Create two buttons to stop/start animation (cookies)?

Similar Questions

• Submit to create two buttons appear after that search is performed

  I have a search page that contains a create button at the top of the result table region. However, when I do a search, two create buttons appear: one at the top of the result table area and one downstairs. I use a flowlayout to set the button create. He acts more like PageButtons

  The 2 buttons could appear so that the user doesn't have to scroll down when there are more number of records. It could be more a feature than a problem. You might be able to declaratively remove the appearance of the button in the properties of the result table.

• Using two buttons market timer / stop, need help please.

  Hey everybody.

  I am stil working on my project, and now I'm trying to implement a timer using two buttons market / stop. Everything I do now is when you press start the stopwatch starts and when you press stop I want the timer to stop and display the time.

  Whats happening is when I press start, the timer starts, but when stop is pressed the timer displays a value of say 12 seconds, a second more later I press stop again a value of 14secs arise and it stops at 14.  Now, whenever I press on start it will start at 14 and repeat this process.

  So I think that somewhere, I did not put my right timer.

  Could someone say somethings that I should change in my code.

  They are declared at the top:

  static public boolean status=false;
  static public int count=0;
  static public Timer timer;
  

  Here is my code:

  ButtonField start = new ButtonField("Start",ButtonField.USE_ALL_WIDTH|                          ButtonField.FIELD_HCENTER|ButtonField.USE_ALL_HEIGHT);                          start.setChangeListener(new Listener1());add(start);
  
  ButtonField stop = new ButtonField("Stop",ButtonField.USE_ALL_WIDTH|                            ButtonField.FIELD_HCENTER|ButtonField.USE_ALL_HEIGHT);                            stop.setChangeListener(new Listener2());                          add(stop);          
  
              public class Listener2 implements FieldChangeListener            {            public void fieldChanged(Field field, int context)             {            ButtonField btn = (ButtonField) field;            Status.show("Timer is at" + Integer.toString(count));            status = false;            timer.cancel();            }            }
  
              public class Listener1 implements FieldChangeListener            {            public void fieldChanged(Field field, int context)             {            ButtonField btn = (ButtonField) field;            Status.show("Timer started");            status = true;                try                {                                                timer = new Timer();                                        timer.scheduleAtFixedRate(new StartEvent(),1,1000);                }                catch(Exception e)                {                //do nothing                }            }
  
      private class StartEvent extends TimerTask    {    public void run()       {        if(status = true)              {              count++;                        }        else            timer.cancel();//        count=0;    }    }    }
  

  any help is appreciated

  Thank you guys

  

  Probably best to follow just a matter of a Thread.  So next time, you can start a new Thread with a new question.  However, you should also search the forum before asking questions, that your two supplementary questions have been answered in other posts on this forum.

  Concerning your problem to press the stop and get another moment, I think that you must have application logic that disables the stop button once pressed, until you press the Start button.  For example, you could do by assigning to the time of departure - 1 in the Stop button, and then, when you press the Stop button, he can check the start time and displays a message saying "Timer not started" If the start time is - 1.  There are a number of other ways to do this, I described this method because it is easy to explain.  It is not really how I'd do.

  The best way to set the buttons next, is to add then to a HorizontalFieldManager, then add the HorizontalFieldManager to your screen.

  To stop the button displays the menu, you must set it with the style CONSUME_CLICK, for example:

  ButtonField stopButton = new ButtonField ("Stop", ButtonField.CONSUME_CLICK);

• two buttons with single function

  I want to create two buttons for single function and a single button for a function. For example, I click on button1, the display shows "clicked1".

  If I clicked on button2, the display shows "clicked2". If I click on button1, and then click button2, it will show that "the two buttons are clicked. However, it does not work in two buttons with single function. What is the problem? Here's the code.

  import flash.display.MovieClip;

  import flash.events.MouseEvent;

  var button1:MovieClip = new Button1();

  Button1.x = 200;

  Button1.y = 200;

  addChild (button1);

  var button2:MovieClip = new Button2();

  Button2.x = 300;

  Button2.y = 250;

  addChild (button2);

  Button1.addEventListener (MouseEvent.CLICK, onClick);

  Button2.addEventListener (MouseEvent.CLICK, onClick2);

  var isClicked:Boolean;

  var isClicked1:Boolean;

  function onClick(evt:MouseEvent):void {}

  isClicked = true;

  trace ("clicked1");

  }

  function onClick2(evt:MouseEvent):void {}

  isClicked1 = true;

  trace ("clicked2");

  }

  If (isClicked & & isClicked1) {}

  trace ("two buttons are clicked");

  }

  Copy the following code

  If (isClicked & isClicked1) {}

  trace ("two buttons are clicked");

  }

  should run WHEN you click on your buttons.  That is to say, place it in a function and call that function when you click on your buttons and after that your Boolean values are updated.  (probably then want to reset these Boolean values in the called function).

• I have an iMac (2015).  When I open Garageband, there are only two buttons on the control bar, play and stop.  No record button, rewind or ff.  Where are they and how can I make it appear?

  I have an iMac (2015). When I open Garageband, there are only two buttons on the control bar, play and stop. No record button, rewind or ff. Where are they and how can I make it appear?

  Try to enlarge the GarageBand window by dragging the corners of resizing.

  If she looks like this, your window is small:

  

  You can also try to click the double arrow at the end of the toolbar to reveal more options.

• Need add/update two records on click on the create/update button

  I have a table with 5 columns

  1 ID - primary key

  2 name

  3. address

  4 CARB

  5 KADER

  Now whenever I do an insert in this table to this table I have to add two rows, as shown below:

  1st row - (name1, Add1, 717, 717)

  2nd place - (name1, Add1, 515, 515)

  Name and address values are entries of the screen and the CARB & KADER values are fixed (717 or 515). So for each click on the button create two records needs to be inserted.

  Even when I update to say record particular Carb - 717 & kader-717, I must also update other file too Carb-515 & kader-515. For each click on the update button, so I need to update two records.

  Please tell me as to how I will do this

  Hello

  Why do you not use insert manual and update according to your requirement process?... Gives 'Never' for automatic processing of the DML and try to create a manual process (PL/SQL blocks) and give the condition.

  Thank you

  Lacombe

• OfficeJet Pro 8620: HP OfficeJet Pro 8620 button walk / stop keep flashing

  Condition:

  My Officejet Pro 8620 is about 1 1/2 years and all of a sudden it does not. (FYI: it worked again yesterday). My printer has been connected to 3 PCs in my house wireless, there is another printer (HP LaserJet Pro M401dw) in the same room connected to wifi even. Printer is plugged directly into the outlet. No attempt to replace the cartridge or install the new firmware recently.

  Location:

  This morning, I saw the power button flashes, in an unusual way, it flickered at a rapid pace, about 3 - 4 times per second. When I try to print something, the printer has not been to see the in my list of printers, so I try to touch the screen of the printer, but nothing happened. When I pressed the power button, it stopped blinking, and the HP logo was shown on the screen with a blue bar underneath. Then it was stuck there for hours. Tried the hard reset, use the tools of the firmware, connect my printer to my pc using cable, but my printer is not displayed on my pc (it is not detected by the pc, no new feature and nothing appear in "Printers and devices" when the cable is connected to my PC).

  So I unplugged the printer from the power source and wait a few hours, then reconnect the printer to the socket. The printer has started again with the power button / stop light up and the screen showing the logo of HP with a blue bar below the logo. But this time, after a few minutes, the screen is off, all buttons blink (home, help, back, wireless & power button) at a rate (about 3 - 4 times per second) fast, and after a minute or two, home, help, "back" button and stop brighter wireless (only flashing light up), but the power button keeps blinking. All the buttons and the display do not respond, press the power button / stop is unable to turn off the printer.

  I tried all possible troubleshooting methods suggested on this forum, but nothing to solve it, I hope someone in this forum can help me with this, thanks in advance.

  Hi @DenieceNg,

  It seems that the problems are on the increase, and maybe this could be related to a hardware problem with the printer.

  Here is the document of support for the power problems - printer does not turn on.

  If these problems persist, I would contact HP Technical Support because they may have additional resources that could help lead to a solution. What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection

  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number are displayed.

  If this helps you find a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Photosmart C6180 problem of Power-Up/Power-Down - loops on/stop/start/stop etc.

  I had the C6180 Photosmart wireless connected to a Mac OS X 10.5.6 laptop Macbook Intel and IBM PC XP SP 2 for more than 2 years.  I did have major problems with the printer.

  Recently, I have known a couple of electric in my house.  Since then the printer has turned off randomly once or twice.  Today the printer began to turn off/on/off/on/turned off/turned on etc.

  It lights up and shows the HP logo and process bar animation for one minute, followed by the message: "abnormal termination.  To avoid damage on the button to turn off the printer.  Do not use a wall or the band switch to close.  Press OK.  Then he stops and leaves upward.

  I tried to enter batch Mfg mode by organizing the * and # keys.  It flashes "Mfg commands - enter special Key Combo" for the second of two, then stops and makes a loop on/stop/start/stop again and again.

  I have disconnected all data cables, installs the printer in another room, closes the wifi on both computers and connected directly to the wall on a different circuit to eliminate problems of low power as the culprit.  I swapped the power cable between the wall and the block of the AC adapter with the same exact type of cord of another piece of equipment with the same results.

  I wonder if it is a symptom of a surfboard logic damaged in the printer, or a problem with the AC adapter?

  If it is the logic board, does pay to get it fixed?  An equivalent printer for Mac would cost about $200.  Not to mention that I came just to have stored on cartridges.

  What is a likely indication of a problem of brick AC adapter?  If so, should I spring for a replacement block AC adapter for $30?

  I was not able to find this question in a post on the forum and I was wondering if it's 'Au revoir' to the C6180?

  Thank you for your contribution to this number

  Try this:

  1. If the printer is still on, unplug all rigid and flexible cables at the back of the printer.

  2 unplug the power cord also from the wall...

  3. wait for two minutes.

  4 reconnect the power cord to a wall outlet first.

  5. hold the pound (#) and six 6 buttons.

  6. all by pressing the two buttons, reconnect the power cord to the back of the printer and at the end of two seconds, exit book and six buttons.

  7. turn on the printer if it goes out...

  Let me know the results.

• Synchronization of the configuration shows two buttons

  I have correctly set up Firefox Sync and used Firefox for a while successfully Sync in the PC Windows standard user on 3 computers accounts. However, when I tried to sync the administrative account on a computer, I was unable to. Since then, whenever I'm doing a tools/configuration synchronization, or Tools/Options/synchronization on all my computers, only two buttons to the top: "Create a new account" and "I have an account". There is no button 'Manage account', not related to Unlink this computer from Sync, nothing. I tried all kinds of things and I looked a long time for help on this problem and have not found something to help. If I delete my account just to start and complete synchronization, it will work, or could I be causing other problems by doing this? Any other suggestions? Thank you.

  What do you see in the list of menu drop-down menu button Firefox?

  Is - this set up sync or synchronize now?

  If you have 'Set up sync' then you seem to have lost the configuration of the synchronization and you will have to redo the set up Sync.
  
  If this is not possible, then try to delete (or rename) the armor in the Firefox profile folder file and reset synchronization preferences on the topic: config page.

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

  You can open the topic: config page through the address bar and to search for the prefs that begin with services.sync and reset set user prefs ("BOLD") through the context menu on the default value.

  If it still fails, then you can try a new profile.

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Satellite M40 - 129 stops starting after the Toshiba screen

  Hello
  My M40 continues sometimes to start after the Toshiba screen. He stops and all I see is the blinking cursor. No Error Message or something else and normal boot from the HARD drive. Boot from CD (for example. Œuvres of Knoppix). This problem sometimes occurs and traceable for me isn´t.

  Best regards
  Spoony

  Hey Spoony

  Unfortunately on this path, it is not easy to say why this is happening. Each user has a specific configuration OS and we don t know how your operating system is configured.

  You can boot OS in safe mode? If Yes check what the problem may be a little. If there is anything you can do I recommend you save all your data and preinstall unit using rescue media. If you do this I recommend also to create two partitions.

  Don t compare WXP and Linux startup procedure. As you know that Knoppix using just the RAM and no HARD drive for the race.

• Create a button to run

  Hello. I would like to know how can I create a button 'Run' on a Vi so that the operator should not go to the menu bar start Vi, if possible. Thank you

  Use a state machine and make sure that the VI is set to perform at the opening. Start in an idle state. A VI used by an end user should never be in editing mode or stopped.

• Gmail button (in internet explorer) keeps having moved to the right in my taskbar when I wasn't staying on the left (that's why I first open). How can I get the taskbar buttons to stop randomly to reorganize and stay in order?

  Gmail button (in internet explorer) keeps having moved to the right in my taskbar when I want to keep it on the left (that's why I first open).  How can I get the taskbar buttons to stop randomly to reorganize and stay in order?  I'm talking about the buttons on list of my open applications and documents in Windows Vista.  The bar tasks are "locked", but the button of the window open with gmail in internet explore reappears suddenly in the good moments apparently random.

  It is in the middle part of the taskbar (what I found online so far is on the start menu, the quick launch area or area/system tray of notification, the location of the taskbar in full, either about grouping taskbar - I disabled because I would like to separate).  Can anyone help?  I don't understand why this is happening (or why microsoft would never do).

  Lock the taskbar that it prevents to be moved elsewhere on the office and maintains the different sections where they are - it does not block the tabs showing what is open where they were when they were opened.  There is no control for this function.  Maybe if you uncheck similar taskbar buttons group it will help, but I honestly don't know (and fear he won't make any difference - it may even make things worse).  This also happens to me and I was unable to find an answer.  I think that there are more than just random, but I can't telll you why he moves the legs periodically (sometimes it works fine all day and other days it happens almost immediately).  But still, there is no control for this function, so there is no way to tell him to keep a specific order or to lock an established order, once it has been created.  I suspect that it happens because the notification area icons appear and hide and new programs open and close and which changes the amount of space available and so he rearranges things so that they match and apparently does not always consider the original sequence in which the elements have been added.  Maybe if you remove the Quick Launch toolbar and then add again, the order will reset (but that I know not - probably not in the original sequence, which I doubt is logged nowhere - it did not work when I tried it).

  Unfortunately, I don't have a solution to this problem (and I spend a little time looking for even before myselff posed the question) and do not believe that there is a.  It is also unfortunate that you can't move them so they can be put back in the right order if they change.  I don't think that there is nothing wrong with your system or that it is something that can be repaired or fixed - it's just the way it is and we just have to live with it.  I don't know any 3rd party software that controls the order of tabs open in the taskbar program (but you can check out Bing, Gooogle,www.tucows.comand www.download.com to see if I'm wrong on this - here n "t all when I looked trying to solve this problem for my own system).

  I'm sorry it wasn't what you wanted to hear, but it's like that.  I don't know if it's different in Windows 7.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Creating a button that highlights himself and another object

  Hi all

  I have a specific function, I am applying for my InDesign document for export to interactive PDF and SWF/html format.
  The function that I am creating is:
  I have a picture of a typical WYSIWYG toolbar. I created highlight buttons that sit on top of each icon in the image. When the reader hovers over this image of an icon (with the cursor) I want it highlight and also a piece of text lower on the page to highlight as well (which is a definition and an explanation of the icon). So I want the reversal of my first button action to also trigger another action, which is to highlight a piece of text somewhere else on the page. I managed to get so I put the cursor on the first button (icon image), it highlights, and the text below the page. But this isn't quite what I want. I want the text already exists, then highlight. Basically I want the two buttons to be connected. So that whenever I have fly over a part of the image of a created button, it will highlight, and a piece of exploratory text highlight simultaneously elsewhere on the page. A bit like an infographic. It is surely possible?

  Thanks in advance for your help.

  Generally, the animations as this is to export a SWF file are better be done in Adobe Flash.

  In Indesign that kind of market, too. Only for export as SWF, you can assign to the action "go to the State." For a text block, you can assign different status, where the 1st State would be 'normal' and the 2nd status would be "highlighted". Highlighted applies to the object "text frame", so that you can assign a contour or background. Better than nothing.

  Example: Dropbox - test_highlight.indd

• Creation of Play button to see the Animation

  Hello.

  I made a button by creating a new symbol naming and defining it as a button. Then I edited the four frameworks for my taste. Then I added it to a layer on my calendar by dragging the library.

  I looked at other tutorials on youtube and others, but all code etc. doesn't seem to work. I'm using Flash CS5.

  Once I created the button, what do I do to make him stop the animation at the beginning and play when it is pressed.

  Thank you

  ~ Joe

  in the first image of your main timeline add your button in the properties panel, assign an instance name (for example, btn) and use:

  Stop();

  btn.addEventListener (MouseEvent.CLICK, f);

  function f(e:Event):void {}

  Play();

  }

• Two factor authentication, how to store Cookies?

  So, I began to set up authentication two factor for various connections I have. As a normal practice, whenever I have close no matter what browser I have delete all cookies, and when my computer is shut down I get a Norton scan for cookies and delete them. The problem is that it removes my two factors authentication cookies I need. I tried the implementation of an exception, but the cookies are deleted anyway. How can I set this up to work, that is to say protect specific cookies from deletion?

  In Internet Explorer, it's extremely easy to do. All do you is put a check mark next to "preserve the favorite Web site data"... Fact. In Firefox, you would think is equivalent to "Preferences of Site", but it works the same in IE and cookies are deleted.

  SOLVED.

  I finally thought to try different combinations. Unlike the way I expect it works with the exceptions of cookie, the ' * ' character match only matches the 'cookie name', not all the path for a while in the 'site name'. In other words, *. Google.com will not protect the cookies which are also under mail.google.com. In this case both *. Google.com and *. mail.Google.com are necessary. As an example of the real world, the exceptions that work with Google two-factor authentication, which covers 20 + cookies that must be preserved, are:

  (Once more, the forum I cannot enter the character 'stars' on the keyboard in what appears on the forum as a url)

  (enter starting here).accounts.google.com
  (enter starting here).accounts.youtube.com
  (enter starting here).google.com
  (enter starting here).mail.google.com
  (enter starting here).plus.google.com
  (enter starting here).youtube.com