the steps to create a new user for the purposes of the FDM?
  I created a new user for the application of FDM without any password, but it does not logon to the same application of FDM with the new user.

  First, you must create user in Shared Services and to grant access for the purposes of the FDM. After that, you need to add user in select (Administration-User Maintenance) application of FDM security level and a location for him.

• Unable to see the user in presentation Services

  Hello
  I created a user in OBIEE administrator but I don't see the user when I go to the Administration of the Referral Services. All the world is facing this problem?
  
  
  Thank you

  If you need to set the security permissions on the user who is logged in to create a group in the administration tool that points to the USER variable and create the group even in presentation services to set relevant privileges in this regard. In this way the LDAP user would inherit all the security features set for the group to which it belongs once it connects. If you do not need to set privileges on the user, then you have no connection as an LDAP user. In order to see the users, it should be possible that when the user logs in for the first time after the LDAP authentication.

• Remove the admin and create a new user without disc 10.6.5

  I got a new computer from a friend, family, which has expired.    I did not drive or Admin password, how do I remove the admin wipe and back in mobile by default so I can create a new user

  You will need the original installation provided with computer discs.

  Clean Install of Snow Leopard

  1. start the computer using the Snow Leopard installation disc or disc 1 that came

  with your computer.  Insert the disc into the optical drive and restart the computer.

  After the ring, press and hold the C"" key.  Release the button when you see

  a small gear appear under the dark gray Apple logo.

  2. once the load setup program select your language and click continue

  button. When the menu bar appears select utility drive in the Utilities menu.

  After charge OF select hard drive entry in the list on the left (mfgr. ID and drive

  size.)  Click the Partition tab in the main window of THE.  Set the number of

  partitions to one (1) from the Partitions of the dropdown menu, click on the Options button

  GUID, click OK, and then select define the Mac OS Extended format type

  (Logged, if supported), and then click the apply button.

  3. when formatting is complete FROM and return to the installer.  Move forward

  with the installation of OS X and follow the instructions included with the installer.

  4. Once installation is complete your computer will restart in the Setup

  Assistant. After finishing Setup Wizard will complete the installation, after which

  you will use a new installation of Mac OS X.  You can now begin the process of updating

  at the opening of updated software and installing all recommend updates to bring your

  current installation.

  Download and install Mac OS X 10.6.8 v1.1 updated Combo.

• Cannot create a new user account

  Hello and good evening,

  I have a laptop HP Pavilion I've had for about a month. I was creating a HP recovery disk. As I didn't have the right amount of available disks, I cancelled it. The next time I went to do the same thing, there was a message in the HP support assistant saying that the recovery disk was no longer available.  So I created an image of the system in case I ever needed to recover my OS. It was stored on drive C. I copied and pasted into the recovery d drive [I don't know if you can do].

  Anyway, some things have changed after I created the image of the system. The C: disk OS folder has been renamed Windows C:.

  I felt a little uncomfortable about the whole, so I thought that I create another user account. Hoping that this would also restore my HP Recovery disk.

  In any case, I went to do this and all seems to be OK, install applications and so on, until he came to a blue screen that says "Please wait". He remained on the screen for about 2 hours, after which the battery was flat. I repowered it and he started upward. He returned the same screen. I took the battery and plugged a USB based recovery disk. This led me to the Welcome screen, and I could log into my original user account.

  I'm not game to try again to create another user account in case something terrible happens and it does not restart.

  What should I do?

  1. create another user account give back me my recovery drive originalHP?

  2 could have another go to make him a corruption on my hard drive?

  I don't know if it's an HP or a problem of Windows 8, so I posted both.

  I hope someone can help

  Chris

  Hi jcdck,

  I see that you have some problems with your recovery disk. Create a new user account won't get your recovery disk. The same file structure will be implemented regardless of the user account. You should not generally be copy or save anything on the recovery disk.

  You should be able to restore your PC to factory settings , but you need to back up personal files on an external drive or burn to a CD. It might not get your recovery back disc because this isn't the Windows function of HP.

  Your only other option is to order the recovery CD for your model. If you can provide me with your product number I should be able to get your link to order. Are which country you located?

  Thank you

• Create the new user and remote access

  Hello, I create a new user from the admin panel. Now, I want to ask how my friend will have access to my nas also. He tries to connect from https://readycloud.netgear.com/ but it does not connect!

  I want to create some users and they can have access to my files from ther House. How can I do?

  I sin ready 102.

  Thank you

  Hi h_tsopelas,

  Please check this articleReadyCLOUD.

  I hope this helps!

  Kind regards

  BrianL
  NETGEAR community

• Tab 2 A10-70 - create a new user

  Need to create a new user account but can't find this sub settings according to manual I should have a PERSONAL option?

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  You are probably right. You could try to seek support from Lenovo. A lot of posts here are not very appreciative of their support, but I contacted them via chat a few weeks ago and they were very helpful and there was no waiting period.

• Created the new user account, and now the settings are gone.

  Accidentally, I created a new user in my previous account admin account, and now all of my settings are gone, as well as all the files on the first account. Is there a way I can return to my old account, or restore the files and settings? Either way, I run Windows XP. Help, please.

  You might be able to try a system restore to before you created the user account.
  Track information to restore the system in the KB article below:

  Article number: 2534454 - how to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/2534454
   
  I hope this helps.