Re: Factory Reset on AT200 but always ICS
Hi all
I bought an AT200 a few months ago and updated to ICS a few weeks ago. I did a factory reset today and after that ICS is always running on my tablet.
I thought after resetting my device it will be Android 2.3 race as he did after that I bought it, or am I wrong?
Hello
Resetting the data does not change the system software that you are running.
He re - installs all simply what you have on your device "fresh."
So, if you had ICS and a data factory reset you would just again a new installation of ICS.
Tags: Toshiba
Similar Questions
-
Somone please, Im trying to Factory Reset my laptop but this always this thing, how can I fix. My other problem is my brother installed 64-bit windows 7 only 2 GB of ram that the problem is that I can't reformat.
Utility factory restore are produced by the manufacturer of the computer, then your best bet is to check your user manual, support site for the manufacturer of the computer and the user forums that they run.
Please note that this thing still shows does not appear.
-
Factory reset loading failed Windows 7
I have tried factory reset my netbook, but I get a window saying "Windows must reset" I have reset it. Then he goes back to the implementation of services of another window pops up saying "Windows encounter a problem" whenever I turn on my netbook. I need help
I'm sorry. If you can not complete erecovery via the Alt + F10 boot process, you have two options. The first and far the easiest if your time is worth anything whatsoever, is to buy a recovery stick Acer here http://store.acer.com/store/aceramer/en_US/eRecovery I'm not sure of the cost, but should not be too.
The second is free, but a lot of time. You can download and change a Win7 32-bit image that can be put on a bootstick using the Microsoft USB - DVD tool - but the process is a bit complicated for Windows iso starter as you'll see here http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/where-can-i-download-the-... In addition, you will probably need to download Acer drivers specific to the d257 to make it work properly again. And finally, Microsoft must activate the operating system via the serial numbers on the bottom of the netbook - not hard to do, but an additional complication, however.
Sorry the process erecovery outside of Windows doesn't seem to work for you.
Jack E/NJ
-
If I have my Mac factory reset can I download my Adobe CC once again, as I only have one profile?
I need to factory reset my Mac but use it to say that I would have used my only or can I download it again on the same machine?
You can install cc on an unlimited number of computers. the only practical limitation is that you need to access the computer to 'sign-in' on any computer that you want to use with cc.
So yes, you can reset your computer without problem. You can logout of cc before restoring it, but even if you forget you can disconnect from your computer no more-non-existent after reset using a new connection attempt.
-
I have a pavilion dv7-6b50ei notebook pc purchased 2012. He always gives a command prompt pop up who don't stay long enough to read. I felt too there is a virus on it that my anti-virus did not solve so I tried the factory reset, but when I restart and press F11 it gives an error (something like a boot... is missing). so I tried my recovery disks. CD 1 of 4 ran fine but disk 2 continues to stop with an error. Now, the laptop will not charge because I think that the operating system was formatted during the recovery and do not know what to do. I feel disc 2 is bad too because he also gave an error trying to copy on a USB key. I also tried an external dvd and run the hp hard disk test; the hard drive passed the test. If I can get a new set of recovery discs, it would solve my problem. In addition, I look forward to ideas. Help, please.
Hello
There are two options available.
1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office). They will also recreate all of the original scores, including the recovery Partition.
2 another option that you might consider is to create your own Windows 7 installation disc.
Before you try the following, make sure that you can still read all the key character product activation 25 on your label Windows COA (5 blocks of 5 alphanumeric games).
An example of a COA label can be seen here.
You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here. The source of the Windows Image is Digital River.
Windows 7 Home Premium 64 bit SP1.
Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx
You may need, additional drivers and software are here.
Kind regards
DP - K
-
I was forced to factory reset, but now I can't do anything about it is updated
I had a virus that forced me to the factory reset, but now I can't update anything, error 0 x 80070057 I get n missing or corrupted registry. . troubleshooting of said Windows upgrade fixed it but same thing happens, ive tried for 3 days to know how to repair pc mt. . someone has ideas, / I have a v5 - 572 windows asipre 8 / 8. I have tried everything recommended windows but always used to complete updates thre worn upgrade n night n download it was still ongoing. Obi Wan help me lol
[Please do not quote or copy/paste my posts in your responses.] Just answer by number. [Thanks.]
REPOST...
1a. is Norton Backup installed yet and if so, do you use it?
1B. you purchase & install Norton Backup or is preinstalled on the computer when you bought it?
2 have you ever run the Norton Removal Tool and McAfee Consumer products removal tool you bought the computer in November of 2013?
3. do you have backups of all the "registry cleaners" changes (e.g., McAfee QuickClean) changes to your computer since you have done the Reset this month?
4 KB3087038, KB308,7039, KB3086255, KB3087918, KB3084135, KB3069114, KB3074229, or KB3082089 listed in installed updates (not updated story [1])
5. How about KB3000853, KB3008273, KB2973544, KB2917499, or KB2871389?
=======================================================
[1] Control Panel | Programs and features. See installed updates (in the left menu) -
I need to know if I have a network problem or a hardware problem? My iphone 6 does not service and always looking, the wifi works. Phone has never been damaged. Sprint can't fix it, they think that its hardware problem. Factory reset did not work. Please advise?
isoldier86 wrote:
I need to know if I have a network problem or a hardware problem? My iphone 6 does not service and always looking, the wifi works. Phone has never been damaged. Sprint can't fix it, they think that its hardware problem. Factory reset did not work. Please advise?
Get help with hardware features on your iPhone, iPad and iPod touch - Apple Support
-
IPhone 6 64 gb
iOS 9.2.1
The phone says no service but the SIM card works, everything in the phone works except the flash still lights up and flickers sometimes before becoming stable but who don't mind not 'that' much, ive tried factory reset and everything, ive also open the unit and looked for signs of damage, the phone knows there is a SIM card in the phone , but he never says the name of the carrier, also after the restart he said looking and does not stop until I have remove and reinsert the SIM card.
You can restore the factory state after an iTunes backup
If this does not resolve the problem then you may want to align on Apple or an approved repair shop
-
I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but
Sorry, but the restriction password cannot be reset, it is part of the backup and restore a backup that was taken after the restrictions were activated, restore this code again.
You will have to start without the help of the data backup, configure the phone to factory settings and start over. Follow the steps mentioned in this article:
Use iTunes to restore your device to factory settings - Support Apple iOS
If you lose or forget your password restriction, you must erase your device and then put it up as a new device to remove the restriction password. Restore the device by using a backup does not delete the access code.
copied from: Sur les Restrictions (parental control) on iPhone, iPad and iPod touch - Apple Support
-
Factory reset product key now need but also used laptop wallpaper
Factory reset product key now need but also used laptop wallpaper
Hello
If you use manufacturers recovery media that you don't normally need to put product Kety on the laptop
Contact the manufacturer of your laptop to this topic
as you have a preinstalled OEM license Vista that is all the help we can give you
-
I'm at the stage where I should be able to load Windows. I don't care if I lose all my files etc.
I hope someone can get to safe mode or some kind of reset where I can start everything again.
I use windows 7
Procedure A:
Turn on PC
Wait,
Motherboard ASUS screen, (ignored)
Black screen with message: BOOTMGR is missing. Press Ctrl + Alt + Delete to restart.
Steps in scenario b:
Turn on PC,There is a screen of ASUS motherboard for less than one second,
I can press F8 or del to enter this menu.
That shows a menu, please select boot device:
-SATA: ST30...
-SATA: ST31...
-Access configuration
Choose any SATA translates BOOTMGR is missing.
Enter the configuration doesn't have a lot of options and I can't access safe mode.
So I'm all out of options.
I want to do a factory reset or similar. Please help ASAP
There's probably a way to initialize the factory restore, but it varies depending on the brand. Let us know the brand of your computer and that we are able to help you.
On a computer Dell, for example, by pressing F11 at startup Initializes the factory restore.
-
Iendupwithsentaceslikethis - I have reset the mac, but it is always the case please help!
Latest version CC
Richard
Solved the problem - I just changed a Chinese document. I copied the milling guide in a new document.
-
If I used a creative combination on an old computer, then installed in my new computer but had to do a factory reset on computer; I could still install Creative suit on the same computer even after factory reset with the CD?
Yes, you should be able to reinstall, but if you can you should disable before resetting the machine. Otherwise, if the two license activations were used and no reset you will need to contact Adobe Support by chat and ask them to reset your activations.
Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.Serial number and activation support (non - CC) chat
http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC ) -
My Mac Pro was factory reset now it is coming with flashing? And when if and when I passed it will choose the network and I can't go beyond what I'm doing
The flashing? the Mac is to tell you that it is unable to produce a valid system for starting.
Try to make a recovery of the internet start-up as described in OS X: on OS X Recovery - Apple Support
Looks like your hard drive is dead.
I hope that you have a backup.
-
How can I only restore contacts and calendar but not the system after factory reset settings?
Hello
I have an iPhone 5. I forgot the password of restrictions long ago and no backups prior to that date. I want to do a factory reset. How can I do this while keeping a copy of my contacts, notebooks, lists and schedules, so I can re - sync after the reset? I don't want to re - sync system settings that my backup plays up and want to do a clean install of the main parameters.
All advice appreciated.
Chris
You need to store your contacts and calendars on your computer or Cloud Computing service.
AR you not do?
Maybe you are looking for
-
I cannot set the outgoing port Thunderbird 38.0.1.
Thunderbird 38.0.1 does not allow me to set the outgoing port, parameters of account or in the Assistant accounts again. To be able to do was my only reason for considering change of Qualcomm Eudora. This flexibility is apparently available in earlie
-
If I transfer the application to Ninja Stealth Drive for MacBooks folder it works from there?
If I transfer the application to Ninja Stealth Drive for MacBooks folder it works from there?
-
Satellite Pro A200 and Windows XP 64-bit possible?
I am the owner of this laptop & I wonder if it is compatible with Windows XP 64-bit. I work with 3dsmax which does not work on Vista (32 or 64 bit).Y at - it problems with the drivers & where I can find drivers for 64-bit Windows XP?See you soon
-
Impossible to uninstall air adobe on my system
I can't uninstall my computer adobe air. I am running windows vista
-
* O.T. > fictitious user account deletion I have windows 7, on reboot, a fictitious user account appears. I remove it in the (add or remove user account) article, but upon reboot, it is always. How can I remove it permanently?