Similar Questions

• JS/CS4: Create references from XML-Data

  Hi scripters.

  My problem is the following:

  I am importing and scripts of a XML file in InDesign.

  Now I would like to Insert a reference (notes) in my text.

  The insertion point is after the element < endnotesign >, the endnotetext itself is located at the end of the document (and is also numbered).

  When manually editing the document I chose-> "Insert reference" and then bind it with 'paragraph' then I choose a special definition "endnotestyle", it contained all the paragraphs, I now link the first one and inserting 'paragraph number' (which comes from the numbering of the "endnotestyle"). I have to do after each < endnotesign > element

  Is there a way to automate this?

  I am a bit confused with the IndesignObjects in ESTK as there are references and hyperlinks that are mixed together in this content.

  Thank you in advance for your help!

  This is my first fragmentary essay:

  function processEndnotes() {}
  myIdName = "processEndnotes";
  This.XPath = "//endnotesign."
  This.Apply = function (myElement, myRuleProcessor) {}
  var myInsertionPoint = myElement.insertionPoints [0];
  mySource var = myDocument.hyperlinkTextSources.add (myInsertionPoint);

  How to set the destination in this case?

  var xRefForm = doc.crossReferenceFormats.item ("page nr.");
  
  source var = myDocument.crossReferenceSources.add (myInsertionPoint, xRefForm);
  myLink var = myDocument.hyperlinks.add (source, destination);
  myLink.visible = false;
  Returns true;
  }
  }

  Hey franziska.

  Here is an example of the way in which in script using cross references end notes:

  http://www.kahrel.plus.com/InDesign/dynamic_endnotes.html

  Peter

• Absent from the report data query

  is the SQL code for the query: SELECT AD_Pref_none_pref_Arch_Domain. [Organizational units (uses)], AD_Pref_none_pref_Arch_Domain.Name, Count (AD_Pref_none_pref_Arch_Domain. [Standard and Regulation_Category]) AS CountOfPref, AS Count (AD_Pref_none_pref_Arch_Domain.Name) CountOfPNP, [CountOfPref] / [CountofPNP] AS PercentPref, ([CountofPNP]-[CountOfPref]) / [CountofPNP] AS RatioPNP
  OF AD_Pref_none_pref_Arch_Domain
  GROUP OF AD_Pref_none_pref_Arch_Domain. [Organizational units (uses)] AD_Pref_none_pref_Arch_Domain.name, [CountOfPref] / [CountofPNP], ([CountofPNP]-[CountOfPref]) / [CountofPNP]
  HAVE (((AD_Pref_none_pref_Arch_Domain. [Organizational units (uses)]) like "E S SF" & "

  Q3Z get AD sum of Total P N P1

  E S SF	1.1 data management	0	11	0.00%	100.00%
  E S SF	1.1.4 staff Master Data Management	0	1	0.00%	100.00%
  E S SF	1.1.5 product Data Management	6	9	66.67%	33.33%

  and the show report

  R3Z get AD total P N p

  E S SF	1.1 data management			0.00%	100.00%
  E S SF	1.1.4 staff Master Data Management			0.00%	100.00%
  E S SF	1.1.5 product Data Management			66.67%	33.33%

  Now I don't know what else to do. I have already created several queries to if I can find the problem, that the data displayed on the query, but once I have create the query report data is missing only the count data. Thanks for your help anyone.

  Hello

  SQL is not supported in these forums. I suggest you ask again in the dedicated Microsoft here SQL instance:

  http://social.technet.microsoft.com/Forums/en-us/category/sqlserver .

  Thank you.    :)

• Do we need data warehouse, if we only create dashboards and reports in obiee?

  Hello! I'm new to obiee.

  My organization has decided to build their reports and dashboards using obiee. I am involved in this mission, but I don't have in-depth knowledge he obiee.  My question is what do we need to have the installation of the data warehouse? Or I just need to just install obiee by the creation of a repository, and then by creating a data source in publisher bi and then create dashboards or reports?

  I'm confused too please help me in this regard. Please share any document or link where I can easily understand these things. Thank you

  Please share any document or link where I can easily understand these things. Thank you

  OBIEE is a software to run without a good understanding of its complex concepts. I would really recommend attending a training course, or at least a book (for example this or this). There are MANY items of general blog on OBIEE, many of which are of poor quality and are all step-by-step guides on how to do a particular task, without explaining the overall situation.

  If you want to use OBIEE and to make it a success, you have learned to understand the basics.

  To answer your question directly:

  -BI Publisher is not the same thing as OBIEE. It is a component of it (but also autonomous available). OBIEE makes data accessible through 'Dashboards' which is made up of 'Analysis', written in the answers tool. Dashboards can also contain content BI Publisher if you want

  -OBIEE can report against the many sources of different data, one or more data warehouse and transactional. Most of the OBIEE implementations that perform well are based against dedicated DW, but is not a mandatory condition.

  -If reports against a DW real or not, when you build the repository OBIEE you build a "virtual" data warehouse, in other words, you dimensionally model all your business in one data set of logic diagrams in Star.

• To create an interactive report in the apex by selecting from multiple tables

  Hi, I am creating an interactive report by selecting from multiple tables.

  SELECT w.FIRST_NAME as name, w.SURNAME as name, i.ROAD Road, i.DATE_OF_INC as DATE_OF_INC, S.STATEMENT as a STATEMENT OF Declaration

  JOIN THE

  WITNESS w

  ON w.witness_id = s.FK1_WITNESS_ID

  JOIN THE

  Incident I have

  WE

  i.incident_no = w.FK1_INCIDENT_NO

  JOIN THE

  user_station ps

  ON ps.station_id = i.nearest_station_id

  JOIN THE

  the user in.

  WE

  in. STATION_ID = ps.station_id

  WHERE po.officer_id = 1

  by I continue to encounter this error "the report query requires a unique key to identify each row. The supplied key cannot be used for this query. Please change the report attributes to define a unique key column. "ORA-01445: cannot select ROWID from where sample, a join without key preserved table view '

  So I googled around and found that in the attibutres tables report, I need to change the "LINK" COLUMN so first, I changed "Link to custom target", but the report is so I changed it to "Exclude link Clolumn" again, the report didn't report and I STILL got a blank page with only the tabs.

  I wonder you can not create a report by selecting from multiple tables?

  If you can please I need your help.

  Thank you

  You can, but in this case, it might be easier to build your report tables that are joined Oracle views and then build your report out of the newly built sight...

  Or wrap a selection around your selection with joins, and then make the where clause on the external selection...

  Thank you

  Tony Miller
  Software LuvMuffin
  Ruckersville, WILL

• HI, I'm wanting the form tool allows you to create multiple copies of documents with customized in each information fields. From excel data. Is this possible?  Thank you, Charlotte

  Hello

  I am keen on the form tool allows you to create multiple copies of documents with customized in each information fields. From excel data. Is this possible?

  Thank you

  Charlotte

  This is called a fusion and mailing. There is a possibility of Embedment in some versions of Excel (via the Acrobat PDFMaker plugin), or it can be done using a script.

• Creating a store of data from local hard drive

  If I wanted to use the free space on the computer host ESXi as a data store, I need to partition the disk hard until I have install ESXi on it or I can do after?

  Default install ESXi uses your hard drive and converts it to a VMFS volume if you install it on local storage. If you plan to use the entire disk, just install ESXi with General settings you will have already created for you a data store.

• Export/import of data from report on Ecxel plate

  Hi all
  
  I have a report. Please can tell me how to import and export report data and dashboard in an excel sheet.
  
  Thanks in advance
  
  Published by: user8949151 on March 18, 2010 12:34 AM

  Hello
  Click on the dashboard change--> click on the properties of the report--> report links-> download--> Ok--> record

  you will get the download---> download button to Excel/data/Excel 2000 by clicking on one of them, it will download for excel file

  Thank you
  Angelique

• Copy paste functions question - use CTRL + C in the computer a. someone over the network from other data CTRL + V. use of the appearance of the computer A computer.

  Hello world

  I had a problem with the copy and paste functions in my corporate network environment.

  This must happen frequently and there associate with P & C data.

  Scenarios:

  User A is to copy data in his laptop using CTRL + C functions. and he did not make any problem with copy and paste functions.

  He is able to copy and paste without any problem.

  BUT. Someone from another computer (USER B) in same domain, use CTRL + V function to paste.

  When USER B use CTRL + V. He will receive the data that USER A previously copied.

  I'm curious to know how the data can go other the computer Clipboard?

  Hope someone can help me with that. :(

  Kind regards
  Suhail

  MSN

  I saw this on my own computer with customers.  Team Viewer or RDP was still running.  I copied my client stuck.  It is repeatable and I informed observer team (what I use) and they created a bug report.

• Local data store has disappeared from the data store window (necessary emergency aid)

  Dear team,

  I m facing a very strange problem, all of a sudden one of the local ESX datastore disappeared thereafter are full details we have encountered/noticed.

  A local data store disappeared from the data store window.able to see this data store to add storage Wizard, which allows us to format the same.

  * If we take a session putty from here we can see and browse this store of data without problem.

  * Virtual computers that are running on this data store work as well (all files are accessible / VM is accessible on the network)

  * Unable to take backup image do error "the object has already been deleted or was not completely created.

  * Not able to take a «cannot complete the copy file... network» clone »

  Getting from newspapers in vmkernel:

  (14 dec 17:11:39 localhost vmkernel: 0:01:55:28.677 cpu1:4097) ScsiDeviceIO: 747: command 0 x 28-the device 'mpx.vmhba1:C0:T1:L0' failed, the data of sense H:0 x D:0 x 2 P:0 x 0 0 valid: 0 x 4 0 44 x 0 x 0.

  (14 dec 17:11:39 localhost vmkernel: 0:01:55:28.677 cpu1:4097) ScsiDeviceToken: 293: Sync IO 0 x 28-the device 'mpx.vmhba1:C0:T1:L0' failed: error/o H:0 x D:0 x P:0 x 0 2 0 valid sense data: 0x4 0 44 x 0 x 0.

  (14 dec 17:11:39 localhost vmkernel: 0:01:55:28.677 cpu6:4110) capability3: 5354: Sync READ error ('. fbb.sf') (ioFlags: 8): i/o error

  Need your help urgently to solve the same.

  concerning

  Mr. VMware

  

  Dear all,

  We have enclosed a case at VMware, please find their findings on the same.

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  After the webex session, we just had, I discovered the root cause of the problem reported to an underlying problem on the block device (the logical drive, or a problem on the Board) presented to accommodate the data in question store successfully.

  In short, whenever we try to do raw reading from the disk (from sector 0), the same always fail when we reach the 30932992 bytes (31 MB) brand with an IO error (which is consistent, he is always on this region of the disc that read operations fail, no more, no less). This result can be seen, even if no partition is in the disk (using if = / dev/sdb instead of/dev/sdb1 with dd) and even after zeroing on all sectors (if dd \u003d/dev/zero of = / dev/sdb). Strangely, read operations work fine (as he writes zeros of random data) throughout the entire disk. Keep in mind that the tests I did with no VMware tools (I used almost only dd for these operations), which prohibits certainly a VMware problem (in fact, if you were to try to start the server with a Linux live CD and run the same tests that I did, you would see the same behavior).

  I know that there is no report of material of any bad behavior on the table, but data collected with our tests today completely invalid who. The next step is for you to take this to the server provider to check for problems on the table or discs, because they are there and they are the reason for the problem you reported initially.

  Please let me know if you have other questions about it.

  Thank you

  -

  David Meireles

  Technical Support Engineer

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Now we have blocked a case from the hardware vendor, to see what the next move will be.

  concerning

  Mr. VMware

• navigateToURL from XML data

  (Edited for clarity 13:16's)
  
  OK thanks to Greg, I have this with a redirect built in barchart:
  
  This is my simple histogram:
  
  < mx:BarChart = x "561" y = "198" id = "CapitalExpenditures" dataProvider = "{I}" width = "762" showDataTips = "True" fontSize = "12" height = "371" >
  < mx:verticalAxis >
  "< mx:CategoryAxis categoryField="@type "/ >
  < / mx:verticalAxis >
  < mx:series >
  "< displayName = 'Spending' xField="@balance mx:BarSeries ' fill = race "{sc1}" = "{s1}" labelFunction = "formatNumber.
  Click = "navigateToURL (new URLRequest (rptWebsite))" >
  < / mx:BarSeries >
  < / mx:series >
  < / mx:BarChart >
  
  It works very well, but rather than hard code the URL, I would like to get from XML data that are already loaded into the system and assigned to a XMLList "di". My XML file is structured as follows:
  
  <>projects
  "< prName work = hours of 'One-project' = '705.50' rptUrl = ' http://www.google.com" / > "
  "< prName work = hours of project 'B' = '370.00' rptUrl = ' http://www.yahoo.com" / > "
  < / project >
  
  What I want to do, use the URL of the XML file, under the name of rptUrl as the URL path in my re - direct.
  
  I tried to put everything in navigateToURL (new URLRequest (@rptUrl) "> in but could not compile.")
  
  My confusion is the place where to insert the value in the URL variable and precisely what syntax to use? I have to use e4X for example?
  
  I created this function to my redirection:
  
  public void goUrlTFP(event:MouseEvent):void
  {
  ' rptWebsite =' http://www.google.com "
  navigateToURL (new URLRequest (rptWebsite)) return
  }
  
  It compiles, but I get nothing in the variable.
  
  I'm using the wrong syntax? I have to do something other than a mouseEvent of my function? Should I trigger the function somewhere else to the click event? I have to browse the file and fill a XMLList or something?
  
  I tried rptWebsite=item.@rptUrl and rptWebsite=ceDs.@rptUrl, but those who could not compile
  
  M.

  M, without trying to sound like I'm raggine on you (yet), I'm curious to know how you go about detective your way through the API to come up with possible solutions. What is your thought process? I wonder if it wouldn't you get more if you provide some tips on how to use the API correctly. Teach you to fish instead of giving the fish (for setting the proverb a little).

  I certainly did not know the answer to your problem just a few minutes ago, but it's literally what it took me to find what I think can be an answer to your problem.

  You have defined your features such as:
  Click on a bar chart and have it redirect to a URL that does not exist in the dataProvider of the histogram.

  How can we get these data to URL? The first thing to check would be click events. We look at the possible events that can be shipped when clicking the chart element (BarSeries) or component BarChart himself. When you look at the 'click' for the two event I wasn't expecting much in the measure where this event carrying additional information that I might be able to use, it's just a simple click event. And if I did event.currentTarget, there is no property that directly gives me the data I'm looking. However, in the API, I see an event type itemClick ChartItemEvent (under events) for BarChart which seems promising.

  Then I look in the API to ChartItemEvent and note that there is a property "hitData" type HitData which seem also promising. Now I look at HitData in the API and see that there is a property "item. It's more likely that the element that is used to render the particular BarSeries I clicked on. So I think that I can easily get the related data on an itemClick event.

  I tried and it was of course the data that I expect. I can remember something painfully obvious and much simpler to obtain these data, but I think this thought process shows that with a little effort, you can get a few runs in the API that you will probably have your solution. I doubt there is anyone on this forum who knows everything there is to know about the API. Use the docs, they are your friend.

  BTW, what is the other language that you are more familiar with what you're talking about from time to time?

  TS

• How to create a vertical report

  I'm new to application Express. I am trying to create financial reports base use it (for example, income statement, balance sheet). As a general rule, these reports are organized vertically where quarterly financial data are displayed as a separate column. Can someone point me in the right direction on how to create these types of reports using the Application Express?
  
  I haven't played with the report model "vertical report, watch 1. When I used this disc was oriented vertically and not the default horizontal orientation, but records appeared in individual tables instead of a big table with several columns.
  
  Here is an example of the type of report, I am trying to create: http://finance.yahoo.com/q/is?s=ORCL
  
  Thanks in advance.

  Hi Jim,.

  You can do if you create a custom line template. I do not have your tables, so what follows is based on:

  SELECT ENAME, SAL, COMM FROM EMP ORDER BY 1
  

  1 - Go to the components shared, models
  2 - Click on create
  3 - Select the report
  4 - Select from scratch
  5 - Enter a name for the model, select any template class (for example, Custom 1) and select "Named column (model line).
  6. click on create

  Now, edit the model and use the following settings:

  Model of line 1

  <td align="right" style="width:200px;">#1#<br>#2#<br>#3#<br></td>
  

  Front of the lines

  <table>
  <tr>
  <td align="right">Name<br>Salary<br>Commission</td>
  

  After the lines

  </tr>
  </table>
  

  Pagination parameters can be copied from a report of your choice model

  Attach the new model to your report and run the page. The HTML before lines will be rendered first, and then for each 'line' in the report, a new TD cell is created with all the data of this 'line' (note that #1 #, 2 # and #3 # fact refers to columns 1, 2 and 3 - so, in this example, ENAME, SAL and COMM respectively) and, upon reaching the maximum number of lines by the report parameters the HTML after lines is added, thus completing the line.

  Obviously, you will have to add in your own style and change the above to suit your specific needs, but that should give you a starting point.

  Andy

• missing data series for port operation in

  Hello.

  My unit is transfer 51 asynchronous data bytes in frames (each image to 80ms) on six different channels (ch1, ch2, ch3, ch4 rate 19200 baud and other two ch5, ch6 baud rate 115200) and these data series of six diff is received by my system and it should be checked for any error byte... (as I'm new to labview I programmed a long vi) in which use visa read and process the received data. But now, my real problem starts... until some time that my system will be receive data without no loss but aftr some time (say 15 minutes approximately) data loss starts from the track being baud rate of 115 200 and later other channels begin to do the same... But my system is supposed to run for 4hours for a trial of endurance of a plane... If the data loss is very less in number its OK but 3 of 4 frames then starts missing... it's like losing 75% of data... I enclose a wink of my code... It's just for a single port (in a while loop) I took... Imagine I; did the same thing to rest the port in a single while loop... Please guide me where ive that has gone wrong, or is this something to with time delay... pls help me

  the thing is always my application system needs will grow more, so I have to rectify this himself in the beginning

  
  

• APEX 5 interactive report data column alignment

  Hello

  I want to vertically align a column of APEX 5 interactive report data to the top of the cell (currently using the universal theme). By default, if a cell in the column in the file contains several lines (for example via the packaging), the other cells in the same row are centered compared to this in terms of vertical alignment multiline cell. I guess this can be managed with a set column expression shaped HTML, but I was not able to do so far.

  More generally how can it be implemented for all interactive reports / classics in a given application?

  I searched the forum etc. for similar positions, but not found a solution.

  See you soon,.

  Alan

  a_rintoul wrote:

  I want to vertically align a column of APEX 5 interactive report data to the top of the cell (currently using the universal theme). By default, if a cell in the column in the file contains several lines (for example via the packaging), the other cells in the same row are centered compared to this in terms of vertical alignment multiline cell. I guess this can be managed with a set column expression shaped HTML, but I was not able to do so far.

  It requires CSS rather than HTML, specifically the vertical-align property on the report table cells. For a single report, add a static region ID in the report area and include this style sheet in CSS Inline property page:

  #static-region-id .a-IRR-table td {
    vertical-align: top;
  }
  

  Leave aside the #static-region-id selector to apply the rule to each SORTING on a page.

  More generally how can it be implemented for all interactive reports / classics in a given application?

  Creating Styles of theme using the theme roller is the privileged and supported way to customize the appearance of the applications that use the universal theme.

  • Go to a page of IR in your application.
  • Click the Thème Roller on the developer toolbar.
  • Expand the CSS custom section.
  • Add this style custom rule:

  /* Interactive report cells */
  .a-IRR-table td,
  /* Standard report template cells: add selectors as required for other report templates */
  .t-Report-report td.t-Report-cell {
    vertical-align: top;
  }
  

  • The page will automatically preview changes.
  • Click on record under and type a name for the style of custom theme.
  • Topic close Roller

• Update of a column of table from xml data

  Hello

  I have an obligation to update a particular table from xml data column. to do this, I wrote the code below but I am not able to insert. could you please a peek into that.

  create table emp3
  as
  select *From emp
  where 1=1;
  
  alter table emp3
  add (fax_response varchar2(50));
  
  /*create sequence EmailRecords_XMLFILE_SEQ
    minvalue 1
    maxvalue 999999999999999999999999999
    start with 1
    increment by 1
    nocache;*/
  
  /* create global temporary table EmailRecords_XMLFILE
    (
    ID NUMBER not null,
    xmlfile CLOB
    )
    on commit preserve rows;*/
  
  /* create global temporary table UPD_Email_Records_With_Xml
    (
    id NUMBER not null,
  
    response VARCHAR2(500)
  
    )
    on commit preserve rows; */
  
  
  

  the XML data is

  <FAX>
  <EMAILOG>
  <ID>7839</ID>
  <RESPONSE>FAX SENT</RESPONSE>
  </EMAILOG>
  <EMAILOG>
  <ID>7566</ID>
  <RESPONSE>FAX NOT SENT</RESPONSE>
  </EMAILOG>
  </FAX>
  
  
  

  CREATE OR REPLACE PROCEDURE proc_upd_email_records (
     loc_xml          IN       CLOB,
     p_err_code_out   OUT      NUMBER,
     p_err_mesg_out   OUT      VARCHAR2
  )
  IS
     loc_id   NUMBER;
  BEGIN
     loc_id := emailrecords_xmlfile_seq.NEXTVAL; --created sequence
  
  
  
     INSERT INTO emailrecords_xmlfile --created Global Temp table
                 (ID, xmlfile
                 )
          VALUES (loc_id, loc_xml
                 );
  
     COMMIT;
        insert into UPD_Email_Records_With_Xml --created Global Temp table
          (ID, RESPONSE)
          select x1.id,
  
                    x1.RESPONSE
            from EmailRecords_XMLFILE,
                 xmltable('/FAX/EMAILOGID' passing
                          xmltype.createxml(EmailRecords_XMLFILE.xmlfile)
                          columns header_no for ordinality,
                          id number path 'ID',
                          RESPONSE VARCHAR2(250) path 'RESPONSE'
  
                             ) x1
           where EmailRecords_XMLFILE.id = loc_id;
     COMMIT;
  
     UPDATE emp3 er
        SET er.fax_response = (SELECT response
                             FROM upd_email_records_with_xml pr
                            WHERE pr.ID = er.empno)
      WHERE er.empno IN (SELECT ID
                           FROM upd_email_records_with_xml);
  EXCEPTION
     WHEN NO_DATA_FOUND
     THEN
        raise_application_error
           (-20000,
            'Sorry ! The Xml File which is passed is empty. Please try with Valid Xml File. Thank you!!! '
           );
     WHEN OTHERS
     THEN
        p_err_code_out := 4;
        p_err_mesg_out := 'error in insertion=> ' || SQLERRM;
  END proc_upd_email_records;
  {code}{code}
  
  
  

  Someone suggest me a slightly easier way to insert data...

  Thank you...

  You're complicating things

  A simple MERGE statement will do.

  create or replace procedure (proc_upd_email_records)

  loc_xml in clob

  )

  is

  Start

  merge into e emp3

  a_l'_aide_de)

  Select id

  response

  from xmltable)

  "/ FAX/EMAILOG.

  by the way xmlparse (document loc_xml)

  the columns id number way "ID".

  , path of varchar2 (250) response 'RESPONSE '.

  )

  ) v

  on (e.empno = v.id)

  When matched then update

  Set e.fax_response = v.response

  ;

  end;

  /

  But there is no value added by using these temporary tables if you are not at least an intermediate XMLType column (storage preferably binary XML).

  -What is the input XML code?

  -What is the version of db?