Connection via Port COM for Nokia 6288

Similar Questions

• BlackBerry Smartphones Blue error screen when the "BOLD" connection via port USB for Windows Server 2003

  I try to activate a new blackberry 9000 "BOLD", the first time I plugged the server he was immediately recognized and installed. I selected add new device of the user and the activation process started, but about 1 min in the activation I got a blue screen error stop 'driver of bugcode_usb.'

  After restarting the server I reconnected the "BOLD" to the server and once more Windows he acknowledged and began the installation process, this time however, the VM didn't pick it up and I had to click on VM > removable devices > usb devices to start the process of installing how he immediately provoked the stop error blue screen again.

  We run BES 4.1.4 on Windows Server 2003 in a virtual machine (VMWare 1.0.4) environment

  Does anyone have any suggestions? I don't want to plug it back for fear of crashing the BES server again.

  have you tried wirless EA?

• DSC-HX90V/B does not connect via Wi - Fi for my MacBook Pro under El Capitan!

  I just had a DSC-HX90V/B and got Wi - Fi to connect to my iPhone 6Plus. However, I can't seem to connect to my MacBook Pro using PlayMemories House. I use the network configuration tool, and even if my camera is connected via USB (and why do I have to do this, I could ask?), it is said that "any camera that supports the network connection is connected.

  I don't understand this.

  Hi pws442,

  When you use a Mac OS computer, you will need to download the software of automatically importing wireless to allow the camera send wireless files. You can download the program here.

  After downloading the software, please follow the steps below on how to configure the wireless connection.

  • Initial setup process:
  
  
  • 1. Make sure you that using a memory card is inserted in the device.
    
    
    2. Turn the camera
    
    
    3. On the camera, set the mode of USB connection from the camera to the MTP or PTP.
    
    
    4. Connect the camera to the USB port on the computer.
    
    
    5. On your computer, go to Finder and select Applications.
    
    
    6. Select automatically importing wireless.
    
    
    7. Set up your computer as a device to import files from your camera wireless.

       NOTE: If the device should be synchronized with another computer, the new computer must be defined as import wireless device.

    
    
    8. In the auto import wireless window, select set.
    
    
    9. In this computer will be set to the wireless device for your window of the camera import, click OK.
    
    
    10. Unplug the USB cable to the camera and the computer.
  
  
  • Transfer wireless after the initial setup process
  
  
  • 1. The device, select Menu.
    
    
    2. Select Setup.
    
    
    3. Select settings of the Access Point.
    
    
    4. Select the wireless access point.
    
    
    5. Press the play button on the camera
    
    
    6. Press the Menu key.
    
    
    7. Select send to the computer.
    
    
    8. Follow the instructions to save the images on the computer.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• Someone has a vi for LCD with port COM for SBRIO

  Hi people,

  I have a SBRio-Board and you want to drive a LCD on the COM-port.

  Is this possible?

  Someone has a vi to do this.

  I know, it's possible with FPGA lines, but is not the normal/best way COM port?

  Greetings, Ruedi

  If you look on the LabVIEW tools network and search for LCD a few possibilities appear.  http://www.ni.com/np/app/main/p/bot/no/ap/lvtn/lang/en/pg/1/sn/n25:software, n21:28/sb/default /? q = LCD

  It is said expressly in the box to Reach tools that it is via RS - 232 interface.  Although not your specific device would it be worth the trip.

  Its interesting that I would have liked to have a few years on a project using a touch screen of Reach.

  There is also an example here http://www.ni.com/example/31079/en/.

  I hope that this will help.

  Warrior of wire

• HP deskjet 3510, connected via wi - fi for MacBook Pro running OX 10.7.5

  All of a sudden my computer will not 'see' the printer, I recently changed my router, but I was able to print after the change, the printer is connected to the network on the wi fi is stable.  I followed directions available in the HP web site, including the lead from the printer to my computer, when I try to install the computer can't "see" it

  Any advice as to what to do next?

  Thank you

  10 guajiros

  '

  Hi 10guajiros,

  I want to help you get your Deskjet 3510 working on your Mac running 10.7.5. I understand that you already have a troubleshooting, but I am confident that we can get back to work.

  Please, take the following document and complement the solutions advocated; The printer keeps Wi-Fi connection.

  If the problem persists, please let me know what is the first part of the IP address of printers. It might be 169.254.XXX.XXX, or 192.168.xxx.xxx or 192.168.223.1. If end with 223.1 Please provides all of this period if not only need to know the first 2 segments (yellow and green ) of it.

  I look forward to hear from your part, thank you.

• slow when they are connected via anyconnect VPN, ASA OS 9.0

  Hi guys

  My users are complaining that they are experience slowness when they are connected via vpn anyconnect for ASA os 9.x, 5 Mb files tikes 15 mts rough with them, even if these users also have a connection broadband on their place

  any guy insight

  Thank you

  Hi Ibrahim.

  My first suggestion to you is to follow the recommendations of Cisco, associated with latency problems.

  hostname (config) #-group attributes policy
  hostname (config-Group-Policy) #webvpn
  hostname (config-group-webvpn) select #svc dtls
  hostname (config-group-webvpn) #svc df-bit-ignore enable
  hostname (config-group-webvpn) #svc routing-filtering-ignore enable
  hostname (config-group-webvpn) mtu #svc 1200
  hostname (config-group-webvpn) #svc compression no

  (a more recent version, you can use the command "anyconnect" instead of "svc")

  If after this the problem persists please let me know when is the right time to reproduce the problem and collect the balls, debugs and catches. I also need the current configuration of the SAA (see technology in a txt file)

  Kind regards

  Aditya

  Please evaluate the useful messages.

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Add PCI Parallel port card for PC comes with no port does not print.

  I recently got a few new computers that were shipped with Windows 7 Professional. I forgot that they do not comes with a parallel port.

  These computers are intended for a point of sale application, which requires a matrix printer. First I tried USB to parallel to connect the printer, however, this does not work, because the printer is not smart enough to identify itself, it will not appear as a printer.

  My next solution was to add parallel ports via PCI cards. The card installs very well, and Windows 7 detects the drivers for it and installs. No errors appear in the Device Manager, but a couple of weird things happen.

  1. the device manager gets the parallel ports under Ports (COM & LPT) but it also gets a "multifunction adapter" in a different section (not in front of the PC now, so I don't remember which.) Both devices appear to be fine and report that they are working correctly.

  2. under "Devices and printers", I get 1 (or in the case of a card dual parallel port, 2) ' Microsoft aw Port"devices.

  I then install the driver from the printer and add the printer to "LPT3" which is the device of parallel port added in Device Manager. Print a test page, and... Nothing. Open the print queue and it is empty. Try printing a test page, and it will appear briefly in the queue and disappears, just as it would if the print job was successful. If I try another device, it (as expected) reports an error that the device does not exist.

  Although it does not directly concern, article in the knowledge base at the http://support.microsoft.com/kb/883253 seems to describe some similar circumstances, enough so I wonder if there may be a connection. Maybe the parallel port arbitrator is not installed in Windows 7 by default if the PCs have no one? If this is the case, how do I install it?

  If it's a goose chase wild... Well, that's why I asked the question.

  Help!

  Well, call it weird...

  I found an another USB to parallel adapter, rather than trying to directly convert the printer, it installs like a USB IEEE1284 adapter. (If it's a USB parallel port). This appears also in the 'ports and devices', but as an adapter of 1284. Try the printer. Bingo.

  Here's the weird part. Once Windows 7 installed the drivers for this device, I unplugged and then reconnect the printer parallel port PCI. I changed the printer I have installed (on the USB001 device) unit LPT3 and bingo. It still prints. He continued to work even with the unplugged USB adapter.

  So I strongly suspect that there is some kind of pilot missing for a missing parallel port, which Windows 7 don't think he needed to use a PCI parallel port but he knew that she needed a USB parallel adapter. I only wish I knew precisely what pilot that he was. Maybe this will give some clues so people who know Windows 7 might be able to understand. I'm more than willing to answer questions if anyone wants to know what really happened here.

  For memory, the sequence I went through was: I tried the printer (installed with the drivers from the manufacturer for Windows 7, 32-bit) installed on LPT3 device which Windows 7 acknowledged the parallel port as a map. Checked the symptoms that I have stated above. Print job appears to be completed, but the printer does nothing. Uninstalled the printer. Plugged in USB to parallel adapter, expected for Windows 7 recognize the device and install the drivers. Plugged into the printer (PnP does not.) Install the printer using the same drivers as before, but using the USB001. Printer worked. Disconnected the printer from the USB adapter and reconnect the parallel port card. Changed the printer to use LPT3 Ports print configuration tab. This time, it worked.

  Repeatability, I did the same thing with the other parallel port PCI card and a similar printer on another position of the same work. This facility began with the installation of map of parallel port PCI first, then followed the same sequence, with the same results.

  So, my problem is solved, but I think that it is unreasonable to plug a USB adapter for a PCI card.

• Bluetooth connection for Nokia phone as a modem disappears after a few connections requiring a reinstall

  Hardware: Acer Aspire Timeline 1810, Nokia 6700

  OS: Windows 7 64-bit

  Pilot bluetooth Microsoft 6.1.7600.16385 (controlled for update, this is the last version June 21, 2006)

  ------------------------------------------------------------------------

  Problem:

  Laptop can see the phone via bluetooth and pair a connection. Subsequently I can Bluetooth icon > click > join a personal area network > click the phone icon > then connect to the internet via the phone.

  After several connections/disconnections, it is not possible to connect to the internet via the phone as Bluetooth icon > right-click > join a personal area network > no phone icon.

  However Bluetooth icon > right-click > show bluetooth devices > current phone icon.

  All I can do is to uninstall the phone as a bluetooth device, then reinstall. I have done that so many times, I'm now up to COM32 and COM34.

  Then, it seems an inherent instability in the bluetooth driver? I've encountered similar problems, even worse, with Nokia E66 and Blackberry 9700 (neither of which Windows could connect to establish an internet connection).

  ---------------------------------------------------------------------

  Technical information:

  Nokia 6700 classic properties > hardware > Standard modem over bluetooth link #2 > properties > (RFCOMM Protocol TDI) > status > device works correctly.

  Bluetooth icon > show bluetooth devices > nokia 6700 icon > click the icon > an error occurred during initialization of this operation. Try restarting your computer or device (don't restart two makes no difference) (by the way when the phone appears under personal space connection > This error message may appear, but it is still possible to connect)

  Phone and Modem window > modems > lists according to:

  Standard modem - COM32

  Standard modem over a bluetooth link - not attached

  Standard modem via a bluetooth #2 - COM15 link

  Standard modem via a bluetooth #5 link - absent

  Standard modem over link bluetooh #6 - COM34

  ------------------------------

  All the solutions to this problem?

  Thank you.

  Hello qwertyyuiop,

  1. have you set up the Bluetooth modem to connect via phone?

  2. have you got the correct settings from your mobile service provider to connect to the switched network?

  There are several settings that you need to set up using your Bluetooth modem. You can get these settings by calling your service provider. They will be able to help you configure the modem.

  Or the best way to connect a phone Nokia would be using Nokia PC suite. Personally, I connect my laptop with the phone. I had several problems when you try to connect by configuring modem Bluetooth as the connection used to move frequently.

  I suggest to install Nokia PC Suite on your computer which would have received you on a CD with our phone. This will give an option to connect to the network and automatically configures the modem. You can also download the software suite the link below:

  http://Europe.Nokia.com/support/download-software/PC-suites

  DISCLAIMER OF THIRD PARTY SOFTWARE:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem after connecting via the USB port of the printer. Error 0x0000007a

  Recently, I plugged my HP Deskjet2360 printer via the USB port on my HP laptop (running w7 Home premium 32-bit) and can not print at all. When I try to print a test page I get the following message ' operation could not be completed. Error 0x0000007a. Operation failed.

  My usual Setup is to have my printer connected to my desktop (Windows XP Pro). My HP laptop is connected via a wireless connection to my home network, which is also connected to my desktop computer. Of course, this means that I have the office turned on to be able to print from my laptop.

  Everything worked great until I decided I'd rather have my connected printer to directly to my laptop via USB.

  When I connect the printer via the USB port on my laptop, windows installs the software and reported no problems. Yet when I try to print a test page, I get the mentioned error. When I then reconnect the printer to the desktop and try to print a test page to my network, I get exactly the same error message. The office and the printer still work fine, it's just that I can't print from my laptop.

  I uninstalled and reinstalled the printer on my laptop with the USB connection and the network, but it still does not work. The resolution of the problems on the laptop reported no problems, and the printer is set as default printer. I also get an another error msg when I click on the Preferences button in the printer properties: address of the 0x5aeba4f1 function caused a protection fault. (code 0xc0000005 exception) Some or all property pages cannot be displayed.

  
  

  The only way I found to get around this is to use windows restore and restore my laptop before the point when I connected the printer via the usb port.

  Any suggestions?

  Hello
   
  This error 0x0000007A describes the data area passed to a system call is too small. ERROR_INSUFFICIENT_BUFFER
  You can try to uninstall and reinstall printer driver and check if that helps.
   
  Here's how you can do:
   
  1. open programs and features by clicking on the Start button, clicking Control Panel, click programs, and then clicking programs and features.
  2. Select a program and then click on uninstall.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  http://Windows.Microsoft.com/en-CA/Windows7/remove-unwanted-programs-from-your-computer
   
  After you have uninstalled the driver to restart the computer, this should install it the appropriate drivers for it. You can also try to download the latest driver from the manufacturers website and install it.
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1101015&lang=en&cc=us&TaskID=135&prodSeriesId=1101113&prodTypeId=18972
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
   
  Kind regards
  Umesh P - Microsoft Support

• connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

  connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

  Best regards: John

  Hello

  -Do you have Bluetooth devices internal or external connected to the laptop?
  -Have you checked if all the Bluetooth drivers on two laptops are very well installed?
  -This work was fine before? If so, what are the hardware/software changes made on the computer before this problem started?
  -Is a problem only when these 2 laptops connecting or is that when you try to connect these 2 laptops at any other laptop too?

  I suggest you to go through these below items that could help you to fix this problem.

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices
  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this information helps you!

• Mac OS 10.5 Hello cannot find the printer driver for P1606dn connected via a wired network.

  I tried to connect my HP Laserjet Pro P1606dn to my PowerMac G5 running Mac OS 10.5.8.  I have connected the priner to my LAN via the Ethernet cables and Switch 8 port NetGear.  I then properly installed printer driver from the CD provided on the Mac and went into system preferences / Print & Fax to add the printer to the list of the connected printers.  Click on the button «+»  The HP P106dn was listed in the table (kind = Hello).

  I chose this entry in the table, and the dialog box immediately went into action: the pullodwn "to Print using" listed the message 'Please select a printer or driver model' greyed and a spinning wheel called 'Search for new drivers' appeared underneath.  The dialog box search but never find the printer driver (I waited for 20 minutes without success).  I installed some other HP printers in this way on this machine with no problems, for example, HP Color Laserjet 2605dn.  Why this method does not work with this printer?

  I was able to connect to this printer with other (Intel) Macs in my house through this arrangement of LAN.  Is the printer driver for the Intel Macs only?

  I disconnected the printer from the local network and connected directly to my Mac with a USB cable.  The same process, and I was able to connect to this printer.  Successfully print a document page.  Although it gives me a work-around for Mac G5, I need to share this printer with other Macs in my household.

  I went on the HP download site and downloaded the latest driver for this printer, re-installed the printer driver on Mac and repeat the steps for the arrangement of LAN (above) complete the connection via the Print & Fax dialog box.  The result was the same: spinning wheel looking for a printer driver are not.

  I don't know what else to do, or why this facility will not work.  I would much appreciate it if someone could give an explanation for this or any suggestions as to what can be done?

  Ed

  I'm sorry to get back to you on this so late.  I was OOT Sunday all day.

  Ok. So, here is what happened.  As I mentioned at the end of my last post, I was in the process of resetting my printing system, repair disk permissions, then restarting.   Reset the printing system wiped out all my printers in the "Printers" pane in the "Print & Fax" system preferences dialog window  I moved forward and fix permissions of the drive on my system disk.  A number of authorities have been repaired, but nothing that I could decipher impression related ro.  Finally, I restarted my Mac and went directly to the dialog box print & Telec.

  As the printers pane was still empty, I'm gone before adding the simplest of my printers (LaserWriter 360 connected via AppleTalk) who has always been correctly added to the list printers in the past.  No chance!  WAITED a few minutes everything is was "Looking for new drivers.".  I tried the Color Laserjet 2605dn.  No luck.  Then the Laserjet P1606dn.  No luck.

  Thus, this way of solution did not work, and now I was without any driver associated with one of my connected printers.  I decided that I had no choice to rebuild the operating system.  I started my DVD of Installation OS 10.5.4 to rebuild my system (without reformatting my HARD drive).  Once which was finished, I've immediately went to the Print & Fax dialog box and tried to add in each of my printers.  In a few seconds the LaserWriter was added successfully, then the HP Color Laserjet 2605dn, and FINALLY, the Laserjet P1606dn.  Thus, it appeared that my upgrade to OS 10.5.8 was at the origin of the problem.

  I proceed with Sofware Update to restore the computer to OS 10.5.8 and again once, went to the dialog box Print & Fax to experiment with the addition of each of the printers again.  Stopping before the acceptance of each 'Add', I could find quickly and successfully the drivers for each of the connected printers.  So, it doesn't seem to be a problem with OS 10.5.8 find printer drivers.

  After reflection, I concluded that the problem must have appeared during the upgrade to OS 10.4.11 OS 10.5.4, but it remained hidden until I tried to add these new printers to the list of printers.

  I appreciate the reference to the last download Laserjet full feature software.   Since I was able to solve the problem without it, I mind not do the download.

  I want to thank you for patiently stay with me during the last two weeks, your advice and comments.  Just having someone to "talk" about it, it was reassuring and useful that I went along to apply each suggestion to the problem.  I tried to solve this problem several times on my own before that, the search of the forums, and I hesitated to participate actively – to reach out.  I'm feeling very different about it now.  Once again, thanks a lot.

• Login Creditials fail for desktop connection remotely using IP local. Connection via the hostname works very well in local intranet

  Something happened that broke my remote desktop connection.

  System-Win 7 Pro, with enabled Remote Desktop connections. (Static IP, router configured for port before any RDP to this system)

  For a few years now, I had access to this system via desktop remote with all the problems. I have connected by using the name of the computer on the local network and have also connected using the public IP address with a problem. Name of user and password for one, way worked fine.

  The other day there was a power outage or something, most of my systems was suddenly restarted or turned off, and my router had to be reset. Not sure if this is a coincidence of bad, but now the problem is that connection via the public IP address I get "your credentials did not work" when you try to connect. However, if I connect using the host name within the local chapter of the network of the same name to username/password work very well because they always have.

  That's happened. I'm going crazy trying to figure this out. My remote user cannot log on this system.  Help, please!

  Thank you for taking the time to answer, it's really appreciated. I could solve the problem. I don't know how, but if finally started working again. I have reset my network card and reset IP address static of the machine, that I tried to connect. And after some back and forth with that, all of a sudden he was still working. I was suspicious that my router was causing the trouble because the login failure was due to the fact that I've been routed to another computer, even if the rules of the if correct port forwarding. I just he blamed on the PC from Gremlins. I'll keep this info for future use. Some how all refreshed and began to work again properly.

• HP Officejet Pro 8500 has 910 a, Vista 32-bit, does not connect via the usb port on my PC!

  I used to have it all in one connected to my pc, until I lived some printing problems, so I decided to uninstall it!  When I tried to reinstall, the pc will not connect it.  I tried different ports and have replaced the cable, have also downloaded the latest software and drivers all to nothing does not.  I can connect wireless to my laptop, but unfortunately is not a solution for my office because it is not wireless, so it must be connected via USB.  At my wit's end, please help me!

  Hello

  Can you try to insert a flash drive into one of the USB ports on the printer, to make sure she reads it?

  The printer port may be what gives you the question. In addition, you can try the USB printer connected to another PC?

  Let me know the results.

• Can I use my MacBook Air as an external display for a MacMini via ports thunderbolt?

  Can I use my MacBook Air as an external display for a MacMini via ports thunderbolt?

  Advice appreciated!

  No, you can't.