Creating controls in Documaker Studio

Similar Questions

• Time of design and of the dynamically created controls

  I have a project written in VC6 as a project of the MFC dialog box. In a particular area, I dynamically create several (the exact number depends on user input) CNiGraphs. There is also a two CNiButtons that were created at design time using the resource editor. The problem I have is that when this dialog box is open, a message appears saying it is an eval version and the control will go off after 5 minutes. After 5 minutes of waiting, the CNiButtons 2 go inactive (black tower), but the continuous CNiGraphs of work. I have a valid license of MStudio 8.1.6, version but it seems that these 2 buttons do not recognize the license. There are also other buttons from the moment of conception of the project, but these have no problem at all. When you create the dynamic creation of the CNiGraphs, give them a valid license string, and I was wondering if there is a problem with the time created and dynamically controls created in the same dialog box to design. Anyone know?

  I don't remember, but I can have created these 2 CNiButtons when I was with only an eval license. (All others were undoubtedly create when I got a full license) Could have an impact on them? I have a vague memory of reading somewhere that DTC create controls to check the license when they are created in the designer and store that info in them license. If this is the case does anyone know an easy way to update the license stored in control? I rather not just delete it and Add again because I would avoid having to redo the tab order (unless someone knows how to easily insert something in the middle of the order of tab instead of having to click through all the controls in the correct order)?

  In addition, I don't know if this would affect anything, but the project was originally built with ComponentWorks 1.0, we were forced to move to MStudio when we met a few bugs in CW, so all controls were originally CW controls which have been converted into control of CNi. I doubt that this is so like everywhere else, we changed during controls is not a problem, but I'm ready to try the suggestions.

  Hi JC,.

  I hope you had a good weekend!  I'm glad to hear that you're back running.  Add the extra button was, in fact, causing update the licensing information for the other buttons, as you can imagine.  After further research, I found that the license information are stored only the form of the control, and if this control doesn't change in any way (or in your case, adding a new project), he sees no reason when compiling to recreate a link to the license.  However, after the change of control and a new, it updates the link between the license information, which solved this problem in your case.

  I hope this helps, JC.  Have a great day!

• How to share the Win32 Applications created by Microsoft Visual Studio?

  I have a Win32 Application that I created with Microsoft Visual Studio and I want to share with computers that do not have visual studio. How would I do that? I just want to share the application and no other files.

  I tried that but when I share the program compiled with another computer, it says msvcp110.dll is missing

  New - you should probably post this ina developers forum, not a consumer forum.

  http://msdn.Microsoft.com/en-us/library/abx4dbyh (v = vs. 110) .aspx

  "Dynamic link, multithreaded (for MSVCR110 import library." (DLL). you should know that if you use the Standard C++ library, your program will need to MSVCP110. DLL to run. »

  http://StackOverflow.com/questions/10406807/Visual-c-executable-and-missing-msvcr100d-dll

  http://social.msdn.Microsoft.com/forums/en-us/categories

• Incorporation of features within a PDF using Documaker Studio 12.3 SE

  My project team has an obligation to provide the radio button and text field enable/disable features in a pdf generated by Documaker Studio 12.3 during the e-sign process.

  If the radio button 1 is selected, then 2 fields of text adjacent to it are eligible for entry. 2 radio button and adjacent text fields are ineligible and hidden.

  If the 2 radio button is selected, then 4 adjacent text fields to it are eligible for entry. Box 1 and adjacent text fields are ineligible and hidden.

  1o     _______________

  _______________

  2o     _______________

  _______________

  _______________

  _______________

  
  1. this dynamic pdf encoding is possible in Studio of Documaker? You want to provide a definitive answer to the project team and not only my assumptions.

  Currently, we run a script superimposed on the pdf to provide this functionality for customers.

  Or, at the very least, we can encode text fields on a fap in pdf-editable Documaker?

  Thank you!

  Fillable PDF is available in the two 12.4 SE and EE.

  In most cases, the XFA PDF file will have validation and formatting similar to the field types used on the Documaker data entry forms.

  If you issue XFA PDF files, the fields fill out the PDF form will have no formatting and validation in the field.

  Some things like the DAL support not available in XFA PDF files.

  If you are not familiar with the Documaker data entry forms used in Documaker Workstation, you can use the tool to check data entered in DMStudio to see how different types work on field data entry forms.

  Here are the types of fields available on the Documaker data entry forms.

  

  Here's the INI settings that can be used to produce on-screen fillable PDFs.

  

  

  

• Don't vSphere replication create control points which can be selected during the failover?

  Don't vSphere replication create control points which can be selected during the failover?  Or is the latest version of replication, the only option to failover?

  Thank you

  -MattG

  No, this isn't

  You CAN do this with EMC RecoverPoint (although not on a per VM level).

• CHECK CREATE CONTROL FILE

  Hai
  
  How to configure auditing for CREATE a FILE CONTROL?
  
  17:45:07 SQL > AUDIT CREATE CONTROL FILE;
  CHECK CREATE CONTROL FILE
  *
  ERROR on line 1:
  ORA-00969: missing ON the keyword
  
  What the above problem?

  Hello;

  It sounds like a question outside the Oracle (OS?). The listener newspapers could help.

  On your first question, I check the log of my test database alerts. It shows no creation of control files, but it sort of a chicken and the egg, with the database create.

  He shows some intelligence information:

  Mon Jan 02 05:38:59 2012
  alter database create standby controlfile as 'STANDBY.ctl'
  

  Current audits

  audit grant any object privilege;
  audit create session;
  audit alter user;
  audit create user;
  audit drop user;
  audit drop tablespace;
  audit grant any role;
  audit grant any privilege;
  audit alter system;
  audit alter session;
  audit delete on AUD$ by access;
  audit insert on AUD$ by access;
  audit update on AUD$ by access;
  audit delete table;
  audit create tablespace;
  audit alter database;
  audit create role;
  audit create table;
  audit alter any procedure;
  audit create view;
  audit drop any procedure;
  audit drop profile;
  audit alter profile;
  audit alter any table;
  audit create public database link;
  

  Best regards

  mseberg

  Published by: mseberg on July 7, 2012 07:35

• Review: Adobe RoboHelp 11 stopped working Source code control from Visual Studio Professional 2010

  We contacted Adobe for help, but I also wanted to put this question in case someone has had this experience and can quickly provide a solution.
  

  
  

  Environment

  Windows 7 business

  RoboHelp 11.0.3.268

  Generation of WebHelp

  Team Foundation Server

  Visual Studio Professional 2010 Source code control

  Problem

  I am the original author of the Touchstone help system. Last week we started having two colleagues on board to work with me. On their systems, we have configured RoboHelp for working with TFS in Visual Studio using MSSCI provider 2010.

  The initial project was a lot of conditional compilation tags. I removed all the and the expressions and everything checked into Source control. When my colleagues got the latest files from Source code control, and opened the project to Version control, we noticed that their projects were still conditional compilation with other elements that had long been removed tags. After some research, we have removed the CPF and PSS of source control files and let the RoboHelp to create them when we opened the project. That solved these problems - no conditional more don't build tags in the project.

  Last Friday a colleague began to experience significant problems. When it right click on a topic to view properties, RoboHelp has stopped working. She was not able to do anything in RoboHelp since.

  The same day I tried to look at settings of Version control (I had no problem to access all week). RoboHelp crashes as soon as I clicked on tools > Options. Colleague B had the same problem today.

  This morning, I had problem A colleague.

  Bottom line: we are suddenly not able to run 11 RoboHelp.

  Our office employee internal help attempted to run the Visual Studio debugger. We get ' an unhandled in RoboHtml.exe win32 exception [5404]. " We also unhandled exceptions at various addresses with a read access violation address hex location.

  After watching the Willem site that lists updates of RoboHelp, we thought to their installation, but we didn't know whether to install ALL the patches or Patch only 11.0.3. If all the patches, we didn't know whether to install them in a particular order.

  Thank you very much for any assistance that someone of you may provide while we're also waiting to hear from the Adobe Support.

  Carol

  I was recently informed that the patches have changed and you only need to install later.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Error when create control LabVIEW FPGA CompactRIO

  I have error when you try to create a new model of LabVIEW FPGA CompactRIO control project. I tried with LabVIEW 2014 and 2014 SP1 update. This error always occurs.

  Please help me with this.

  Kind regards

  Thang Nguyen

  Hello

  I fix the problem by removing LabVIEW 2014 SP1 and reinstall again. After the reinstallation of LabVIEW, I create the project template.

  Kind regards

• How do I get the name of a duplicated or created control and add a reminder

  Hi all

  According to the number of entry points I need, I duplicate a digital or an input string to the DuplicateCtrl function. My question is, how do I get the name and id of the control that has been created, and how can I assign a callback to it? Alternatively, it would be better to create a fresh ctrl instead of duplicate?

  Thanks in advance!

  Hi TurboMetrologist,

  Why are you trying to get the name of constant control? Remember that you cannot use this name to address control; control names are in fact simply the macros in the file associated with the UIR, include in other words, the preprocessed compiler code and everywhere where the names of PANEL_CONTROL replaces the digital value as parameters to functions (and therefore 'control' parameter is an int value and not a char *)

  That's why NewCtrl () or DuplicateCtrl () functions return a control ID: this is the handle to the new object, the only way to handle it. You will need to store this handle in a nonvolatile memory so that you can access durng life program.

  In addition, there are other ways to assign a meaning to a control to pass on the name of constant control. For example, you can use the callbackData parameter to differentiate the different copies of a control.

  Let me explain with an example. You said that you need several entries (dynamically created that you don't know in advance how many of them use); a solution could be:

  • Design a master copy of a control in the IUR Editor, where it is easy to customize; also assign a callback function, if it must be common to all copies of the control
  • Assign a value to this control callbackData, programmatically for example SetCtrlAttribute (...,..., ATTR_CALLBACK_DATA, (void *) 1);
  • Duplicate the control, and then assign a different callbackData
    for (i = 2; I have< 5;="" i++)="">
    handle = DuplicateCtrl (...);
    SetCtrlAttribute (..., handle, ATTR_CALLBACK_DATA, (void *) I);
    }

  By operating this way, whenever the reminder of control is triggered by any control, it will receive the callbackData assigned, and you will be able to differentiate your code with a simple switch:

  switch (callbackData (int)) {}

  case 1: / / the master controls

  break;

  case 2: / / first dual control

  break;

  }

• Control of the Studio development plots Sun chart

  I paint a chart by using the graphic Studio development command and the following code:

  NationalInstruments.Controls.Plot insertionLossPlot = new NationalInstruments.Controls.Plot ();
  NationalInstruments.Controls.Rendering.LinePlotRenderer insertionLossLinePlotRenderer = new NationalInstruments.Controls.Rendering.LinePlotRenderer ();
  insertionLossLinePlotRenderer.Stroke = Brushes.Magenta;
  insertionLossPlot.Renderer = insertionLossLinePlotRenderer;

  NationalInstruments.Controls.Plot returnLossPlot = new NationalInstruments.Controls.Plot ();
  NationalInstruments.Controls.Rendering.LinePlotRenderer returnLossLinePlotRenderer = new NationalInstruments.Controls.Rendering.LinePlotRenderer ();
  returnLossLinePlotRenderer.Stroke = Brushes.Green;
  returnLossPlot.Renderer = returnLossLinePlotRenderer;

  This. NationalInstrumentsGraph.Plots.Clear ();
  This. NationalInstrumentsGraph.Plots.Add (insertionLossPlot);
  This. NationalInstrumentsGraph.Plots.Add (returnLossPlot);

  This. NationalInstrumentsGraph.Data.Clear ();
  This. NationalInstrumentsGraph.Data.Add (insertionLossPoints);
  This. NationalInstrumentsGraph.Data.Add (returnLossPoints);

  The plots are drawn correctly, but after about 2 seconds, the lines move slightly and their brightness seems to slightly reduce.

  I don't see all the graphic properties which would explain this.

  Can someone explain this?

  From your description, it seems that you draw a large amount of data for the chart at the same time. In the default RenderMode configuration of Auto , the graph allows to detect large, as default data Raster mode. After a short time-out, the graph will see that data are not updated with high frequency and pass automatically to the Vector , who uses anti-aliasing can give diagonal lines and a lighter side.

  To avoid the automatic ignition, just set RenderMode to one value other than Auto .

• Could not create control PalSound PalSound.dll not saved

  Can anyone help with this. Could not create PalSound control, PalSound.dll not saved. Please re - install Paltalk and check the security settings for ActiveX controls. I put all the ActiveX to allow, but it did not work. Now whenever I log into Paltalk I uninstall and reinstall every time.  I see that this fast PC is constantly as a solution, but I'm not going to use a program I don't know or knows something about. I see that people have trouble then uninstall what type of malware is there? They then hmm Microsoft in any page here... I prefer to do the fault manually then I know for sure that it will work.

  Thank you very much
  Shirley

  Hello Shirley,

  Thanks for choosing Microsoft Community!

  You have reached the right forum. Try to solve this problem together.

  If I understand correctly, you have problems with the PalTalk software.

  Please answer these questions to better understand the issue:

  1. Once you get the SpeedyPC pop up?

  2 have you made any changes to the computer before the show?

  SpeedyPC Pro is an innovative third-party software with advanced features to help you optimize your PC.

  Fast PC is not Microsoft.  Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved.

  For problems with PalTalk, you can post the question here:

  www.paltalk.com/PalTalkSite/support/network/networksup.html

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• "APP-OFA-48289: unknown error when creating control systems (immobilization).

  Hello
  
  I have problem
  
  Navigator: Fixed Asset Manager > Setup > system > control systems
  
  When I tried to create in the system controls are error message:
  
  "APP-OFA-48289: unknown error." Please contact your system administrator. »
  
  
  OS: Linux
  EBS: Oracle R12.1.3
  Database: 10g
  
  
  Thank you
  
  Escaline

  Navigator: Fixed Asset Manager > Setup > active system > system controls

  When I tried to create in the system controls are error message:

  "APP-OFA-48289: unknown error." Please contact your system administrator. »

  OS: Linux
  EBS: Oracle R12.1.3
  Database: 10g

  Please see (APP-OFA-48289 unknown error when recording data in system controls form FAXSUSTL.) [ID] 966382.1).

  Thank you
  Hussein

• Create controls inside a container?

  I am now creating a checkbox when running with the following code:
  
  Import mx.controls.CheckBox;
  createClassObject (checkbox, "button2", 5, {label: "Test Case"});
  
  Is there a way to create a button inside another object like a ScrollPane (or something?)? I created a ScrollPane in designtime and want the boxes, as well as the text and maybe draw lines contained in it during execution. Is this possible? If not, is there another container which would allow this?
  
  I try this with the following code:
  
  CounterScrollPane.createClassObject (checkbox, "button3", 5, {label: "Test Case"});
  
  but it does not work.
  
  Any thoughts?
  
  Thank you!

  This should help:

• Failed to create control access tables

  This is the error I got when trying to create a page of access control:
  
  ORA-20001: unable to create access control tables. ORA-01031: insufficient privileges
  
  My user is developer and administrator. User DB schema is dba. what Miss me?
  
  Thank you
  Yivon

  Yivon,

  You will need to grant 'create the sequence', 'create a trigger' and 'create table' privileges for the application schema. The DBA role does not help in this case.

  Scott

• Creating control "choose one of the following options.

  I want to make a control to "Choose one of the following Versions" for the intervention of the user.  Normally I just make a list with the appropriate values and allow the user "choose".  However, I want a Big check, possibly in bold and blue, so that it stands out and makes for a more "user-friendly" front

  If it's a digital control, it is easy to define the size and font of the entrance, but an Enum does not seem to allow this.  So I thought of curious Cousin of the Enum, the ring of text.  It's pretty easy to fill the ring of the Enum and the ring has a RingText.Font property, but when I try to connect something in this property, I get error 1.  While writing this note, I checked to see if I could read it - that works!  [It is said that the police is no 15 "App Font" color is 0, and no 'option' is selected].

  Is this inability to write the property of RingText.Font a Bug or a feature?  Someone at - it an elegant way to approach this problem?

  Bob Schor

  You can have the selected enum, then simply change the size of police through the box at the top. You need to have the selected text to change the text content. Change the attributes of the text required programmaticaly?

  

  Edit: Adding photo for clarity