Creating image of report as work demo

Similar Questions

• How to create a camera profile that works with a JPG image with my color chart to check inside? [was: color Checker chart.] Really need help]

  I got a color chart to check. It came not with any software whatsoever. I shoot my images in JPG format. I know it's not really ideal but I'm on a tight budget and don't have the money for a digital SLR cameras that shoot raw. Is there anyway that I can always create a camera profile that works with a JPG image with my color chart to check inside? My table also includes RGB values below each color. Maybe I can match each color in the photo these values manually? If so how is this done?

  Thank you

  Bryce

  I've never seen software that does what you ask for JPGs, only RAWs.  The main problem is that any profile or adjustment is calculated according a JPG of a particular chart photo would apply to the other JPG photos with the same white balance.

  Jpg does not use "camera profiles" anyway in Lightroom, the profile is always integrated.

  There is a product that allows to calculate the HSL cursor offset values given a JPG photo their own table owner who looked like a color checker, but had two lines reversed so the software could not be used with a standard-checker color, unfortunately.  Now their table has twice as many patches (48), and looking at it on their site I'm not too sure that it does not always work with JPGs or if she's just raw files, now.

  The graphic and software are called SpyderCheckr of Datacolor.  There are various software that do different things, but none are using a ColorChecker, so having one is mainly a loss until you get a camera that can take raw photos, so keep a humidity and temperature controlled environment as much as possible until you have the right camera.  You can probably use the grey patches to adjust exposure, but that's all.

  Today you need not a digital SLR to have raw photos, well.  My phone Galaxy S6 with the last update of Marshmallow and the software of camera update will take photos in format raw DNG in Pro mode which I can create custom profiles camera to use a ColorChecker, although the camera is really good in itself, so when I found everything first he could make DNG I took a little but now, I usually just use the camera to make the jpg unless the shot is really important and the lighting is not too hard.  I think that S7 phone's camera is even better.

  What kind of camera do you have?  Sometimes, there are firmware hacks that allow the camera to shoot raw format even if the standard camera cannot.

• Attributes of Image Interactive report apex 5.0...

  Hello

  I created an interactive report in apex 4.2.6. To customize the image, I added the HTML code in the report interactive HTML Page header

  < style type = "text/css" >

  .apexir_WORKSHEET_DATA td [headers = "IMAGE_CONTENT"]

  IMG {}

  height = "200";

  Width = "80";

  }

  < / style >

  Now the Apex version is upgraded to 5.0... The images in the report have become major... Why this code does not work in apex 5.0? Is it possible to limit the size of an image in the interactive reports page?

  Thank you

  Toddler

  Kiran Pawar says:

  As the interactive is rewritten from the ground-up in the new version 5.0 of the APEX, there is no class 'apexir_WORKSHEET_DATA' in IR in APEX 5.0, change your css to:

  You must also add "IMAGE_CONTENT" as a static ID in the image column, like APEX 5.0 uses internal ID in the ID attributes of the IR instead of alias columns table header cells.

  4.2, page-level CSS should be in CSS Inline (without tags style) property page, and not the Header HTMLpage.

• El Captain hangs at startup, recharging, creates a crash report and continues without crashing

  I feel a strange behaviour of my Mac. For about five days, every time that I turned it 'ON', it would break a few seconds after the connection and it would create a crash report, ask for permission to send it to Apple (I always sent him), and the iMAC will continue to work until I stopped him. The next day, he would do the same thing.

  Here is an example of crash report:

  Anonymous UUID:

  B5854D05-3436-12A8-2222-FA2F4B07A8A7

  Mar 8-Mar 14:59:56 2016

  Panic report *.

  panic (cpu 0 0xffffff80049f076b appellant): "soclose: NOFDREF"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.30.4/bsd/kern/uipc_ socket.c:1263.

  Backtrace (CPU 0), frame: return address

  0xffffff83ab66b970: 0xffffff80044df792

  0xffffff83ab66b9f0: 0xffffff80049f076b

  0xffffff83ab66ba40: 0xffffff8004a17664

  0xffffff83ab66ba60: 0xffffff7f87f0e36c

  0xffffff83ab66bb50: 0xffffff7f87f0aeed

  0xffffff83ab66bc80: 0xffffff800499600b

  0xffffff83ab66bcc0: 0xffffff80049f27bc

  0xffffff83ab66be30: 0xffffff80049cfcb6

  0xffffff83ab66be60: 0xffffff80049c9787

  0xffffff83ab66bf00: 0xffffff80049c95be

  0xffffff83ab66bf60: 0xffffff8004a2a731

  0xffffff83ab66bfb0: 0xffffff80045f0a36

  	Extensions of core in backtrace:
  	com Apple.NKE.applicationfirewall (163.0) [113F310F-1904-3F41-A206-1D275BF7A397] @0 xffffff7f87f09000-> 0xffffff7f87f10fff

  The process corresponding to the current thread BSD name: socketfilterfw

  Mac OS version:

  15 D 21

  Kernel version:

  15.3.0 Darwin kernel version: Thu Dec 10 18:40:58 PST 2015; root:XNU-3248.30.4~1/RELEASE_X86_64

  Kernel UUID: DECC9F02-27D7-31F0-9599-A9EF2873902C

  Slide kernel:

  0 x 0000000004200000

  Text of core base: 0xffffff8004400000

  Text __HIB base: 0xffffff8004300000

  Name of system model: iMac15, 1 (Mac-FA842E06C61E91C5)

  Availability of the system in nanoseconds: 83758637350

  last load kext to 17318211492: com.apple.driver.AppleBluetoothHIDKeyboard 181 (addr 0xffffff7f86b18000, size 16384)

  kexts responsible:

  com Parallels.virtualhid 1.0.3 3

  com Paragon - software.filesystems.ntfs 187.1.14

  com Parallels.Virtualsound 1.0.36 36

  com.apple.driver.AudioAUUC 1.70

  com Apple.filesystems.autofs 3.0

  com.apple.driver.ApplePlatformEnabler 2.6.0d0

  com.apple.driver.AGPM 110.20.22

  com.apple.driver.X86PlatformShim 1.0.0

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleMikeyDriver 272.51.3

  com.apple.driver.AppleHDAHardwareConfigDriver 272.51.3

  com.apple.driver.AppleHDA 272.51.3

  com.apple.driver.AppleGraphicsDevicePolicy 3.7.7

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.kext.AMDFramebuffer 1.4.0

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.iokit.IOBluetoothSerialManager 4.4.3f4

  com.apple.driver.AppleMuxControl 3.12.6

  com.apple.driver.AppleIntelHD5000Graphics 10.1.2

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.AMDRadeonX4000 1.4.0

  com.apple.driver.AppleBacklight 170.8.8

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.3f4

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.AppleSMCLMU 208

  com.apple.kext.AMD9000Controller 1.4.0

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.driver.AppleIntelFramebufferAzul 10.1.2

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleFIVRDriver 4.1.0

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.iokit.IOBluetoothUSBDFU 4.4.3f4

  com.apple.iokit.SCSITaskUserClient 3.7.7

  com.apple.driver.AppleUSBODD 3.7.1

  com.apple.driver.AppleUSBStorageCoexistentDriver 3.7.1

  com.apple.driver.CoreStorageFsck 517.20.1

  com.apple.driver.AppleFileSystemDriver 3.0.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.driver.AppleSDXC 1.7.0

  com.apple.iokit.AppleBCM5701Ethernet 10.1.12

  com.apple.driver.AirPort.Brcm4360 1020.17.1a1

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleBluetoothHIDKeyboard 181

  com.apple.driver.IOBluetoothHIDDriver 4.4.3f4

  com.apple.driver.AppleHIDKeyboard 181

  com Apple.kext.Triggers 1.0

  com.apple.driver.DspFuncLib 272.51.3

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.AppleGraphicsControl 3.12.6

  com.apple.iokit.IOSurface 108.0.1

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.driver.AppleSMBusPCI 1.0.14d1

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.3f4

  com.apple.iokit.IOBluetoothFamily 4.4.3f4

  com.apple.driver.CoreCaptureResponder 1

  com.apple.driver.AppleHDAController 272.51.3

  com.apple.iokit.IOHDAFamily 272.51.3

  com.apple.iokit.IOAudioFamily 204.3

  com.apple.vecLib.kext 1.2.0

  com.apple.kext.AMDSupport 1.4.0

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.AppleGraphicsDeviceControl 3.12.6

  com.apple.iokit.IOAcceleratorFamily2 205,1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleThunderboltEDMSink 4.1.1

  com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

  com.apple.iokit.IOBDStorageFamily 1.8

  com.apple.iokit.IODVDStorageFamily 1.8

  com.apple.iokit.IOCDStorageFamily 1.8

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOUSBMassStorageClass 4.0.2

  com.apple.iokit.IOUSBMassStorageDriver 1.0.0

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.driver.CoreStorage 517.20.1

  com.apple.driver.AppleUSBMergeNub 900.4.1

  com.apple.driver.AppleThunderboltDPInAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPOutAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  com.apple.driver.AppleXsanScheme 3

  com.apple.driver.AppleThunderboltNHI 4.0.4

  com.apple.iokit.IOThunderboltFamily 5.1.0

  com.apple.iokit.IOEthernetAVBController 1.0.3b3

  com.apple.iokit.IO80211Family 1110.26

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  com Apple.Driver.corecapture 1.0.4

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBXHCI 1.0.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417.2

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  Model: iMac15, 1, IM151.0207.B05 of BootROM, 4 processors, Intel Core i7 4 GHz, 32 GB, MSC 2.23f11

  Graphics card: AMD Radeon M295X, AMD Radeon M295X, PCIe, 4096 MB R9 R9

  Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0 x 0198, 0x393955353432382D3031382E4130304C4620

  Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0 x 0198, 0x393930353432382D3038372E4130304C4620

  Memory module: BANK 0/DIMM1, 8 GB, DDR3, 1600 MHz, 0 x 0198, 0x393955353432382D3031382E4130304C4620

  Memory module: BANK 1/DIMM1, 8 GB, DDR3, 1600 MHz, 0 x 0198, 0x393955353432382D3031382E4130304C4620

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 142), Broadcom BCM43xx 1.0 (7.21.94.136.1a1)

  Bluetooth: Version 4.4.3f4 16616, 3 services, 27 aircraft, 1 incoming serial ports

  Service network: Ethernet, Ethernet, en0

  Serial ATA Device: APPLE SSD SM1024F, 1 TB

  USB device: USB 3.0 Bus

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  USB device: FaceTime HD camera (built-in)

  USB drive: HP LaserJet 1200

  USB drive: Microsoft Wireless Optical mouse¬ae 1.00

  USB device: Apple USB SuperDrive

  Bus crush: iMac, Apple Inc., 26.1

  Apple never contacted me.

  I never installed the updates.

  I have disconnected the optical mouse and reconnects the Apple one, removed the superdrive and other non apple, with the exception of my HP printer USB devices. It is not yet...

  1. What is the best way to solve this kind of problem?

  2. What is the process to open a problem with the Apple Support, and is it necessary to pay Apple to investigate it?

  3 personal is that Apple answer questions here in this support group?

  4. is there an Apple's Support site, where they answer support questions that visitors can search for answers?

  Thanks for your advice.

  The panic is caused by a kernel bug. Please disable the firewall in the security & privacy preferences window and see if the panic stop.

• Ethernet/IP: ControlLogix bad reports class with Demo.vi

  Demo downloaded from...

  http://forums.NI.com/NI/board/message?board.ID=nilabs&message.ID=279#M279

  Which is pretty much exactly what I had tried on my cRIO (got the 'Type of Segment invalid' on the cRIO). So I've punted and ran the demo on my PC.

  Thus configured ControlLogix 1756-L55 (Firmware V16.03) by the demo...

  

  Yet as you can see Clx class bad reports. The demo affects indeed Instances of Assembly 100 and 101 via constants. There is nothing to configure. What Miss me?

  More information:

  1756 - ENBT is Rev 4.3.2 @ 192.168.1.2

  cRIO: 192.168.1.1

  PC:192.168.1.199

  Industrial communications FOR EtherNet/IP: V1.2.0 (MAX shows it installed on target cRIO)

  For future stabs in the dark...

  PC-wise:

  For some reason any. Remove the generic Ethernet Module, add to Controllogix project and re - download got to work.

  cRIO wise:

  My original config had a real (SGL), a FORCE (I32), and a (U8) SINT grouped in a cluster and then flattened in a 9 byte array. It was produced for ControlLogix on instance 100. A symmetrical body 101 has been consumed. When executed on the cRIO - the ControlLogix has pointed out an electronic inlay - incompatible error code produced. Not really useful (thank you Rockwell).

  So I disabled popup everywhere wherever I could - with no improvement.

  On a whim, I remove the SINT (U8) of the cluster, this changed the array of bytes length 8 bytes. I adjusted the constants of size in BT and deployed. I adjusted the side ControlLogix accordingly and downloaded. He started to work without problem?

  Go figure. Someone at OR can look at this because I can't imagine a reason why you need to limit a config to the sending of an even number of bytes.

• When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036

  Error image system original title: windows 7 0 x 81000036

  I'm doing a backup system image.  When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036.

  I have an ESATA connection on my Dell laptop I was trying to make the image on.  I use the unit every day to save files and which works very well.  He just leaves me CCADE with the system image backup...

  any ideas?

  Hello

  ·         You have created a system image backup before that?

  ·         You did it changes on your computer?

  ·         Is your esata formatted NTFS drive?

  Try to save the image of the boot system: http://support.microsoft.com/kb/929135

  Note: make sure that you start the computer in normal mode after a repair.

  See also the linkfor more information about the backup: http://windows.microsoft.com/en-US/windows7/Back-up-your-programs-system-settings-and-files

• First Pro CC gives an error "Could not create image buffer" and crashing after installing a videocard GeForce GTX 1070.

  Hi all

  I recently installed a GeForce GTX 1070 video card and drivers current in my bench mounted, very happy for the potential break in the rendering and playback (I was using previously a very old ASUS Radeon HD 7850). I had nothing else problems since.

  When I first tried a project of creation of opening, audio refused to play (speakers, headphones, everything...) I looked at the volume mixer while playing through the timeline and no audio only showed upward). Everything seemed fine. I closed, cleared the cache, opened the first, this time hold Alt while doing so to reset the preferences. Open very well, audio read back fine, that only now first was blocked indefinitely the generation of PEK files for a short audio clip in the project.

  After a long bit of troubleshooting in the speakers, I went ahead and did a complete uninstall of Premiere Pro and After Effects, then reinstalled both programs to their current versions (2015.4 and 2015.3, respectively). No more problems of generation PEK, but something much worse. Now, whenever I try to change the CUDA acceleration enabled, I can maybe five minutes absolute performance first until I get an error "Could not create image buffer", warning of notifications of Windows that your computer is low on memory, and finally, a complete crash where the screen goes black, flickers a couple times, then stays black for good with only the mouse cursor appears on the screen.

  The images that I'm editing is all images Go Pro, no effects applied. I am doing this for a client and need ready in a week, but the constant crashing makes them difficult to work around. I can more or less run by changing the acceleration of software only, display options but it is much slower and the memory is still eaten up like crazy (if I place the open Task Manager and start to scrub through the timeline I can watch the memory usage get up to 95% in 20 seconds approximately). Reading suffers as a result once the RAM is full until almost full.

  Technical specifications

  First Pro CC 2015.4 (latest version)

  OS: Windows 10 Pro (Version 1511)

  CPU: Intel Core i7 - 5820 K CPU @ 3.30 GHz

  RAM: 16 GB

  GPU: EVGA GTX 1070 (latest drivers)

  SSD (OS and Adobe Suite installed): SanDisk SSD internal 240 GB 2.5 inch SDSSDA - 240 G - G25

  Hard drive (where I put my multimedia files): WD Black 2 TB Performance Desktop Hard Drive: 3.5 inch, SATA 6 Gb/s, 7200 RPM, 64MB Cache

  Motherboard: ASRock X 99 Extreme4 LGA 2011-3 ATX Intel

  Film source - source footage is an hour of video of Go Pro, all arranged on the timeline, no effect applied (I'm just trying change the original film in a short video).

  Type: MPEG Movie (.mp4)

  Image size: 3840 x 2160

  Frame rate: 29.97

  Format of the pixels: 1.0

  It is worth noting that, with my old dusty Radeon GPU, I was able to edit these clips with ease. No reading, no problem of image buffer. I do not see my RAM never go above 60% usage, when I got this card is installed.

  Also worth noting, that the first, I have noticed absolutely no problems, and the video card itself seems to work very well. I can play MGSV at max settings with perfect reading, as well as other graphics intensive games.

  Any help?

  It's been almost a week and I had zero problems. First Pro CC 2015.2 works like a dream! I'll go ahead and mark this thread closed.

  For those just tuning, I was able to find a solution by uninstalling the Premiere Pro and After Effects, and then reinstall them back to last known stable on my bench (Premiere Pro 2015.2 and after 2015.2 effects). So far, running these versions has been very good, even with active CUDA acceleration.

  The only downside is that all the projects I've done in Premiere Pro version 2015.4 should be re-edited from scratch. But I've had absolutely zero problems using the program, which is a relief. Hope Adobe fixes this problem whenever 2015.5 is out!

• Create a virtual report machine include: Pool of resources with custom fields

  Hello

  I would like to create a VM report that includes the name of the virtual host computer and Discription, as well as the virtual machine Resource Pool belongs too.

  I would also report to query for custom fields, provide the names, values, and to give it in a format that works with export-csv.

  I have a start on the script and it included as an attachment.

  How should I go about adding custom fieldsvalues?

  How can I add the name of the Resource Pool of the report?

  Thank you in advanced for your help.

  Tim

  The problem with the CustomFields, is that I don't know how they are defined on a guest.

  It's a problem when you want to make an Export-Csv thereafter. The cmdlet can handle variable-length items in the table very well.

  That's why I put 1 CustomField in 1 rank.

  $report = @()
  Get-ResourcePool | %{
       $rpName = $_.Name
       $_ | Get-VM | %{
            $vmName = $_.Name
            $_.CustomFields | %{
                 $report += New-Object PSObject -Property @{
                      ResPool = $rpName
                      VM = $vmName
                      CustomName = $_.Key
                      CustomValue = $_.Value
                 }
            }
       }
  }
  $report | Export-Csv "C:\report.csv" -NoTypeInformation -UseCulture
  

  BTW, the Export-Csv cmdlet is a standard cmdlet. Has nothing to do with Dmitri.

  Note that the script in this format requires PowerShell v2 RTM

  ____________

  Blog: LucD notes

  Twitter: lucd22

• What settings to use in Photoshop to create images for 42 "LCD TV

  Hello world

  I hope you can help me please:

  I want to do a video advertising in store for a store selling at retail.  I use Adobe Photoshop to create images and create the movie using Windows Live Movie Maker.  The film runs on a 42 "Hannspree LCD TV.

  Here are some images of the TV, I need film on:

  

  

  

  Question

  Should what settings I use in Photoshop for this TV?

  For example, I choose file > New > Preset: Film and video > size:... .but what size?

  Is there a certain pixel size, aspect, resolution etc, I need to know to LCD TVs or design in general?

  Here's a picture where I need help:

  

  I noticed that Windows Live Movie Maker has an option of image format, such as:

  

  But I still want to know what settings to use in Photoshop.

  Sorry for the question long and if the solution is real obvious - I'm a newbie!

  Thanks in advance,

  bazraam

  Hi Bazraam

  This is the setting I would use. I normally would raise the resolution to 300 just in case I want to print the image, but if not 72 will work fine

  

• Yet cs4 creates image invalid disk (iso file)

  I have a video I change in first cs4, exported a .mpg file I import into encore to create a DVD. This works for the most part very well (I have to delete the .xmp file * before you import it into encore).

  Today, I edited the video, re-encoded the mpg file using quality 5 and 2 pass vbr and added a slideshow (6 photos) to the project yet. It relies as well on a disk (iso file) image. But when I try to burn the iso file using windows 7, he said that the iso image is not valid. I tried imgburn and got an error like this:

  session 1 track 1 MODE1... 2054

  DVD format: mode 1... 2048

  If I ask for imgburn to continue he then said something about CSS and encryption, which I do not, then I guess that the iso file is too messed up.

  I burned a DVD5 directly since again, and it works in a dvd player.

  No idea why this iso invalid occurs and if there is a workaround?

  Since cs4 is not the latest version, I suppose there is no hope to fix a bug?

  avpromedia, as a test, I would create a new project and try a simple test project, or the project there. I don't have a problem with the process you describe and suspect that this project is corrupted.

• Exchange image States do not work with the export in PDF format

  I designed a navigation bar for a Web site, I'm prototyping.

  I created "State 2" for each button in the navigation bar and apply style changes.

  I had slices of each button on the navigation bar.

  I selected the option 'Add an Image Swap behavior' choose 'to State 2"to display onMouseOver.

  I added information about 'Links' to each button on each page.

  I checked that the behaviors and links are in agreement on the 'master' throughout every page of the drawing.

  When I export to PDF format, the links work correctly, but 'Swap Image' behavior does not work. When I roll over a button, the style does not change when you view the document in Acrobat.

  PNG and PDF files are attached.

  Any suggestions?

  Thanks in advance!

  As you have correctly found, the links will work, but will not be seen no behavior added in Fireworks in PDF format when exporting.

  .. Dorin

• image capture does not work with the epson scanner after macOS sierra upgraded

  Image capture no longer works with epson scanner v800 after upgrade. I installed the new drivers from epson, and it still does not work. Just says: "waiting for scanner", but nothing ever happens.

  Drivers Epson macOS 10.12.x specific https://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=256062 & infoType = Do wnloads & platform = OSF_M_X12 do not work?

• IMAQ CREATE, image type setting

  Hello

  I'll put my f031b Pro Guppy camera pixel format.

  It seems too long I put attributes with property nodes: pixelformat as Mono 16, no matter what I put in the "IMAQ create"--->"image type", I still get output 16-bit gray scale.

  Is this correct?  What can control when I change the image type to "IMAQ Create"?

  best,

  Wen

  If the image is passed directly to the Image to get VI of IMAQdx, the type is unimportant since it is converted by the driver when it fills with data. Only the border size is relevant.

• HP Digital Imaging Monitor has stopped working.

  I get a message that HP Digital Imaging Monitor has stopped working when I boot.

  My printer is a Photosmart 8180 and all updates are installed.  My OS is Win7 x 64. with all the updates and I use NIS 2012 again with all updates.

  I then get a message let me allow windows to solve the problem and then close I have to, but the problem always comes back.

  where are these files located I can't find them anywhere to add exclusion. I keep losing the ability to wirelesslsy use it all in one printer. I can't find any rhyme or reason for him to quit. I scanned some photos in and go. I use a dell xps win 7 Home premium. HP Photosmart Premium C309g-m BT. It has been uninstalled and reinstalled, printer Dr. and all kinds other suggestions of HP forums. I have him granted full trust and he excluded from the analysis of the IPS. same ole.  It has not affected my laptop until yesterday, now suddenly too is upward. Any help is appreciated.

• Previous image button does not work

  Hello

  I'm a host of character and as an animator, I always watch movies frame by frame. I checkedenhancenments of Windows Media Player and I found a tool very useful. I can play frame by frame with the option, but only in a way forward. The previous image button does not work .

  Is this a bug?

  My system properties:

  • Intel Core i7 CPU 920 @ 6.67 GHz
  • 6 GB OF RAM
  • 64-bit operating system
  • Windows 7

  Waiting for your response.

  Albert

  Hello

  This is considered to be a design problem.

  Your feedback helps Microsoft make software and services the best they can be. Please leave your comments on the link below. To learn more, sign up for:

  https://connect.Microsoft.com/dashboard/Info/

  Leave your comments on the link below:

  http://mymfe.Microsoft.com/Windows%207/feedback.aspx?formid=195

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.