Creating new interface controller on 5508...

Similar Questions

• Creating a new interface on the Pix 516F

  I've created and activated a new interface (DMZ) on a 516F Pix. In the MDP a default outbound rule was automatically created for this interface. I could get out to the internet without any problem. However, I need to open some ports in the DMZ to the inside interface. When I add a new access rule, the outbound rule disappears and I can no longer to the internet. I tried to recreate a similar rule to allow all tcp traffic to the external interface of the demilitarized zone. The MDP has accepted the rule, but when I went back to look at it, the rule has been changed from the outside to the inside.

  How can I maintain the default outbound rule and always open ports inside?

  Thank you

  Nick

  In General:

  allow access to your internal network (web servers, printers, regardless.) (BE SPECIFIC!)

  deny all access to your internal network (deny ip no matter what subnet)

  allow an ip

• Intel (r) 82801 GB/GR (ICH7 Family) LPC Interface Controller - 27 b 8

  I need help! @ ! I miss a driver (Intel (r) 82801 GB/GR (ICH7 Family) LPC Interface Controller - 27 b 8)
  Stuurprogramma voor niet Geinstalleerd said expensive zijn. (Code 28) unknown devive
  Please and thank you
  natac
  running windows 7 before any trubbles on xp with unknown device

  Hello

  1 check with system Maker like this might be a known issue with your system.

  Start - type in the search box - find information system at head of list of the system - right click - Run as Admin

  Look for the Chipset 945 material resources or 965 as examples.

  Make a Restore Point:

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  You can try Intel downloads:

  Chipsets-click and then select your type of Chipset then specific model - it will ask Window - Download - Version
  SAVE - go where you put - it - right click Run as Admin - REBOOT

  http://Downloadcenter.Intel.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows Journal is not open previously created templates or create new ones with pilot writer Ledger

  I used the driver Journal editor to create templates of forms I fill out frequently or that I frequently have to annotate Office documents.

  Recently the newspaper stopped opening these templates and I'm also able to create new models. I can still write normal notes on the default 'paper' line. When you try to open previous models, the newspaper stops working and gives me a message to indicate that the program has stopped working and Windows will close the application, and let me know if a solution is found.

  I uninstalled the driver of editor of Journal and the touch interface and Windows Journal and re-installed everything new + fix the driver of the writer. Well, none of this has solved the problem.

  Other advice would be highly appreciated, since I have now come back to fill in forms by hand again once and then their scan to computer.

  Kind regards

  Gerhard.

  Gerhard,

  What exactly happens when you try to open previously created templates?

  You can create a new one and use it?

  chk this link.

  http://www.7tutorials.com/using-Windows-Journal-beyond-basics

• On the new Interfaces to terminate VPN

  Hello

  I have 2 Cisco ASA connected in 2 offices who have a fully functional l2l ipsec tunnel.  A new link layer 2 has been installed on each site and I'm her leading to a firewall FE int each site with a private address.  Connenctivity is established.  So I want to exchange the vpn to use external interfaces to the new installation interfaces

  On the two firewalls, I activated isakmp on the new interface

  I created a new group of tunnel on each side with the same pre action key (with the system configuration command: run more :-)))

  activated the card encryption 'my_map' on the new interfaces

  That's all I would need?

  I tested it by removing existing and using new peers peers and its not coming up and saying there is no match

  Something else I'm missing?

  Thank you

  Hello

  In addition to activate the cryptographic controls on the new interfaces, you should have the route highlighting the new interface to reach the VPN peer.

  Verify that you have connectivity to the VPN peer through new interfaces.

  Federico.

• Mapping and creating dynamic interface Odi

  Hi gurus,

  I received the new requirement on ODI. I don't know that it may be possible.

  Here is my requirement.

  I'll take 2 tables as follows.

  Table1. : do you have the details of source and target as - target Id, name of the source file, the name of the table

  ID sourcefilename targettable

  ---     ---------------------     -----------------

  1 epm.csv salestable

  currency.csv 2 regiontable

  Table2: details of column mappings as Id, sourcecolumn (from file), the column target (from table).

  ID sourccol trgtcol

  ---     ------------     ----------

  1 ename ename

  1 esal esal

  1 eid eid

  2 countries

  2 currency

  The package should be as executing package I provide (ID) parameter. ID-based it should choose the table of file name and target source from Table1 and get reversed in ODI, interface must be mapped to the end of the mppings of Table2.

  If one can achivable may give some clues please.

  Concerning

  PrakashV.

  PrakashVsalvation,

  It is quite doable with Java or Groovy and the ODI SDK.

  You can find some examples and the code used on the Oracle blogs:

  https://blogs.Oracle.com/warehousebuilder/entry/odi_11g_interface_builder_accelerator

  https://blogs.Oracle.com/dataintegration/entry/automating_odi_development_tasks_using

  Chantal Mangano also wrote this excellent blog and the code to read the business rules an Excel files and create interfaces: Creating of Interfaces of mapping in the ODIDW team Excel spreadsheets

  It should not be too complex for you to change it according to your needs.

  It will be useful.

  Best regards

  JeromeFr

• Error in the new interface consultation documents

  Hello

  I created a new type of document and I use script idoc for certain metadata are

  autofilled and can perform the download of the documents of the new interface, but when I see the documents

  I have an error: System error has occurred. Contact your site administrator.

  This problem occurs only in the new interface in the native interface can access the documents.

  Someone knows how to help?

  Thank you

  Hello

  Thank you all, I am now managing read documents

  After you change a type of metadata that were incorrect.

  Thank you

• Failed to create new virtual machines on ESXi4.1 due to the error of slot

  Hi people,
  I am unable to create new virtual machines more on ESXi4.1 host due to the error of the slot. Its shows error "number of devices virtual exceeeds the maximum controller. In a cluster, we have 3 host ESXi 4.1.
  Each ESXi is IBM 3850 M2 / x 3950 M2, CPU Cores 24 CPUsx2.665 GHz.Processor Intel Xeon x 7460 @ 2 .66GHz CPU Type

  Please find the attached screenshot. Any help will be much appreciated.

  Thank you
  vmguys

  See http://kb.vmware.com/kb/1016221

• Creating new document model

  Hello everyone

  I just started inDesign Scripting recently, I wanted to create a script that once signed will create a new document from a template.

  So far, I have the script you see here.

  When it is executed, it is supposed to retrieve a template from a file and present it as the new document.

  But instead of the model, with its grids, headers and feet 'imported' demand... I just get the text of the template.

  I pretty much crossed and each method etc. in the OMV, but of course miss me something.

  Would that the method of "place"? Or is the script needing a complete re write?

  create new document
  
  App.Documents.Add ();

  var newDoc = app.activeDocument;

  newDoc = app.activeDocument.place (File("M:/MyFolder/TemplateTest.indt"));)

  Thanks in advance all those who may have some advice on this

  InDesigner from Northern

  North:

  As in the user interface, you need to app. Open() a model, not Document.place () it.

• Recorded not reflecting is not in the new Interface Options of LKM

  I modified my LKM option to truncate my target table. When I create a new interface, the LKM is selected automatically, but the options selected are not what I had saved. How can I 'really' change my option so that whenever I create a new interface, I didn't pass the option truncate table a NO to a YES?
  
  Thank you
  Dinesh.

  Hi Dinesh,

  Just to confirm...

  If you have changed the default value in the tab 'options' window KM; This is not going to work.

  You must change this to IKM. Please go to your project---> knowledge Modules---> expand IKM SQL Append (by clicking on the icon "+")---> Double click on the option TRUNCATE it and set its value to YES.

  Thank you
  Fati

• No "Create new version" option in Itunes?

  I want to convert a video to a format compatible with my iPod, but the file > option 'Create new version' disappeared.  He just moved? Or y at - it another easy way to convert a video to be compatible with the iPod?

  According to say what else, for video, it's gone.

  If these are not iTunes Store purchases try brake hand.

• TB 31.5.0 Win 7 after the TAB key for the automatic update no longer creates new address line "write" (enter the done key) but I want the TAB key! Why this keep happening after

  TB 31.5.0 Win 7 after the TAB key for the automatic update no longer creates new address line "write" (enter the done key) but I want the TAB key! Why is - this seems to happen after each automatic update? Cant we get 'option' to use the TAB key to navigate through the lines of address "write"?

  TAB through the fields that exist. It is the function of the TAB.

  Otherwise you could never use TAB to go out in a field for example: subject. It would create an indefinate number of fields and are unable to function as a TAB key.

  TAB does not back to THE fields,
  New crests to THE fields or donkey typing/selection enter/return address, you can use the selection of mouse click.

• Need to remove the old account from creating new a new Internet service provider. TB31.

  New VAC .the see my old address 'Reply', forward, & "write". -Usually very inconvenient. -You should be able to remove the old according to that ISP no longer exists.

  Do you need to delete the emails too?

  If you delete your account

  • Go to Edition-> properties, then select the account. Then click Action account at the left bottom of the active window and delete your account.

  If you remove the only shipping address, then delete the SMTP Protocol

  • Go to Edition-> properties and select the Server (SMTP) "outgoing" > choose one you need to remove.

  By default, you can't remove them, if you want to remove the default value, and then create new SMTP and make default and remove the old SMTP

• broken check of email Sync feature on create new account

  broken check of email Sync feature on create new account on windows xp pro sp3 all updates were installed very old machine. Firefox is the latest version 30.0. I am trying to create a sync account to migrate my firefox profile (bookmarks, quick links, etc.) to my new windows 8.1 pro machine all installed updates. Firefox on windows 8.1 is 30.0.

  I also tried to check the Synchronization tab in the options. I know not who finally sent me an e-mail but said that the verification link is corrupted, I opened the link in a new tab to copy here: https://accounts.firefox.com/verify_email?uid=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx & code = FBI & service = sync

  any help greatly appreciated to get checked and my ultimate goal to make everything migated to my windows 8.1 pro machine.

  [personal data voluntarily obscured - please do not post this link - c]

  It may take some time before the end of the first synchronization.

  You can see these words: pages through the address bar:

  • Subject: sync-log
  • Subject: sync-progress
  • Subject: sync-tabs

• "file > create new version" missing in the latest update to iTunes

  I used to use the Menu command file > create new version to convert the movies so that they will play on my 1st gen iPad. (The fact that he made them smaller was an added bonus).

  This function seems to be missing or moved in the last update. In its place is a Spartan function convert . If you hold down the option key, you can select «Convert to AAC...» ' which is useful in its own way, but what I'm looking for.

  Does anyone have an idea where the conversion of film went?

  Apple dropped this feature in the last update, because they think classic iPod is obsolete. But you can use the Handbrake or Apple Compressor to do the same job and then mark the files using MetaX or MetaZ, works for my 8th generation iPod classic.