Create dynamic tabs

Similar Questions

• How to create dynamic Services based on VMware files

  Hello

  We would like to create as many services as VMware folders in VMware, so whenever we will be add/remove any computer file VMware virtual of the service components will also be day/follow-up...

  We check the option "Create a rule to include a group of components" in the function Builder, and adding the conditions of rule as:

  ! VFolder where name like ''.

  But the result is not successful, because we are unable to choose the right component that inherites the VFolder type components...

  The same works of query in the "Script Console" and the children of the property spreads with all virtual machines...

  Any ideas?

  Thank you.

  Hi Eneko

  One of our systems Consultants found a carton of community that creates dynamic records VMWare-based services. I have attached the cartridge and I included some comments from the author, Thomas Bryant.

  I am pleased to announce the release of version 1.0 of a cartridge personalized for VMware files.  I had a lot of customers ask me to automatically build services in vFoglight based on the structure of folders in vCenter, and that is exactly what will make this cartridge!  This cartridge contains a rule that runs once per hour and will create a category called files VMware services and then for each vCenter, the data center and the series of records, create services and add virtual machines to each, as in vCenter.  Simply load the cartridge and wait about 30 to 60 seconds depending on the number of files you have, and then services will be created.  Please let me know if things work, good or bad.

   

  Updated - Version 1.0.1 released

  The update fixes a problem with the sort order of the structure "Virtual Machines and templates" vs "Hosts and Clusters" and the following files which were not created properly.

   

  Known issues - currently will not remove a service based on a folder that has been deleted from vCenter.  I'll look to add this in the next version.

  One last thing. After you install the cartridge, a new rule, named Custom - create/update records VMware will be added under VMware_Folders cartridge. If edit you it and look at the Conditions & Actions tab, you should be able to see the groovy script that is used to create and populate the services. Here, you should be able to edit the prefix added to each folder in Foglight. By default, the prefix is "Folder_.

  I hope that this solution is satisfactory for you,

  Kind regards

  Gaston.

• Create a tab that points to an external link?

  Hello
  
  Oracle 11g r2.
  Apex 4.1.1.00.23.
  
  I need to create a tab that points to an external link (in fact a link to our old Forms application).
  
  For now, I simply added the tab "manually" in the model by writing the necessary HTML code after the substitution #TAB_CELLS string #.
  It works but it does not control permission scheme, etc.
  
  Is there a way I can create a tab without associating it with an existing page, but pointing to an external link?
  
  Thank you.
  
  Yann.

  Hello

  OK, you didn't say in the first post you need to open the url in a new window.

  But create tab that lead to the page zero.
  Create a dynamic action in the zero page that is triggered when loading the page and alter the tab a tag href and adds the target attribute.

  Set the permission tab and dynamic action

  Kind regards
  Jari
  -----
  My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
  Twitter: http://www.twitter.com/jariolai

• AMPe ADF with Dynamic tab Shell not made in iPAD 1 +.

  Hello
  
  We used the Oracle Dynamic tab Shell templates to build our page of dashboard with several dynamic tabs.
  A year back when we have initially created the main dashboard with Dynamic tab Shell and used of the UIShell API to open new dynamic tab when clicking the command links in the browser side of left hand. We started with Jdev 11.1.1.3 and upgrade us until Jdev 11.1.1.5.
  
  Now this last requirement is, we need to test our applications in the Safari browser in iPAD (2.0). During the test, we observed under questions.
  
  (1) the page with Dynamic tab Shell JSPX is keep showing "Loading"... "We had updated the Safari browser twice to render the page.
  (2) any af:commandLink under the JSPX which has shell model dynamic tab, does not. We have lots of links on the left navigation and when clicking on each link will open a new tab dynamic (we use UIShell API). Nothing happens when clicking on these af:commandLinks.
  (3) we have 'Home' and 'Logout' links at the top right. Nothing happens on the links click too.
  
  All these as af:commandLinks and af:commandButtons not working as expected when we have them beside a JSPX page without shell dynamic tab.
  
  Tested and observed the same behavior both in version 1.0 and newer iPad iPAD 2.0.
  We desperately need help on thin. Pls let us know, if I need to provide more details. Are there specific configurations required to make it work in Jdev 11.1.1.5? At this stage we cannot improve our Env 11.1.1.6 or 11.1.2 as we already have these applications in Production and we should give users flexibility to be used in the iPAD.
  
  Help, please!
  
  Thank you!!
  Subba.

  Subba,

  I understand, however support for iPad added in PS5 is a set of new features, not a bug fix, so this cannot be claimed as a one off patch with the support of the Oracle. In this case that is expected to capture customers highlights new features of upgrade.

  Thank you

• Dynamic tabs based on values of table

  Hi all
  
  How can view you tabs dynamically based on the user authorization and the values in a table that contains the id page and tab id, for example?

  based on the authorization of the user

  This is already the standard features of Apex.

  and values in a table

  You can use jQuery to hide a tab. So, you create a tab in the Apex, but hide when necessary when you run the page. Something like:

  if () {
     $("#tab_id").hide();
  };
  

  Put this in the "run when the Page loads" in the JavaScript section on the definition of the Page.

• Oracle Dynamic tabs Shell - open same workflow in multiple tabs

  Hello
  
  Summary of the problem:
  Is there a way to open a workflow (bounded task flows, with always create new scope txn) in multiple tabs using a page (jspx) based on the model of dynamic tabs Oracle shell. That is, the user must be able to work on the two tabs (loaded with the same workflow) independently.
  
  Problem scenario:
  I use model Oracle Dynamic tabs Shell in one of my .jspx page say default.jspx. This default.jspx is the entry point of my app via adfc - config.Xml.
  
  Tell my navigation menu a itemNode node1
  
  Node1-> corresponds to a stream of flow available1 (bounded task flows, with always create new scope txn)
  
  The navigation of the user I wanted to is as below:
  
  When the application is run default.jspx is loaded with above the navigation menu.
  (1) when the user clicks on node 1, it must open the stream in a dynamic tab available1 say tab1
  (2) when the user clicks on node 1 again, it must open the stream in another dynamic tab available1 say tab2
  The user must be able to work on the two tabs (loaded with the same workflow) independently.
  
  Question: When I tried the application above that I encounter the error below:
  Caused by: oracle.adf.controller.activity.ActivityLogicException: ADFC-00020: workflow ' / WEB-INF/flows/homeTF.xml#homeTF' requires a new transaction, but surgery is already open on the chassis.
  
  Thank you and best regards,
  Pramod Gujjeti

  Pramod salvation,

  Have you tried to set the attributes of your workflow Transaction? Open your workflow definition and then go to preview Tab. Change the appropriate attributes as defining the transaction as 'Always start new operation' or by unchecking the ' data controls share with calling workflow. Try to mix the settings and find the one that meet your needs.

  Kind regards
  Pino

• TDMS file creates several tabs data. You want to create only one.

  Hello NOR community,

  I am currently using the DAQ Assistant with my pots of chain record travel over a long time interval (see annex VI). I then use the vi "Write to a file as" to save the data in a file TDMS (see 'Write the file settings' photo attached for all the parameters chosen for the writing of the file). The file is written, however when I open the PDM file, the document creates a tab in Excel for every second of recorded data (please see attachment ""). It seems that the TDMS file is grouping all data every second, and then by creating a new group of data.

  How can I get the file to write all data on a single tab instead of creating multiple? I don't want to concatenate hundreds of tabs in a single great sheet.

  Thank you

  Chris

  You should not use the comment.  I just removed who and everything worked for me.

• How to create graphic tabs in front of Panel?

  How to create graphic tabs in front of Panel? How can I use tabbed indicators in the front panel?

  Drop a control tab on the front.

  Move a chart on a tab.  You can add multiple pages of tabs by clicking on the tabs.

• Cannot create the tab menu

  Hello

  I am trying to create a 'Menu of the tab' as described in

  http://developer.BlackBerry.com/native/documentation/Cascades/dev/ios_porting/mapping.html

  I want to hide the tabs and actionbar and try to implement showing on the sliding tab menu to the right!

  I am able to hide the tab menu! But cannot hide the actionbar! Please help me with that! Also, I want to know if it is possible to load the menu tab by code?

  I think that's the problem you describe

  You've created a tabbed pane and have the tabs stored in the overflow but want to hide the whole action bar("tabbedPane").
  

  I'm not posotive, but I am not belive this is possible, because the action bar is now the tabbed pane is the default component, which allows you to switch between tabs.   I have not noticed all the apps that hide the pane tabs, and I did not belive it would be consistent with the user B4BB interface instructions either.

• How to handle the onTriggered many ActionItem created dynamically

  Hi, I created the ActionItem dynamically using (loop)

  because data is from webservice

  How to handle the onTrigerred?

  If my code is like this:

  for (int i = 0; i)< alist.count();="">

  {

  My page page * = iRoot-->findChild ("SpecificObject");
  ActionItem * action = ActionItem::create () .title (aList [i] .name);

  bool res = QObject::connect (action, SIGNAL (triggered ()), this, SLOT (handleAction (())); what I'm confused because I don't know what action is triggered
  Q_ASSERT (res);
  Q_UNUSED (res);

  my page-> addAction (action, ActionBarPlacement:efault);

  }

  MyClass::handleAction() Sub

  {

  aFunction(); This parameter of function required of aList, said user.user aList [i]

  }

  Do I need to create handleAction() as well as added actionItem SLOT

  But I don't know how much action added because it is dynamic server

  Thank you

  There are a few options:

  Create a single location and connect all the signals. You can then call sender() into the slot to retrieve the object that sent the signal and go from there. You can also use a QSignalMap that maps each signal to a value and send this value to a single location. You can also use QSignalMap::sender() to get the sender object.

  I used the QSignalMap to do something similar for handling created dynamically successfully drop-down lists.

• How to create dynamic ObjectChoiceField?

  Hello friends,

  I want to create the search section for what I want to create dynamic choiceField. Tell me how to create that. I want 4 field of choice.

  Select the Continent-> Africa, Asia, Europe, America, South America, Antarctica, Oceania
  Select the country
  Select the region
  SELECT City

  here if I select Asia I want to show in the field of choice throughout Asia of County County, after that, if I sect Asia County I want to show all the area of that County and if I show a region that show the whole of the region. Than please tell how I do?

  It doesn't matter what Web service?

  How I do?

  you found NPES because obj_country is null.

  I think you can try with the recording of information in text files.

  String str_continent[]= new String[]{"Select Continent","Africa", "Asia", "Europe"," North America", "south America"," Antarctica","Oceania"};
  final ObjectChoiceField obj_Country=new ObjectChoiceField();
          obj_Country.setLabel("Countries");
  final ObjectChoiceField obj_continent=new                                                                                         ObjectChoiceField("Continent",str_continent){
           protected void fieldChangeNotify(int context) {
          if(getSelectedIndex()==2)
                  {
  InputStream in = getClass().getResourceAsStream("Asia.txt");
  String[] asianCountries =new  String[0];
  try {
  asianCountries = StringUtilities.stringToWords(new String(IOUtilities.streamToBytes(in)));
  } catch (IOException e) {
  e.printStackTrace();
  }
  
                      obj_Country.setChoices(asianCountries);}
  super.fieldChangeNotify(context);
              }
          };
  
          add(obj_continent);
          add(obj_Country);
  

• How to use PL/SQL to create dynamic action to set the value of a selection by another list?

  Hello

  I would like to know how to use PL/SQL to create dynamic action to set the value of a list of selection by another selection list.

  

  I wish can create dynamic action to manage the two above the Room select list (: P9_ROOM) and building (: P8_BUILDING).

  When you select "1074" in the bathroom, building highlights like "BRM BLD 5"

  When you select 'Area of the black box' in the room, building must assign the value "7 BLD BRM"

  When the room is Null, building should also be Null.

  I thank you,

  Alice

  I forgot to mention, for the PL/SQL Code, because you are working with items in the selection list, the return values are different from the display on your LOV values, you must instead use the return values.

  Thank you

  Erick

• Dynamic tabs

  See the CODE below.

  When the button is selected, the content below appears. Now what I want to do is to select the Home button to make them disappear. How is that possible?

  <! DOCTYPE html >

  < html lang = "en" >

  < head >

  < title > Bootstrap case < /title >

  < meta charset = "utf-8" >

  < meta name = "viewport" content = "width = device-width, original scale = 1" >

  " < link rel ="stylesheet"href =" http://MaxCDN.bootstrapcdn.com/bootstrap/3.3.6/CSS/bootstrap.min.CSS ">

  " < script src =" https://AJAX.googleapis.com/AJAX/libs/jQuery/1.12.0/jQuery.min.js "> < / script > .

  " < script src =" http://MaxCDN.bootstrapcdn.com/bootstrap/3.3.6/js/bootstrap.min.js "> < / script > .

  < / head >

  < body >

  < div class = "container" >

  Dynamic tabs < h2 > < / h2 >

  < ul class = "nav tabs-nav" >

  < li > < a data toggle = "tab" href = "#home" > home < /a > < /li >

  < li > < a data toggle = "tab" href = "#menu1" > Menu 1 < /a > < /li >

  < li > < a data toggle = "tab" href = "#menu2" > Menu 2 < /a > < /li >

  < li > < a data toggle = "tab" href = "#menu3" > Menu 3 < /a > < /li >

  < /ul >

  < div class = "Content tab" >

  < div id = 'home' class = "tab-pane" bland >

  < H3 > HOME < / h3 >

  < p > Lorem ipsum dolor sit amet, 195kgs adipisicing elit, sed eiusmod tempor storage developed and pain ut magna aliqua. < /p >

  < / div >

  < div id = "menu1" class = "tab-pane" bland >

  1 menu < h3 > < / h3 >

  < p > Ut enim ad minim veniam, quis nostrud ullamco laboris nisi ut aliquip ex ea commodo computer practice. < /p >

  < / div >

  < div id = "menu2" class = "tab-pane" bland >

  2 menu < h3 > < / h3 >

  < p > Sed ut perspiciatis unde omnis iste natus error sit voluptatem accusantium doloremque laudantium, totam rem aperiam. < /p >

  < / div >

  < div id = "menu3' class ="tab-pane"bland >

  3 menu < h3 > < / h3 >

  < p > Aeacus ipsa quae ab illo inventore veritatis and almost architectural beatae vitae dicta sunt explicabo. < /p >

  < / div >

  < / div >

  < / div >

  < / body >

  < / html >

  Its been asked a zillion times:

  show/hide tabs "bootstrap" of twitter - JSFiddle

• The dynamic user interface shell: opening of the dynamic tabs

  I'm trying to implement the dynamic tabs using the ADF dynamic user interface Shell. After clicking on a link, a dynamic tab opens that displays a table. One of the attributes of this table is again a link and when you click on this link it should open a new tab dynamically. But when I'm clicking on this link attribute in the first tab, it gives a NullPointerException, the getCurrentInstance() in the tab context returns a null value. How can I solve this problem?

  I had similar requirements. Add the input parameter according to the flow of tasks which you try to call the other task from the link stream.

  Name: tabContext

  class: oracle.ui.pattern.dynamicShell.TabContext

  scope: #{pageFlowScope.tabContext}

  required: true

  This solves the problem.

• I want to open two different pdf documents and view them at the same time so I can read about everything by watching the other document.  I use Acrobat DC and whenever I open a document it creates a tab and I can only examine a document at a time.

  I want to open two different pdf documents and view them at the same time so I can read a whole watching the other document.  I use Acrobat DC and whenever I open a document, it creates a tab and I can only examine a document at a time. Is it possible to display two or more documents without having to toggle tabs?

  Don't think that will work, but you can drag the tab to a new window. Each window can have a set of tabs.