Creating Windows DVD section at 8 seconds long video

Similar Questions

• Creating Windows DVD - burning is not the whole video

  Hello

  Hoping someone may be able to provide me with assistance.

  I added successfully 4 VTS_01 film of video files in a project using create DVD Windows, using windows Vista. I entered all the information and personalized menu to suit me. I then run the preview everything seems very well the film will play form beginning to end.

  Now hear is my problem.

  When I burn the project to a disk, it will go through the movements of code and finally burn to the disc. Once it is finished burning, the disc is ejected.

  I'm going to play in my DVD Player menus I have made show the 4 files ok and I play the movie. But he will play only the first 28 minutes of the film. I tried selecting other scenes that won't play in the menu of the scene and yet it just starts at the beginning and only run 28 minuets and start over.

  I tried to use the DVD + RW 4.7 GB and DVD-R DL 8.5 GB think my film can now be too big once I added the menu, that's why I tried the 8.5 GB. The film was initially recorded on the DVD + RW 4.7 GB until I ran across Windows DVD Maker. The original plays very well.

  There are no problems with the discs, burner or DVD play as I have tried several, also tested incentive.

  Is there something I'm not directly in the program? Believe if the files are not compatible at all why would be him coming up in Windows DVD Maker and I would like to twick the menu and burn?

  Hoping someone can help as my film is really great on the preview.

  Kind regards

  A

  You say you converted. WMP... I'm guessing that you
  has meant. WMV?

  The duration of 88 minutes should not be too long for a
  DVD, but the project may be too complex for your
  system resources. As a general rule, small projects
  have a better success rate.

  Did you add additional files to this project? MP3
  for example music files?

  What version of Movie Maker are you running?
  Vista Movie Maker 6 or Windows Live Movie Maker?

  If it is Vista Movie Maker 6... try disabling the filters
  Movie Maker... it can have some effect on DVD Maker.
  Reach... Tools / Options / Compatibility tab and turn off
  all filters / OK.

  If you continue to have problems with burning your video
  DVD... the following freeware can be worth a try.

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD-flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in most
  free-standing DVD players... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  To allow a longer time on the DVD... left click the
  The project settings button / select video / open the target
  Bitrate of drop window. Choose a will more small number
  result in a longer time on the DVD. Press on... Accept.

  The vertical bar to the left of the screen will tell you
  How much compression you need.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  software advanced as Sony, Cyberlink, Nero, Roxio,
  Adobe, Ulead, etc... but at least it is a start.

  Good luck.

• Cannot create Windows DVD, burning the disc - Satellite L350

  Can someone help I'm on a Toshiba satellite L350
  I'm trying to burn a DVD with Windows DVD maker. It is the fourth I've done and the previous ones were all OK.

  I can't burn the DVD, I tried both types of disc and made about 10 attempts today.
  When I try to burn it starts OK then I get about 34% and get an error message

  I had two different error messages, it says "cannot create the DVD error unspecified.". "
  The other says "cannot create DVD catastrophic failure"

  As Akuma wrote, it can be a problem creating Windows DVD and has nothing to do with the functionality of optical disc drive. It is good to check the updates.

  Can you test the WEIRD feature using a different burning application?

• Creating Windows DVD won't finish burning

  From: pafos

  Problem - DVD burned with Windows DVD maker not fianalize Amend will be will not play back on normal household players

  After spending a considerable amount of time and money (on blank media) trying to produce a DVD that will play on my Panasonic player normal, that I gave up. If you Google this problem there are a lot of people out there with the same problem then why not can it be 'fixed' once and for all by SM.

  I tried to burn a slideshow of photo from Windows Live Photo Gallery, but she is spit out the disc at the end of 98.8%. R DVD plays perfectly on the PC but not the standalone player.

  I even tried to change the types of burners and media, but they all gave the same problem. The disc is not finalized.

  I can burn the DVD with the third-party software and these play fine, even, if I use XP pro, all is well so it's down to Vista I'm afraid. I have the latest version of Vista sp1 and all the drivers etc are up to date.

  In view of the foregoing can recommend a decent software that will burn DVD properly with Vista AND produce photo jpeg slide shows?

  Thanks in advance for any help

  Peter

  De : John Inzer

  (scroll down for some links that may help you with Windows DVD Maker)

  You can use Movie Maker or PhotoStory 3 to create slideshows.

  Photo Story 3 For Windows http://tinyurl.com/4f869 or...

  http://www.Microsoft.com/windowsxp/using/digitalphotography/Photostory/default.mspx (this is an XP application but many users report success works on Vista)

  The following freeware can be your solution to create video DVDs.

  DVD Flick

  http://www.dvdflick.NET/

  Be sure to read the Guide:

  http://www.dvdflick.NET/Guide.php

  If you have problems to download DVD Flick... try the following direct link:

  http://tinyurl.com/3wcglh

  or...

  http://voxel.dl.sourceforge.net/sourceforge/dvdflick/dvdflick_setup_1.3.0.2.exe

  Save the file to a folder on your hard drive and install from there.

  Tutorials:

  Tutorial DVD Flick

  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC

  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  Windows DVD Maker:

  Windows Vista-

  Help and how: creating Windows DVD

  http://tinyurl.com/yusbhl

  or...

  http://windowshelp.Microsoft.com/Windows/en-us/search.aspx?=&qu=DVD+Maker

  Windows Vista-

  Windows DVD Maker: Burn a DVD-video disc

  http://tinyurl.com/38qgzd

  or...

  http://windowshelp.Microsoft.com/Windows/en-us/help/27a0225d-260e-4313-8a82-7c5253e93e6f1033.mspx

  Windows Vista - Burn photos and movies on a DVD-video disc using Windows DVD creation

  http://tinyurl.com/3xtcfs

  or...

  http://windowshelp.Microsoft.com/Windows/en-us/help/5633ddcd-46a8-4d8e-82E1-2506401a60261033.mspx

  John Inzer MS - MVP

  Digital media experience

  View

  This isn't a technical support

  I'm a volunteer

  Solutions that work for

  me I work for you

  Proceed at your own risk

  Another response of the community of Windows Vista discussion groups

• Creating Windows DVD gives me an error; not a supported file type, a TI could not be imported. It is a film of saved project. How should I do?

  Creating Windows DVD gives me an error; not a supported file type, a TI could not be imported.  It is a film of saved project. How should I do?

  Hi jsims313,

   

  Welcome to Microsoft Answers Forums.

  We would like to get more information about you to help solve your problem. You better, please answer the following questions.

  ·         What is the format of the movie saved project file?

  ·         When you get this error message?

  To publish and burn a movie to a DVD, you must have Windows DVD Maker, which is included in Windows Vista Ultimate and Windows Vista Home Premium. You also need a DVD burner.

  1. Insert a DVD recordable or rewritable Virgin into your DVD burner.
  2. Open a project in Windows Movie Maker.
  3. Click file, and then click Publish Movie.
  4. Click DVD, and then click Next. Creation of DVD Windows opens.
  5. All the steps to create a DVD using Windows DVD creation.

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Program for creating Windows DVD cannot burn DVDs

  Program for creating Windows DVD cannot burn DVD due to can not find the DVD burner, free DVD burner disc see on the upper right. But my DVD drive with well with another burning program.

  Hello

  (1) have you made changes before the start of this issue?

  (2) you have the external devices connected to the computer?

  (3) what is the exact full error message?

  (4) is specific to the program the issue?

  Method 1: Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Resolution of the problems with creating a DVD-video using Windows DVD creation

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  For reference:

  DVD-video burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/DVD-Video-burning-frequently-asked-questions

  I hope this helps.

• Help with creating Windows DVD longer is set to 16:9 but burn with 4:3

  Hello, I have a problem with the windows dvd marker. I burned two DVD until now and they all have two aspect ratio of 4:3 i have changed to 16:9 in the menu options, but each time its only 4:3. I tried to look on google how to fix this and I discovered that passing the AVI to WMV file type will be slove the problem. so my question is would this cause really work that I don't have much time to waste because the creation of dvd takes a long time to burn the dvd and I don't want to end up with 4:3, this time? so, if some can help me that would be very nice.

  Hi Akshaypatel,

  I suggest you follow the advice given by Mouneshwar R from the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/problems-burning-a-DVD/08ed2466-d74c-4719-9fdb-54dcc8607e80

• Problem creating Windows DVD? Or Windows Movie Maker problem?

  Hello!  I created a slide show in Windows Movie Maker, which plays on my computer without problem.  Now, I try to burn it to a DVD by using the Windows DVD authoring application.  I was able to burn my DVDs sucessfully using the wizard and when I put it in the DVD player I get the main menu I created.

  I press play and start my video, but he plays 16 seconds and everything goes black.  Time continues to roll until the full 3 minutes are up, but I have 16 seconds of my film.  I burned 3 DVD and it did the same thing.

  Can someone help me with what I'm doing wrong?

  Hi Khsb14,

  Have a. you been able to watch the video before burning?

  B. did burn the DVD?

  C. is the DVD burner connected properly

  D. is the audio work after the 16^th s?

  E. do you have a mistake when he went to the black screen?

  This could be a problem with the burner DVD or the method of engraving. Try the following methods.

  Method 1

  Previewing your DVD, you can view the photos and videos on this subject. Check if the full video is seen in the preview. This can help you determine if you want to make changes to the DVD before burning the disc.

  1. In the ready to burn DVD page, click Preview.
  2. To read the DVD preview, click play in the control screen.
  3. To control the playback, click Pause , play , previous chapter or next chapter , according to what you want to do.
  4. To display the DVD menu, click Menu. Click on the top, bottom, right, or arrows left to go in this direction on the DVD menu preview, and then click the Enter button to play the selected menu item. Click OK when you are done previewing the DVD.

  Check the link for more information.

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

  Method 3

  Choose a speed slower burn to your DVD recorder as follows:

  • 1. Return to the Add pictures and video to the DVD page and then click on Options.
    2. In the DVD burning speed box, select medium or slow.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-an-audio-or-video-file-frequently-asked-questions

  I hope this helps.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot create Windows DVD - create DVD

  I make this all on a Windows 7 64 bit. The DVD burner is turned on, work, etc. I have 251 GB of free space. The problem is that this error message is so worthless, that is no real details as 'out of space', 'codec error', 'invalid input file', ' Hey, I don't like you "... There is nothing to work with. The entrance is an AVI movie that plays fine in Windows media center. The point "just die for no apparent reason" seems to be 38% in Windows Media Center and 17% in Windows DVD Maker and the blank disc is hunted. If no other Microsoft must build a correction which exports at least some useful error messages on the process of failure so there is a direction to take. At least in DVD maker status has been "Coding" and he dies in this. Windows Media Center you said nothing, but the error wave.

  Oh, Yes, I tried again after a fresh reboot and spin anything else. The same problem.

  I make this all on a Windows 7 64 bit. The DVD burner is turned on, work, etc. I have 251 GB of free space. The problem is that this error message is so worthless, that is no real details as 'out of space', 'codec error', 'invalid input file', ' Hey, I don't like you "... There is nothing to work with. The entrance is an AVI movie that plays fine in Windows media center. The point "just die for no apparent reason" seems to be 38% in Windows Media Center and 17% in Windows DVD Maker and the blank disc is hunted. If no other Microsoft must build a correction which exports at least some useful error messages on the process of failure so there is a direction to take. At least in DVD maker status has been "Coding" and he dies in this. Windows Media Center you said nothing, but the error wave.

  Oh, Yes, I tried again after a fresh reboot and spin anything else. The same problem.

  =====================================
  I suspect a problem of compatibility with the .avi file.

  Convert the .wmv format before importing the .avi file
  in DVD Maker may be worth a try:

  The following freeware can be worth a try for the conversion:

  SUPER © Simplified
  Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  After installing the program GREAT... open...
  you will see two small circles at the top left
  corner of the screen... check the UPPER circle.

  You can experiment with the settings
  but the following steps should help you get started...

  Drag and drop your. AVI files/s in the current field.

  Output container... Choose... WMV

  Video scale size / no change

  Left, click the Encode button.

  Choice: A Simple Profile / OK...

  Wait... wait longer...

  (FWIW... I have better luck with video if I'm not
  try to multi-task while a file is being converted)

  When the file/s are converted... you should find the
  in... Program Files / eRightSoft / Super / exit.

  Or... you can type... CTRL + O.. o open the Save
  Window and choose a backup folder.

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Creating Windows DVD

  My creation of windows dvd worked well in the past, but recently it does not burn anything.  When I set up a project and get set to burn, then just gets stuck on the screen "DVD Creation, please wait... "and she says"preparing 0,0%. "  He never moves, no matter how long I let him think.  Anyone had this happen before?  I did the front DVD with the program (about 2 months ago) and have not changed anything since.  Now it freezes just up - ideas?

  Thank you!

  Hello bigginger,

  Click on the following article to get help from the CD/DVD in Windows Vista.

  KB Article ID: 929461 -CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  The article has a button automatic FIXIT which will automatically fix problems with the Windows Vista DVD and will try to correct them. I used it for the same problem you have and it fixed my problem with success.

  If please reply back and let us know if it helped to solve your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Creating Windows DVD - decoding problem?

  Hello.

  Recently, I tried to use Windows DVD Maker for the first time. Files added in the right menu and I could create a menu and listen to excerpts from the DVD. When I click on the button to burn, however, the DVD does that make to 1.7% full and watch then say error message:
  "One or more files that have been added in DVD Maker may not be decoded properly. Make sure you have decoding software installed on your computer that can decode the different files and then try again. »
  Windows Vista Home Premium is supposed to come with software decoding (I think), and I can't seem to find a way to solve the problem. Maybe I need new software decoding? I don't know if I'm just on the obvious or not.

  Any help would be appreciated. Thanks in advance.

  Too bad. Thanks for all your help, but I solved the problem today.
  It turns out that this filmmaker of windows does support not either of the types of files that I used (.avi and .mov). They do not also support many other file types. He had to be a .wmv file format.
  I now use a new software to burn discs, because like that I don't meet problems in the future when you work with video from various sources.
  Two of the software I know who can solve the problem are Nero 9 and Adobe first Elements 7. (Just in case someone else runs into this same problem).

• Creating Windows dvd with the problem of the "invalid class string".

  When you try to burn a file to a dvd using windows dvd creation, I received a message 'tring class not valid' when burning, and the disc has been ejected. What does the message mean? How to fix?

  Hi KEVINQUACH,

  1. When you have the startup problem?

  2. you remember to make changes to the computer before this problem?

  3 - is this happen when you try to burn any type of particular file?

  You can check out the following link and try the steps suggested by Aziz N Support Engineer on December 2, 2009, and check if this may help.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/cannot-create-dvdinvalid-class-string/24d00965-F971-4982-A440-8bb01fc0db01

  Hope this information is useful.

• Windows DVD Maker encoding is no longer

  Lately, my creation of dvd windows refused to encode my videos. I can leave for hours only to return and see that 0,0% has been encoded. If I click on 'Cancel', the coding area will remain until I click "Cancel" again.  The main window of the DVD is not returned and I have to use the Task Manager to terminate the program.  What could be the problem?

  Hi aimjeezy

   

  Method 1:

  You can perform the scan SFC and audit-
  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

   

  Method 2:

  You can perform a clean boot and check if you are facing the same question in a clean boot state. To perform the clean boot follow step 1, mentioned in the article below, then try to install updates in this state of boot -

  http://support.Microsoft.com/kb/929135

  If the problem is resolved check which service non-Microsoft is the source of the problem; referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

   

  Refer to the below help links -.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions

   

  I hope this helps.

• Creating Windows DVD stops working

  I rely heavily on Microsoft DVD Maker, as I created it and burned more than 300 DVDs.  Only until sometime last week (29 March - 3 April) an automatic update from Microsoft has prompted the download and installation and is the SP2.  After downloading, it prompted a message before installing indicating "little of your programs will stop working."  He never said what program and I don't think criticism main programs closing, installation, I continued.  And, since my Windows DVD Maker is unusable.

  Yesterday, I restored my computer to standard manufactured.  During the installation of the Microsoft Vista operating system, without choice, I had to install with course Microsoft Updates, including service pack #2.  Needless to say that the problem still exists.  Apparently, Microsoft needs to release a patch for this problem as a result of its updates.

  I rely heavily on Microsoft DVD Maker, as I created it and burned more than 300 DVDs.  Only until sometime last week (29 March - 3 April) an automatic update from Microsoft has prompted the download and installation and is the SP2.  After downloading, it prompted a message before installing indicating "little of your programs will stop working."  He never said what program and I don't think criticism main programs closing, installation, I continued.  And, since my Windows DVD Maker is unusable.

  Yesterday, I restored my computer to standard manufactured.  During the installation of the Microsoft Vista operating system, without choice, I had to install with course Microsoft Updates, including service pack #2.  Needless to say that the problem still exists.  Apparently, Microsoft needs to release a patch for this problem as a result of its updates.

  =================================
  Just a guess really... but you might have a problem with
  your video driver...

  If you reduce the graphic hardware acceleration as
  According to the instructions in the following article... you can
  See an improvement.

  If... Yes, you need to update your video driver.
  (improvement or not... do not forget to return the)
  acceleration to full after the experience)

  * Proceed at your own risk *.

  How to put in back of graphics hardware acceleration
  http://www.pptfaq.com/FAQ00129.htm
  (scroll down to: "If you use Windows Vista")

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Creating Windows DVD on a Vista Business operating system?

  Is it possible to install Windows DVD Maker on a Vista Business operating system?  If Yes, where can I download Windows DVD Maker?

  Is it possible to install Windows DVD Maker on a Vista Business operating system?  If Yes, where can I download Windows DVD Maker?

  =======================================
  Windows DVD Maker is included in Vista Home Premium
  and ultimate... it is not available for download.

  If you want to create a video DVD, you need 3rd party DVD
  Creation software.

  The following preferential ticket may be worth a try:

  DVD Flick
  http://www.dvdflick.NET

  If you want to create a data DVD, you can try using Windows
  Media Player:

  Windows Vista-
  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.