create indexes and internal error
Hi, I runCREATE INDEX idx_nu_account_id_ ON archost
(
acc_id ASC
)
tablespace ts_idx
/
so happen "ORA-00600: internal error code, arguments: [ksuloget2], [0xFDD1F948], 'this message; '
Also I during the exec select * archost then if record is going to get all the return even error why?
What version of Oracle?
What platform (OS)?
I found two problem reports to Oracle on this error. The two refer to an LMS > 1 and are Windows specific. If you are under Windows see Oracle support documents: 564784.1 and 5935415.
You can open a SR if the adjustment to see if there was a patch created. Otherwise, you can try using a smaller CMS framework.
HTH - Mark D Powell.
Tags: Database
Similar Questions
-
I work with Lightroom CC can´t: error in module and internal error
Hello. I have can´t work with Lightroom CC because it says error module and internal error. It can´t make or find the required folder. Help, please!
H Hillary,
I suggest you try the following steps:
1. quit Lightroom
2. open Finder: click on Go - Go to the folder and type ~/library
3 open the Application Support - Adobe
4 rename the folder Lightroom-Lightroom-old (by GetInfo - in respect of the name Extension of &)
5. start Lightroom again after that.
Let us know the results.
Thank you.
-
Hi all
I have created a new configuration of client and location. Now try to create IR and get below error.
----------------
Error: The tax calculation: the system cannot determine the geographic information for this place and cannot be derived from a tax jurisdiction. Please contact your system administrator.
--------------------
I've made a few changes by looking at Doc-ID 1385936.1 and community discussions.
Ran "Name geography program SEO" and the journal looks very good. No registration rejected.
+---------------------------------------------------------------------------+
From simultaneous program ' geo referencing worker name: 1'
Start 08/07/15 07:44:56
Treatment for the Table: HZ_LOCATIONS and run Type: ALL
Parameters: Country Code: U.S.
Use code: all THE
Location Id: NULL: location Id: null
Start date: NULL: End Date: NULL
Number of workers: 1
Total number of records of location of treaties: 7319
Number of records managed: 7319
Number of rejected records: 0
Name of georeferencing process completed successfully
+---------------------------------------------------------------------------+
But still, I get the same error during the creation of IR
Someone help me please by looking in the uploaded screenshots. Incase if any additional necessary information, pls let me know.
This is related planning tests for this customer, I don't know about this part of the tax.
Any help is really appreciated. Thanks in advance.
Akshay
PS: This is not the sensitive customer data.
Hello Akshay,
Can you please follow the note Transaction Workbench error: System cannot determine your location for information
This location and cannot derive from a tax jurisdiction (Doc ID 438718.1) and see if that helps -
Creating indexes and a default tablespace
Hi Experts,
Need your help to understand a basic tablespace clause when creating any object.
I have a table owned by the user and reside on tuberculosis tablspace, table A has two indices i1 and i2, index i1 A user-owned and created by error index i2 belonging to user B.
index i1 resides on the tb_index tablespace, i2 index created by mistake lies also on same tablespace tb_index.
I have a question above given the scenario
I2 index that was created by mistake lies in tablespace tb_index, despite mentioning any tablespace clause. How it can be created on the tb_index tablespace when the developer did not mention the tablespace.
tablespace tb_index is neither database tablspace default is default not storage for user B.
No idea about this help me a lot.
Thank youMaybe something like that happening?
SQL> conn / as sysdba Connected. SQL> conn test/test Connected. SQL> select * from user_indexes; no rows selected SQL> select table_name, tablespace_name from user_tables; TABLE_NAME TABLESPACE_NAME ------------------------------ ------------------------------ TAB1 USERS SQL> conn / as sysdba Connected. SQL> grant create any index to system; Grant succeeded. SQL> conn system/oracle ERROR: ORA-28002: the password will expire within 7 days Connected. SQL> conn test/test Connected. SQL> revoke index on tab1 from system; Revoke succeeded. SQL> conn system/oracle ERROR: ORA-28002: the password will expire within 7 days Connected. SQL> create index tidx on test.tab1(a); Index created. SQL> set pagesize 9999 SQL> select index_name, table_name, tablespace_name, owner from all_indexes where table_name='TAB1' 2 ; INDEX_NAME TABLE_NAME ------------------------------ ------------------------------ TABLESPACE_NAME OWNER ------------------------------ ------------------------------ TIDX TAB1 SYSTEM SYSTEM
HTH
Aman... -
I have a tabular presentation. If I send the page I get a 500 internal error. If lines is set to 119, it works very well, if lines is set to 120 or above, I get a 500 internal error message.
He arrives on IE and Firefox.
I don't see obvious errors in the log of glassfish.
If there is a limit to how much I can present what is that limit? Is there a way to tell how a page is sent to the Web server? With all the tables in tabular forms send a lot on the server.
Sounds like a limit of app server. I know that in Apache the default limit is 2000 fields, so if each line of your 17 fields then you have reached the limit.
I guess that Glassfish has something similar. Here is a related discussion
-
Attempt to create indexes, but in error. One may shower some knowledge.
Hello
Please let me know why I get this error when the index is created.
SQL > CREATE INDEX WEBSERVICES. DX_PSAR_POL_TERM_PARTY_01 ON WEB SERVICES. PSAR_POL_TERM_PARTY
2 (FULL_NM)
3 INDEXTYPE IS CTXSYS. FRAMEWORK
4 SETTINGS ("SYNC (ON COMMIT)" ")
5 NOPARALLEL;
CREATE INDEXES WEBSERVICES. DX_PSAR_POL_TERM_PARTY_01 ON WEB SERVICES. PSAR_POL_TERM_PARTY
*
ERROR on line 1:
ORA-29855: an error has occurred in the execution of routine ODCIINDEXCREATE
ORA-20000: Oracle text error:
DRG-50857: error oracle in drvxtab.create_index_tables
ORA-01031: insufficient privileges
ORA-06512: at "CTXSYS. DRUE", line 160
ORA-06512: at "CTXSYS. TEXTINDEXMETHODS', line 366
==========================================================================This is [url http://download.oracle.com/docs/cd/E11882_01/text.112/e16593/cddlpkg.htm#g1014415] the package to control the use of the text index.
-
Get the error when creating indexes in RAC environment in 11 g
Hi all
I'm new concept CARS when creating index get below error
Error: AX_DISABLE_HIST - a SQL error. Position of the error: 0
Return: 12801 - ORA-12801: error reported in the P146, proceeding parallel query server
ORA-12853: insufficient memory for buffers PX: run 425904K,.
Max needed 11105280 K ORA-04031: unable to allocate 32792 bytes of memory ('', 'unknow shared pool
UNIQUE INDEX CREATE PS_AX_DISABLE_HIST WE PS_AX_DISABLE_HIST (EMPLID) TABLESPACE PSINDEX STORAGE
(MAXEXTENTS THEN 65536 40000 INITIAL UNLIMITED PCTINCREASE 0) PCTFREE 10 NOLOGGING PARALLEL
am not able to understand, it's this problem is related to the index or sga memory. can any time help me on that.
Thanks in advance
Prabhakar
Published by: 889571 on May 16, 2013 07:41You probably need SGA more because you have a lot of Parallels/slave servers in your instance. I see that you have at least 146. How many processors do you have? Do you need so many parallel servers?
Lordane Iotzov
-
Hello
I think I found the problem to which there is no solution. Lucky white Heather. This happens just as I'm building a site to which I'm now uploading - Smugmug.
Publish the services in Lightroom: internal error? : 0:attempt to index field 'export setings' (value zero). On the 64-bit windows 10 platform: desktop. I uninstalled and reinstalled Lightroom (x 3), uninstalled and reinstalled the plugins etc, etc. Anyone with a real solution?
Help
Andrew
Hi André,.
See this similar thread: 'Services to publish' question in Lightroom
Kind regards
Claes
-
Error messages when you try to open LR of CC.
An internal error has occurred.
Could not create the necessary folders:
MyUserName/users / / Library/Application Support/Adobe/Lightroom/develop presets
AND
An error occurred when attempting to change modules
Please see if the solution posted here helps: could not create the required folder
-
I just bought, installed and registered 6 Lightroom. When I try to launch the product I get a message that says "an internal error has occurred" - could not create the required file: admin/Users / / Library/Application Support/Adobe/Lightroom/Filter Presets. Any ideas on how I can fix this?
Hi Anthony,.
You must go to the location: admin/Users / / Library/Application Support/Adobe/Lightroom
Hold down the CTRL key and click on Lightroom, click on read the information and click the permissions tab.
Provide the permissions to read and write to your identifier and then close.
Then reopen Lightroom. You should be able to open Lightroom.
Please let us know if it helps.
Kind regards
Tanuj
-
Hello. I have the CC of LR 2015 version. It downloads fine, but when I try to open the application, I get a message saying: "an internal error has occurred" and "could not create the required folder: / users/celinserbo/library/application support/adobe/lightroom/develop presets." I tried disconnecting and then signing unistalling the app and back in and resettlement. nothing seems to work. any help would be appreciated.
Cannot create the folder means that you don't have WRITE permission for this folder. Then... change your permissions.
-
Windows movie maker error - the file is not indexed and cannot be imported
I have converted a quicktime in WMW clip, but when I try and import the video in windows movie maker, that it comes up with error the file is not indexed and cannot be imported? What does that mean?
Try another converter.
There are to many converters available on the net...
the following links are some examples.Proceed at your own risk *.
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)(1) format Factory (freeware)
http://www.videohelp.com/tools/Format_Factory
(the 'direct link' is faster)
(the file you want to download is: > FFSetup270.zip<>
(FWIW... installation..., you can uncheck
('all' boxes on the last screen)
(Windows XP / Vista / 7)First, you will need to decompress the file or just open the
Drag FFSetup270.exe out of the folder
and drop it on your desktop. To install left click.(2) Freemake Free Video Converter (freeware)
http://www.Freemake.com/free_video_converter/
(Windows XP / Vista / 7)(3) Koyotesoft Free Video Converter
http://www.koyotesoft.com/indexEn.html
(2000/XP/2003/Vista/Seven)(4) Sothink Free Video Converter
http://www.Sothinkmedia.com/video-converter/
(Windows XP / Vista / 7)(5) SUPER © Simplified Universal Player Encoder & Renderer
http://www.videohelp.com/tools/Super
(the download mirror site is faster) (Windows XP / Vista / 7)(6) Xilisoft Video Converter
http://www.Xilisoft.com/video-converter.html
(not freeware but receives good reviews)
(Windows XP (SP2 or later) / Vista / 7) -
Cannot create the image of the system due to an internal error
Widows 7 cannot create an image system due to an internal error.
What should do?
Original title: the system image
Hello
Please contact Microsoft Community.
I understand that you can not create the system image.
I will definitely help you with this.
What is the exact error of the internet you found?
I suggest that you go through the links below:
Refer to the suggestion given by Shubham Chaubey said may 17, 2016:
I hope this helps. Please post back with the State of the question and we will be happy to help you further.
-
Impdp ORA-39083 error: INDEX could not create with object type error:
Hi Experts,
I get the following error when importing schema HR after a fall it. The DB is r12.1.3 11.2.0.3 & ebs
I did export with this command.
patterns of HR/hr = hr = TEST_DIR dumpfile = HR.dmp logfile directory expdp = expdpHR.log statistics = none
that the user HR with the option drop waterfall.
And try to import it HR schemas in the database by the following.
Impdp System/Manager schemas = hr = TEST_DIR dumpfile = HR.dmp logfile directory = expdpHR.log statistics = none
Here is the error
imported 'HR '. "" PQH_SS_PRINT_DATA "0 KB 0 rows
... imdoor 'HR '. "" PQH_TJR_SHADOW "0 KB 0 rows
. . imported 'HR '. "" PQH_TXN_JOB_REQUIREMENTS "0 KB 0 rows
. . imported 'HR '. "" PQH_WORKSHEET_BUDGET_SETS_EFC "0 KB 0 rows
. . imported 'HR '. "" PQH_WORKSHEET_DETAILS_EFC "0 KB 0 rows
. . imported 'HR '. "" PQH_WORKSHEET_PERIODS_EFC "0 KB 0 rows
. . imported 'HR '. "" PQP_ALIEN_TRANSACTION_DATA "0 KB 0 rows
. . imported 'HR '. "" PQP_ANALYZED_ALIEN_DATA "0 KB 0 rows
. . imported 'HR '. "" PQP_ANALYZED_ALIEN_DETAILS "0 KB 0 rows
. . imported 'HR '. "" PQP_EXCEPTION_REPORTS_EFC "0 KB 0 rows
. . imported 'HR '. "" PQP_EXT_CROSS_PERSON_RECORDS "0 KB 0 rows
. . imported 'HR '. "" PQP_FLXDU_FUNC_ATTRIBUTES "0 KB 0 rows
. . imported 'HR '. "" PQP_FLXDU_XML_TAGS "0 KB 0 rows
. . imported 'HR '. "" PQP_GAP_DURATION_SUMMARY "0 KB 0 rows
. . imported 'HR '. "" PQP_PENSION_TYPES_F_EFC "0 KB 0 rows
. . imported 'HR '. "" PQP_SERVICE_HISTORY_PERIODS "0 KB 0 rows
. . imported 'HR '. "" PQP_VEHICLE_ALLOCATIONS_F_EFC "0 KB 0 rows
. . imported 'HR '. "" PQP_VEHICLE_DETAILS_EFC "0 KB 0 rows
. . imported 'HR '. "" PQP_VEHICLE_REPOSITORY_F_EFC "0 KB 0 rows
. . imported 'HR '. "" PQP_VEH_ALLOC_EXTRA_INFO "0 KB 0 rows
. . imported 'HR '. "" PQP_VEH_REPOS_EXTRA_INFO "0 KB 0 rows
Processing object type SCHEMA_EXPORT/TABLE/SCHOLARSHIP/OWNER_GRANT/OBJECT_GRANT
Processing object type SCHEMA_EXPORT/TABLE/SCHOLARSHIP/CROSS_SCHEMA/OBJECT_GRANT
Object type SCHEMA_EXPORT/TABLE/COMMENT of treatment
Object type SCHEMA_EXPORT/PACKAGE/PACKAGE_SPEC of treatment
Processing object type SCHEMA_EXPORT/PACKAGE/COMPILE_PACKAGE/PACKAGE_SPEC/ALTER_PACKAGE_SPEC
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
Processing object type SCHEMA_EXPORT/TABLE/INDEX/FUNCTIONAL_INDEX/INDEX
Object type SCHEMA_EXPORT/TABLE/CONSTRAINT/treatment
Object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS of treatment
Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/FUNCTIONAL_INDEX/INDEX_STATISTICS
Object type SCHEMA_EXPORT/PACKAGE/PACKAGE_BODY of treatment
Object type SCHEMA_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT of treatment
Object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS treatment
Processing object type SCHEMA_EXPORT/TABLE/INDEX/DOMAIN_INDEX/INDEX
ORA-39083: Type what INDEX failed to create object error:
ORA-29855: an error has occurred in the execution of routine ODCIINDEXCREATE
ORA-20000: Oracle text error:
DRG-50857: error oracle in drvxtab.create_index_tables
ORA-00959: tablespace "APPS_TS_TX_IDX_NEW" does not exist
Because sql is:
CREATE INDEXES ' HR'.»» IRC_POSTING_CON_TL_CTX' ON 'HR '. "" INDEXTYPE IRC_POSTING_CONTENTS_TL "("NAME") IS"CTXSYS. "' CONTEXT ' PARALLEL 1
Processing object type SCHEMA_EXPORT/POST_SCHEMA/PROCACT_SCHEMA
Work 'SYSTEM '. "" SYS_IMPORT_SCHEMA_01 "completed with error (s 1) at 11:16:07
SQL > select count (parameter), object_type from dba_objects where owner = 'HR' group by object_type.
OBJECT_TYPE COUNT (OBJECT_NAME)
------------------ -------------------
INDEX 37 PARTITION
SEQUENCE OF 799
TABLE 12 PARTITION
LOB 70
4 BODY PACKAGE
PACKAGE OF 4
3 RELAXATION
2936 INDEX
TABLE OF 1306
Could you please suggest.
Thank you
MZ
MZ,
I get the following error when importing schema HR after a fall it. The DB is r12.1.3 11.2.0.3 & ebs
Export and import of individual patterns of Oracle E-Business Suite stocked are not supported as this will violate referential integrity (except for custom schemas provided, you have no dependencies).
Thank you
Hussein
-
Hi all
Running the following:
Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
PL/SQL Release 11.2.0.2.0 - Production
"CORE 11.2.0.2.0 Production."
AMT for IBM/AIX RISC System/6000: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
Create a view of a relational table and XMLTABLE and extract nodes from voluminous of the xmltable, mapped text using COLUMNS. I concatenate the text nodes in an xml element in the XQuery xmltable, simple sequencing:
<CONTENT> {$i/summary/text(),$i/know/text(),$i/considerations/text(),$i/look_for/text(), $i/nc//text(),$i/level1//text(),$i/level2//text(),$i/ipocc//text()} </CONTENT>
SQLDeveloper query execution and right on when I scroll the 50th outcome accordingly set or... DB connection is closed and stack following error appears:
[ORA-00600: internal error code, arguments: [qmcxeExUseLoc93], [], [], [], [], [], [], [], [], [], []]
00600 00000 - "internal error code, arguments: [%s], [%s], [%s], [%s], [%s], [%s], [%s], [%s] '.
* Cause: It's the generic internal error for Oracle program number
exceptions. This indicates that a process has encountered a
Exceptional condition.
* Action: Report as a bug - the first argument is the internal error number
I went site Oracle Support to use the 'search' for these types of errors, but he found nothing to the argument: "qmcxeExUseLoc93"... any ideas short of opening an SR with Oracle support? S/n reports that no problems with memory or tablespace... trace files report a stack trace is complete:
[ORA-00600: internal error code, arguments: [qmcxeExUseLoc93], [], [], [], [], [], [], [], [], [], []]
= Dump for incident 32114 (ORA 600 [qmcxeExUseLoc93]) =.
2014-04-08 07:31:51.369
dbkedDefDump(): from the default crash dumps (flags = 0x2, level = 3, mask = 0 x 0)
-Run SQL statement for the current session (sql_id = 0qn4zxr0stgjh).
SELECT ID, CONTENT of ort_active_content_en_vw
-Call trace stack memory-
call call entered the argument values in hex
location point type (? means dubious value)
-------------------- -------- -------------------- ----------------------------
skdstdst () + 40 bl 107ca 9980 FFFFFFFFFFD99A8? 000002004?
000000001? 000000003?
000000000? 000000002?
000000001? 000000000?
ksedst1 () + 104 call skdstdst() FFFFFFFFFFD89B0? 000002004?
110641000? 1098C 1164?
110641000? 000000000?
FFFFFFFFFFD8AE0? 700000007?
ksedst () + 40 call ksedst1() 3030000000000? 002050033?
1098C 1158? 700000000025C?
000000000? 000000000?
1098C07B8? 000000000?
dbkedDefDump (+ 2828) call ksedst() FFFFFFFFFFD8B90? 000000000?
000000000? 000000000?
000000000? 000000000?
000000000? 300000003?
…….
-Binary stack dump-
= FRAME [1] (skdstdst () + 40 - > 107ca 9980) =.
defined by pointers frame 0xffffffffffd88b0 and 0xffffffffffd8840
CALL TYPE: bl ERROR REPORTED: no COMPONENT: (null)
0xffffffffffd8840 to 0xffffffffffd88b0 memory dump
FFFFFFFFFFD8840 0FFFFFFF FFFD88B0 42422220 098C 1158 [...] BB '... X]
08EBE70C FFFFFFFFFFD8850 00000001 00000001 10641000 [... d..]
FFFFFFFFFFD8860 00000000 00000000 0FFFFFFF FFFD89E8 [...]
FFFFFFFFFFD8870 0FFFFFFF FFFD99A8 00000000 00002004 [...].
FFFFFFFFFFD8880 00000003 00000000 00000000 00000001 [...]
FFFFFFFFFFD8890 00000000 00000000 00000000 00000002 [...]
FFFFFFFFFFD88A0 00000000 00000001 00000000 00000000 [...]
= SETTING [2] (ksedst1 () + 104-> skdstdst()) =.
defined by pointers frame 0xffffffffffd89b0 and 0xffffffffffd88b0
TYPE of CALL: call ERROR REPORTED: no COMPONENT: KSE
0xffffffffffd88b0 to 0xffffffffffd89b0 memory dump
FFFFFFFFFFD88B0 0FFFFFFF FFFD89B0 42422220 10317 68 A... 1zh BB"]
FFFFFFFFFFD88C0 1033F758 00000001 00000001 0014963C [... <...] 3.X]
FFFFFFFFFFD88D0 09ED0CA9 1873F04F 28422848 73743231... Sagna (B (Hst21]
FFFFFFFFFFD88E0 0FFFFFFF FFFD89B0 00000000 00002004 [...].
FFFFFFFFFFD88F0 00000001 00000001 10641000 098C 1164 [... d...d]
FFFFFFFFFFD8900 00000001 10641000 00000000 00000000 [... d...]
……
-Status of the Dump process (2).
===================================================
STATE OF THE PROCESS
-------------
Global information process:
process: 0x700000012b18de8, call: 0x70000000b880ee0, xact: 0x0, curses: 0x700000012bf11f0, usrses: 0x700000012bf11f0
in_exception_handler: no
----------------------------------------
SO: 0x700000012b18de8, type: 2, owner: 0x0, flag: INIT /-/-/ 0x00 if: 0 x 3 c: 0 x 3
proc = 0x700000012b18de8, name = process, queue = ksu.h LINE: 12451 ID:, pg = 0
(process) Oracle pid:42, ser:153, called heart/high: 0x70000000b880ee0/0x70000000b880ee0
flags: (0x0).
Flags2: (0 x 800), flags3: (0x0)
Intr error: call error 0,: 0, sess error: error of txn, 0, 0
queue intr: vacuum
ksudlp FALSE to the location: 0
(post info) last message received: 0 0 0
Last message received-card: no post
last process affect me: no
Last message sent: 0 0 26
Last message sent-map: ksa2.h LINE: 282 ID:ksasnd
last process posted by me: 6 1 700000012af9058
(info from latch) wait_event = 0 bits = 0
Process group: by DEFAULT, proc pseudo: 0x700000012b4db88
Info of the o/s: user: tst214, duration: UNKNOWN, ospid: 4370650
OSD pid Info: Unix process pid: 4370650, image: oracle@mldb2385
----------------------------------------
SO: 0x700000010430ba0, type: 10, owner: 0x700000012b18de8, flag: INIT /-/-/ 0x00 if: c: 0x1 0x1
proc = 0x700000012b18de8, name = FileOpenBlock, leader is ksfd.h LINE: 6337 ID:, pg = 0
(FOB) flags = 2050 fib = 700000010de3758 incno = 0 waiting for IO cnt = 0
fname=/tst214_01/oradata/TST214/temp01.dbf
FNO = 201 lblksz = 8192 fsiz = 36608
----------------------------------------
SO: 0 x 700000010430578, type: 10, owner: 0x700000012b18de8, flag: INIT /-/-/ 0x00 if: c: 0x1 0x1
proc = 0x700000012b18de8, name = FileOpenBlock, leader is ksfd.h LINE: 6337 ID:, pg = 0
(FOB) flags = 2050 fib = 700000010de2b40 incno = 0 waiting for IO cnt = 0
fname=/tst214_03/oradata/TST214/ort_data01.dbf
FNO = 6 lblksz = 8192 fsiz = 25600
----------------------------------------
SO: 0x70000001042ff38, type: 10, owner: 0x700000012b18de8, flag: INIT /-/-/ 0x00 if: c: 0x1 0x1
proc = 0x700000012b18de8, name = FileOpenBlock, leader is ksfd.h LINE: 6337 ID:, pg = 0
(FOB) flags = 2050 fib = 700000010de1310 incno = 0 waiting for IO cnt = 0
fname=/tst214_01/oradata/TST214/sysaux01.dbf
FNO = 2 lblksz = 8192 fsiz = 89600
----------------------------------------
SO: 0x70000001042f910, type: 10, owner: 0x700000012b18de8, flag: INIT /-/-/ 0x00 if: c: 0x1 0x1
proc = 0x700000012b18de8, name = FileOpenBlock, leader is ksfd.h LINE: 6337 ID:, pg = 0
(FOB) flags = 2050 fib = 700000010de0d10 incno = 0 waiting for IO cnt = 0
fname=/tst214_01/oradata/TST214/System01.dbf
FNO = 1 lblksz = 8192 fsiz = 96000
----------------------------------------
SO: 0x700000012bf11f0, type: 4, owner: 0x700000012b18de8, flag: INIT /-/-/ 0x00 if: 0 x 3 c: 0 x 3
proc = 0x700000012b18de8, name = session, lead = ksu.h LINE: 12459 ID:, pg = 0
(session) sid: 41 ser: 1263 trans: 0x0, creator: 0x700000012b18de8
indicators: (0 x 8000045) USR /-flags_idl: (0 x 1) BSY /-/ - /-/ - / -.
Flags2: (0 x 40008) - / -.
DID:, DID in the short term:
TXN branch: 0x0
Oct: 3, prv: 0, sql: 0x70000000c59dbd0, psql: 0x70000000b196c38, user: 73/ORT_READ
ksuxds FALSE to the location: 0
name of the service: the USERS of SYS$
Customer details:
Info of the o/s: user: norman.jonker, duration: unknown, ospid: 6224
machine: G4021165 program: SQL Developer
application name: SQL Developer, hash value = 1012150930
Battery active waiting:
No waiting; last waiting ended 2,617517 sec ago
Wait state:
fixed_waits = 0 flags = 0 x 21 limit = 0 x 0 /-1
History of waiting for session:
elapsed time of 2,617552 sec from last wait
0: waiting for 'direct path read '.
number = 0 x 6, first s/n = 0 x 2901, block cnt = 0 x 2
wait_id = 2222 seq_num = 2223 snap_id = 1
wait time: snap = 0,000035 s, exc = 0,000035 s, total s = 0,000035
wait time: max = infinite
wait charges: calls = 0 os = 0
After 0,029003 seconds time elapsed
1: expected "asynch descriptor resize.
#aio in circulation = 0 x 0, the current limit of aio = 0xc8, this capping aio = 0 x 145
wait_id = 2221 seq_num = 2222 snap_id = 1
wait time: snap = 0,000003 s, exc = 0,000003 s, total s = 0,000003
wait time: max = 307445734561 min 49sec
wait charges: calls = 0 os = 0
After 0,000710 seconds time elapsed
"2: expected ' SQL * Net message to client"
pilot-id = 0 x 54435000, #bytes = 0 x 1, = 0x0
wait_id = 2220 seq_num = 2221 snap_id = 1
wait time: snap = 0,000005 dry, exc = 0,000005, total = 0,000005 sec
wait time: max = infinite
wait charges: calls = 0 os = 0
After 0,001452 seconds time elapsed
3: expected ' SQL * Net client message'
pilot-id = 0 x 54435000, #bytes = 0 x 1, = 0x0
wait_id = 2219 seq_num = 2220 snap_id = 1
wait time: snap = 0,499033 s, exc = 0,499033 s, total s = 0,499033
wait time: max = infinite
wait charges: calls = 0 os = 0
After 0,000034 seconds time elapsed
"4: expected ' SQL * Net message to client"
pilot-id = 0 x 54435000, #bytes = 0 x 1, = 0x0
wait_id = 2218 seq_num = 2219 snap_id = 1
wait time: snap = 0,000003 s, exc = 0,000003 s, total s = 0,000003
wait time: max = infinite
wait charges: calls = 0 os = 0
After 0,000048 seconds time elapsed
5: expected ' SQL * Net client message'
pilot-id = 0 x 54435000, #bytes = 0 x 1, = 0x0
wait_id = 2217 seq_num = 2218 snap_id = 1
wait time: snap = 0,061319 s, exc = 0,061319 s, total s = 0,061319
wait time: max = infinite
wait charges: calls = 0 os = 0
After 0,000028 seconds time elapsed
"6: expected ' SQL * Net message to client"
pilot-id = 0 x 54435000, #bytes = 0 x 1, = 0x0
wait_id = 2216 seq_num = snap_id 2217 = 1
wait time: snap = 0,000003 s, exc = 0,000003 s, total s = 0,000003
wait time: max = infinite
wait charges: calls = 0 os = 0
After 0,000048 seconds time elapsed
7: expected ' SQL * Net client message'
pilot-id = 0 x 54435000, #bytes = 0 x 1, = 0x0
wait_id = 2215 seq_num = 2216 snap_id = 1
wait time: snap = 0,063435 s, exc = 0,063435 s, total s = 0,063435
wait time: max = infinite
wait charges: calls = 0 os = 0
After 0,000045 seconds time elapsed
"8: expected ' SQL * Net message to client"
pilot-id = 0 x 54435000, #bytes = 0 x 1, = 0x0
wait_id = 2214 seq_num = 2215 snap_id = 1
wait time: snap = 0,000003 s, exc = 0,000003 s, total s = 0,000003
wait time: max = infinite
wait charges: calls = 0 os = 0
After 0,000070 seconds time elapsed
9: expected ' SQL * Net client message'
pilot-id = 0 x 54435000, #bytes = 0 x 1, = 0x0
wait_id = 2213 seq_num = 2214 snap_id = 1
wait time: snap = 0,060780 s, exc = 0,060780 s, total s = 0,060780
wait time: max = infinite
wait charges: calls = 0 os = 0
After 0,000030 seconds time elapsed
The Session history sampled session 1263 series 41
---------------------------------------------------
History of the sampled session is built by sampling
the session target all the 1 second. The sampling process
capture to each sample, if the session is in an active waiting.
a wait inactive, or not in a wait. If the session is in a
active wait interval then one is indicated for all samples
the session was in the same active waiting. If the
session is in an inactive waiting or not waiting for
consecutive samples then one interval is indicated for all
consecutive samples. If we post these consecutive
samples in a single interval session may NOT be permanently
inactive or not in a wait (the sampling process is unclear).
The history is displayed in reverse chronological order.
sampling interval: 1 s, max 120 sec history
---------------------------------------------------
[3 samples, 07:31:51 - 07: 31:53]
not waiting at each sample
[18 samples, 07:31:33 - 07: 31:50]
waiting in each sample slowed
[2 samples, 07:31:31 - 07: 31:32]
not waiting at each sample
[42 samples, 07:30:49 - 07:31:30]
waiting in each sample slowed
[4 biopsies, 07:30:45 - 07: 30:48]
not waiting at each sample
[7 samples, 07:30:38 - 07: 30:44]
waiting in each sample slowed
[sample 1, 07:30:37]
waited for ' SQL * Net break/reset for customer ', seq_num: 1149
P1: 'driver id' = 0 x 54435000
P2: 'pause '? = 0 x 0
P3: "= 0x0
time_waited: 0,013444 sec (sampling interval: 0 sec)
[14 samples, 07:30:23 - 07: 30:36]
waiting in each sample slowed
[4 biopsies, 07:30:19 - 07: 30:22]
not waiting at each sample
[26 samples, 07:29:53 - 07:30:18]
waiting in each sample slowed
---------------------------------------------------
History of the sampled plenary:
longest_non_idle_wait: ' SQL * Net break/reset for customer '
[sample 1, 07:30:37]
time_waited: 0,013444 sec (sampling interval: 0 sec)
---------------------------------------------------
the temporary object counter: 2
----------------------------------------
Virtual discussion:
kgskvt: 700000011f06658, sess: 700000012bf11f0 sid: 41 ser: 1263
VC: 0, proc: 700000012b18de8, id: 41
News consumer group: OTHER_GROUPS (upd? 0) maps: DEFAULT_CONSUMER_GROUP, orig:
vt_state: 0x100, vt_flags: 0xA030, blkrun: 0, numa: 1
inwait: 0
place where last insched series: kgskthrrun
place where insched last reset: kgskthrrun2
place where inwait the last value: NULL
place where inwait last reset: kgskbindfast
is_assigned: 1, in_sched: 0 (0)
QCLs: 0, qlink: FALSE
vt_active: 0 (pending: 1).
vt_pq_active: 0, dop: 0
used quanta: 0 (cg: 0) usec, num penalty: 0
start of CPU time: 0
idle time: 0, time: 0 (cg: 0)
yields of processor: 0 (cg: 0), expected: 0 (cg: 0), wait time: 0 (cg: 0) usec
e/s expected: 0 (cg: 0), wait time: 0 (cg: 0) usec
ASL in queue wait times: 0, time: 0 (NEWS 0, 0 cg)
PQQ in queue wait times: 0, time: 0 (NEWS 0, 0 cg)
Violation of the time to wait in queue: 0
aborted calls: 0, num is exec hit limit: 0
Cancel current: max k 0: 0 k
I/O credits: small = 0 General = 0
I/O waiting credits: small = 0 General = 0
KTU Session Commit Cache Dump for IDLs:
XID: 0x0009.008.00002025 RCS: flg 0x0000.00cd4e90 = 0x1
XID: 0x0006.018.00001f5a RCS: flg 0x0000.00cd4e90 = 0x1
XID: 0x0009.015.00002024 RCS: flg 0x0000.00cd4e90 = 0x1
XID: 0x0005.004.00001f30 RCS: flg 0x0000.00cd4e90 = 0x1
XID: 0x0006.021.000011ed RCS: flg 0x0000.00cd4e90 = 0x1
KTU Session Commit Cache Dump for Non-IDLs:
----------------------------------------
KKS - UOL used: 0 locks (used = 19, free = 3)
KGX atomic operation Log 70000000b30a840
Mutex 0 (0, 0) oper idn 0 NONE
Cursor Parent uid 41 DTS 4 w/h 7 slp 0
Oper = pt1 NONE = 0 pt2 pt3 0 = 0 =
PT4 = 0 = 0 = 0 stt u41
KGX atomic operation Log 70000000b30a890
Mutex 0 (0, 0) oper idn 0 NONE
parasite of the slp whr 6 table uid 41 DTS torrent 4 0
Oper = NONE pt1 = 70000000d1485e8 pt2 = pt3 148678 = 0 70000000d
PT4 = 0 = 0 = 0 stt u41
KGX atomic operation Log 70000000b30a8e0
Mutex 0 (0, 0) oper idn 0 NONE
FSO uid 41 DTS mutex 0 w/h 0 slp 0
KGX atomic operation Log 70000000b30a930
Mutex 0 (0, 0) oper idn 0 NONE
FSO uid 41 DTS mutex 0 w/h 0 slp 0
----------------------------------------
KGL - UOL SO Cache (total = 182, free = 107)
KGX atomic operation Log 70000000 b 045538
Mutex 0 (0, 0) oper idn 0 NONE
Library Cache uid 41 DTS 5 w/h 85 slp 0
Oper = 0 = 70000000b 227350 pt2 = pt3 = 0 70000000c5df180 pt1
PT4 = 0 = 0 = 0 ub4 pt5
KGX atomic operation Log 70000000 b 045590
Mutex (0, 0) 70000000c5b11d8 idn 69fd5d60 oper NONE
Library Cache uid 41 DTS 4 w/h 77 slp 0
Oper = pt1 pt2 70000000934fb60 0 = = 0 = 0 pt3
PT4 = 0 = 0 = 0 ub4 pt5
KGX atomic operation Log 70000000b0455e8
Mutex 0 (0, 0) oper idn 0 NONE
Library Cache uid 41 DTS 4 w/h 79 slp 0
Oper = 0 = 70000000b 225950 pt2 = pt3 = 0 70000000c382cb8 pt1
PT4 = 0 = 0 = 0 ub4 pt5
KGX atomic operation Log 70000000 b 045640
Mutex (0, 0) 70000000b225a80 idn ae8e84f6 oper NONE
Library Cache uid 41 DTS 4 w/h 70 slp 0
Oper = 0 = 70000000b 225950 pt2 = 0 = 0 pt3, pt1
PT4 = pt5 0 = 0 ub4 = 4
KGX atomic operation Log 70000000 b 045698
Mutex (0, 0) 70000000b225a80 idn ae8e84f6 oper NONE
Library Cache uid 41 DTS 4 w/h 70 slp 0
Oper = 0 = 70000000b 225950 pt2 = 0 = 0 pt3, pt1
PT4 = 0 = 0 = 0 ub4 pt5
KGX atomic operation Log 70000000b0456f0
Mutex 0 (0, 0) oper idn 0 NONE
Library Cache 41 DTS uid 0 w/h 0 slp 0
Oper = pt1 pt2 = pt3 0 = 0 0 = 0
PT4 = 0 = 0 = 0 ub4 pt5
KGX atomic operation Log 70000000 b 045748
Mutex 0 (0, 0) oper idn 0 NONE
Library Cache 41 DTS uid 0 w/h 0 slp 0
Oper = pt1 pt2 = pt3 0 = 0 0 = 0
PT4 = 0 = 0 = 0 ub4 pt5
KGL SO hide
SO = 70000000c5df180 link = 70000000c5df1f0 [70000000b115e38, b 70000000, 045520]
FLG = 8000 use its 700000012bf11f0 = 700000012bf11f0 =
SO = 70000000b115dc8 link = 70000000b115e38 [70000000c5df380, 70000000c5df1f0]
FLG = 8000 use its 700000012bf11f0 = 700000012bf11f0 =
SO = 70000000c5df310 link = 70000000c5df380 [70000000c7abab8, 70000000b115e38]
FLG = 8000 use its 700000012bf11f0 = 700000012bf11f0 =
Hello
I'm not saying that it will solve the problem, but you must use XMLCast in this case, not XMLSerialize.
Try also with fn:local - name instead (unless you need information namespace as well):
Select (xmlcast)
XMLQUERY)
"for $dcrContent in fn:collection("oradb:/PUBLIC/DATA_CAPTURE_RECORD_CONTENT") / ROW.
where $dcrContent/DATA_CAPTURE_RECORD_CONTENT_ID = xs:decimal ($id)
"return fn:local - name($dcrContent/CONTENT_XML/*)"
from 608 as "id".
contents of return
)
as varchar2 (100)
)
Double;
Maybe you are looking for
-
How can I connect an Apple TV to an analog TV with 2 RCA Sockets?
I have an analog TV with 2 jacks RCA - one for audio and one for video. Can I connect to an Apple TV box? Thank you.
-
Should I really Satellite A300?
I thought that I was the proud owner of an A300: Intel 2 x 2, 66 GHz, 4 GB, 2 x 500 GB HHD, ATI HD4650m 1 GB, 17 ". Try to find a driver for XP SATA, I noticed that all the Satellite has a short-series format as by PS_ * A * _ *. Mine is by PS_ * P *
-
This unit can perform a copy front and back on a pile of documents front / back, loaded in the ADF? (I know that it is able to copy both sides of a single page). In the list of options in control panel touch control for "duplex", it has classified 2
-
I have a Konica Minolta magicolor 2300DL on a private network. I have connected my HP Presario cq70 laptop to the network. It is running Vista Home Premium 32 bit. Can I print a page the printer integrated from my web browser, but I can't print anyth
-
Wen I try to load my game, I get the message cannot find suitable display device ive looking into my device manager and theres a yellow! next to my video card, I have a NVIDIA GeForce 8800GT I right click on it go into property, and he says that Wind