creating a task of Java SDK revertToSnapshot

Similar Questions

• VCD API 5.1 java SDK task getProgress

  Hello

  I try to get the status of a task that has been submitted to a VCD. The Java SDK 5.1 documentation, I see this, for the task class:

  java.lang.Integer getProgress()

  -Returns the status of the task.

  But I'm at a loss to understand what is the value of the integer returned average? know how to interpret the integer value as what the task status? I see no explanation for this in the documentation. Beats me.

  I'm looking for a means to know the status of the task so that I get a return type of "TaskStatusType" (which has values

  [QUEUED WAITING, PRERUNNING, SUCCESS, RUNNING, ERROR, CANCELLED, INTERRUPTED]). But I don't think I see any method in the class of task that would bring me the TaskStatusType status for the task.

  How would I do that?

  Thank you

  REDA

  Never mind. I thought about it.

  TaskType taskType = task.getResource ();

  String taskStatus = taskType.getStatus)

  is what I need.

• How to create a BPEL Process task using java code

  Hello
  
  I created a BPEL process (for creating task), in which my requirement is that I need to create a task based on some inputs and assign it to the user in partucular and then get out of this flow.
  
  earlier, I felt that I will use the human task activity. but when I use that task will be created in the same process and proceedings will be stuck on there until human intervention (the BPEL process waits for the result.).
  
  is it possible that I can use Java activity and create tasks from java code, 'I know how to assign a specific user task. Please tell me.
  Abhishek
  
  Published by: abhishek on April 25, 2011 12:42 AM

  Hi Abhishek
  1. you can try this alternative approach and it should work.

  2. basically, most of the BPEL process eventually auto generated Web services (.) WSDL). When we create a BPEL process, everything we do is give diagram of input, output schema and creates a bpel process with the default operation named as "process" in all the old versions as up to 11.2 SOA (and maybe before). BUT SOA 11.3 from, we can create a process BPEL, with our own WSDL and our own scheme. There is no restrictions like having only a single operation named 'process', etc.. In any case, what I mean is, each BPEL process ends up as a WebService, with entry and exit of the payloads of XSD.

  3. from the JDeveloper itself, locate the .wsdl for your BPEL process under the Workflow project. Create a new project of Proxy customer service Web and generate a customer for this wsdl Web service proxy. This will create you Service, Port and JAVA classes equivalent payload theoretically in your case taskpayload.xsd with these 4 items you have. Ignore the full blown the HumanTask which has all the system elements and attributes of a task of bpel. All you need is to undertake a task with your own payload data. Create a simple Client Java (EJB or Servlet later to make more flexible). In this Java client, retrieve the Service object in the proxy and port. Then instantiate the java class that represents the payload. Set 4 values you want and set the user name, etc. You may need some adjustments for the setting of the user. Then the port invoke otherwise (go your java object here).

  Sample code snippet
  prepare the message for BPEL of appeal; Define the fields that can not be null
  MyPayloadRequest myPayloadRequest = new MyPayloadRequest();
  myPayloadRequest.setInitiator("");
  myPayloadRequest.setTitle("");
  myPayloadRequest.setEmployeeName("");
  myPayloadRequest.setEmpContact("");

  web service client Get for BPEL receive point and call: first generate client proxy
  MyBPELPProcess_client_ep serviceClient = new MyBPELPProcess_client_ep();
  MyBPELPProces proxy = serviceClient.getNewMyBPELPProces_port ();
  proxy. Process (myPayloadRequest);

  Please note that you can also use the SOA workflow API and the Manager back call personalized for this first task classes. In this class, you can have the methods of the interceptor, which is called each time a task is initiated, saved, Submit, approve etc etc (all events essentially). This gives you access to all the objects in a workflow with full charge blown. So you can always get the data you pass above and in this custom class, the value of the user, date/time etc..

  It's just a different approach you can try.

  Thank you
  Ravi Jegga

• Java sdk example programs

  I am trying to collect "ListAllvApps.java" code in vCloud Java SDK and run it. Everything that I try to run gives an error about the "FakeSSLSocketFactory" Code and the output is below.  Name of the Java application is "Vapplist".  Only to learn java so be gentle.

  

  Code:

  /*
  * *******************************************************
  * Copyright VMware, Inc. 2009-2010.  All rights reserved.
  * *******************************************************
  *
  * WARNING. THIS PROGRAM IS PROVIDED TO YOU "AS WHAT ' WITHOUT
  * WARRANTIES OR CONDITIONS # IF ORAL, WRITTEN, OR ANY
  * EXPLICIT OR IMPLICIT. THE AUTHOR SPECIFICALLY # DISCLAIMS ANY IMPLIED
  * WARRANTIES OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY # QUALITY,
  * ABSENCE OF INFRINGEMENT AND APPROPRIATENESS HAS A PARTICULAR PURPOSE.
  */
  package com.vmware.vcloud.sdk.samples;

  import java.io.IOException;
  import java.security.KeyManagementException;
  import java.security.NoSuchAlgorithmException;
  import java.util.HashMap;

  Import org.apache.commons.httpclient.HttpException;
  Import org.apache.commons.httpclient.protocol.Protocol;
  Import org.apache.commons.httpclient.protocol.ProtocolSocketFactory;

  import com.vmware.vcloud.api.rest.schema.ReferenceType;
  import com.vmware.vcloud.sdk.Organization;
  import com.vmware.vcloud.sdk.VCloudException;
  import com.vmware.vcloud.sdk.VcloudClient;
  import com.vmware.vcloud.sdk.Vdc;

  /*
  List of all the vApps
  *
  */

  public class Main {}

  Public Shared Sub main (string args []) throws HttpException,
  VCloudException, IOException, KeyManagementException,
  {NoSuchAlgorithmException}

  If (args.length < 4) {}
  System.out
  .println ("java ListAllvApps vCloudApiVersionsURL 1.0 user@organization password");
  System.out
  .println ("java ListAllvApps https://vcloud/api/versions 1.0 user@System Password");
  System.Exit (0);
  }

  Implementation for SSL access. Do not use production environment
  Https protocol = new Protocol ('https',
  ((ProtocolSocketFactory) new FakeSSLSocketFactory(), 443);
  Protocol.registerProtocol ("https", https);

  Client connection
  VcloudClient vcloudClient = new VcloudClient(args[0]);
  < String, ReferenceType > HashMap orgsList = vcloudClient.login (args [2],)
  args [3], vcloudClient.getSupportedVersions (.get(args[1])));

  Course of tree and print out all the vapps
  System.out.println ("listing all the vApps");
  System.out.println("---");
  {for (orgRef ReferenceType: {orgsList.values ())}
  for (vdcLink ReferenceType: Organization)
  .getOrganizationByReference (vcloudClient, orgRef)
  {(.getVdcRefs())}
  for (ReferenceType vAppRef: Vdc.getVdcByReference ())
  vcloudClient, {vdcLink) .getVappRefs ())}
  System.out.println (vAppRef.GetName ());
  System.out.println (vAppRef.getHref ());
  System.out.println ();
  }

  }
  }

  }
  }

  _____________________________________________

  

  Clean and build output-

  init:
  LIFO-clean:
  Update property file: /Users/tkraus/NetBeansProjects/vapplist/build/built-clean.properties
  Delete the Directory/Users/tkraus/NetBeansProjects/vapplist/build
  clean:
  init:
  DEPS-jar:
  Created dir: / Users/tkraus/NetBeansProjects/vapplist/build
  Update property file: /Users/tkraus/NetBeansProjects/vapplist/build/built-jar.properties
  Created dir: / Users/tkraus/NetBeansProjects/vapplist/build/classes
  Created dir: / Users/tkraus/NetBeansProjects/vapplist/build/empty
  Compiling 1 source file to/Users/tkraus/NetBeansProjects/vapplist/build/classes
  / Users/tkraus/NetBeansProjects/vapplist/src/com/vmware/vcloud/sdk/samples/Main.java:50: cannot find symbol
  symbol: FakeSSLSocketFactory, class
  location: com.vmware.vcloud.sdk.samples.Main of the class
  ((ProtocolSocketFactory) new FakeSSLSocketFactory(), 443);
  ^
  1 error
  / Users/tkraus/NetBeansProjects/vapplist/nbproject/build-impl.xml:531: the following error occurred during the execution of this line:
  / Users/tkraus/NetBeansProjects/vapplist/nbproject/build-impl.xml:261: compilation failure; See the error output of the compiler for details.
  BUILD FAILED (total time: 0 seconds)

  Hello

  All samples require the FakeSSLSocketFactory.java.

  Just drag the FakeSSLSocketFactory.java in the com.vmware.vcloud.sdk.samples package.

  You can find this FakeSSLSocketFactory.java in the vcloud-java-sdk-samples-1.0-sources.jar.

  Kind regards

  Rajesh Kamal.

• Stage of JavaFX Builder 1.0 error: could not create the Virtual Machine Java.

  Hello
  I have installed JavaFX scene Builder under Windows 7 x 32. The installation process is OK, but when I try to launch the app it crashes and displays an error that says:
  "Error: could not create the Virtual Machine Java.".
  Error: A fatal error has occurred. Program will exit. »
  
  I installed JVM 7u5, JDK 7u5, JavaFX SDK 2.1.1 JavaFX 2.1.1 (Java EE JDK + Glassfish) I would be grateful if someone could tell me if there is something missing. I reinstalled almost all software java several times, but without success.
  
  Kind regards!
  
  Published by: 942925 on June 26, 2012 10:23

  Hello

  This message appears usually when the JVM cannot allocate sufficient memory. It may be the consequence of the stage Builder set - Xmx1024m command line: this is currently followed by default TLD-4515 and will be fixed in the next few weeks.
  For the time being you can give a try on a system with more memory. Moreover, what is your current hardware configuration?
  Concerning

• How to create a task DAQmx LabVIEW?

  I want to create a new task DAQmx in LV I used "create new task" VI in Bt NV. I want to see the task created in the list of tasks MAX also.

  There is no connected device. Its just simulation.

  Use the task to save DAQMx.

  http://search.NI.com/nisearch/app/main/p/bot/no/AP/global/lang/en/PG/1/q/DAQMx%20Save%20Task/

• Can I create two tasks of IA using the same unit of data acquisition?

  Hi all

  Sorry for the question of gumby, but I'm new to all this stuff DAQmx, and I'm trying to understand how it all works.

  I use a USB-6229 with LabVIEW 8.6.1.

  I would use 30 lines HAVE to monitor 30 voltage remote signals.

  I would use the other two lines of AI to perform input voltage independent tasks.

  I tried to create and start the two tasks, but I get an error message when I try to start the second task.  He tells me that the resource is not available.

  What is the cleaner way to configure things working for me?

  Thanks in advance.

  -FB

  Hi diarmaede,

  You can only create one task to HAVE on your card. Read all your DO this card in a loop. You can divide the result and send it to different loops to work on it.

  It will be useful.

  Mike

• Java with Minecraft error "error: could not create the Virtual Machine Java.»

  When I try to open Minecraft SP, it won't let me open and there is a message saying:

  "Error: could not create the Virtual Machine Java.".
  Error: A fatal error has occurred. Program will exit. »
  How can I solve this problem?

  Hello

  What is the operating system installed on your computer?
   
  You can ask your question on the Minecraft forums for assistance. Check out the following link.
  http://www.minecraftforum.NET/viewforum.php?f=1002

• Need to create a task sequence for deploying Win - XP in MDT 2010

  Hello

  I'm having the lab for MDT 2010 configuration, now I need to create a task sequence for deploying operating system Win - XP with MDT 2010. Is it possible to create in MDT 2010 if yes please let me know the steps.

  It helped me http://www.edutechnow.com/?p=122

• Java sdk support

  Hello

  can someone tell me up to which version of the java sdk, we can use in blackberry.

  Java BlackBerry os is based on j2me, which is in turn based on java 1.4 (or 1.3?)
  in any case, you cannot use the api collections unless you implement it yourself.
  basically: use vector and hashtable.

• Application using Java SDK 5.0 compatible with the lower SDK version?

  Hello

  I wanted to know if I'm developing an application using the Blackberry Java SDK 5.0, it would work on slot version 4.3 or 4.2.1? If the current application has features not available on the previous version of course.

  I mean, if I develop an application of basic as a HelloWorld with SDK 5.0, this app works on a phone with SDK 4.2.1?

  Thank you

  Damien.

  The only time where I tried it, I received an error of compatilbility so I would say not in my experience.

  My suggestion is to build with backward compatibility in mind and remember that what you build for 4.2 will work in 5.0 and so on.

• BlackBerry Java SDK v6.0.0 what operating system on the device?

  I installed BlackBerry Java SDK v6.0.0 and the 1.1.2.201004161203 - 16 BlackBerry Java plug-in for Eclipse.

  What Op system will run applications compiled and delivered with the Java SDK v6.0.0?

  It's just a ready version for OS v.6 or Apps running on OS v.5.x?

  I've compiled packed etc and tried to load my file ALX on my BB I get;

  "No applications can be found. Your file may contain applications that already exist... "etc".

  Google has been, and it was suggested that I uninstalled BB Desktop, cleanregistry etc., downloaded the latest version. Done, but no joy.

  Thank you.

  all devices are compatible, but not upward.

  in other words, an application compiled with os 6 will work only on the OS6 devices (simulators).

  If you compile with 4.2.1 all devices with OS 4.2.1 or higher, for example OS 6, run.

• How to create a task that runs once a day, immediately after the opening of session?

  Hello, I'm wondering how to create a task using the Task Scheduler that runs once a day, immediately after I have logon.

  The reason is I want to use Bing Desktop to change my wallpaper every day. However, I just want to run the first time I start my computer every day, so it will change the wallpaper. By default, it starts whenever I have to logon. It's annoying, because I just want it to start once a day to change the wallpaper. However, using the Task Scheduler, I put only a trigger to start "at the opening of session' or"once a day." If I choose once per day, it runs about 5-10 min after I login, instead of logon immediately after. If I choose the two triggers, then it starts after each session.

  Basically, I just want the Task Scheduler to launch the program after the connection the first time I connect to the computer on any given day. How can I do this?

  Hello Jeffrey,.

  You can refer to the links below and see if that helps.

  Create a task

  http://TechNet.Microsoft.com/en-us/library/cc720110 (v = WS.10) .aspx

  Modify a scheduled task

  http://TechNet.Microsoft.com/en-us/library/cc778308 (v = WS.10) .aspx

  Change an existing task

  http://TechNet.Microsoft.com/en-us/library/cc766442.aspx

  Please write back to us for assistance and we will be happy to help you come.

  Thank you

• After creating a task, it is not listed in the Task Scheduler Library.

  Hello

  I created a system task to the system log. It was supposed to send an email to me whenever the event is logged.
  After saving it, I wanted to get to the Task Scheduler Library, but it has not been listed. I tried to create the task again, but it is said that a task with the same name already exists. The event took place, and when I looked at the status of the task, it shows the name of the task with the result of success.
  How can I remove / edit the task when I can't? Help appreciated.
  Thanks in advance
  Richard
  original title: event schedule

  There is a small arrow to the left of the entrance to the Task Scheduler Library, click the arrow to expand the list to view tasks created by the system.  Then browse folders to find the one that you created.

  Defragmentation, just for example, is to

  Library of Task Scheduler, Microsoft, Windows, Defrag

• Modeler data SQL cannot find the java sdk

  Hello

  I want to install 4.0.3 - 853 on windows xp 32-bit.

  In the first inning, message "could not find a java sdk SE way...» »

  I had already installed first jre 1.7.0_45 - as indicated on the installation notes page that produces this error message.

  After reading other peoples problems I replaced it with the jdk 1.7.0_45 because the request for enforcement is the path to the java JDK home.

  Still get the same message as above.

  I tried to change the SetJavaHome in datamodeler.conf, but that didn't work or the other.

  I tried pointing the Launcher to d:\oracle\java\jdk1.7.0_45 as d:\oracle\java\jdk1.7.0_45\bin and d:\oracle\java\jdk1.7.0_45\bin\java.exe all to nothing does not.

  On a light off the coast of the chance - like cleaning the windshield when the car won't start - I installed SQL Developer 4.0.3.16.84 in case the treatment was slightly different.

  Same result

  Very frustrating every previous version of the developer and grouped data with java maker has just installed in a few minutes.

  All of the inspiring thoughts / solutions would be extremely appreciated

  Thank you

  Stem

  Ok

  It seems that - maybe - jdk1.7.0_71 high is needed and jdk1.7.0_45 is not acceptable whatever the installation notes which stipulate that jre 1.7 is suitable. Mind the same version of SQLDeveloper says he wants to 1.8, but seems to work very well with 7u71

  I had stayed in 7u45 to minimize disruptions to the installation of 10g of shapes on the same machine which of course do not now

  It's looking no doubt easier to get this working with 7u71 than the other way around.

  Stem