Create snapshot and return

Similar Questions

• How to properly snapshot and return to a domain controller

  I have 4 x of domain controllers Windows 2003, which 2 are physical and 2 are virtual. I need to install the component of the IMU (for Unix identity management) on each of them.

  I would like to take a snapshot of one of the virtual domain controllers before you install the IMU component to restore if it causes problems.

  Does anyone know how to do this correctly?

  If I install the component on one of the domain controllers, to decide that it does not work as expected, restore the domain controller from the age of 1 hour and restart snapshot will there AD questions? Are there other measures that should be taken?

  Thank you!

  Hello.

  This approach might violate support with Microsoft.  It is possible, but think of the consequences of not having support on ad, before trying this.  I would personally have ready another DC and a good system state backup.

  "Active Directory does not support other methods to restore the contents of Active Directory. In particular, Active Directory does not support any method that restores a 'snapshot' of the operating system or is in the volume of the operating system disk. This kind of method causes a restore in the sequence of update (USN) number used to track changes in Active Directory. When a USN recovery occurs, the contents of data bases Active Directory on the incorrectly restored domain controller and its replication partners can be definitely incompatible"- MS 888794 kb

  Good luck!

• I need to create a curved with type text box that heal and return to the next line in the form of curved text. How do I do that?

  I need to create a curved with type text box that heal and return to the next line in the form of curved text. How do I do that?

  1. Draw a set of concentric half circles also spaced, stacked so that the outermost is the most remote.
  2. Use the text tool to add text to the outermost path, thus creating a PathType object.
  3. Select all the paths. Type > threaded text > create.
  4. Text tool: click at the end of the text in the object of PathType. Continue typing.

  

  > If I do that it will not type more.

  A Warp effect is a direct effect. When it is applied to the type of objects, they are still editable text. The chain will deform, however, the text also, not only the paths to which it is attached. Sometimes you want that, sometimes you don't have.

  JET

• Create the snapshot and paste in different PDF in Adobe Reader DC is broken

  Creating a snapshot and pasting to a different PDF in Adobe Reader DC are broken

  When I paste the snapshot to the 2013 Word and copy it again I can stick it in the PDF without problem.

  Hello

  Can you please let me know the complete workflow, exactly what you're trying to achieve?

  Copy paste & images is part of edition & you can't edit PDF using the Adobe Acrobat Reader DC.

  For this will need you Adobe Acrobat application (Adobe Acrobat free trial downloadversion |) Acrobat Pro DC).

  Kind regards

  Nicos

• Can I create a snapshot and replace it with an image (or link another picture than the current)?

  Based on http://forums.Adobe.com/thread/1308132?TSTART=0 I decided to add each question separately:

  Hello, I am very interested in buying Lightroom 5.2. I tried the RC that was missing today. Yet, I have several questions that I can't find really good conclusive answers, I'd like to get an answer before buying LR. Please do not write maybe like this or that (assumptions), because I don't want to start my entire workflow and then realize that I have to change all around, please reply, if you know for sure that something works and you are, preferably, using this method too.

  Can I create a snapshot and replace it with an image (or link another picture than the current photo)? Details: I made adjustments in iPhoto until now I want my (unpublished) masters, some RAWs JPEGs, create a snapshot and set the photo as the one to keep. If it is not possible, all of the recommendations (in addition the usual masters of backup and import changes).

  What I do is I have to assign some metadata down battery photo indicating of don't not to export the picture. Then, I use either a collection of smart to find the photo I want to and can not find the photos, I don't want and export all in the smart collection. or I use a Collection of post Smart, even once allows me to select only the pictures I want and not those I want.

  Of course you manually uncheck items you want to export, which work as well.

• How to create a fast forward and return quick button?

  I would like to create a simple fast forward and return quick button. I get sporadic results with the rewind button. I love the playhead for 3 seconds (72 images) both when the user press the fast forward or rewind button. They should be able to hit two buttons repeatedly. If the playback head is less than 3 seconds, then it will go to the first image.

  Here is the code:

  var FrameNumRewind:Number = this.currentFrame;

  FrameNumRewind = 0

  stage.addEventListener (MouseEvent.MOUSE_DOWN, page_watch);

  function page_watch(event:MouseEvent):void

  {

  If (event.target is bnt_Fast)

  {

  var FrameNumFast:Number = this.currentFrame;

  this.gotoAndPlay FrameNumFast += (72);

  }

  If (event.target is bnt_Rewind)

  {

  Will head frame to the first frame if less 73 executives.

  If (FrameNumRewind < = 73)

  {

  SoundMixer.stopAll ();

  this.gotoAndPlay("1") ;}

  }

  on the other

  {

  this.gotoAndPlay (FrameNumRewind-= 72);

  }

  }

  What I am doing wrong? Is there a better way to do it?

  I would appreaciate any help or references.

  One thing, that you must take care, is that you should not nest functions named within other functions.  Remove this function ff72 by itself.

  The currentFrame property is a read-only property, but you try to change its value using code in this line...

  this.gotoAndPlay this.currentFrame += (72);

  So change that line to be

  gotoAndPlay (currentFrame + 72);

  noticing that I took out "this" references as well.  They are most often useless in AS3 scenarios.

• currency of the row has been changed after cancel create and return to the call of workflow

  JDev 11... 2
  I have two workflow set up very similar to the task of Steve Muench and you will receive. I have master / detail in two tables on a navigation page and a different workflow that create/change for the master and detail (separately). When I create a new master, everything works well except that when I cancel and return to the appellant task, I get the "currency line has changed since the user interface has been made." The cancel task-flow-return has end transcation = rollback and restore savepoint = true and Cancel button immediately a = true. Looks like the controller looking for the newly created folder that has been rolledback. Given that this seems to be a model common vey, what is the best way to not show the warning?
  
  Thanks a lot for the pointers.

  Hello

  the usecase of yours is the standard demo I show for the workflow and I never had this problem. One reason might be that you keep the scope of the task flow DC to share instead of isolated, in which case restoring impact on the flow of both. If you want to keep shared DC then check that you return to method activity that is re - running the battery for the parent workflow

  Frank

• Compare multiple columns and return a different value

  I have more access to excel and I'm running my previous workflow in numbers of duplication of issues.

  I have a worksheet when a sheet with all my power tools.  On the "Power Tools" sheet I have columns for the brand, Type, model, purchase date, etc...  An example of this would be: pass a "DEWALT", "Jackhammer" Col B, Col C "DCD995M2" and so on.

  I have a second sheet in the same document which is my front end if you want.  I wanted to have selections for this dynamic drop-down list but it seems it is not possible without scripts, but is not the immediate question yet I'm the mention the case where someone knows a good fix.  The second sheet "Sorting Test", I created manually drop-down boxes, one in column A of the brand and the other in column B for Type.  I'll choose the brand and type and I want numbers autofill the rest of this line based on these two selections.

  Example:

  In the 'Sort Test' sheet I select DEWALT in column A and I select the drill in column B and I want DCD995M2 is displayed in column C and the purchase date in column D and so on.

  Excel in it would be a game table or something similar.  So far every site and search google only gave a lot of people who try to do VLOOKUP or correspond to errors, but I've really met anyone corresponding to two distinct cells from two separate columns and return data from this same line a match was found on.

  I must also mention I'm really trying to avoid adding a hidden line that combines some of these but I know it's the most noticeable work around.

  Basically, I want to match two selections separated against two separate columns, and when it finds the match, I want it returns a different value of this corresponding line how I got everything just copy this formula on adjacent cells and simply adjust to the column in the same row matched.

  I know that I shouldn't do this on separate sheets, but it's just a choice that I made a point of design.

  Any help would be appreciated, because I'm trying to really get the most out of the numbers, especially with how it syncs between desktop and mobile and I have more access to Excel.

  You can it as what you do and why?  This will help us understand what drives the design.  Leave out how to solve the problem,

  also post screenshots can be very useful

• ProBook 455 L3P93ES G2 #ABZ: installation without end and return the video driver AMD R6 and R7 M260DX and stop on a black screen system

  Hello, I'm in trouble with this problem. If anyone can help me, I appreciate a lot. Thank you in advance.

  Laptop: HP ProBook 455 G2 L3P93ES #ABZ

  Problem: windows back AMD R6 and R7 video driver to the old version of windows update install. Return process the screen come black and stop here.

  Procedure, I followed:

  1. updating the bios with the latest version (M75_0141.bin)
  2. new facility created by HP Cloud recovery customer USB boot disk
  3. Install the drivers and programs of the HPSoftwareSetup.exe util
  4. Connect the network cable and upgrade the drivers and the HP Support tool programs assistant
  5. Install the software
  6. Join the Organization's domain
  7. Force Windows Update to version 1607 by the upgrade of Windows tool
  8. Windows Update

  Item 4, at random, windows update 10 and return the driver from these versions:

  • 15.201.1301.0
  • 15.201.2301.0
  • 15.300.1025.1001

  I don't have install the AMD specific video driver (Radeon Crimson Edition 16.7.3 software) or drivers from the Chipset AMD (Crimson edition 16.7.3) because when I try in a previous installation of test I had the same problems

  To restore the display I have to start windows in safe mode and disable the two R6 and R7 display cards, and then restart. After that I can reactivate the cards one time.

  This device first question first time I install Windows 10 the year in August (Yes, after a few days Windows 10 out)

  Any help that will be much appreciate because I have to reinstall on 20 laptops for the school to start the day.

  Thank you

  ScuolaCarovana

  Hello;
  
  Let me welcome you on the HP forums!
  
  From your description, it seems that, after you have installed the correct video driver for your ProBook (15.201.1301) AMD, Windows Update is then by installing a different driver on top of that, right version?

  If this is the case, you must follow these instructions to STOP Windows update update drivers: how stop Windows 10 to update automatically the device drivers - windows Windows 10-10

  Once you do this, you should not see updates to the pilot after that.

  Good luck

• Microsoft Management Console error: this function is not supported on this system. Also noticed that the automatic updates did not install it and returned error 80070005.

  Original title: Microsoft Management Console this feature only is not supported on this system

  I am running Vista 32 bit Business since an administrator account.

  Recently, I noticed that the automatic updates did not install it and returned error 80070005.   After investigation, I found that I could not open mmc at all and always get the message "this function no is not supported on this system.  No major changes have been made to the configuration to trigger it and I can't watch the event log because it is in the MMC.
  I have studied this question in line and tool the following actions, which none worked:
  carried out a complete antivirus scan (I use Commodo internet security)
  created another account administrator
  has run SFC (no problem)
  has run the registry cleaner (no problem)
  has run msconfig.exe and disabled all the startup process
  updated windows right click and run as administrator
  Started in safe mode and tried all above
  After that, I don't know where to go... it doesn't seem to be a download for Windows vista to reinstall mmc.
  I have about 50 updates critical, sitting in my windows update that can not install because of this problem.  Can anyone help?
  Jeff

  Hello Helpmehelpme,

  First, I would check since it is professional Vista was that computer on a field of work or it was already on an area of work? There may be group policies that are in place that prevent to run MMC.

  When did start to happening? Is there anything new on the system which has been introduced into the environment (software, hardware)?

  This thread gives a few steps trying to the original poster that you can't have.

• I have a problem with the new administrator creating accounts and the original missing on the computer account.

  Original title: profile has been automatically removed, new profiles created automatically and can not open a session

  Help! I closed my laptop (only in the ordinary course of its use) and when I turned it back on, my usual user profile was gone and a couple of new ones have been created. One was created with my professional e-mail address as username (which is strange because I've never used this e-mail in the computer) and the other is empty. I tried to connect both of the profiles using my old combinations of the new user name and password, or user name and the old Word, but it is said that the account and the password is incorrect. I also tried to log on as an administrator, but it says "your account has been disabled. See system administrator. Is it possible to recover the data in the old profile without reinstalling Windows because I am away from home and do not have the disc. ... I use Windows 7.

  Thank you very much in advance for any help!
  You might be able to solve your problem using the system restore. Here's how it works:
  1. keep tapping F8 during the first phase of startup.
  2. select Repair from the menu.
  3. Select an administrator account, and then enter its password.
  4. When you are prompted, select System Restore.
  5. set Windows to a point before this problem occurred.
  On questions of password-, I treat my PC as I have my house: I always have a spare admin account / SpareKey so that I can return new anything that happens. You have a fully tested alternative admin account? If you do not, and if the method above doesn't work, then, you have a major problem that you will not be able to resolve without a CD to repair Windows.

• Search for compounding and return processor &amp; Performance

  Hi all

  We must use Lookup from 2 to 5 and processors return in each of our 16 lots. A couple of batch processing about 700K records per day.

  To reduce clutter, I think create a processor research and personalized return (containing 5 processors Lookup and return and processor attribute merge at the end to combine the outputs of each processor search/return).

  In some of the processes, I can't use all the 5 research as input for the custom processor. My understanding of article - creating processors , all stages of the research will be always executed for all records even if some of the entries have the value NULL in accordance with the instruction-

  "the value of the attribute will be considered as zero in the logic of the processor.

  Can I create more than one processor for each research/back number 1 2, research/back 3, etc and use them in my process or compounding of processors will have a negligible performance impact?

  Also think about composition processors to add an attribute, believe this won 't a lot of impact on performance if I use not all entries.

  Kind regards

  Vivek

  1. research and return is generally effective in performance. If the research is external, make sure that you have indexes on columns of search.

  2. 5 searches in a batch is not uncommon.

  3 5 to put in a composed robot research is fine and will have no impact on performance.

  4. If you do not every 5 to run according to the given conditions, you can model this in your process of / processor, for example by using no. Data Check not to records of the road to one of the controls. Make sure that you join all records after passing different paths (the attributes of fusion will be this beautiful.)

  5. as you say, adding attributes will not add any significant performance overhead. What makes them in a processor made up makes no difference to performance.

• Create, load and generate icons not visible layout when the report was created

  Hello guys,.

  Hope you can help out me. Some users are not able to create reports on BI Publisher, the data model dialog box does not automatically display and when we click on the magnifying glass to select one, and then click OK, the dialog remains in view while we reached Undo to go back to choose the layout of the report , but that part is never available.

  We tried several things as hitting SAVE as... and return to change the report but still no layout to choose.

  Is anyone aware of updates from Oracle who cites or solve this problem?

  My users use Internet Explorer 9 on Windows 7.

  

  OK, I discovered with this particular user.

  Java is not enabled on this computer. So we updated Java and enabled on windows.

  Fact!

• Cannot create snapshots of error message replica devices

  Greetings,

  I'm currently testing my recovery plans for all of my groups and I get the following error message:

  Cannot create snapshots of the replica devices. (Include a screenshot of the error) By the message, the storage Port cause is not identified, either the storage port information in NFS list is incorrect else check the option "isIP4" in the file ontap_config corresponds to the IP address in the field of the NFS.  Any suggestion? Thanks for all your comments as always!

  OK after doing some reading on the NetApp KB Portal, the problem was related to a firewall policy applied to the LIF configured for NFS traffic. After I change the firewall for data management policy, I could test my recovery plan. Jürgen Vervoort was therefore in the right direction, but it was on the storage level.

• Create folders and move files by reading csv

  Hello guys,.

  That can create a script to read csv and create folders and move files into the folder.

  My csv will look like

  

  There the names of folders and file names, I kept my files (Mention in the 'File name' column) in the office. When I run the script it must read the csv file and create the folder (depending on the "folder names") and the correct file must move in the particular folder. Hope I have clear requirements.

  So we need 4 above csv files and the respective files must travel in their records. Need help!

  Thing may have changed as I've tested with CS6.

  Please try then.

  #target photoshop;
  main();
  function main(){
  var csv = File.openDialog("Please select CSV file.","CSV File:*.csv");
  if(csv == null) return;
  var sourceFolder = Folder.selectDialog( "Please select source folder");
  if(sourceFolder == null) return;
  var data=[];
  csv.open('r');
  while(!csv.eof){
  var InputLine = csv.readln();
  if(InputLine.length > 3) data.push(InputLine);
  }
  csv.close();
  for(var f in data){
  var dataLine = data[f].split(',');
  var folderName = dataLine[0].toString().replace(/^\s+|\s+$/g,'');
  var fileName = dataLine[1].toString().replace(/^\s+|\s+$/g,'');
  var file = File(sourceFolder + "/" + fileName);
  if(!file.exists) continue;
  var outputFolder = Folder(sourceFolder + "/" + folderName);
  if(!outputFolder.exists) outputFolder.create();
  if(file.copy(outputFolder + "/" + fileName)) file.remove();
      }
  alert("All Completed");
  };