C55-b5200 satellite - cannot load BIOS

I recently returned my laptop to my daughter who has obtained for his newspaper in I can't boot to the bios it loads directly to the required password that she can't remember c55_b5200 can I do in addition to the use for the door stop...

A Toshiba Service Center can remove the BIOS password for you.

Tags: Toshiba

Similar Questions

  • The BIOS update does not work on the Satellite - cannot load PHLASHNT.sys

    "Cannot load the PHLASHNT.sys driver.
    It gives then a few silly respons to check if you have admin rights or not.
    Under windows, very nice everyone has admin right here, that the problem with this :-/

    Hello Clemens,

    PHLASHNT. SYS is flash Phoenix NT driver that is necessary if you're updating a Phoenix BIOS. However, you don't tell what Satellite phone model you update or what version of the BIOS update you are using (Windows or traditional). Please send additional information so that we can try to help you with your problem.

    Kind regards

  • C50 - C satellite - cannot load the OS or virus protection

    I just bought this model but I am only able to get a response from the keyboard when you connect. I am unable to load microsoft or virus protection as neithrr the numbers or letters save you.

    If I understand you right, your laptop can not load the operating system preinstalled that you got with your machine, right?
    It is not easy to say what the problem is here.
    Try to set the BIOS to default settings and what you can try is to reinstall the OS using HARD drive recovery facility.

    Do you know how to do this?

  • Mini L9W - B satellite - cannot update BIOS running Windows 10

    Click Mini L9W - B with Windows 10.
    Everything works fine, but I can't update the BIOS to 5.20, via the Service Station or for download on the Toshiba site.
    Process gets as up to now by clicking on Yes to UAC... then nothing.
    Any suggestion is appreciated.

    Thank you.

    I have the same problem, also with Win 10.

    Meanwhile, the keyboard no longer answers.

  • Satellite U300-11v: cannot update Bios - error code 5 - without administrator rights

    I have recently bought a laptop Satellite U300-11v and use Tempo of Toshiba alerts.

    He advised me to update Bios driver - I have downloaded on my desktop.
    When I try to run the program I get the following message - "cannot load the driver, C:\Users\Sue\Desktop\bios-2007 1023123728\PHLASHNT. SYS -"Please verify your account. If you have no privilege administrator please log in again.

    I checked and there is only one user on the laptop - Sue and I am also administrator.

    Please tell us what to do. Thank you very much

    Click with the right button of the mouse and choose Run as Administrator option. Can you please point out if this helps or not?

  • Satellite A200 - cannot load the keyboard and touchpad drivers

    Hello

    I have SATELLITE A200-10W, HOME PREMIUM installed with SP1. I use it more than a year. All of a sudden it happened that my laptop stop responding and then I rebooted.
    My touchpad and keyboard stop working, but I connect as a user of the window through KEYBOARD to the SCREEN.
    In Device Manager I CAUTION icon on the keyboard and inside, it says under DEVICE STATUS which

    Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (CODE 39). »

    i8042prt.sys and kbdclass.sys files are attached as a driver in detail.

    My keyboard works during BIOS and even when I boot with the CD bootable operating system WINPE, my keyboard is not working, even typing everything inside this environment, but not in the normal window.

    I tired restore my laptop
    LAST GOOD CONFIGURATION
    Apply unsigned drivers
    Safe MODE (does not work yet)

    Downloaded some software like driver detected etc, but... NO RESULTS.

    I don't want to go for WINDOW RECOVERY CD for OS to re - install
    I have a large number of parameters, I don't want to erase...

    IS THERE A SOLUTION FOR IT?

    My warranty ended already after one year

    pls help and answer...

    That s a great info. Thanks for the clarification!

    Good bye

  • Satellite A30: Error number (11122) cannot load the bitmap with recovery CD

    I have a Toshiba A30 I want to reformat with the recovery disk. I get that day then I get an error that reads:

    The error number (11122) cannot load the bitmap file. Height max = 100

    The hard drive has now been deleted and I can't sent this message to reformat.

    Can someone help me on this please.

    Hello

    Satellite A30 is quite old and I wonder what report you something like this after so long. I put t know exactly what is happening, but it will be interesting to know a few things:

    Have you noticed a similar problem before?
    Are you using the original disk or some copy?
    Is there a problem with the HARD drive?

    Please do a little bit more about these things.

  • Cannot load Windows 7 - Satellite C660 guard freezing

    Hello world.

    This is a biggy. I have a Toshiba AMD Vision Satellite C660 / C660D laptop without Windows installation disc. Last week, it has become very slow, the interface resembles that of the interface of safe mode, then finally, he became completely unresponsive, therefore, through F8 on start-up I selected the option to return to the factory settings (I have this option)

    The BACK screen appeared and started normal loading then who responded, then I rebooted only to see Windows starts for the first time and carry the load, before that I had to create a cd boot from my other laptop to reboot the system that I had lost the boot mngr.

    The last part of the installation process begins whereby a white Toshiba screen appears with a green progress bar which is responsible for some drivers (see attachment). There are 39 steps to this process and I remember before the computer should keep restart itself, but it keeps freezing after about two steps. I kept turning it off and eventually the locked system administrator accounts.

    Once more, I restarted the PC, but this time in safe mode, the operating system did in fact load in safe mode and I created a few new accounts with administrator privileges, however, I still cannot load all of the operating system because it keeps freezing during the last part of the process.

    I have very limited knowledge of loading operating systems, so any help would be greatly appreciated.

    Hello

    First of all, it was a big mistake NOT to create a recovery disk Toshiba.
    The recovery of HARD drive that you were able to start pressing F8, is only possible if the HARD drive is not defective.
    I think in your case I think that there is something wrong with the HARD drive because there was a Bishop of startup notification which means that this laptop can not find a boot manager to boot the system.

    I have no other idea about trying to reinstall the system using the Toshiba Recovery disk or another drive in Windows 7 (of course if you have one)
    If the recovery fails, you will need to investigate on how much material could be affected. I think in this case it of needed to start with HARD disk check.
    Possibly the HARD drive needs to be replaced. Of course it is possible that I m wrong part is affected, but at the first step you should check the new installation of the OS.

    A recovery disc can be ordered here:
    http://backupmedia.Toshiba.EU/landing.aspx

  • Satellite A300D-135 - BIOS - System Configuration data read error

    After starting a Satellite A300D-135 laptop computer, the following error message appears:


    3070M extended RAM passed
    512 KB of L2 Cache
    System BIOS with a shadow
    Video BIOS with a shadow
    ATAPI CD-ROM: TSSTcorp CDDVDW TS-L632H
    Fixed disk 0: TOSHIBA MK2546GSX
    Initialized the mouse
    ERROR
    System Configuration data read error

    Press to resume, installation

    After pressing F1 the machine starts Windows, very well, but the error message is quite irritating, while it comes with a loud BEEP

    I tried the following things so far (in that particular order):
    -Load BIOS default
    -Flashed the BIOS with the latest version of the BIOS (2.80) for this type of model
    -Reinstalled windows with HARD drive format

    All the these did not work.

    I saw the same message appearing on several places on the internet (on different laptops with a Phoenix BIOS in common), but so far I have not been able to find a working solution.

    It might me a hardware problem, but all devices (vga, soiund, lan, wifi, usb, hdd) seem to work perfectly under Windows, so this does not seem the question). Another solution that is mentioned in some forums, replace the battery. But because the phone keeps time correctly I don't think it's the case either.

    Any ideas?

    Kind regards
    GJ

    Hello

    The POST (power on self-test) BIOS checks and detects errors on the motherboard.
    I think it has something to do with the hardware on the motherboard problem.
    I doubt that you can solve this if update of the BIOS and the BIOS default settings didn't change that.

    What to say; I think that the technician of the ASP should run tests to check what's wrong or what cause this I think it is question of s mobo.

  • Error of USB host - peripheral controller is not working properly because Windows cannot load the drivers required for this device. (Code 31)

    Original title - USB - IF xHCI USB Host Controller

    This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    I have a permanent error on my computer and when I run the troubleshooter I get the above message.  It says Windows cannot load the driver.

    Hello

    USB devices remove all you can - restart the computer - is still there, the error? If it isn't
    It is related to one of the add-in devices that you removed. If she is still there, then, the question is
    either a device internal who can not remove or physically with the USB bus itself.
    If it was not there, add devices at a time until it is displayed - keep in mind that it is
    possible that there are two (or more) devices in conflict over the issue. Once you
    identified the check of the aircraft with the help of the manufacturer.

    1. to find the control panel - device - device - right-click on it - uninstall - Manager then
    Restart the computer to see if it clears.

    2. same place - double click on the device - driver tab - driver update - to see if that helps.

    3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
    online documentation and drivers, diagnostics and ask questions in their forums on all known
    questions. Update the Bios and chipset or other USB drivers.

    =====================================

    If necessary, we will use these additional troubleshooting methods:

    How to fix Code 31 errors
    http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htm

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • C0000218 {registry file failure} the regestry cannot load the hive (file)

    I have XP pro. on a Dell computer. Think that children may have picked up a few difficulties. When trying to boot into safe mode, I get "Stop: c0000218 {Registry file honor} the regestry cannot load the hive (file): \SystemRoot\System32\Config\Software or its log or replacing." It is damaged, missing, or not accessible in writing. »

    There is no disk that came with it, but I have anouther computer with the same windows. I tried to find a way to make a BOOT disk but cannot find a way. Is there a way to solve this problem with the windows disc?

    It's a pretty popular mistake these days and sometimes easy to get running, but you also want to figure out how it happened.  I always suspect Symantec/Norton products with this error, but we'll see.

    If you currently or have already had a whole isntalled Symantec/Norton products, what are the names and versions (if you know).

    Other variants are:

    STOP: c0000218 {Registry file failure}
    The registry cannot load the hive (file): \SystemRoot\System32\Config\SECURITY or its log or replacing. It is damaged, missing, or not accessible in writing.

    STOP: c0000218 {Registry file failure}
    The registry cannot load the hive (file): \SystemRoot\System32\Config\SOFTWARE or its log or replacing. It is damaged, missing, or not accessible in writing.

    STOP: c0000218 {Registry file failure}
    The registry cannot load the hive (file): \SystemRoot\System32\Config\SYSTEM or its log or replacing. It is damaged, missing, or not accessible in writing.

    I would start with a chkdsk/r since the recovery CD of Console you make (see below) and please answer a few questions...

    Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

    Please provide additional information on your system:

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    The afflicted system has a CD/DVD drive work?

    You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

    Fill in the blank: my system was working fine until this happened: _.

    If the system works, what do you think might have changed since the last time it did not work properly?

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

    This is not the same as recovery disks that may have come to a store to purchase the system.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    xp_rec_con. ISO

    Download the ISO from here:

    http://www.mediafire.com/?ueyyzfymmig

    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

    http://www.ImgBurn.com/

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

    A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

    In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

    Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

    Assuming your boot drive is C, run the following command:

    CHKDSK C: /r

    Let chkdsk finish to correct the problems, he could find.

    It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

    You must run chkdsk/r again until it finds no error to correct.

    Remove the CD, and then type "exit" to exit the RC and restart the computer.

    You have not to set the BIOS to boot the disk HARD since the CD won't be.

    Do, or do not. There is no test.

    I decided to implement the points for a new puppy instead of a pony!

  • How to fix my computer told me windows cannot load a system driver reviews being missing or damaged

    How to fix my computer told me windows cannot load a system driver reviews being missing or damaged

    Follow these steps to try to solve your problems of boot.

     

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • laptop cannot load due to damaged or missing drivers

    Hi all

    After installing the updates of Windows Vista on my Dell laptop and reboot, I get the error message that it cannot load because the missing drivers or damaged:

    \windows\system32\drivers\pciide.sys

    I tried all the options without success. Not everyone looks like they might try to start and then take back me to the error screen. He suggested to load my re install dvd and reboot, but of course, restarting it informs me of my missing drivers or damaged.

    I also just installed a new hard drive to replace my damaged, even if I doubt that these two things are related.

    Thanks in advance for any help!

    Hi all

    After installing the updates of Windows Vista on my Dell laptop and reboot, I get the error message that it cannot load because the missing drivers or damaged:

    \windows\system32\drivers\pciide.sys

    I tried all the options without success. Not everyone looks like they might try to start and then take back me to the error screen. He suggested to load my re install dvd and reboot, but of course, restarting it informs me of my missing drivers or damaged.

    I also just installed a new hard drive to replace my damaged, even if I doubt that these two things are related.

    Thanks in advance for any help!

    Follow these steps to try to solve your problems of boot.

     

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

    Above is Dell to reinstall Vista from the DVD on your computer.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows cannot load a file of the registry classes.

    Not sure if the events of thous are related or not.

    Windows cannot load a file of the registry classes.

    DETAIL - unknown error

    -
    -
     
      1542
      0
      2
      0
      0
      0 x 8000000000000000
     
      59778
     
     
      Application
      -PC
     
     

    -
      Unspecified error
     

     

    The description for event ID 0 in source ICCS is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

    If the event is on another computer, the display information had to be saved with the event.

    The following information has been included in the event:

    Service started

    Status of initialization of service objects.
    C:\Windows\system32\sppwinob.dll, msft:spp/windowsfunctionality/agent/7.0, 0 x 00000000, 0 x 00000000
    C:\Windows\system32\sppobjs.dll, msft:rm/algorithm/phone/1.0, 0 x 00000000, 0 x 00000000
    C:\Windows\system32\sppobjs.dll, msft:rm / 2005-pkey-algorithm, 0x00000000, 0x00000000
    C:\Windows\system32\sppobjs.dll, msft:spp/TaskScheduler/1.0, 0 x 00000000, 0 x 00000000
    C:\Windows\system32\sppobjs.dll, msft:spp/volume/services/kms/1.0, 0 x 00000000, 0 x 00000000
    C:\Windows\system32\sppobjs.dll, msft:spp/volume/services/kms/licenserenewal/1.0, 0 x 00000000, 0 x 00000000

    The Software Protection service made license status check.
    Application ID = 55 c 92734 d682 - 4 d 71-983e-d6ec3f16059f
    License status
    1: 5 - b65e - 01f5fc37-a99e - 45 c, 1 d762f3518ead, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
    2: 2e7d060d-4714-40f2-9896-1e4f15b612ad, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
    3: 3b965dfc - 31 d 9-4903-886f-873a0382776c, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
    4: 586bc076-c93d-429a-afe5-a69fbc644e88, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
    5: 5e017a8a-f3f9-4167-b1bd-ba3e236a4d8f, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
    6: 5 - b889 - 2088b06738cb 5e35dc43 - 389b - 47, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
    7: 6a7d5d8a-92af-4e6a-af4b-8fddaec800e5, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
    8: 9ab82e0c-ffc9-4107-baa1-c65a8bd3ccc3, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
    9: 9f83d90f-a151-4665-ae69-30b3f63ec659, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
    10: a63275f4-530c-48a7-b0d3-4f00d688d151, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
    11: b8a4bb91-69b1-460d-93f8-40e0670af04a, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
    12: d2c04e90-c3dd-4260-b0f3-f845f5d27d64, 1, 1 [(0 [0 x 00000000, 1, 0], [(?)])] (?) (0 x 1 00000000 0 0 msft:rm/algorithm/bios/4.0 0 x 00000000 0) (?) (?) (?)]) (1) (2)]
    13: e68b141f-4dfa-4387-b3b7-e65c4889216e, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
    14: ee4e1629-bcdc-4b42-a68f-b92e135f78d7 1: 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
    15: 4a8149bb - 7 d 61-49f4-8822-82c7bf88d64b, 1, 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]
    16: afd5f68f-b70f-4000-a21d-28dbc8be8b07 1: 0 [(0 [0xC004F014, 0, 0], [(?)])] (?) (?) (?) (?) (?)]) (1) (2)]

    I solved the problem by creating the new profile by running driver difficulty in this regard.

  • all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not helping

    all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not help somehow

    One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

    You can try to reset (power off / on) of the router.

Maybe you are looking for