Create Oracle work with Task Scheduler

Similar Questions

• Get the player starts automatically with Task Scheduler

  Hello

  I don't believe this, or a similar one, the question was asked, so I hope I'm not repeating another thread :)

  I would like to program iTunes (or potentially any multimedia player) to start playing automatically every morning and mix all my music or a playlist - in other words I don't want to hear a song over and over again.

  I tried to implement a task in the Task Scheduler tasks and at the agreed time, the computer sounds like its trying to do something, the blue (instead of the classic mouse pointer) circle appears, but then nothing... though the Scheduler runs the task.

  I have a computer Dell laptop, Inspiron and Windows 8... would be great to do this work, any help is appreciated!

  Thanks in advance!

  This will vary depending on the media player program to use.  But the General method to do this is to set up a scheduled task that starts the program of the media player (.exe file) and also specifies what playlist to play.

  With Windows Media Player, it would look like this in the Task Scheduler (you can test the command by pressing on +R and put it in the box run).

  "%ProgramFiles% (x 86) %\Windows Media Player\wmplayer.exe" /play "c:\users\shawn\music\Playlists\MorningList.wpl".

  Note that this entire command on one line (it does not fit everything on this Web page).  Obviously, you'll need to adjust the location of the saved playlist file.

• Defragmenter will not work in Task Scheduler

  Defragmenter resets to 'never' after trying to set a schedule.  I put the calendar. Click all OK, but as soon as I close the Defragmenter, he returns to "never"and does not perform a defrag on schedule. "

  Have you tried typing Task Scheduler in the box start the SEARCH Menu and then right click on Task Scheduler in the list, by selecting the option "Run As Administrator" (you must know the administrator password)?  See if you can then make the changes.

  Defragmentation is running manually for you?

  Use the run as Administrator option to start a command prompt for these two examples of available additional details via a manual defragmentation.

  Disk Defragmenter
  http://www.windowsvistauserguide.com/disk_defragmenter.htm

  How to perform a manual defragmentation complete of your hard disk under Windows Vista
  http://www.howtohaven.com/system/vistadefragmentation.shtml

• problem with tasks scheduled on W2008 (physical) servers. We run W2008 R2 Standard.

  We have a task that runs a .bat file that takes backups offline to a database for a product of part 3.  Run us it everyday (except Sunday) so we have the setting of relaxation as weekly and mark all days except Sunday and run them at specified times (or it is our intention);

  .Bat file commands have been verified as correct by the 3rd party software vendor.

  If you run manually scheduled task (that is to say do a right click and run) it works and does what we want it to do.

  What we cannot operate constantly, it runs on a timed schedule. It works at the time and the first time, as it did successfully, the action subsequent times it works at the agreed time but shutsdown almost immediately after, it seems, made the first order in the .bat file that the database has been extinguished.

  We noticed that when it is not what we want, he said that he has successfully completed, but the status is not (0 x 1) (0x0), but we are unable to find clues in the history of task as to why.

  We tried two ways to call the .bat file:

  1. directly by briowsing in the file in the Actions tab field program/Script and then by filling in the path in the start menu in the field

  2. in referring to the cmd.exe file in the C:\Windows\System32 folder, and then put the following command in the \D:[path/c to the file beats] in the field add Arguments

  both behave the same way. Its very relative because this task is a task of office off and so impossible to manually run operationally, it must work outside office hours.

  We had this task that runs in W2003 years and we are trying to move to W2008 as part of a program to upgrade.

  Someone encountered this or know how to diagnose why its happening? We would really appreciate help.

  Hi Marc,

  The question you posted would be better suited on the TechNet forums.

  Please post the question here:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• 'For' the command line in the file Tab does not work in Task Scheduler

  I am able to do my work of script .bat with 'echo' and 'set' command in the file lines beats using raykor suggestion to put the .bat file in program/script and put the path in the field "start in". However, 'for' command line stops all other lines in order to run.  Please see the below script. Please help how to do the command line 'for' to work. I need to add the date and time for the name of the file/folder to keep track of a copy of the file on each day. This script works perfectly when I run a line by line at a time on the CMD command prompt. He copied the files and folders and gave me the date and time and concatenated to the name of the file/folder. The first 2 lines do not work. If I delete the first 2 lines, it works fine.

  for /f "Tokens = 1, 2, 3, 4 * Delims = /" %i IN ('date/t'), set dt = %i %k %%j
  for /f "Tokens = 1, 2 *" %i in (' / time t ") set tm = - %i %j
  Set tm = % tm: =-%
  set the TNT = % dt % % tm
  echo copy backup set: % of DTT.
  ECHO please wait...
  Robocopy s:\data2 d:\testBackup\data2 /e /mir /np /tee /log:"c:\users\myusername\desktop\backup_log.txt.
  echo of finishing.

  Hello

  I apologize for the delay in responding to this post.

  The query is better suited in the following TechNet Forum, asking to view the query to get a solution to this problem.

  http://social.technet.Microsoft.com/forums/en-us/home?Forum=iTCG

• Why my batch file does not run properly in Task Scheduler

  My .bat files do not work with Task Scheduler.

  For testing purposes, I created a very simple, one line .bat file:

  ECHO this is a test. > TestFile.txt

  If I run this file by double-clicking it, it works correctly and created a text with a single line of text document.

  But if I create a task to run this file, the text file is NOT created.  For the task history log, said that the task was started and completed successfully but no text file is created.

  Any thoughts?  Thank you.

  Thanks for the suggestion, but I solved my problem.

  It turns out that you can't use the full path to the .bat file in "Program/script" field of the Scheduler of tasks but rather than actual .bat file name, then the rest of the way in the field "start in".

• Event Viewer and Task Scheduler stop working

  I currently have problems with Task Scheduler and the event viewer.  Whenever I open and try to go in a "folder/hive" sub it crashes saying that MMC has stopped responding.

  Now, I tried to use SFC and I tried loading them up to display the MMC. EXE only. Neither of which work.  I tried several restarts and tried running a hotfix, but those who do not work or the other.

  Please could you help?

  As a 'solution' for some issues (not the main question), that's what I had to do:

  Make a fix of the diagnostic system

  First thing I did was run the tool is located at: Microsoft Technical Support

  To help what I can run the tool and used the patches for the problems of two shown, each question can back it up with 2 problem areas, of which only 1 (in the section of windows update) not resolved.

  Run a windows update fixed service

  1. run the CMD commands below:

  net stop wuauserv

  net stop bits

  net stop cryptsvc

  Ren %systemroot%\System32\Catroot2 Catroot2.old

  Ren %systemroot%\SoftwareDistribution SoftwareDistribution.old

  Open the cmd

  2. create a batch file for fix / register some dll files:

  regsvr32 c:\windows\system32\vbscript.dll/s
  regsvr32 c:\windows\system32\mshtml.dll/s
  regsvr32 c:\windows\system32\msjava.dll/s
  regsvr32 c:\windows\system32\jscript.dll/s
  regsvr32 c:\windows\system32\msxml.dll/s
  regsvr32 c:\windows\system32\actxprxy.dll/s
  regsvr32 /s c:\windows\system32\shdocvw.dll
  regsvr32 c:\windows\system32\wuapi.dll/s
  regsvr32 wuaueng1.dll/s
  regsvr32 c:\windows\system32\wuaueng.dll/s
  regsvr32 c:\windows\system32\dllcache\wucltui.dll/s
  regsvr32 wups2.dll/s
  regsvr32 c:\windows\system32\wups.dll/s
  regsvr32 wuweb.dll/s
  regsvr32 Softpub.dll/s
  regsvr32 Mssip32.dll/s
  regsvr32 Initpki.dll/s
  regsvr32 softpub.dll/s
  regsvr32 wintrust.dll/s
  regsvr32 initpki.dll/s
  regsvr32 dssenh.dll/s
  regsvr32 rsaenh.dll/s
  regsvr32 gpkcsp.dll/s
  regsvr32 sccbase.dll/s

  regsvr32 slbcsp.dll/s
  regsvr32 cryptdlg.dll/s
  regsvr32 Urlmon.dll/s
  regsvr32 Shdocvw.dll/s
  regsvr32 Msjava.dll/s
  regsvr32 Actxprxy.dll/s
  regsvr32 /s of Oleaut32.dll
  regsvr32 Mshtml.dll /s
  regsvr32 msxml.dll/s
  regsvr32 msxml2.dll Kbps
  regsvr32 msxml3.dll/s
  regsvr32 Browseui.dll/s
  regsvr32 /s shell32.dll
  regsvr32 c:\windows\system32\wuapi.dll/s
  regsvr32 c:\windows\system32\wuaueng.dll/s
  regsvr32 wuaueng1.dll/s
  regsvr32 c:\windows\system32\dllcache\wucltui.dll/s
  regsvr32 c:\windows\system32\wups.dll/s
  regsvr32 wuweb.dll/s
  regsvr32 jscript.dll/s
  regsvr32 atl.dll/s
  regsvr32 Mssip32.dll/s

  For those who do not know how to do - open a Notepad, copy and paste the above content and save it as "WindowsUpdate.bat".

  Run this batch file

  3. in the command executes the commands below:

  net start wuauserv
  net start bits
  net start cryptsvc
  output

  4 run SFC/scannow in cmd once that has completed steps 1-3 new (including diagnostic tool).

  This allowed me to get the updates of windows working again.

• Task Scheduler tasks do not work after a reboot

  In windows 7 I used to have the error that other people get to the Task Scheduler that the task no longer exists. In any case, I have no more errors since the question based on advice on this forum to delete each task which does not exist in the Task Manager, but exists in the attachment folder. If the error that the task no longer exists does not.

  The problem is now task will run once, after that reboot a pc they rerun the habit. He said that the task is scheduled to run at 08:00 on Wednesdays of each week. But after that I restarted my pc it does not work yet. The next section begins to show nothing then.

  The task in services.msc schedule is set to automatic. I should also mention that the service does not seem to me to change if its auto, manual, other services. I believe that I am the admin, I am the only user of this computer, no accounts are put in place, its just me, and I never had problems with the admin.

  Forecasts of the tasks are not that difficult, after I corrected the error, I hoped that would be the end, but no, forecasts of the tasks still does not work, something so fundamental should not cause many headaches.

  Well looks like I found my answer, microsoft does not task scheduler does not work after restarting.

  Here is the original thread, I made mentioned, dealing with my first issue with Task Scheduler showing an error indicating that the tasks no longer exist. This thread has solved the problem that I no longer receive the error that the task no longer exists, but close to the last post on the thread below, someone explains the problem that I have now with the pc, not to remember to perform next time.

  This thread below will fill you in on everything I mention since Task Scheduler, defragment break Task Scheduler.

  And as one person on the States of thread at the end

  "Sorry, Joseph... but it is not the answer." Oh, Yes... you can recreate the tasks that are causing the problem (in my case, something like 25... Count em... 25. created by the system of tasks in Microsoft files). Everything seems fine. Restart now. BLAMMO. You're right back where you started.

  Microsoft: Task Scheduler in W7x64 is BROKEN. Horribly, undeniably BROKEN.  Acknowledge the problem and FIX this MESS. »

  It sums up my thoughts exactly.

  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/01e60fa1-8004-40b4-9cf0-247fb80edb56

• Can I run a service at regular intervals with the Windows Task Scheduler?

  Hai...

  I want to run a service on a regular basis. I was thinking about tasks windows schedular system. I want to know if it is possible to define the intervals of time explicitly windows Task Scheduler. I also want to know if we can choose a custom event if selected the option "when an event is logged. Your help will be very appreciated. Thanks in advance

  Hi SreedeviB,

  You can run a service at regular intervals with the Windows Task Scheduler.

  For more information, you can consult the following articles:

  Windows Vista Task Scheduler

  Schedule a task

  Automate tasks with Task Scheduler

  Hope this information is useful.

• Task Scheduler task shows as completed successfully, but nothing happened

  I have some .bat files I created added to my task scheduler on our server at the fire every day from 05:00.  Tasks run a series of SQL commands and a find and replace the application third for updating a MySQL database that we use for a web application.  SQL event on demand are not an option for us.

  When I run the task manually it works fine (I'm an administrator has full permissions), either by double-clicking the .bat file, either by selecting the task in the Task Scheduler task by clicking on 'run '.

  Tasks have been reportedly shot every day for more than a week and all history journals say the operation completed successfully, but when I check the MySQL database, that nothing has actually happened.

  To add to the confusion, what is happening on 2 3 .bat files that I wrote.  One works perfectly, not.

  I have the defined task to "Run if the user is logged in or not", and "Run with the highest privileges" and our server, Windows 2012 R2.

  My apologies if I'm missing something obvious, I am a JavaScript/PHP web developer, who was lifted in the server environment and, although most of this is logical on a base level for me, a lot of nuances are lost.

  Thanks in advance for any help.

  Hello

  Please post your request in the forum for better support.

  TechNet

  Thank you.

• Event Viewer/Task Scheduler error message

  I get the error message "MMC could not create the snap" in Task Scheduler and Event Viewer. I tried various things, including a reinstallation of the .NET Framework, and nothing seems to solve the problem. Does anyone have any suggestions?

  michiganjoe,
  Thank you for visiting the Microsoft Answers community forum.

  The first thing I would try is to run the System File Checker to see if any system files got corrupted:
  To run the System File Checker tool, follow these steps:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following line and press ENTER:
  sfc/scannow
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  If this does not work, we need a little more information, the better to help you.  What version of Vista are you using?  When exactly this error happen?  Is that what you see in the event viewer, or you get the error when you try to open the event viewer and Task Scheduler?
  Have changes made to your computer recently, as new hardware or installed software or an update / upgrade to software or drivers?  Have you tried to do a system restore to before the problem came first?
  To restore the operating system to an earlier point in time, follow these steps:
  Click Start, type system restore in the search box, and then click System Restore in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  In the System Restore dialog box, click on choose a different restore point and then click Next.
  In the list of restore points, click a restore point created before you started having the problem, and then click Next.
  Click Finish.
  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Let us know the status of your problem and if we can also provide assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• working with try & catch in CI

  Hi all

  I'm just working with one of the Community industry through the app engine. I'm just reading intermediate table and inserting tables by CI, Structure similar to the following

  While

  Try

  Code of the component Interface

  catch

  end - try

  end-while that

  Here during the loading - when I get an error AE goes to SUCCESS No. and rest lines will not get the treatment.

  How can I just jump the line of the error, write it in the log file and continue working with the remaining lines... ? I placed try and catch also.

  Thank you

  Ely.

  Ely - you are on the right track.

  To explain what 1000452 has suggested, you will need to browse the lines across lines using the index & I.

  You can also use the long of the same statement form as follows (alternative):

  field1 = & rs1. GetRow(&i).staging - table.field1.value;

  You can find good documentation PeopleBooks to create and work with the autonomous rowsets:

  https://docs.Oracle.com/CD/E38689_01/pt853pbr0/Eng/PT/tpcd/task_UsingStandaloneRowsets-074a72.html

• Problem when creating a report with a date of schduled

  When I tried to create a report with a schedule (any option except now) I get the error 'Date of the first report occur must be after or equal to the current date", unless I have use a date of 01-10-2012 or later in the first report occurs on the field.  Current date is 2012-08-23.

  Let me know if you can recreate it and if or when there is a fix.

  Hi Tim,.

  We have fixed the problem now. Could you please check that you are able to schedule a report now with start date of today?

  Thank you

  The OnPlus team

• Accidentally delete system restore on Task Scheduler calendar

  I tried to change the frequency to create a system restore point in the Task Scheduler. It is located in: Task Scheduler Library > microsoft > windows > system restore, but I accidentally delete the task (not the folder) and I don't know how to recreate. Can someone help me how to solve this problem or please post the correct setting of the task, so I can recreate it manually.

  Hi Aziz Fauzan,.

  Thanks for posting in the Microsoft Community.

  I understand that you are unable to create system restore on Task Scheduler calendar

  By default, System Restore will run as a scheduled task in Windows 7.

  1. open the Control Panel / Administrative Tools / Task Scheduler.

  2. expand Task Scheduler Library / Microsoft / Windows.

  3. scroll and select System Restore in the left pane.

  4. in the right pane, double click on the task of SR to open the configuration dialog box.

  5. click on the triggers tab.

  6. This displays the regular settings.

  7. using the buttons at the bottom of the dialog box, you can modify, delete or create a new scheduled time.

  See also:

  Schedule a task

  http://Windows.Microsoft.com/en-us/Windows7/schedule-a-task

  : http://support.microsoft.com/kb/939039/en-us (also applies to Windows 7)

• Task Scheduler works with scripts created in open Script?

  I am to evaluate whether the Script Open eTester 8.2 is needed. One consideration is that we use the Task Scheduler and it does not seem to recognize all of the scripts that I have recorded in open Script. I use Task Scheduler that comes with the download of the v9. I understand that I could use the new etester which is included with the v9 but I heard that product may disappear in the future and this open Script is his replacement. Rumor?
  
  Thanks for any help,
  Jeff

  Hello

  OFT installer contains the Task Scheduler and task scheduler does not come only as far as I know. When you try to perform a custom installation of the OATMEAL package wouldn't see you Task Scheduler as a separate entity. If this works with the OFT or etester.

  You can use the Oracle Test Manager to run and schedule jobs to open script.

  Thank you

  Published by: Openscript user 100 on November 17, 2009 20:47