Satellite L300 - 16L - Vista does not load

Similar Questions

• Satellite L300 - portable computer does not load

  Hello

  I just wanted to know roughly how much it should cost, or what can I do to fix my laptop. It does not load and I bought a new charger to see if it works but it started to load for a few days and then stopped working again.

  All responses will be apperciated, thank you.

  Hi DeeDee_1,

  If you have already bought a new charger and it doesn t work there seems to be a motherboard problem, but another part could be affected too

  Here he s just a user to user forum and nobody can tell you how much it would cost because a professional diagnosis is necessary. After that an authorized service provider can make you an offer on all repair costs.

  Then contact the guy and ask for help. They can give you a good answer ;)

• Satellite L300-PSLB8E battery does not load on XP

  Recently, I spent from Vista to XP. Installed all the drivers, I know from Toshiba Web site.

  However, I came across an annoying problem.
  My computer works perfrectly when the charger is connected, but the battery is ever upward.
  In other words, my computer shuts down seconds after I unplug the charger.

  Please don't tell me that my battery is dead, because it worked well on Vista.

  Any help much appreciated.

  Hello

  All I can imagine is that you need the BIOS update. If I remember well even on a satellite notebook fixed with the latest version of the BIOS update.

  Check it out! New BIOS update is available for your model of laptop also?

• Satellite L300 (PSLB8C-0H901X) does not work

  My laptop Toshiba Satellite L300 PSLB8C-0H901X, does not work, no power, no MESSAGE, nothing, lamp power and charge Get when pluged into anything else, any known issues? All the fixes, thank you in advance for your help.

  Of course, your laptop is completely dead. In such situation, there is no magic solution and I m afraid that you need professional help. If there is absolutely no reaction is maybe defective electronic power supply and the motherboard must be exchanged.

  As you know this is part more expensive so you need to check if this is the solution for you.
  Call, explain the situation and let it check your laptop.

• Vista does not load after that install Microsoft Update error the breakpoint of the exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.

  Original title: Vista does not load after you install Microsoft updates

  A Dell Inspiron. Updates have become available and have been installed. Next time the laptop was put on it does not start, it was all there on the screen was the dotted line down and after some time a black screen.
  I tried running the recovery and I get the message "the breakpoint exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.
  At the time that the laptop does not work and I have no idea what updates have been downloaded and installed.

  Hello

  Try the methods provided below and check if that helps.

  Method 1:

  Step 1:

  Try to boot in safe mode with network and check if you are able to boot to the desktop.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you are able to start the office try to download and run a system scan using the Microsoft Safety Scanner full and check if that helps.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  See also:

  How to remove a computer virus?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Method 2:

  Clean boot

  If the problem does not persist in safe mode you can also perform the clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  Try the system restore by using the System Recovery Options.

  The System Recovery Options menu is on the Windows installation disc. The menu can also be installed on your drive hard if your computer has preinstalled recovery options.

  For more information click on the link below.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Please keep us updated on the State of the question so that we can help you further.

• Urgent - Vista does not load

  OK, I guess I better start from the beginning. My computer came with Vista and I installed Xp with it only to remove it later. Once I took it off I tried to delete the windows startup menu, because he still had listed XP. I read on a website that I had to remove the c:\boot directory and this should solve the problem. Now vista does not load. It says "missing system32\hal.dll"

  I have the HP recovery disk, but I would lose all data. I have a copy of Vista, but it does not seem to be initiated. I can't cross the screen with the error message. Can anyone help?

  Hello

  Download Windows Vista Recovery Disc to correct and choose repair system.

• Satellite L300 - 1 9 does not start safe or normal mode

  Hello

  My computer does not load to the top of the security mode or normal mode.

  Although Macafee, my virus protection software provider believe their recent problems are to blame they have offered no solution and instead asked me to load windows with my "installation disk".

  I can't find it, where to do it? (p.s. my computer is the Satellite L300 - 9 1 series.

  Thanks in advance.

  Hello

  If you are not able to start Windows try first HARD drive recovery option:
  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

  If this does not work, you need the recovery disc you can order here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Why Windows Vista does not load user profile?

  When logging on it says unable to load the user profile, but the profile is there when I log in Administrator account, how do I recognize my account that I used to use? Everything worked fine until I went to reboot my Dell Vosstro 220, running Vista SP2 with all latest updates... He went to the Startup Repair, and after awhile, I was dirrected to restart the computer. When it restarted, it went to a temporary user profile named after one it starts normally, but there was 3-0 and temp after the profile. So the desktop icon were almost all gone and when you run a temp profile nothing is saved in it when you use... I've logged on to the administrator account and under C:\computer\users my account, I used to use with 2 temporary accounts. One was exactly like my normal account (mountain), but with temp000 after her. I went to Microsoft Answers and he said to go to regedit and find the profiles under machine\software\microsoft \windows NT\profiles and change the name of the supposely accounts 2 so it would not load the Temp account. I followed the instructions to a T and everything is OK except that now it does not load the Temp file, it just says: windows could not load the user profile. I have to hit Control, Alt, delete to bring up the Task Manager and then type Administrator and password that works very well. When I click on administrator, it displays the screen with all that on the computer. MountainMan used to be there under administrator, but he disappeared. If I go down to users in a subcatigory under computer and users it lists all of the accounts that I should be able to access. All the information is there, it doesn't seem right to see as an account profle to load up. I've always had it set to start on MountainMan account without password. Now it takes forever to load the administrator account. It must also be typed in each time instead of remember accounts. How can I get MountainMan load again? The info is there, but he doesn't seem to know the location more. Even when I type in MountainMan it just says unable to load the user profile. I don't know if typing in the name of the account is the same problem or if I have 2 problems. I appriciate any help to correct this situation. Also just FYI, I deleted temporary files after changing names, in which case they were confusing.

  Hi James,

  1. When you created a new user account, have you configured it as an administrator?

  2. When you connect to the old user profile you are able to view your data?

  You can check out the following link and check:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/how-do-i-change-folder-and-file-permissions/465f2b42-63dd-4486-8dd1-c870290efeed

  The above link contains third party links.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, please consult the following link:

  Troubleshoot "access denied" when opening files or folders

• Satellite A300 - Vista does not load, the computer does not start

  Satellite A300
  Model number: PSAGCA-02W010

  Vista won't load; have you tried to start repair; System Restore and boot in safe mode, none of them work. I get the error "error 0 x 80070570: the file or directory is corrupted and unreadable."

  I don't know what I did with my recovery CD; or if I even got one with my purchase (from Harvey Norman).

  Please tell us what can be done.

  Hello

  What you can try is to install Vista using disk HARD recovery option.
  How it works, you can read on http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  If it works all the data saved on the C partition will be deleted but the data saved on the D partition will always be there.

• Satellite A300 - 16L - Vista will not repair

  Hello

  I have a toshiba satellite A300 - 16L. And it must recover Vista.
  But he'll do.
  I tried the F8 key during startup, but that foesnot give me the recovery menu.
  I tried the solution key 0. But this does not work either.

  It remains startsup windows in a recovery status. And ends with a message (in Dutch): "Kan geinstalleerde niet het programma starten. Klik op OK als u wilt uitschakelen computer.

  I do however can start with a knoppix cd and see the entire disk. And I could save almost all the data.

  Can someone help here?

  eyes of Jan

  You have created DVDs of recovery following advice in the document s user manuals?
  If Yes use this support to reinstall the original Vista recovery image.
  Is preinstalled original Toshiba Vista or your own installation?

  By the way: I have the same machine and I use Win7 32 bit. It works perfectly on the A300.

• Satellite U400-124 - Vista does not so how can I access data?

  I have a problem with my U400-124 loading Vista. It has a blue error screen when you try to start windows. It happens with the startup repair program, but it does not work. This is why I have a question, unless someone can help with the above.

  I have restore disks, but I have to get the data on the hard drive. Is it possible to remove the hard drive, place it in an external enclosure, and copy the data I need. Then place the drive hard back in and start the restoration process?

  Thanks in advance.

  Yes, it's not a problem and you can do it.

  I did the same thing on my laptop satellite. It is fairly easy because the HARD drive is removed in minutes and so I can save all my data on my other laptop.

  These adapters USB disk HARD 2.5 SATA are not expensive. Ask your local computer dealer or eBay search. I bought my adapter on eBay.

  Good luck!

• Satellite L300-1AY recovery does not

  Hello

  I have a question about the recovery for a Tosihba Satellite L300-1AY with Windows Vista preinstalled.
  I wanted to grab my laptop and when I pressed F8 during startup I could choose Restore my computer.

  But after the game, I received a message-box (System Recovery Options) telling me that installed programs may not start, and the only option I had was press OK then the computer shuts down.

  I was wondering if there was any way, this can be corrected or if there is another way to get my computer back.

  Thank you
  Pascal

  Hello

  You may retrieve the laptop using the recovery DVDs that you created if all goes well before this problem happened
  Did you create recovery DVDs?

  If this isn't the case, then only the HARD drive recovery option can be used.
  For this you have to press F8 after that laptop has been powered.
  Then choose fix my computer.
  Then a new window will appear and then you could choose Toshiba Recovery.

  If this procedure does not start and you will not be able to use HARD drive recovery you need a Toshiba Recovery DVD.

  If you didn t create the recovery DVD, so you can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Satellite L750 - 17 p does not load Windows

  Hi all... I have a Toshiba Satellite L750 - 17 p, since a few days now, when I turn on the PC after the toshiba logo I get the loading screen and the window ms back with the inscription: system32 / drvload.exe
  MS-DOS screen remains empty and the computer doesn't load... could you help me?

  Are able to repair the system using the Windows own repair options?
  I guess you are using Win 7 because this system has been pre-installed by Toshiba.
  Switch on and press F8. Here, you choose the first option called fix my computer.
  Now you should be able to choose between several options. I think you should try the first option that allows you to automatically repair the system.

  If this option does not help, try to set the system on the last good configuration/status running

• Windows Vista does not load on Equium P300-16t?

  Help!

  P300 for my daughter does not windows once a CF (containing only JPEG Images) flash memory card has been inserted into a USB port and removed when starting up.
  I get a windows error recovery page that says a recent hardware or software change is prevents the loading of windows.
  Two options are given 1. Repair launch 2. Start windows normally. Neither will launch windows.
  I can get the "safe mode" screen when I press F8 at startup upward. When I try to start in safe mode it hangs just after 10 seconds or more.
  I can access the BIOS screen by pressing F12 and default configuration value. Always not load Vista.

  I have lost the discs to restore that have been made on the first day, and there is data on the hard drive that has not been saved! So I hope that there is an easy solution for this.

  Hello

  I doubt you could disable in the BIOS.
  But you can check if a USB option in the BIOS that would help you to disable USB ports.

  Otherwise, you could try to reinstall the operating system by using the disk HARD recovery option.
  FIR this press F8, and then choose computer repair mu, then choose HDD Recovery.

  But this process will format the C partition and you lose the data that was stored on C

• Satellite L300-13R - WLAN does not not on Windows 7

  I am on Windows 7, it can't detect the wireless device, says I need to reinstall the driver, vista and xp driver install it as they say that they do not support my opperating system.

  I currently have to plug an ethernet cable to get internet. I use a Toshiba Satellite L300 - 13R PSLB0E.

  Please could I have help, thank you very much.
  P

  Hello!

  I think that this is not a problem. Windows 7 is only a beta OS and at the moment, the pilot decision-making is not very good.

  You might find some drivers on the site of the factory of the WLAN card. In your case, it should be Realtek.

  Good bye