Create the directory in the "shared" area

Similar Questions

• How to create the staging area using the adautostg.pl script

  Hi gurus,
  
  I need help to install R12.1.1 EBS on linux, which is installed in the guest in the virtual machine operating system.
  
  I downloaded edelivery.oracle.com zip files. Then I unziped in/u01/stage12 directory. When I run the adautostg.pl script I get message saying please insert the DVD label RDBMS disc 1. No idea why?
  
  Should I copy all the unziped on DVD files and run above mentions the script to create the staging area?
  
  Thank you in advance for help you.
  
  Hemant.

  Hi Hemant;

  I need help to install R12.1.1 EBS on linux, which is installed in the guest in the virtual machine operating system.

  I think, you're on the wrong forum site. "Its better to write your topic in the Forum Home" E-Business Suite ' Discussion General EBS

  I downloaded edelivery.oracle.com zip files. Then I unziped in/u01/stage12 directory. When I run the adautostg.pl script I get message saying please insert the DVD label RDBMS disc 1. No idea why?
  Should I copy all the unziped on DVD files and run above mentions the script to create the staging area?

  To create steps of step-prereuest-installation etc. Please follow my blog:

  http://heliosguneserol.WordPress.com/category/step-by-step-Oracle-e-Business-Suite-installation/Oracle-e-business-suite-release-12/

  "" * PS: Please change this thread status to answered and if you have a problem on EBS, please report it on the Forum Home "E-Business Suite ' Discussion General EBS that you might get a faster response *.

  Respect of
  HELIOS

• 836: failed to create the shared memory data, error 22 store segment

  Hi, I am new to timesten and databases in general, and I'm testing the database timesten to test.
  
  I am running ubuntu linux in virtualbox and have java 6 is installed. So far, I installed the timesten database and configured the sys.odbc.ini to create a new database. However, it seems that I can't connect to a database.
  
  I connect with the orattadmin of the user (which belongs to groups both timesten and ttadmin)
  
  I run the commandes./ttenv.sh and I have the classpath for ttjdbc6.jar in it.
  then I run le./ttisql.sh, and when I try to connect to mydatabase or any other database present in the sample folder I get:
  
  $. / ttisql
  
  Copyright (c) 1996-2011, Oracle. All rights reserved.
  Type? or 'aid' help, type "exit" to leave the ttIsql.
  
  
  Command > Connect "dsn = mytest_ttdb";
  836: failed to create the shared memory data, error 22 store segment
  The command failed.
  
  what I am doing wrong? What can I do?
  
  Thanks for your time

  A data store active TimesTen consists of a single shared memory segment allocated from o/s. The size of this segment is PermSize + TempSize + LogBufMB + ~ 20 MB. This allowance will not allow the o/s unless the 'package' kernel parameter has a value greater than the requested size of the segment. According to the Guide of Installation TimesTen, you set various parameters of the kernel on the appropriate values (memory shared, semaphores, etc.).

  Chris

• How to create the shared library for linux real-time target in labVIEW Windows?

  I use myRIO running linux in real time. In my project, I need to pack some C code, so I tried the node library function call.

  I know that I should use the tools compile cross - compile linux on Eclipse to compile c code in linux .so library. But the problem is that call library function node does not recognize the .so file because my labVIEW runs on a Windows PC.

  What should I do to fix and how to combine C code with labVIEW during programming for devices shipped as myRIO?

  Basically, you must also create a Windows DLL that exports the same functions. These functions can be empty stubs if you do not want to run the code correctly on Windows, otherwise you will need to consider how to implement the equivalent functionality on the Windows API.

  Then you can write in your node library call as the name of the library ". "*" and the name of the shared library Windows ".dll" while the Linux version is called "name of your library > .so". LabVIEW will replace the * after the comma in the name of library with everything that is the preferred extension shared library for the platform it is running on and therefore load the right shared library.

  Alternatively you can wrap call all the nodes of the library in a structure that contains the node library in the case of Linux RT and all what you want to run on other platforms in the case of default or a case of specific platform, call the conditional compilation.

• Create the shared for VM disk

  Hi guys

  I am very new to VMWare. I installed ESX 3.5 server. Got 2 data stores that are SCSI disks. 1 I use for the ESX operating system and one for virtual machines and data. I want to create a disk that will be available to 2 virtual machines. The goal is to have a shared drive of exchange cluster. Can someone advise me how to on this subject.

  Thank you

  Pradeep

  I use this link whenever I need to do this.

  http://ExchangeExchange.com/blogs/bkeane/archive/2007/07/30/MSCS-Clustering-in-VMware.aspx

• Workload of Orion - failed to create the shared memory

  I am struck after publication using Orion:

  . / orion - run oltp

  ORION: ORacle IO numbers - Version 12.2.0.0.0

  Unable to create a shared memory (orion_setup_shmem:skgmcreate)

  Additional information: 6000

  Additional information: 1

  orion_parse_args: orion_setup_shmem failed

  I use RDBMS_MAIN_LINUX label for the use of orion.

  I noticed a similar question, but that was the 11 series Oracle.

  Can someone please provide an idea on how to solve it? TIA!

  I thought about it (thanks to Sebastian for her, rather). It has nothing to do with the version of Orion.

  I have checked/proc/meminfo and found that HugePage = 0.

  Set it to something (say 100) of the root user: echo 100 >/proc/sys/vm/nr_hugepages and fix it!

• How to create the shared disk between 2 ESXi servers

  Hello

  I created a laboratory with ESXi4.1 and ESXi5.0 machines with a few virtual machines on them on my laptop using vmware workstation 7. Now, I'm trying to add a disk to the two virtual esx hosts so that I can create a store of data through them to do some testing from day to day, but so far I managed to do it. I'm afraid of how would I have accomplished my test laboratory. Can someone help me on this please. Thank you.

  Kind regards

  AB

  beckham007fifa wrote:

  I created a laboratory with ESXi4.1 and ESXi5.0 machines with a few virtual machines on them on my laptop using vmware workstation 7.

  You cannot use just a shared between two virtual hosts of ESXi, but put up some "fake" your iSCSI storage, shared disk which could be executed in another VM on your VMware workstation. Here is a guide how to set this using the free Openfiler: http://rickardnobel.se/archives/26

• Darken the entire photo but to create the highlighted area

  Hi all

  I know this is probably very simple but...

  What is the best way to go for a photo for, say 50% opaque layer and then create a rounded rectangle or circle which is 100% transparent (so the image under/through the circle/layer looks like 100% light?)

  I want to create an image where a small piece is light at 100% but the rest of the image is much darker.

  Concerning

  Frank W

  You can add an adjustment layer that could darken your entire image to as dark as you like. Once you have that layer target of the adjustment layer mask layer and paint with paint black low opacity on the box of the desired highlight image

• Workgroup Windows 7 - can see the folders, but not files in the shared directory

  I have three windows on the same workgroup machines (2 machines Windows 7 [A, B] and [C] XP machine). I have a shared folder on the [A], with many subfolders. When I created first the part, [B] has been able to see all files and folders in the shared directory on [A]. Next, I added several subfolders on [A]. Now, [B] can see new subfolders but not the files in the breast. Why is that happening and how can I solve this problem?

  [A] and [B] are capable of full access to the shared folders on [C]. The permissions on the shared folder on [A] are set to "Everyone" + read/write. I tried several reboots of each machine. Hit "Refresh" on [B] does not make the files appear. It is not password-protected. It turns out that [C] has exactly the same problem as [B], that makes me think there is something to do with the share on [A], but I can't understand it.

  On [A].

  Under sharing advanced > caching, I chose only "the files and programs that specify users are available in offline mode."

  Under [advanced sharing] > permissions, "Everyone" is given full control, change, and read them.

  Under [advanced sharing] > permissions > Add > locations, machine [A] is visible, but are not machines [B, C].

  Any thoughts? Thanks in advance!

  Hello

  Thanks for the reply and keeping the status updated.

  There are options of shares with different depending on whether your PC is connected to a network and what type of network is.

  To share the points with a particular person, choose the account of this person.

  To share with all members of your home group, choose one of the options Group of the House .

  To select libraries to share with all the members of your home group, swept from the right edge of the screen, tap settingsand then tap Change PC settings. (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down, click settingsand then click change PC settings). And then tap or click home group.

  To prevent a file or a folder shared with anyone, press or click the share tab and then press or click stop sharing.

  To change the level of access to a file or folder, press or click on the sharing tab, and then select Home group (view) or collective (view and edit) home.

  If you need to share a location such as a disk or system file, use the Advanced sharing option.

  Change the settings for network, file sharing discovery, sharing public folders, sharing protected by password, home group of connections and file sharing connections.

  To turn on network discovery, file and sharing printers, and public folder sharing in Windows 7

  Control Panel > network and sharing Center > change advanced sharing settings > public folder sharing.

  -Turn on sharing so anyone with network access can open files.

  -Turn on sharing so anyone with network access can open, change and create files.

  Hope this information is useful. Just reply with the results. We will be happy to help you. 
  

• Problem writing files in the shared documents directory.

  Hello

  I'm new in the development of the PlayBook. I am trying to create an application that can save image file within the shared documents directory (so another image viewer application can find). Here is my code:

  var file:File = File.documentsDirectory;
  /////////////////////////
  Try to write a file...
  var jpgEncoder:JPEGEncoder = new JPEGEncoder();
  var jpgData:ByteArray = jpgEncoder.encode (bmp);
  file.addEventListener (Event.COMPLETE, onFile_SaveComplete);
  leader. Save (jpgData, filename);

  I got a file save dialog box when I call «file.save (...)» However, once I typed in the name of the file to save and press the 'OK' button, I got the exception like below:

  Error #2044: Unhandle IOErrorEvent:. Text = Error #2038: file IO error.

  to flash.filesystem::File$/getFile()

  to flash.filesystem::File$/get_documentsDirectory()

  .....

  .....

  The same code run perfectly on my desktop, so I wonder if there is some other restriction in OS PlayBook to stop me from saving the file in the shared document directory? So, should I sign my application with certificate?

  [I read the document and understand that 'File.documentsDirectory' must be writable...] May I have I'm misunderstanding... ? ]

  Best Rergards,

  Hey,.

  Welcome to the forums! This has just been discussed in a previous thread of yesterday. Basically, file navigation dialog boxes are unfinished and lead erros weird whenever you try to use a method that requires a browse dialog box. work around right now must use the FileStream class to write your files on the hard disk of the playbook, until all the dialogues are fixed on the platform.

  Here is the link to the previous thread. inside, you will find the work around the code that you can adapt to your needs. also, there is a little more explanation:

  http://supportforums.BlackBerry.com/T5/Tablet-OS-SDK-for-Adobe-Air/saving-syntax-incorrect/m-p/78610...

  hope that helps. Good luck!

• Sharing network of Windows 7 64-bit problem: other machines may very well write, but the readings are extremely slow.

  I tried to access to the shared both directory a Vista and XP machine via cable connections and wireless to my Win 7 64 bit machine on the part and it is extremely slow to read, but not written.  Not only the directory never takes show all thumbnails, and then open a file that is a couple mb in size as a photo takes more than a minute.  However, if I try to write the same file sharing, it takes only 5 seconds.  This fine all worked until I went from the version release candidate for the final version a few weeks ago.  Shared directories exist on another partition for the relocation does not have their effect.

  Maybe it helps diagnose the problem... I just make a copy of a picture of 4 MB on the part of win 7 on my win xp desktop and it took about 1 minute.  I renamed the file on my desktop and tried to write to the share and it took 5 seconds .  Now, it's strange.  So, this is the bed that would take forever.  The Scriptures are fine, which also explains why my nightly backups on the part of win7 are very good.

  I have a machine to hit the share by using the name of the computer and the other using the ip address.  Both show the same problem...

  I also tried to access files using a mapped network drive.

  I can take a 4 MB file and just copy it on my local desktop and it takes about a full minute.  However, written the same file or even another file of the same size as the part only takes about 5 seconds.

  I ran the Windows 7 network troublshooter last night and used the troubleshooter for incoming connections and he says that it found a problem but that he could not fix and he really had nothing to help me.  But I think he sent the information in Microsoft... not sure.  Next time, I'm at home, I'll run again and try to put all the gross results that I could not understand in this thread.

  I've also updated my driver for the network card and redone permissions and actions several times.  The only thing that I can also say that something can highlight, it is that when I was using the RC of windows 7, I don't have this problem at all.  It was my first installation of Windows 7.  I reinstalled from the final version and all of these files already exist on another partition on the same drive.  I just had to move my public and directories user space on the D: partition and share everything.  Maybe the new facility with something on the existing structures of the file works well with the new facility of the former?  But this does not explain why a new directory and file that create displays the same behavior.  I'm thinking out loud a bit to see if it helps that anyone think that anything...

  I thought about it!

  At least for me, it was a setting in the Advanced tab of the network adapter.  I have a Realtek Gigabit network card and one of the places must have been missed incorrectly.

  I changed the 2 following settings to "disabled", and he immediately started working very well.

  Disabled IPv4 Checksum Offload
  People with disabilities large send Offload (IPv4)

  I have a suspicion that among recent updates of Microsoft for this driver he missed bad... but it was this or the latest driver from Realtek.

  Update:

  In other research I have narrowed it down to make it just the Large Send Offload value.  Is located on "activated" whenever I update the driver Realtek to the latest version.  If I then go and set it to "Disabled", everything works fine.

• Cannot bind to the shared object created with LabVIEW 2009

  I have problems referring to a shared library built from a LabVIEW VI under RHEL 5 with LabVIEW 2009.

  To illustrate the problem, I created a VI with a digital input and output that corresponds to a certain number. Then, I created a draft specification of build to create a shared library with a feature that makes use of this VI square. The shared object is created successfully (square.so).

  When I try to compile a test application written in C, that connects to this library, I get errors in the following link:

  cc  -I/usr/local/natinst/nidaqmxbase/include -I/usr/local/natinst/LabVIEW-2009/cintools build/square.so  test.c   -o test/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(float&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(double&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(double&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_ostream >& std::basic_ostream >::_M_insert(double)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(float&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_ostream >& std::basic_ostream >::_M_insert(double)@GLIBCXX_3.4.9'collect2: ld returned 1 exit statusmake: *** [test] Error 1
  

  Running ldd reveals that liblvrtdark.so.9.0 is used for the execution of labview.

  In order to investigate on what could be the cause of the problem, I have compiled the nidaqmx basic examples, and I don't have an error. Current running ldd as reveals that he uses liblvrtdark.so.8.2 for the view of laboratory, time of execution.

  My suspicion is that some components of labview are being compiled with gcc 3.4 while others are being compiled with gcc 4.1 (which is the default compiler in RHEL 5).

  Any ideas how I could fix the build errors?

  Thanks in advance for your suggestions.

  PS.

  I enclose a tar file with the source files and here are the details of the ldd:

  ldd build/square.so         linux-gate.so.1 =>  (0x008de000)        liblvrtdark.so.9.0 => /usr/local/lib/liblvrtdark.so.9.0 (0x00b9c000)        libc.so.6 => /lib/libc.so.6 (0x00110000)        libstdc++.so.6 => /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 (0x009a7000)        libm.so.6 => /lib/libm.so.6 (0x00756000)        libdl.so.2 => /lib/libdl.so.2 (0x00256000)        libpthread.so.0 => /lib/libpthread.so.0 (0x0025a000)        /lib/ld-linux.so.2 (0x00b80000)        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00272000)
  
  ldd /usr/local/natinst/nidaqmxbase/lib/libnidaqmxbase.so.3.3.0         linux-gate.so.1 =>  (0x00e50000)        libnidaqmxbaselv.so => /usr/local/lib/libnidaqmxbaselv.so (0x00248000)        libc.so.6 => /lib/libc.so.6 (0x00689000)        /lib/ld-linux.so.2 (0x00b80000)        liblvrtdark.so.8.2 => /usr/local/lib/liblvrtdark.so.8.2 (0x00e51000)        libdl.so.2 => /lib/libdl.so.2 (0x00813000)        libpthread.so.0 => /lib/libpthread.so.0 (0x001b0000)        libstdc++.so.5 => /usr/lib/libstdc++.so.5 (0x009c7000)        libm.so.6 => /lib/libm.so.6 (0x00b0a000)        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x0050c000)
  

  Hi mimi,

  I'm happy to report that I managed to get the code to work. I have included some of the steps I experienced the problem in case it might help improve the documentation or future generations.

  In response to your question about the "error 1" reported by do, it's just an indication that detected a compiler error (it probably resembles the return code of the compiler).

  The errors ' undefined reference... @GLIBCXX_3.4.9 "have been narrowed down. The generated labview shared library, the square.so, links to /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 which is a symlink to usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6.0.9. I decided to compare this version of libstdc ++ that included with RHEL:

  strings /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 | grep GLIBCXXGLIBCXX_3.4GLIBCXX_3.4.1GLIBCXX_3.4.2GLIBCXX_3.4.3GLIBCXX_3.4.4GLIBCXX_3.4.5GLIBCXX_3.4.6GLIBCXX_3.4.7GLIBCXX_3.4.8GLIBCXX_3.4.9GLIBCXX_FORCE_NEW
  

  strings /usr/lib/libstdc++.so.6 | grep GLIBCXXGLIBCXX_3.4GLIBCXX_3.4.1GLIBCXX_3.4.2GLIBCXX_3.4.3GLIBCXX_3.4.4GLIBCXX_3.4.5GLIBCXX_3.4.6GLIBCXX_3.4.7GLIBCXX_3.4.8GLIBCXX_FORCE_NEW
  

  So libstdc ++ RedHat does not include a string for GLIBCXX_3.4.9.

  With this in mind, I was able to get my test application to compile using the version of LabVIEW libstdc ++ using the following makefile:

  .PHONY: all cleanCPPFLAGS=-I/usr/local/natinst/nidaqmxbase/include -I/usr/local/natinst/LabVIEW-2009/cintoolsLDFLAGS=build/square.so \        /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 \        -Wl,--rpath -Wl,/usr/local/lib/LabVIEW-2009/patchlib/
  
  all: test
  
  clean:        rm -f test *.o
  

  When you try to run the application, I got the following error:

  ./test: error while loading shared libraries: /usr/local/lib/liblvrtdark.so.9.0: cannot restore segment prot after reloc: Permission denied
  

  But apparently, it's because of SELinux prohibiting the use of libraries shared with moving text.
  This can be disabled by running /usr/sbin/setenforce 0 as root.

  The test application now works!

  See you soon,.

  RW

• KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  Hi dakota25,

  ·         Did you do changes on the computer before the show?

  ·         You are able to install other updates successfully?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

• Error message: cannot copy... Failed to create the directory or file.

  I get the Error Message ' cannot copy (a file USB Store n Go): failed to create the directory or file.»  All of a sudden I started getting error message is when I tried to copy to the USB mass storage: "F:" copy on the removable key worked for a proor very long in this message. And there are a lot of empty space.  The diagnosis says that everything works correctly.

  Dear Clarence

  Try first to unplug the mass storage device, then reconnect and format it by Righ click on Format.

  Then try to paste these files on this USB key again.

  If it fails this time then format your USB using HP USB stick formatting to http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=MTX-UNITY-I23839 tool

  Click Download on the page above. Install it and run it. This will guide you through the steps of formatting your USB drive in a few seconds...

  It is also useful for the repair of the almost dead usb keys.

  Concerning

  Zeeshan Ahmad

• Error 5: Access is denied: failed to create the installation directory...

  I am installing an "Advanced System Care" program I get an error message, Setup failed to create the directory 'C:\users\arthur\appdata\local\temp\is-rukl.temp '.

  error 5 access is denied

  I realized today that I think I got this error on several things, I tried to install recently.  I thought it was a problem with the actual program installer.

  I have no idea where to start even.  Thanks for any help you can give me

  The problem is with the security permissions on the temp of your profile folder. To correct it access %Temp% or C:\Users\[Username]\AppData\Local and right click the Temp folder and choose Properties, then click the Security tab, and click Advanced.

  On the permissions tab, you should see the permissions that are there. There are 3 that are:

  'SYSTEM' with a total control that applies to "this folder, subfolders and files.

  "Administrators" with full control that applies to "this folder, subfolders and files.

  "Your username" in the full control that applies to "this folder, subfolders and files.

  and all 3 must be inherited from the folder C:\Users\[Username]\.

  If you have the option "Include the permissions that can be inherited from the parent to this object" checked, then check it and click on continue if there are problems, then remove the permissions that are not inherited.

  Once you click on 'Apply' and click 'OK', you must have the permissions to write to the directory and you won't get the error messages more.

  Hope this has solved your problem