Create Versions of point dark icons

Similar Questions

• How can I create a lighter and darker version of "Pantone purple non-couche, U ' keep printing costs down?

  Hello

  I need to have a printed business card and I have am unaware of the printing process. The plan includes black and three different purple. In order to maintain low cost printing I need to reassign all objects of the same color PANTONE in Illustrator.  If I had to use Pantone Violet non-couche, U, how do I create a lighter and darker version based on this shade?  Again, the result should be two color printing (black and purple and not black and three purple ones).

  Any help is greatly appreciated.

  Thank you!

  Diane

  You can check if your colors are defined as only two inks by pulling the top of the separations palette, before turning black and purple. If it's done properly, nothing do not show on the other channels.

  

• Failed to create system restore point exception exception c:\windows\system32\shell32.dll,control_rundll,"c:\windows\system32\sysbm.cpl",system

  Original title: I can't do a restore point.

  I get exception c:\windows\system32\shell32.dll,control_rundll,"c:\windows\system32\sysbm.cpl",system what can I do?

  This has happened for a very long time.

  Does really say '... sysdm.cpl "?"

  Is that what the text complete and accurate of what the message said exactly?  (there is no sysbm.cpl in XP, but there's a sysdm.cpl).

  What happens if you click on start, run and enter in the box:

  sysdm.cpl

  Click OK - the system properties box opens?

  What happens if you click on start, run and in the type box (exactly):

  %SystemRoot%\System32\restore\rstrui.exe

  Click OK - is the open window of the system restore?

  What is exactly the process (step by step) you are using when you try to create the restore point and when in the process you see this message?

  I think it's a miracle that the Microsoft support engineer can provide a link to an article when the error message report you is a little out of whack and articles doesn't mention your error message at all.  It's real good troubleshooting or clairvoyance!

  You should also tell us a little about your system:

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

• Unable to create a restore point

  original title: restore

  Hello!

  I am running Vista on my laptop, but I can´t manually create a restore point, because it s disabled by

  What is 'Grouppolice'? And how do I enable it again?

  MVH

  ltq18

  Hi Rifdhan!

  My version of Vista's Home Premium, for your reply didn t resolved my problem.

  I found the solution at http://www.winhelponline.com/blog/restore-point-creation-disabled-by-group-policy/

  But thanks anyway.

  MVH

  ltq18

• When I try to create a restore point, I get this message: Systempropertiesprotection.exe - corrupted file.

  When I try to create a restoration point, a message is displayed on the lower right part of the screen and I get this message: Systempropertiesprotection.exe - corrupted file.
  In addition, it tells me to run Chkdsk. I am doing and not of results. If I search for the file, Systempropertiesprotection.exe happens in several different directories along with one. Record of MUI with the same name. The computer seems to work very well, but my suspicions are triggered. Any suggestions?

  Hi Popo75,

  Let us try the following steps to solve the problem.

  Step 1

  Sometimes the malware could have disabled the files. Try to run an online scan and see if it helps.

  http://www.Microsoft.com/Security_Essentials/

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  If this does not help, try the next step.

  Step 2

  Try to run the Design Checker (SFC.exe) system files and check if the problem persists.  To do this, follow these steps:

  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2. type the following command and press ENTER: sfc/scannow

  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  Check the link for more information:

  http://support.Microsoft.com/kb/936212

  Step 3

  If the problem persists, create a new user account and check if you still have the problem:

  To create a new user profile:

  To create a new profile, you must first create a new user account. When the account is created, a profile will also be created.

  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

  2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on create a new account.

  4. type the name you want to assign to the user account, click an account type, and then click on create an account.

  Check out the link for more information on creating a new account below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer or useful you help others find the answer more quickly.].

• Trace the path creates just a point at each point?

  Hello, recently I have upgraded to the latest version of Photoshop and it worked fine until that for any reason any my trace the path does not create a path of stoke?

  It creates just in points with regardless of the size of brush I selected (as shown below)

  It worked great for awhile til all of a sudden he did this.

  Help, please!

  

  The left and here is the front and next to him (two points) is the after.

  IM think I owe him a few hidden command or something so really appreciate som help with this so I could get back to the thing, I was working on the far right

  Thanks for reading.

  Check in the Bush Panel and make sure that the spacing is checked, in the field of brush tip shape.

• If I create a restore point I have the driver of his old job

  I got this notice:

  "Dear customer,
  You will enjoy its improvement when you use an updated on the pre-installed sound system audio driver
  on your laptop.
  To install the updated audio driver follow the steps below:
  1. Click Start and select Control Panel.
  2. in the Control Panel Home view, click on uninstall a program
  3. Select Realtek High Definition Audio Driver and uninstall the driver by following the instructions
  the screen.
  4 download the driver updated on the Toshiba site
  http://support.toshiba-tro.de/Tedd-files2/0/sound-20080305155003.zip
  5 unzip the downloaded driver.
  6. switch to the folder driver and double-click Setup.exe to start the installation.
  7 follow the instructions on the screen. »

  Can I ask

  If I create a restore before ding, if everything goes wrong I will be able to restore the system and have the former driver of his work?

  The driver file is located in the Device Manager and sound, video and game controllers?

  Thank you very much.

  Peter

  Hi Peter,.

  Yes, if you need to create the restore point before you perform the driver installation, you will be able to restore the system to the point of time at the beginning then you will get the old audio driver on your system.

  I think it's a good idea to create the restore point.

  Good bye

• Failed to create the restore point

  Hello

  I think I can off the coast caused a problem if I ever recover my laptop which is a Pro L450D phone by changing the settings in the system protection box in windows 7.

  I was looking to create a restore point before I upgraded to Windows 7 with service pack 1 and in the creation and restore area I noticed that 3 disks were available to have system protection turned on but only 1 was actually activated system protection? OS Install (C) had no active protection system and I think the recovery partition, WinRE (D) allowing for the protection system was the system disk, I'm not sure at 100%, but of course the 3rd entrance was my DVD player, in any case what I did I clicked to turn on protection for the disk OS Install (C) and an error pops up saying that it was not possible I clicked on ok and when this error went off the screen I noticed that the drive is now enabled for the protection of the system, but he was now also the system disk? and the 3rd disk seemed to disappeared from the region where the available drives appear? I'm a t a loss as to what happened but I think the worst cases, it's that if I ever want to recover my system through the recovery options, I'm not able to by changing the settings of the system, any help on this will be appreciated, I created the recovery disc when I first bought the laptop before I did anything else still with a bit of luck , I hope that this will be my go out the wrong card if I need to use or restore the system in this way.

  Thanks in advance for any help.

  Hi stevieboyfitzy,

  Do you want to create a restore with the built-in Windows software point or what software you used?

  Well, if you are installing Service Pack 1 I put t he of needed to create an additional restore point. I installed Windows 7 Service Pack 1 on both my notebooks and installation was operating normally, no problem.
  In addition, I would like to make a backup of all important files on an external drive such as USB HDD.

  If you have already created the Toshiba Recovery disk that you are on the safe side. In the case where I would go something wrong, you are always able to restore the original settings. ;)

• I m trying to create "expanding bullet points.

  I m trying to create "expanding bullet points", which is an interactive object that expands and display a text or a picture and then click Next, fold. I ve searched among the tools of animation with no result. Is this possible in Keynote?

  You must create three slides and use hypertext links to each slide.

  Right-click the object and select Add link, then select the slide you want to link to.

• Compac presario CQ5504F don't give me a place to create a restore point.

  It gives me no place to set a restore point. All the it geves is restore points generated by computer and no place to install my own. What I am doing wrong?

  In the search programs and files box, type system restore and wait a second. Above to select Create a restore point ant the next window appears.

  

  Make sure the Protection settings are on the disk for which you want to create a restore point. Select the drive and click on create. I don't use it because I keep images on my disks on a storage devive attached to the separate network.

• creating a restore point gives error 0 x 80042308: the specified object could not be found

  What is the specified object cannot be found - 0 x 80042308? trying to create a restore point in the protection system?

  a snapshot could not be created, please check "vss" and "spp" applications for more information event logs!

  Details: the specified object is not found! backup and restore system keeps giving me these messages!

  HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP!

  Thank you!

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 3:
  Try the running System File Checker and see if it helps:
  http://support.Microsoft.com/kb/310747

  It will be useful.

• Failed to create the restore point: XP Sp3; System Restore is on

  Found this on a friends PC trying to go back to a previous restore point and didn't find any.

  • System/enabled - system restore properties shows it monitors the drive C (the only one)
  • Run ChkDsk & reboots
  • Searched and found, System Volume Information, hover over the shows as empty
  • System Restore reinstalled by right click on c:\Windows\inf\sr.inf and choice of installation
  • I tried Safe Mode option but to create a Restore Point is missing
  • Tried to reboot f8 last good known configuration, still the same
  • Tried to search the Web but without success except one referring to HKEY_LOCAL_MACHINE-System-CurrentControlSet-Services------VxD-VxDMon, but this does not exist in the registry!
  • No relevant event in the event log

  OK, so I'm out of ideas now! Can someone please shed some light on this?
  AVG free is AntiVirus software.

  Thank you very much

  Chris

  What works has been uninstall IE8.

  Windows search, System Restore and the laminates in IE6 now work correctly.  The re installation of IE8 then worked with everything works well in the end.

  Thanks for the helpful tips.

• Why my WinXP Media Center will not create a restore point?

  For some reason, I just tried to create a Restore Point manually. I see that none have been created and stored in the past. I also see that it is turned on, because it is unchecked to enable the system restore on the system restore settings. So why, when I check create A Restore Point and click Next and write a description and click on create, make a box that says that system restore is not able to create a restore point? He also says if he please restart the computer and restart System Restore.

  I tried and it does not at all. Just the same thing happen again.

  Fixed! I decided to turn the system restore settings on the Restore page of the system (which will scan all the nonexistent restore points!) and then turn it back on. Now, he lets me create a Restore Point. I called him restore test, and now I see that on the list of the points of restoration as the only restore point. This list was empty before and no days were clouded on the calendar on this page.

• How to create a restore point in the protection of the system in safe mode?

  As topic the question, how to create a restore point in the protection of the system in safe mode?

  Hello

  read a tutorial on the below link for everything you need to know about the system restore

  http://www.bleepingcomputer.com/tutorials/tutorial143.html

  and read this too

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

• I can not create a restore point.

  When I click on the system, System Properties Protection opens. Is there a way I can turn on the system restore and create a restore mode without failure point?

  Hello

  Why do you want to create a Restore Point?

  What is the problem with your computer?

  And you can not create a Restore Point, today, yesterday, or last week, etc.

  You cannot create a Restore Point in history (previous date and time)

  You can create a Restore Point for today, to use at some point in the future.

  See you soon.