4510 question not enabled SIP Codian MCU

Similar Questions

• TMS 14.3.1 played not well with Codian MCU 4520 - bug?

  TMS 14.3.1

  Codian MCU 4.4 4520 (3.57)

  After upgrading from 14.3 to 14.3.1 MSDS that I find THAT TMS is no longer recognizing the Codian as being registered at a Registrar SIP (VCS - C x7.2.2) and active SIP server address is empty.

  As a result, it is no longer allow me to plan only calls SIP; that is to say:

  

  In the above Conference, participants at the Summit must be either H.323 or SIP, participating below place SIP (JabberVideo customer 'business'), as well as participating number 3 (customer 'free' JabberVideo).

  Before the upgrade, I've always had the choice of SIP, H.323, and if necessary, IP, now I have only the choice of H.323 and where appropriate, IP.

  Curiously, when using multi-way, it will connect to the customer external jabber.com as SIP - SIP, while in a scheduled call, he'll be H.323 - SIP and appeal in the VCS - E it actually displays H.323 - H.323.

  I have no problems with the old MPS800; Active listed address in TMS SIP server as per normal, and I can choose to H.323, SIP and IP.

  So, is this a bug?

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

  In the MCU configuration.xml, should say something like:

  user_name VCS.example.com"registrar_name =" example.com"="[email protected] / * /"/ >" "

  The field that is empty in your TMS screenshot ("Active SIP server address") must have been populated by proxy_name value in the confiuration.xml that I can see.

  EDIT: looks like we have made a code change in TMS 14.3.1 when it comes to check the address of the SIP server: in previous versions, read and used TMS 'registrar_name', but from 14.3.1, it reads and uses the "proxy_name" instead.

  Kjetil-

• Codian MCU 4505 content encryption is not possible

  Hello

  I'm having a problem with MCU 4505:

  If I put the SIP trunk to the Codian MCU (to route calls with a specific prefix) for the MCU to TLS instead of TCP, the content channel could not be seen on other participants. I see in the statistics of participants, that the content string is sent from one endpoint to the MCU, but not received from the other particpiants. In the view of the Conference, I saw the following message:

  TX of content: encryption is not possible

  I checked the docs, but the description of this cause is not really free explaining:

  The MCU is unable to send the encrypted video content to this participant.

  If I put the trunk for TCP, no encryption is used and the sharing prentation works as expected. Basically, the encrpytion works fine, because the audio and video channels are received and sent as expected.

  No matter who else knows this problem or ideas how to solve this problem?

  BTW: Versions of software:

  MCU 4505 4.3 (1.68)

  EX60 TC 5.1.4

  Jabber 4.5

  C20 TC 5.1.4

  

  Kind regards

  Paul

  It is noted as a known bound in notes;

  "The transmission of content SIP of the MCU by using the binary protocol (BFCP) ground control is not supported on.

  encrypted calls. To allow content to pass on SIP calls in a separate main video channel, you should

  Disable encryption on the MCU or target endpoint. »

  The MCU supports the transmission of content encrypted on H.323 calls only, but not the SIP.

• Forcemore than two end points to use Codian MCU

  I have a lot of C90s, E20s, 150 points of termination. I wish that the conferences of two or more to always use the Codian MCU.

  Can I do this with model templates.participant conference, or elsewhere?

  It depends on the specificity.

  If you book these conferences, using TMS, then you need to configure your advanced conference Options.  "Use of the external MCU in routing" must be set to "Always, except for point to point" and "Favorite MCU Type in routing" must be set to "TANDBERG Codian MCU".

  If these are Ad - hoc conferences, then what you want is Multiway (i.e. Conference Factory).  However, this requires a VCS.  The Guide deployment of Multiway for more details.

  http://www.Tandberg.com/support/DL.php?id=1119&dir=Deployment_Guides&fn=Cisco_VCS_Multiway_Deployment_Guide_X5.PDF

  Series L (T150) endpoints may not trigger a Multiway call according to the docs, but which may have changed since the doc is a bit outdated now.  They can be attached to a Multiway call however (L6.0 or higher).  MXP requires F8.0 or higher.

  If no one who works for you, your only option is to configure the Codian to create a new ad hoc conference on incoming calls to the conferences of the unknown and then give your a prefix of Service H323 MCU so that all calls with this prefix will route to the MCU and start a conference by using this code.  Make sure that your parent model has digital ID H323 and SIP registration active.

  The Codian in itself is not able to force someone to use for Multisite; This seems to be what you might think from model issues.

• VCS-E calls directly to Codian MCU Auto standard

  How do I create rules of research on my E - VCS to route direct calls to its IP address or hostname to go in-house auto attendant Codian MCU--> my autoatendant has a 31 conference ID and we have 99 registered in my inner - VCS - C so 9931).  We had so many difficulties with external companies, connection using several addressing methods (VCS - eIP ##MCUmeetingID, or [email protected] / * /, whatever).  It is much easier to have external users, type an IP address and be dumped directly in the auto attendant and we can move everywhere where from there.  I don't know everything that the Alias Search and regex and replace the criteria and do not want to cause problems with external courses and Movi SIP calls that we use.  Need help.

  Hi, Frank.  My apologies.  X5.1.1, its under VCS Configuration > search rules > Configuration.  Should be the help alias section here.  Let me know how it turns out.

  VR

  Patrick

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Required Cookies Cookies are not enabled on your browser. Please fix this in your security preferences before continuing

  Cookies required
  Cookies are not enabled on your browser. Please fix this in your security preferences before continuing

  Hi Frank,

  Internet Explorer offers different ways to control the cookies that are stored on your computer. You can block or allow cookies or you can choose the specific sites that you'll accept cookies. When you make these kinds of changes, the cookies already stored on your computer will not be affected.

  1. what browser do you use on your computer?

  2. when exactly you receive the error message?

  Follow the steps in the link below to enable cookies if you are using Internet Explorer.

  Block or allow cookies:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/block-or-allow-cookies

  Note: This also applies to the Windows XP operating system.

  For reference:

  Cookies: Frequently asked questions:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/cookies-frequently-asked-questions

  Note: This also applies to the Windows XP operating system.

  If you need further assistance on this topic, let know us and we will be happy to help you.

• Windows (sometimes) tells me that the anti-virus, I have installed in my PC is not enabled. I press 'Activate now' it lights.

  Hello ' I have a little problem "when Windows starts the windows sounds (sometimes) the anti-virus, I installed in my PC is not enabled and the anti-virus is already registered and activated and when I press"Activate now"it does." any solution to this little problem? the still active anti-virus when this message appears "Windows security alert" and is the anti-virus still running even this alert? TQ

  Hello

  -Which antivirus program is installed on your computer?
  -Did you change your computer, after which the question began?

  Maybe your computer is infected with the virus that prevents you from turning on the anti-virus software.

  I would recommend that you follow these steps and check if the problem persists.

  Step 1:

  Put your computer in safe mode with network, download, install and run Microsoft Safety Scanner and check if the problem is solved.

  Note: You may lose data that is affected while eliminating malware.

  Step 2:

  Check if you can activate the anti-virus ├a the State to clean up the boot program.

  Note: Follow step 7 to your computer as usual.

• Java EE is not enabled so that Websphere monitoring

  Hi all

  I got the following error while monitoring the monitoring of websphere. I gave everything but all the properties correctly by restarting webpshere startup scripts I am facing the below

  error:

  Attached the agent logs in your home reference and java path.

  

  

  Please help me in this regard.

  -Shiva

  Additional accessories:

  • Agent logs.log.zip
  • 
    JavaEE not enabled.jpg

  Shiva,

  To save time if it still does not recommend a case of pension to open as soon as possible so that they can work with you in your local time zone and a webex.

  To the extent where the script what you see that it resembles this AI a websphere integration is done for Caroline.

  We always work with 5.8.1 cartridge or have you you switch to 5.9.x?

  5.8.1 you can see the options in question

  http://eDOCS.quest.com/Foglight/565/doc/cartridge-app/JavaEECartridge-install/ConfigAppServers_JavaEE.018.3.php#416350

  The text that will show you almost looks like someone made integration agent node with 5.9.x, if that was the case that integration with a regular startup script should put text right running. There are also manual integration information that specifies the flags that are used

  http://eDOCS.quest.com/Foglight/5610/doc/cartridge-APM/JavaEECartridge-install/ManuallyIntegrating.6.php#425173

  Golan

• Application of floor on Codian MCU

  Hi all

  I want to know the meaning of the events by Codian MCU log output when endpoint sent a request for floor.

  There are newspapers that I captured after that I sent a request floor MXP endpoint.

  Conference CONFERENCE Info 13959 29/07/2012 17:29:43.254 'Name of the Conference' - set floor participating 1272

  Participant of CONFERENCE Info 13960 29/07/2012 17:29:43.254 1272: grateful request floor

  13961 29/07/2012 17:29:43.299 CONFERENCE Info participant_message_fn 1272: request floor

  Could someone let me know what each line means?

  Best regards and thanks in advance

  Kotaro Hashimoto

  Hi Kotaro-san,

  Third line in the newspapers show the message, it is not sent by MCU.

  It shows the real message received by request IE MCU for floor.

  Not sure what is "fn" stands for.

  Kind regards

  Sagar

• DHCP is not enabled for wireless network

  Hi all

  I have problems with internet connection and a large part of the time, that Network Diagnostics says Windows "DHCP is not enabled for wireless network", then it solves a problem, but I lose the connection several times a day, and each time that do the same fix again.

  I checked the Device Manager settings and DHCP is started and set to automatic, I also ran CMD > ipconfig/all and can paste the results if need be.

  I use a VPN and never had any prior issued connection with it and it seems to be just as hard to connect if the VPN is enabled or disabled.

  Also recently I got the "security defender" virus which has been deleted successfully, the next day of the day it has been deleted, all network cards have messed up, I uninstalled and reinstalled them but that didn't work so I restored my system and that seems to fix the problem, my computer does not seem to run as fast after the virus as before so I wonder if it has an impact on my current problem.

  I use a Toshiba Satellite Pro 660D and Windows 7.

  Hello

   

  Thanks for choosing Microsoft Community. However the question you posted should be better on the TechNet forums. Please post the question here:

   

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

   

  Don't answer if you need assistance, we will be happy to help you.

• T3 with Codian MCU

  Is it possible to run a system of T3 with a Codian MCU.

  On Cisco Live in London one saw a new 53xx Codian MCU, anyone know if TIP will run on this new platform.

  Alex

  Sent by Cisco Support technique iPad App

  Hello

  It is possible to have the system T3 to a Codian MCU conference join.  But note that the experience and the type of diagram you see will be very different from when you use the telepresence server.

  With respect to the MCU, 53xx, I think that it does not support the TRICK.

• Cannot connect to the Codian MCU 4550

  I have a client who has a 4550 Codian MCU.  They recently had their lines ISDN, replaced by the local Telco Co. and since then the admins MCU have not been able to connect to implement calls.  They can reach the web interface, but can not go further.  I had to try and telnet/ssh into the device and run a password admin clear command but couln t connect, giving them the return "connection refused".  I have them also trying the connection by default where they do not have reset it and it didn't work.  Is anyone in this forum know of another way to get with admin rights and rest the two other accounts?

  Hi Shane. Telnet or SSH is not available on these units. If they can't get into the unit with the admin password, then a console reset_config may be your best bet. Also do not know why change of ISDN lines would this Holy as these microcontrollers have no direct ISDN connections.

  VR
  Patrick

  Sent by Cisco Support technique Android app

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• JavaScript is not enabled a number of applications, including the synchronization.

  I am informed by a number of applications (including FireFox Synch) that JavaScript is not enabled. I use FireFox 33.0 Tablet ASUS running Windows 8.1. I have re-uploaded and UN/re-installed FireFox several times. These applications have run on other computers windows without any problem.

  It worked

  Re-extract files from the zip archive and fixed it... now works.

  Thanks for the help!