CHECK CREATE CONTROL FILE

Similar Questions

• installation quick error when creating the control file

  Hai all,

  I have faced the problem when im installing fresh ebs R12
  

  my environment:

  Sun sparc 64-bit

  Solaris 11

  This happens when I try to install R12 charge

  rapidwiz, the error ORA-00821 say: sga_target 1024M value is too small, must be at least 2100 m

  and when you create it control file does not,

  no idea is that with this problem?

  
  

  all prior references to doc:

  R12.1.1: Oracle eBusiness Suite Installation and Notes version upgrade 12 (12.1.1) for Oracle Solaris on SPARC (64-bit) (Doc ID 761568.1()

  
  

  the journal of details below
  

  Logfile located at /oracle/PROD/db/tech_st/11.1.0/appsutil/log/PROD_SMJKT-PRFND01/ApplyDatabase_11071358.log

  ^ M

  |      0% complete ^ M

  / 0% completed ^ M

  -0% complete ^ M

  ------0% complete RC-50004: Fatal: error in ApplyDatabase:

  Creating control files is not

  Cannot run configuration database using RapidClone

  RW-50010: error:-script returned an error: 1

  RW-50004: Error Code when you run the external process.  Check the log file for more details.

  Install the driver database for the PROD instance running

  Connect to an instance is idle.

  ORACLE instance stops.

  Connect to an instance is idle.

  ORA-00821: sga_target 1024M value is too small, must be at least 2100 m

  ORA-01078: failure in the treatment of system settings

  CREATE CONTROLFILE REUSE SET DATABASE "PROD".

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  ALTER database open resetlogs

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  Hello

  Please consult the following notes, because it deals with workarounds:

  R12.1.1: Oracle eBusiness Suite Installation and upgrade version Notes 12 (12.1.1) for Oracle Solaris on SPARC (64-bit) (Doc ID 761568.1)

  See article: known issues

  and

  ORA-00821 during create Controlfile in the ApplyDatabase Phase of the R12.1.1 Installation on Solaris (Doc ID 1116525.1)

  HTH!

  Thank you &

  Best regards

• error occurred in the quick clone (control files creation failed)

  Hi all
  
  I have 2 nodes ERP server running EBS 11.5.10 with 9.2.0.5 database and OS HP UX 11.11
  
  While running perl adcfgclone.pl dbTier
  
  I met the following error
  
  Check that adcrdbclone.sql
  RC-00115: not able to read temp001.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp002.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp003.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp004.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp005.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp006.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp001.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp002.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp003.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp004.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp005.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00115: not able to read temp006.dbf
  Asked by oracle.apps.ad.clone.ApplyDatabase
  RC-00116: error reading of dbf files. Creation of control files will fail.
  
  
  a later part of the log file
  
  
  Creating the database DVP_test control file...
  
  
  SQL * more: release 9.2.0.5.0 - Production on Sun Jan 11 18:29:27 2009
  
  Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
  
  Connect to an instance is idle.
  ORACLE instance stops.
  Connect to an instance is idle.
  ORACLE instance started.
  
  Total System Global Area 598700552 bytes
  Bytes of size 737800 fixed
  419430400 variable size bytes
  167772160 of database buffers bytes
  Redo buffers 10760192 bytes
  
  Created control file.
  
  
  Database altered.
  
  alter tablespace TEMP1 add tempfile ' / oradvp/ora/proddata/temp001.dbf' REUSE
  *
  ERROR on line 1:
  ORA-00959: tablespace "TEMP1" does not exist
  
  
  alter tablespace TEMP1 add tempfile ' / oradvp/ora/proddata/temp002.dbf' REUSE
  *
  ERROR on line 1:
  ORA-00959: tablespace "TEMP1" does not exist
  
  
  alter tablespace TEMP1 add tempfile ' / oradvp/ora/proddata/temp003.dbf' REUSE
  *
  ERROR on line 1:
  ORA-00959: tablespace "TEMP1" does not exist
  
  
  alter tablespace TEMP1 add tempfile ' / oradvp/ora/proddata/temp004.dbf' REUSE
  *
  ERROR on line 1:
  ORA-00959: tablespace "TEMP1" does not exist
  
  
  alter tablespace TEMP1 add tempfile ' / oradvp/ora/proddata/temp005.dbf' REUSE
  *
  ERROR on line 1:
  ORA-00959: tablespace "TEMP1" does not exist
  
  
  alter tablespace TEMP1 add tempfile ' / oradvp/ora/proddata/temp006.dbf' REUSE
  *
  ERROR on line 1:
  ORA-00959: tablespace "TEMP1" does not exist
  
  
  but when I query v$ tablespace temporary tablespace TEMP shows no temp1
  
  even on my production system temporary Tablespace is TEMP
  
  When I see the alert file
  It is said
  
  
  
  Tablespace 'TEMP' #2 found in the data dictionary,
  but not in the controlfile. Adding to controlfile.
  File #143 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00143" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #144 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00144" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #145 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00145" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #146 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00146" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #147 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00147" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #148 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00148" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #149 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00149" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #150 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00150" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #151 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00151" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #152 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00152" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  File #153 found in the data dictionary, but not in controlfile.
  Creation of "MISSING00153" offline file in the controlfile.
  This file can no longer be retrieved, so it should be removed.
  
  
  How can I get out of this confusion?

  Looks like your scene preclone directory is not correct (corrupted), and I think that it is because preclone does not run successfully.

  Either you follow the steps described in the following notes to change the existing to a new undo tablespace or run preclone and copy the files again.

  Note: 431652.1 - how to change the Undo existing Tablespace to a new Undo Tablespace
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=431652.1

  Note: 1013221.6 - RECOVERY of a file of DATA LOST IN an UNDO TABLESPACE
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=1013221.6

  Published by: hsawwan on January 11, 2009 22:17 - change the 2nd number of the Note to 1013221.1 to 1013221.6

• Recovery of control files lost.

  Hello

  I run my database in noarchivelog mode. This is a database of test of pure on my laptop at home.

  Scenario of

  1 copy the existing control to another location on my PC.

  2. open the database and made some changes to the database (create tables).

  3. deletion of the existing control files.

  4 database could not be mounted.

  5. restore control of the location of backup files.

  6. the database is mounted under the mat.

  7. recovered using backup controlfile but could not recover.

  8 save the control to trace file

  9 a created control file by changing the trace file

  10. fixed using the database backup, applied to newspapers and recovered control file.

  My question is why could not recover the database in the first case of a copy of OS control files, but could recover when I manually created control file.

  Thank you

  Hello

  1. as indicated, you are in noarchive logmode (kind only OLR is used for recovery)

  2. now, you closed the database mode compatible and prior (in the db is running), you have taken a backup.

  3. the backup controlfile doesn' the changes you have made

  4. now, when you start the instance and the restoration of the controlfile back, there he changes (blurred) didn't know where in the end. The CNS is lower compared to datafile_header

  5. now you have activated 4 times files newspapers is getting crushed and change is lost at the level of the RSC and it's already emptied to the data files and controlfile (YVERT updated)

  6. then, do you think you are looking for old OLR changing

  Specify log: {=suggested | filename | AUTO | CANCEL}
  /u01/app/oracle/oradata/testdb/redo02.log
  ORA-00326: log begins at change 939321, need earlier change 918423--- here the log is looking for earlier one
  ORA-00334: archived log: '/u01/app/oracle/oradata/testdb/redo02.log'
  

  So he could not be able to open.

  7. When you created new controlfile, he succeeded, since your last stop was in line. so the controlfile read all the headers of data file all in harmony, let me open it.

  Cause is switching to log files

  -Thank you

  Pavan Kumar N

• ORA-00210: could not open the specified control file

  ORA-00202: control file: ' / u01/app/oracle/oradata/DB11G/STANDDB/control01.ctl'

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  Additional information: 3

  ORA - 205 marked during: ALTER DATABASE MOUNT...

  Did you check the alerts log.. ?

  have you checked the control file is available in this mount point... ?

  When you have this error... ? I mean what you're trying to do... ?

• Cannot access control files

  I have a Setup to RAC two nodes using ASM. I did test on it, and when I rebooted my second node, that he started the instance to the second node. I tried to do a manual start via sqlplus and got this error in the subject "cannot access control files. I checked the log of alerts for this node and that was in the background:
  Wed Jul 10 14:32:55 2009
  ALTER DATABASE MOUNT
  NOTE: library loaded: /opt/oracle/extapi/64/asm/orcl/1/libasm.so
  NOTE: the loaded library: System
  SUCCESS: diskgroup ORCL_DATA rose
  ORA-00210: could not open the specified control file
  ORA-00202: control file: "+ ORCL_FLASH_RECOVERY/orcl/controlfile/current.256.688686291".
  ORA-17503: ksfdopn:2 could not open the file +ORCL_FLASH_RECOVERY/orcl/controlfile/current.256.688686291
  ORA-15001: diskgroup 'ORCL_FLASH_RECOVERY' does not exist or is not mounted
  ORA-15001: diskgroup 'ORCL_FLASH_RECOVERY' does not exist or is not mounted
  ORA - 205 marked during: ALTER DATABASE MOUNT...
  SUCCESS: diskgroup ORCL_DATA has been removed
  Wed Jul 10 14:36:03 2009
  NOTE: Process of FILIPE out due to lack of activity file ASM for 186 seconds
  Stop background RBAL process
  
  I get what the output of this file but when I do a list of oracleasm disks he found all four volumes and I can browse the DSO via asmcmd. Any ideas or suggestions?

  Your diskgroup 'ORCL_FLASH_RECOVERY' climb or not... (Please check to ASM)

  on Node2:
  $ export ORACLE_SID = + ASM2
  $ export ORACLE_HOME = 'Oracle chemin_installation for ASM.
  $ sqlplus / as sysdba

  SQL > select NAME, STATUS from v$ asm_diskgroup;

  If no editing, try... and check error

  SQL > alter diskgroup mount ORCL_FLASH_RECOVERY;

  If error, please post it... If it is ok, then start again ;) database

  $ export ORACLE_SID = DB2
  $ export ORACLE_HOME = 'Oracle chemin_installation for DB.
  $ sqlplus / as sysdba
  SQL > shutdown
  SQL > startup

  nothing else... If you drive support group (you can use "asmcmd" ASM access and check the control file)

  $ export ORACLE_SID = + ASM2
  $ export ORACLE_HOME = 'Oracle chemin_installation for ASM.
  $ $ORACLE_HOME/bin/asmcmd

  ASMCMD > cd controlfile/orcl/ORCL_FLASH_RECOVERY /.
  ASMCMD > ls

  ....

  Good luck

• The ORA-00200 control file could not be created in oracle under redhat linux

  with the creation of the database by using script under redhat linux I got following error. Anyone know not so please guide me.

  ORA-01501: CREATE DATABASE failed

  
  

  ORA-00200: control file could not be created

  
  

  ORA-00202: control file: ' / home/core/Databases/ControlFile/ctl2.dat'

  
  

  ORA-27040: create file error, cannot create the file

  
  

  Linux-x86_64 error: 2: no such file or directory

  Please check if the directories are present or not.

  CD/home/core/databases / ControlFile.

  If the directories are present, check for the permissions on the mountpoint.

  LS - ltr/home/core/Databases

  LS - ltr/home/core/Databases/ControlFile

  The permissions should be user and group name through which you create the controlfile.

  I hope that this information is sufficient. If the problem solved with this brand then kindly as correct answer later for others

• problem in the control file created by file LKM to Oracle (SQLLDR)

  I have a fixed file ABC.txt and it has three fields/columns of length, C1: = 4, C2: = 10 & C3: = 6 & I use LKM to Oracle (SQLLDR) file to load data into the target oracle table.
  
  I received the following error message in step CALL SQLLDR at km
  "org.apache.bsf.BSFException: exception of Jython: Traceback (innermost last):
  File "< string >", line 3, in? »
  
  Then I checked the registry of file control and found that the start value position & final value was not defined in the control file that is created automatically by LKM
  "
  SQL * Loader-350: error of syntax on line 14.
  Expects an integer positive, found ': '.
  C1_C1 POSITION (:) '
  
  
  The control created by ODI file & the position value is missing.
  
  OPTIONS)
  SKIP = 0,
  ERRORS = 0,
  DIRECT = FALSE
  )
  DOWNLOAD THE DATA
  INFILE 'C:/SNAPON/EOL.txt '.
  BADFILE "C:/SNAPON/ABC.bad."
  DISCARDFILE 'C:/SNAPON/ABC.dsc '.
  DISCARDMAX 1
  IN THE TABLE SNAPON_W.C$ _0ABC
  (
  C1_C1 POSITION (:),
  C2_C2 POSITION (:),
  C3_C3 POSITION (:)
  )
  
  '
  Anyone know why the position value is not created in the control file.
  
  Published by: neeraj_singh on March 3, 2011 01:25

  Hi Neeraj,

  It happens because you have not selected the area of mapping as STAGUING running.

  Open your interface, click each column of your data target store, make sure that "run them One" is marked on the "transit Zone".

  Then run your interface.

  Thank you
  Fati

• Folder permissions in Windows 7 - a program that creates a file always has the authority to check the size of this file?

  Hello

  Where I work, we have a phone call, saving application that creates records of calls as .wav files.

  Before placing each record in long-term storage, the application creates a copy of the file (which is smaller) MP3 and then made a calculation of the free space to ensure that there is place in the long term for the newly created file storage.

  As part of the application must check the size of the MP3 file that he had just created and - I thought - calculation of space under Windows 7 that determination of the size of the file is sometimes a failure.

  (I think I understand, is that a .net function allows to determine the size of the file.)

  My query...

  If an application has sufficient privileges to create a file in a folder on the drive C: of the PC default also always have the right to determine the size of this file?

  Or are these two completely separate rights?

  For example, is it possible to have with no other rights granted write access?

  Thank you very much.

  The order of the questions, you asked:

  Yes

  Yes

  NO.

  It is indeed possible to give the file 'write' - access to the account, but not 'read' - access. However, even in this case the account can determine the size of the file.

  Log in under the account you are using for the conversion allows you to confirm my answers. To see the size of a file, use Windows Explorer or the Console command "dir".

• How knowledge/check if the RMAN backup was performed using a current control file or database catalog?

  Hello

  How knowledge/check if the RMAN backup was performed using a current control file or database catalog? I mean RMAN prompt or sqlplus is it possible to know.

  Thank you

  You're welcome my friend

  You can see them using two methods.

  as I mentioned above, you can see them connect to the catalog database and you can query using the view that I sent

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV89601

  the other method is the list command, you must use the list command after connecting using rman "rman target / catalog cat_user/cat_pass@catdbtns" command

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV8136

  Check the value of the control_file_record_keep_time parameter. The default value is 7 days. in the output of the list command, if you can see the old backups to the value, you must be sure that the backup information comes from the catalogue database

  SELECT * FROM parameter $ v where name = 'control_file_record_keep_time '.

  an example of command list

  the list of completed database before backup ' sysdate-10'.

  Concerning

• Creating a control file

  I have a question about the creation of a control file. If I want to create another control file, do I need to put values/paths of the control file in the CREATE CONTROLFILE statement?

  go in $ORACLE_HOME/dbs directory... you will find pfile/spfile.

• Problem to identify the control file when creating physical standby

  Hello
  
  (database version: 10.2.0.4)
  linux platform)
  
  I use the command below to create physical database from a backup before:
  

  rman target / auxiliary sys/tiger@paceview
  
  Recovery Manager: Release 10.2.0.4.0 - Production on Tue Sep 4 18:05:53 2012
  
  Copyright (c) 1982, 2007, Oracle.  All rights reserved.
  
  connected to target database: PACEVIEW (DBID=2092349485)
  connected to auxiliary database: PACEVIEW (not mounted)
  
   run {
   allocate auxiliary channel c1 device type DISK;
   set until sequence 38;
   duplicate target database for standby dorecover nofilenamecheck;
   }
  
  
  released channel: ORA_DISK_1
  allocated channel: c1
  channel c1: sid=35 devtype=DISK
  
  allocated channel: c2
  channel c2: sid=36 devtype=DISK
  
  executing command: SET until clause
  
  Starting Duplicate Db at 04-SEP-12
  
  contents of Memory Script:
  {
     set until scn  138180211934;
     restore clone standby controlfile;
     sql clone 'alter database mount standby database';
  }
  executing Memory Script
  
  executing command: SET until clause
  
  Starting restore at 04-SEP-12
  
  channel c1: restoring control file
  ORA-19625: error identifying file /backup/rman/paceview/DEL1_standby.ctl
  ORA-27037: unable to obtain file status
  Linux-x86_64 Error: 2: No such file or directory
  Additional information: 3
  ORA-19600: input file is control file  (/backup/rman/paceview/DEL1_standby.ctl)
  ORA-19601: output file is control file  (/PGHProdDB/oradata/paceview/control1.ctl)
  failover to previous backup
  
  released channel: c1
  released channel: c2
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Duplicate Db command at 09/04/2012 18:01:44
  RMAN-03015: error occurred in stored script Memory Script
  RMAN-06026: some targets not found - aborting restore
  RMAN-06024: no backup or copy of the control file found to restore

  I already tried to cross but always give same error
  Thank you

  Hello;

  That's what I'd do:

  Primary backup (change in your directory as needed)

  RMAN RUN {
  allocate channel d1 type disk;
  backup format '/u01/backups/PRIMARY/df_t%t_s%s_p%p' database;
  sql 'alter system archive log current';
  backup format '/u01/backups/PRIMARY/al_t%t_s%s_p%p' archivelog all;
  backup current controlfile for standby format '/u01/backups/PRIMARY/sb_t%t_s%s_p%p';
  release channel d1;
  }
  

  Move the backup and duplicate like this:

  rman target sys/password@PRIMARY auxiliary /
  
  RMAN> run {
  allocate channel C1 device type disk;
  allocate auxiliary channel C2 device type disk;
  duplicate target database for standby nofilenamecheck;
  }
  

  For details of this method, see:

  http://www.Visi.com/~mseberg/duprman2.html

  Best regards

  mseberg

• Whwn to create a standby control file?

  Hi all
  
  I want to set up a database waiting for my Production DB.
  
  I have a doubt, can we create a watch by control file when the primary database is in place and the mode of running(read-write). or otherwise is a must in Mount State only?
  
  Please notify.
  
  Thank you.

  Dear IndianDBA,

  There is one important thing to remember before you create a standby controlfile. You must create the controlfile after the full database backup, which is taken with the Recovery Manager (RMAN).

  You can create standby controlfile is on the mount status or open state of the database in him giving an absolute path. I think that there should be no problem to create during the State opened the database.

  Kind regards.

  Ogan

• create a standby control file...

  Anyway I can create "* Eve *" control file to the standby server that has a different name "database"?
  
  I'm testing the dataguard configuration by installing oracle DB PRIM and STNDBY on the same server unixservers.
  
  Primary DBName = "PRIM".
  Standby server DBName = 'STAND '.
  
  When I create the standby control file and re - use to mount the database on the standby server that I get below error msg. Is there a way I can change the name of the database in the standby control file created by
  "alter database PRIM create standby controlfile as ' / u01/stndby.ctl ' (any other syntax?". for example TRACE... other option?)
  
  
  
  {code}
  ERROR on line 1:
  ORA-01103: name of the 'PRIM' database in the control file is not "STAY."
  {code}

  http://www.adp-GmbH.ch/ora/data_guard/create_physical_standby_db.html

• Create the new database of complete hot RMAN, atrchivelog and backup control files

  Hi all
  
  I'm trying to create the new database U1234 of P1234 of full hot RMAN, atrchivelog and control P1234 file backup.
  
  Here are my steps
  
  (1) to restore the control file
  
  #! / bin/sh
  ORACLE_SID = P1234
  export ORACLE_SID
  RMAN nocatalog target / < < EOF | Tee restorecontrol.out
  startup nomount pfile=/u01/oradba/admin/U1234/scripts/restore/restore071009U1234/initP1234.ora;
  the value of DBID 6767676;
  run
  {
  allocate channel d1 type disk;
  controfile catering to ' / u02/oradba/U1234/control/P1234_control01.ctl';
  Restore controlfile to ' / orarman/restore/P1234/cf_P1234_c-00';
  change the editing of the database;
  }
  EXPRESSIONS OF FOLKLORE
  
  (2) database stop then restart the database with the new contraol file using pfile.
  
  (3) restore data files
  
  #! / bin/sh
  ORACLE_SID = P1234
  export ORACLE_SID
  RMAN nocatalog target / < < EOF | Tee restore_dbfiles.out
  Run {}
  the value of newname for datafile 1 to ' / u05/oradba/U1234/dbfile/U1234_system01.dbf';
  the value of newname for datafile 2 to ' / u05/oradba/U1234/dbfile/U1234_undotbs01.dbf';
  the value of newname for datafile 3 to ' / u05/oradba/U1234/dbfile/U1234_sysaux01.dbf';
  the value of newname for datafile 4 to ' / u06/oradba/U1234/dbfile/U1234_users_d01.dbf';
  the value of newname for datafile 5 to ' / u06/oradba/U1234/dbfile/U1234_tools_d01.dbf';
  the value of newname for datafile 6 to ' / u08/oradba/U1234/dbfile/U1234_audt_x01.dbf';
  the value of newname for datafile 7 to ' / u07/oradba/U1234/dbfile/U1234_audt_d01.dbf';
  the value of newname for datafile 8 to ' / u07/oradba/U1234/dbfile/U1234_audt_d02.dbf';
  the value of newname for datafile 9 to ' / u08/oradba/U1234/dbfile/U1234_lh_x01.dbf';
  restore the database;
  switch datafile;
  }
  EXPRESSIONS OF FOLKLORE
  
  
  ORA-27063: number of bytes read or written is incorrect
  SVR4 error: 28: no space is available on the device
  
  Now, I missed the space during the restoration of data files and want to restore remaining who is 3 and 4 of datafile datafile.
  
  Can you please let me know how I can restore it.
  
  I need to change the names of database after the successful restoration.
  
  DBVERSION 10.2.0.1
  operating system: solaris 10
  
  Thanks in advance.

  Hello..

  Do you have free space? If Yes, then you can try: -.

  RUN {}
  SET NEWNAME for DATAFILE 3 to ' / u05/oradba/U1234/dbfile/U1234_sysaux01.dbf';
  RESTORE THE 3 DATA FILE;
  DATAFILE 3 SWITCH;
  }

  [http://www.oracle-base.com/articles/9i/DBNEWID.php]

  Anand