Create a vectorial map?

Similar Questions

• Windows cannot create the network map. Responses of the other devices on the network are delayed or on the network, there is a router incapatible

  Original title: no network card
  I installed a NETGEAR N300 Wireless USB Adapter on my computer which is a desk top Dell 64-bit running Windows 7 Edition Home Premium. There are five computers on my network. Two of the others use the same model of NETGEAR wireless USB adapt. I removed the Ethernet cable after the installation of the wireless adapter. I can say that the new wireless adapter works fine. When I tried to map the network I got the same message that appears in some of these problems: "Windows cannot create the network map. Responses of the other devices on the network are delayed or there is a router on the network incapatible". I have restarted this computer in SafeMode as suggested in the above problems. I tried other things like disabling the wired connection has always existed for the cable. No effect. Then I tried mapping the network on the other computers. All failed with the same message. All the other four computers are 32-bit. Three of these computers are also running Windows 7 Home Premium. They are the best desktop computers. The other computer is a Windows 7 Starter netbook running. It is the 32-bit computer, always using a cable. That will be replaced with the same wireless adapter model NETGEAR. Anyone know how to fix this or is this a bug? It would be nice of the network software of Windows 7 has worked as it is supposed to. TO.

  I went the last wired wireless computer and the problem disappeared. The five computers can view the map now without any problems.

• Creating an interactive map?

  Good afternoon

  I'm hoping to create an interactive map, where if you hover over a part of the photo card appears.

  Many years ago, I used to be able to design a similar thing using the Macromedia Flash software, I realize account changed to Adobe Flash, then animate CC. This sounds like something that I would be able to do now in Adobe animate CC and if so, I am easily able to save interactive as HTML5 file, so that it can be viewed on different devices?

  Any help most appreciated.

  Thank you very much

  Yes, you can use animate pro for this.

  you would animate pro and start creating an html5 project.  your interactive map could be created using any code if you use the buttons to the constituent parts of your card and add the popups for the frame.

  If you want it to work with touch devices, you probably want to use the code to toggle popups on touch or mousedown events.

• How to create an interactive map?

  How to create an interactive map using digital publishing suite in InDesign? Basically, it's a map of the amusement park and when you click on a button I want a page of description of a turn to show that has interactivity on him and then it can be closed and another button on the map can be clicked to view another page of description of a different turn. Is this possible?

  Use a multi state object. According to how many point of interest you want on this map, it can become quite involved.

• How to create a data map to update the child entities in the database of Siebel

  Hello
  
  I've created the following mapping:
  
  (1) action (Global)
  (2) SR (relationship - SR Action, one to one)
  (3) time Tracker (connection - Time Tracker, one-to-many Action)
  
  results:
  (1) total number of hours Standard - it's in the entity of the Action
  (2) the standard hours for Tracker - this is defined in Time Tracker entity
  
  I used the card data to transform the response of the OPA at the structure of IO integration and adapter Siebel EAI to write this in Siebel database.
  
  It strives to update Action (Global) entity but not for Time Tracker (child entity).
  
  Can you please let me know the IC card to establish the relationship to create the node child entity?

  It is very difficult to do with a Mapper data for integration objects.
  The main reason is that the answer to the OPA is not a hierarchical structure like the IOs, so it is possible to map the first level, but I have not seen a way to do for the child of the entities.

  General approach people use is to write an escript Business Service to perform the mapping more complex data.

  We seek to support the ability to manipulate IO Siebel natively in Takeovers in the next version of the connector.

• Need help to create a site map in Dreamweaver cs5

  Hi all

  I'm looking to find a way to put together a plan of my site ( http://www.gmanwebdesign.com ) and other is there a feature in dreamweaver cs5 help or can anyone recommend a.

  as you know I'm still in the early stages of the Web design / dev and all your help and advice is greatly appreciated.

  gman

  Hey Gman,

  in this thread http://forums.adobe.com/thread/582456 mhollis55 said that the creation of a site map is removed from CS4. In my CS5 I couldn't find these functions nor, I found this feature in my old CS3 (!) however. Here are some links where you can create a site map:

  http://www.sothink.com/product/treemenu/index.htm, there is a trial version too, or

  http://www.XML-Sitemaps.com/

  Hans G.

• Vista cannot create a network map

  the two 2 computers running Windows Vista Edition Home Premium.  Network and sharing screens put in place identical.  On my computer (from the network and sharing Center), I can click on view full map and it shows my network card.  On the computer of my wife (of the network and sharing Center) she can click on view full map and it rises "Windows cannot create a network adapter for the selected type of connection networl.  I might add that both computers are 'wired' internet/router.

  Any help?

  Hi Duane_TN,

  Are your computer and your computer wife have chipset or card network NVIDIA perchance? or a Linksys router by chance?  This is a post in the forum of Linksys, you might want to check in to see if it applies to your computers:

  Symptom: Windows Vista computers are not put on the Vista network map. Or well, you get the following message when you try to view the full network map: "Windows cannot create a network adapter for the type of connection chosen network." To check go to: PANEL-> CENTER NETWORK AND SHARING. SEE the FULL map (top-right) and find either: A Windows Vista-based computer is listed down under: "the following peripheral discovered may not be placed in the plan. or You get the message, "Windows cannot create a network adapter for the type of network connection. Possible cause: The offending computer has an NVIDIA nForce Networking Controller whose property "priority and VLAN" to "priority"active & VLAN. Solution: Set the property 'priority & VLAN"to"Priority and VLAN Disabled"as follows: Reach: START-> CONTROL PANEL-> ADMINISTRATION-> COMPUTER MANAGEMENT TOOLS In the resultant "computer management" window select: DEVICE MANAGER (left side). "NICs" (right). Expand "Network adapters" and see if it lists a NVIDIA nForce Networking Controller. Right click on 'NVIDIA nForce Networking Controller' and select 'properties '. In the resultant 'NVIDIA nForce Networking Controller Properties' window, select: "Advanced"(tab) ". Under the list of the 'properties', select 'priority & VLAN. for 'Value' assign ' priority and VLAN disabled. References: ---------- How to get the Vista network map works on nVidia MB http://www.TechIMO.com/Forum/networking-Internet/197756-how-get-Vista-network-map-working-NVIDIA-MB.html Other things to check: Update to the latest version of the driver (65.7.4.0 works for me). Article referenced above indicates a previous driver may be bad.

  Hope this helps, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with creating an image map

  I struggled to create a simple image with Dreamweaver CC map.

  I'm in Design view and have a simple flowchart that I would have on my site with each network diagram box with a link to an additional page with more depth on the subject content.

  If I click on the image in live view, the properties toolbar does not show the part of image map (see first image).

  

  However, if I click on the code from the image map controls appear (see the second image).

  

  Now, behold, where the question is...

  If I click on the rectangular selection tool in the map properties bar and then try to select the portion of the image to have a point of access/link; the part of the map of the toolbar disappears and returns to the appearance of the first view?

  Therefore, I can't make a selection or create the HotSpot...?

  Please help with advice you may have.

  The site is responsive, and I decided to recreate this image as an SVG, so that it can scale - with a sensitive site, but I just want to experiment with the layout before generating the final graph.

  Thanks for any help you may have!

  Problem is that you are in LIVE view mode.  Switch to DESIGN view for working with image maps.

  

  What happened to the use of SVG for your tree?

  Nancy O.

• Google Maps - Site has been created with correct map location, now displays an incorrect location?

  Hi all

  I don't know what is happening. I created a website for a client and used the Google Maps widget to add a map on the site.

  When it was created and downloaded first, everything was fine and in good working condition.

  The client sent now that on the site, Google maps shows another location, which is.

  Here is the website with the location of the maps incorrect page: Hours location

  Here is the map/Info which is supposed to be displayed: https://www.google.com/maps/place/Heddon+Museum/@41.9865694,-86.1157902, data/15z =! 4 m 2! 3 m 1! 1s0x0:0x9768c49fcde9e3a1

  I have also included a screen shot of the page open in Muse to show what it was created as originally published as:

  

  A few questions-

  1. how this change? I opened the last registered site which has been published and it has the location of the correct card (as shown in the screenshot above).

  2. How can I prevent this happening again? I'm sure that if I re - download it will fix it, but it's just a band-aid and I want a permanent solution to prevent it.

  Thanks in advance!

  Melissa

  Just figured it out with the help of the cat from Adobe:

  They had put me in the 'Museum of Heddon' name instead of the address, and it fixed the issue.

  They said that it captures the Google code, so most likely, what happened, that's what they (Google) changed/updated their code.

  A note on what I found: if I type the full address 'Museum Heddon Dowagiac MI 49107' it always goes to the wrong card location. By simply removing the postcode, it goes to the correct location. Not sure why she does that, I'll probably have to contact Google.

  If anyone has another preview comment below, I wanted to just that everyone knows how to solve this problem if they were also have.

  Thank you

  Melissa

• How to create an interactive map to measure?

  Hello.

  I have Adobe CC and would like to know the best way to create a map that you do Pan autour, perform a zoom and zoom, with features on this topic (such as bus lines, trails, parking, locations, etc.). I heard of the OSM in InDesign, and integration of Google maps in Muse. But I want a combination of these things. It must be in a format that works in the form of web content, so that the user can click on things to highlight and zoom in for what they are interested in and pan around. It would be useful to use Google Maps as a basis if possible, and then add my own details (such as the lines of bus etc.). I could create a map at the base from scratch but understand this would lengthen the process significantly. This would require training in animation software, or web site design? And is it available on Lynda.com? I already have a subscription.

  Any help is appreciated.

  Thanks, Matt

  I think that Flash Pro (soon to be renamed to animate CC) is what you need.   Yes, it will probably training. There are a lot of tutorials for Flash Pro on Lynda.com.

• Cannot create an image map [was: where are the panels?]

  Where is the sign that used to be left? I want to make a link of the rectangular map area (image map) after a few hours, I had the 'map' appears in the properties (for those wondering I had to be in design mode in the upper left and upper right dropdowns select design and image). The next step is to choose the tool circular or rectangular to select an area, but where is this toolbar now? How do you get it to appear?

  Edited by moderator subject line.

  You can create interactive images only when the Document window's Design view. It must also have an image selected at the time.

  Image maps cannot be created in Live view mode.

• Any attempt to create an interactive map with flash - errors with my actionscript

  I currently have a problem by creating a set of buttons that are supposed to put the individual layers on and off.  The layers I have are: places of fishing, facilities, trails, map elements, aerial photo and car parks.  He is in error #s 1119 and 1120.  Anyone could explain the possible reasons I get these errors.

  It might be worth mentioning that I used a tutorial made with Flash CS4, but I write the code in CS5.  This is the exact code I use:

  spots._visible = false;

  facilities._visible = false;

  parking._visible = false;

  Elements._visible = true;

  Aerial._visible = false;

  Trails._visible = false;

  displayedSpots._visible = false;

  displayedFacs._visible = false;

  displayedTrails._visible = false;

  displayedEles._visible = true;

  displayedAerial._visible = false;

  displayedPark._visible = false;

  fsbtn.onPress = function() {}

  If (spots._visible == false) {}

  spots._visible = true;

  displayedSpots._visible = true;

  } else {}

  spots._visible = false;

  displayedSpots._visible = false;

  }

  }

  facbtn.onPress = function() {}

  If (facilities._visible == false) {}

  facilities._visible = true;

  displayedFacs._visible = true;

  } else {}

  facilities._visible = false;

  displayedFacs._visible = false;

  }

  }

  trbtn.onPress = function() {}

  If (trails._visible == false) {}

  Trails._visible = true;

  displayedTrails._visible = true;

  } else {}

  Trails._visible = false;

  displayedTrails._visible = false;

  }

  }

  mebtn.onPress = function() {}

  If (elements._visible == false) {}

  Elements._visible = true;

  displayedEles._visible = true;

  } else {}

  Elements._visible = false;

  displayedEles._visible = false;

  }

  }

  aebtn.onPress = function() {}

  If (aerial._visible == false) {}

  Aerial._visible = true;

  displayedAerial._visible = true;

  } else {}

  Aerial._visible = false;

  displayedAerial._visible = false;

  }

  }

  pbtn.onPress = function() {}

  If (parking._visible == false) {}

  parking._visible = true;

  displayedPark._visible = true;

  } else {}

  parking._visible = false;

  displayedPark._visible = false;

  }

  }

  First of all, your use of == versus = is correct, as you have.  == to test for equality, = is for value assignment.  As a shortcut under test for true false you can avoid it altogether however because the conditional is just test the value of what is inside the parenthesis... If (parking._visible is false) {may simply be if (! parking._visible) {}}

  The next thing, check to make sure that your publication settings are fixed for Actionscript 2.  Those who seem to be the AS3 error numbers that mean your file are implemented for AS3, but you use AS2 code.

  If the problem persists, you must include the entire error messages in your ad

• Attempt to create overlay route map with...

  Hi all

  I am trying to create a route for the updated plan overlay direct semi. Currently, I'm trying to understand how the game a value in pixels in the command ForeignWindow transperant so I can draw my lines inside, then superimpose on mapview. It appers that the only possible pixel values available are between 0 and 255, which leads me to believe the transparency with this control is not always possible because with this limit, I can even clone the image under my control.

  Is there a way I can manually pull on any other control to achieve the desired effect?

  Kind regards

  -J

  Pixels have an RGBA value, where RGB is the color between 1 and 255, and A is the alpha value, carried out by Alpha Composition. For each pixel and it associated the pointer, R = [point], G = [pointer + 1], B [pointer + 2] = and a = [pointer + 3]. Focus on changing the alpha value of your pixels.

  On a side note, I tried to do a very similar thing on another project. I don't know that it is possible, in some way, with a bitmap image.

• Message error "Windows cannot create the network map.

  I double click on my router for initiating the process of network card and I get the message...
  
  I did all the recommended solutions and everything is in order. Can not know why it is not mapped my network.

  Hello

  I only see the answer here-

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/network-functions-normally-but-Windows-cannot/849bdfc6-5c74-E011-8dfc-68b599b31bf5

  Thank you.

• Creating a holographic map effect in photoshop?

  How to create a holographic effect as those of pokemon?

  Examples: Holographic & Non-holographique

  Hello

  (your example do not appear)

  Google search for: CC, holographic effect photoshop

  Video: the holographic in Photoshop - YouTube effect

  Stone