Create a user account specific for the base game.

Similar Questions

• Set up a user profile specifically for the game

  Hi all

  I installed Windows 7 (64-bit) and use it mainly for work (Excel, SPSS, Word). I also have many programs start automatically with Windows and run as background processes. What I want to do is create a profile user who loads only minimum programs and services required to play video games. Currently I have to manually complete the applications and services, which is a pain in the thigh. How can I configure a user profile specifically for games?

  TYIA,

  Mark

  Hi Mark,

  You can create a new user profile, but you will need to put your computer in a clean boot for the new user account only State to play games and to disable applications/services that are not used frequently.

  New user account will inherit all startup applications and services of the administrator account.

  To create a user account , follow the steps in the link
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  To put your computer in a clean boot State, follow the steps in the article.
  http://support.Microsoft.com/kb/929135

  Aziz Nadeem - Microsoft Support

• Is impossible to turn on the guest account. Cannot create new user account. "The service user profile Service has no logon. User profile cannot be loaded. »

  Is impossible to turn on the guest account.  Cannot create new user account.  After to try one of those and reboot, the icons of account appear, but when you try to use, the following instructions of error present when you try to log in with the new account or comments: "the user profile Service service has no logon.  User profile cannot be loaded. "I looked at the answers to all the previous ones (including the KB947215) and no not to address specifically.  For the most part, they seem to assume that there is a guest or a new profile in the first place...

  The system is Win 7 Pro 64-bit with all available updates.  I can't say when the last time that the guest account has worked (rarely used) and just found out I can't do new additional user, accounts trying to solve the problem of account of comments... so I have not tried to enter Safe Mode and do a system restore , because I can't yet identify a useful restore point...

  There are no entries in the registry for a guest or a new standard user account.  The registry entries for the three accounts normal-quickly (2 x admin, 1 x level) seem to be appropriate.  Watch register computer/HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  S-1-5-18 = system profile

  19 = local service,

  20 = network service,

  21 long numbers + 1004 plus User1 (admin),

  22 long + 1005 plus 2 user (admin),

  23 plus long + 1006 is user3 (standard,

  and no comments or additional profiles appear.

  C:\Users includes

  All users,

  User1,

  User3,

  By default,.

  Default user (which is inaccessible for me, even as an administrator),

  Public,

  User2,

  No guest or additional profile appear.

  All except the default user (I can't open) seem to have the appropriate, NTUser.DAT files although I don't know how to check for corruption.  Having both a default value

  and a default user folder seems hokey.

  I think I understand instructions how to fix or remove a corrupted profile, but that does not apply to the guest account or profiles that do not exist.

  Help?  Ideas?

  This message contains the strange solution.

  [Plan B - I found one thread where one user said that the same symptoms of the problem that you experience this problem solved]

  - - - - - - - - - - -

  Plan h - while another user said that it was caused by a file Windows Live problem

  This is the thread I can not create a new user account (Windows 7): the user profile service service doesn't have the logon

  You find it difficult to follow the thread as it's long and reported problem by different people to confuse it and there is also a bit of bickering [long filaments often end up being quite incomprehensible].

  ..., See references to the event viewer in the middle of page 4 and Windows Live we [at the bottom of page 2 more on page 3].

  I see not the logic of the any of those things, but if one of them do things long enough that you are trying to create new accounts that works, you will know how in the future until a proper solution is found.

  This is the useful part where this user has tested the solutions proposed in this thread linked above: -.

  This has proved to contain leads to a difficulty.  Have to admit, when I read everything the first time, several days, I did indeed find it confusing and even the parts that I "heard" (sorta) does not appear to be related to my symptoms.

  It turns out that the answer of JDMICHAL May 17, 2011 contained this:

  (1) C:\Users\Default\AppData\Local\Microsoft\Windows open live
  (2) this directory has two subdirectories with a single file of each. Go into each directory and apply the following:
  (a) make a right click on the file, open the properties.
  (b) click the Security tab.
  (c) it will issue a message: "to continue, you must be an administrative user with permission to view this object's security properties. Would continue you? ». Click on the button continue.
  (d) click on the Add button...
  (e) ' everyone' type in the box at the bottom of the dialog box. Click on "check names"; It should be emphasized the "everyone". Click OK.
  (f) ensure that the new "Everyone" entry "read" and "read & run" check under the column "allow".

  After doing this for two files, attempt to connect to the account. He must undergo.

  The procedure (bascially) worked... Although the different answers on my system differed slightly along the way (perhaps due to the slightly different versions of Win 7?, because I was already logged in as an administrator?).

  In any case, "Everyone" with the read and read/execute permissions adding to these two files seems to have done the trick:

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm

  and

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm

  Thank you for leading me to this!

• Administrator and user only: should I create a user account for myself or run as administrator?

  My laptop is my own, one machine, not networked to any other machine and I am the only user, mainly at home. Create a user account for myself or function as an administrator?  (Thanks for a MAC person unknown w/pc!)

  Hello JudySanDiCa,

  I suggest that you create another user account.  This can be very useful in case you forget or lose the administrative password.

  How to create and configure user accounts in Windows XP:

  http://support.Microsoft.com/kb/279783

  Thank you

• I can't create a new user account (Windows 7): the user profile service service has no logon

  I tried to create a new user account, but I get the following error when I try to open a session with him:

  the user profile service service has no logon

  Until I leave than anything more I will add that I activated the hidden administrator account and this is the account I use to create a new standard user account.

  Most of the patches for this issue are due to the fact that delete manually a user account does not remove the registry key that are associated, and you are required to go to the next section of the registry:

  HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\WINDOWS NT\CURRENTVERSION\PROFILELIST

  and delete the key associated with the user account to be deleted.

  This fix IS NOT help, because whenever I try to create a new user, Windows doesn't bother creating a registry key to the new user.  The new user account appears in the account management window.  If I right click ondesktop and select Properties, then the settings , select the Advanced tab and click settingsunder USER PROFILES, the new account appears not here no more.

  It is a huge problem.  I have other people who use this laptop and I don't want to use my login information, or the guest account.  I'm not editing the registry just to make a new account.

  Please tell me there is a fix for this that works.  Windows 7 was not free, and this kind of problem is very frustrating for the premium software.

  Thanks - this is the only tip that help me to find the solution to this problem.

  Two files in the folder C:\Users\Default\AppData\Local\Microsoft\Windows Live could not be copied without administrator privileges.  This caused the connection in the attempt fail for all newly created user accounts.  The files are:

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm

  and

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm

  I've added the read permission for all users in these two files and retried the logon.  The opening of session proceeded set up initial user and filled perfectly.  Probably, this problem started when I installed Windows Live Messenger which is the only Windows Live application, I installed.

  Other important in your message board was to check the event log which stressed the two files which could not copy.  Otherwise provided in WARNING messages immediately preceded files event log error message indicates that the profile service could not connect.

• I cannot create new user accounts and have tried all the steps listed in all of the current discussions, does not

  Good people you've heard of this one before:

  I can connect to my basic admin account, but not others.  I tried to create new user accounts after you delete the old user accounts but system would not apparently carry out process.  I get the following warning:

  Service user profile Service failed to connect
  User profile cannot be loaded.

  I tried all of the recommended patches (see list below)

  1 ran all appropriate steps as stated in the article: http://support.microsoft.com/kb/947215 - no joy
  There is not other profiles listed in the register except the administrator account on the basis and since I couldn't connect successfully to a user apparently newly created accounts, the profile has not completed the process of generation.

  2. I have not ran the SFC system - no joy.  He replied with the following: Windows Resource Protection did not find any breach of integrity.

  Then... of other big ideas?

  Oh
  Running Win 7 with all latest updates (login problem is not a new problem according to my children - I just got back from the extended learning this persistent problem)
  I am on an Intel machine running dual quad core which is only 6 months old.
  I run MS Office 2010

  Hello

  I suggest you to consult the steps mentioned in the link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/i-cannot-create-a-new-user-account-Windows-7-the/dee340f7-5da9-402b-9e99-293dbd249a53

  Hope this information is useful.

• Months ago, I created a free account but now the Church I work for a software how to install help it serial number?

  Months ago, I created a free account but now the Church I work for a software how to install help it serial number?

  What software you want to install?

  If it is old software that comes on a DVD, then install from the DVD and enter the serial number when prompted.

  Otherwise, you can download applications and install - this document provides more details. You can not require a serial number but must sign the software with an Adobe ID, which has the appropriate right.

• The user account cannot access the internet once parental used contract, even after you turn off the parental control

  I created a user account for my child. I am able to access the internet through firefox. Then I set the parental controls and can NOT access the internet more. I turn off parental controls for this user account. I still can't access the internet from this account.

  Parental control is a part of the operating system Windows and not Firefox. You can get help here: http://support.microsoft.com/ask-community/windows/

• Cannot create a user account

  I can no longer create a user account on my computer without a following error message is displayed. It is said that my account name cannot contain characters other than letters and numbers. the name in which I entered did not include one of these special characters, so I don't know what I did wrong. I can also change an existing account name, or what I can change my account picture. Help, please!

  Hello

  If you logged in as ADMINISTRATOR, then this account is probably corrupted.

  Try these to erase corruption and missing/damaged file system repair or replacement.

  1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  3. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  After the foregoing:

  Try to use the ADMIN which is accessible from Safe Mode - repeatedly tap F8 as you start - ADMIN
  has no password by default (unless someone has changed). Use this ADMIN to perform the functions
  suggested below (use of the hidden ADMIN account) If you are unable to access the mode without failure.

  Then do-, use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK
  then go back and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the
  same for other accounts that may be difficult. Then if necessary you can also reset your password
  in the accounts. Do not forget to leave your Admin account and the other to the desired level.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot use old account properly then you can always use an Admin to migrate to a new
  (remember to always leave an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Administrator log - on: can someone tell me why Windows Vista Premium does not create a user profile ADMINISTRATOR for me by default

  Can someone tell me why Windows Vista Premium does not create a user profile ADMINISTRATOR for me by default, as I am the main user and why he keeps me access to many programs and features in Windows, including installation and view and edit privileges?  How can I set up my profile as ADMINISTRATOR rather than another user profile and get rid of all the other profiles?  Please write to * address email is removed from the privacy * for your answer.

  Steve

  Can someone tell me why Windows Vista Premium does not create a user profile ADMINISTRATOR for me by default, as I am the main user and why he keeps me access to many programs and features in Windows, including installation and view and edit privileges?  How can I set up my profile as ADMINISTRATOR rather than another user profile and get rid of all the other profiles?  Please write toEmail removed privacy for your answer.

  Steve

  Let me soce entry details:

  1. all computers need to have at least one administrator account. It will not work without it.
  It does NOT, however, create a profile For YOU defaultAdmin. It belongs to the user or the owner to create and decide who is Admin, and who is a regular user.
  2. even an admin account will not get to install and change the settings automatically. UAC (user account control) always appears to ask for confirmation of the task by clicking on continue, or by typing the admin password.
  3 be the main user is not to be an administrator. It is up to the user/owner of the computer to be configured as such.
  That said, now my question... How do you know that you're not an admin?

  t-4-2

• How can I remove guest account configured for the administrator?

  I tried to add a second user account on my computer and I blew it. My main user account is now defined as a standard account and no matter how many times I click the button to set it as an administrator account that he will not save these settings. The guest account (which I want to delete) is defined as an administrator account and it wont let me save it as a standard account, because there is no other administrator accounts. Even when I try to create a new account just to see what he would do he tells me that he cannot accept some of the characters that I use for the name of the account, even if it's just 5 letters, so I can't even create the new account.

  I have no idea what's going on with my user settings, but I want to just that everything back to how it was before... with a single main account configured for the administrator.

  Can someone help me?

  I bet that your administrator account is an admin account and your guest account is a regular account. Buttons that you look at don't tell you the State of the special consideration, but the change that you can apply. In other words, looking at the administrator account, the 'Administrator' button is highlighted not because it's already an admin account!

  Now you should do this, in the following order:
  1. Create a CD to repair Windows via Control Panel / backup and restore. People like you who make their own PC maintenance need.
  2. Test the CD.
  3. Create, test, and document an admin account to spare, even you have a spare House key.
  4. Disable the guest account.

• vCenter DB and DB Manager Update on SQL - use a user account to access the two DB or separate user accounts?

  Hi people,

  I built a laboratory to test ESX and I always wondered what the best practice when you want to access the SQL2005 DB vcenter and updating manage DB.  In the past, I always created separate user accounts to access their database.

  Any problems if I were to use one account for both of the DB.

  Looking for ideas on this.

  Kind regards

  Rick

  Hello

  Role separation is advisable for many reasons. In this case, you can create a more flexible and more secure configuration using two accounts. Functionally, it work whatever it is, but if you need to separate the instances in the future you might some unwanted configuration dependencies.

  Kind regards

  Mike

  http://blog.laspina.ca/

• Try to set up Time Machine, and I get this error; Keychain 100001 error while creating a system Keychain entry for the username "JGarrett" and the URL ' afp://JGarrett@JPG Capsule._afpovertcp._tcp.local./Data time airport.

  Have cleared airport Time Capsule and factory reset after getting this message.  Don't know where to go with it.

  Some files have a property incorrectly together which will prevent them from being changed or deleted when the system is running. This property cannot be removed in recovery mode. If you do not feel that you can do this yourself, please someone more experienced to help you get.

  1 back up all data. There are ways to back up a computer that is not fully functional. Ask if you need advice. Don't skip this step.

  2. disconnect all external storage devices.

  3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.

  4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  6. triple - click anywhere in the line below to select this option:

  chflags norestricted /V*/*/L*/Keyc*/*

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  7. Quit Safari. You go back to the OS X Utilities screen.

  In the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.

  Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.

  8. Select

  ▹ Restart 

  in the menu bar.

  9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.

  Select and copy this line as in step 6:

  sudo xattr -c /L*/Keyc*/*

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the same Terminal window. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and start over.

  Wait for a new line ending with a dollar sign ($) below what you entered. You can then quit Terminal. Test.

• I can't access my user account even if the password is correct.

  I was not able to access my user account even if the password is correct. It happened to our 2 admin represents, so now we only use the guest user account.

  Hello

  Something must have corrupted these accounts.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  These problems and similar bugs can help:

  A temporary profile is loaded after you connect to a Windows Vista-based system
  http://support.Microsoft.com/kb/947242

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  Try these to erase corruption in the case where it plays a role.

  1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  3. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Other methods:

  Use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK then go back
  and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the same for others
  accounts that may be difficult. If necessary you can also reset your password in the accounts.
  Do not forget to leave your Admin account and the other to the desired level.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Create a user account

  This is probably a very simple question, but I don't know how to add an another user account to my computer or where to go to start the process.  Could someone guide me please?

  http://www.Vistax64.com/tutorials/93009-user-account-create.html

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  http://www.Lockergnome.com/Windows/2006/12/05/create-a-new-user-account-in-Vista/

  The above will help you.

  See you soon.

  Mick Murphy - Microsoft partner