Creation and Media Encoder CC encoding problem

Similar Questions

• CC 2015 shows the updates available for the creation and Media Encoder, but fails to download/install them.

  CC 2015 shows the updates available for the creation and Media Encoder, but fails to download/install them. Generated the log shows "ERROR: DS015: cannot read the target of the symbolic link to the file source (...)" at the end.

  What am I supposed to do?

  Thank you, Carlo Romano

  Finally, what worked for me was to completely uninstall and reinstall both apps until 2015 for CC.

  Thanks a lot for the quick reply anyway.

  Carlo

• Creation and Media encode freezes windows machine while starting up

  I'm not 100% sure when this started happening, but Premiere Pro and Media Encoder freeze my windows machine right I try to launch any of these applications.

  Here are my computer details

  The Razer Blade 14 laptop

  8 GB ram

  GeForce GTX870M with the version of the driver 368.39

  Windows 8.1

  Clues?

  Also, I tried to contact support directly and got sent in a loop. I would normally need direct support for this but I have nothing. Really hoping that the forum will help in answering my questions.

  I don't have this version of the driver for not paying a lot of attention, but I remember that there is some kind of problem with drivers 368

  You could try to go back to one of the versions of 365 corrector

• Problems with Premiere Pro CS6 and Media Encoder

  I have been using Media Encoder for months with Premiere Pro, but he has recently stopped working. It gets stuck trying to connect to the dynamic link and then fails.

  I tried to solve this problem for a while following the instructions online and I could have screwed up things. Is there a way to uninstall Premiere Pro and Media Encoder completely so I can reinstall them?

  I have a creative cloud subscription.

  First, select help > deactivate...

  Then just uninstall as usual.  After that, run the Script of cleaning of Adobe.  Restart and reinstall.

  https://www.Adobe.com/support/contact/cscleanertool.html

• Adobe Media Encoder problem suddenly made with CL open

  After update for first Pro CC 2015.1 - 9.1.0 (174) man and Media Encoder 2015.1 Build 9.1.0.163 I am facing a problem of rendering to H.264 format. I get the message "error compiling Movie - unknown error". However, when I spend "Mercury Playback Engine (OpenCL) GPU acceleration" to "Mercury Playback Engine software" only the same images makes it flawless. Of course, it takes about twice as long. Even abroad, the same images will make to ProRes using GPU acceleration. Here's my hardware features:

  iMac (retina 5K, 27 inches, end of 2014)

  Intel Core i7 4 GHz processor

  Memory 32 GB 1600 MHz DDR3

  Graphics card AMD Radeon R9 M295X 4096 MB

  OS X 10.10.4
  

  
  

  I tried rendering on another drive and the same failure occurs. I tried to export directly from Premiere Pro and the same thing happens.

  
  

  Any thoughts?

  
  

  Thank you

  Aviva

  
  

  
  

  Workaround solution discovered!

  I went through the clouds creative and found that I could turn the clock back to the latest version (December 2015) SOUL the previous SOUL CC 9.0.0.222 CC. (It's a bit buried in 'Previous Versions') Automatically downloading trashes newest version and install the other oldest.

  I threw the last first Pro CC - 2015.1 9.1.0 174 (Build). I chose the same piece of the timeline to compress with the same parameters of H.264 which had been at fault, he gives and launched SOUL 9.0.0.222 changed the rendering engine to the Mercury Playback Engine GPU acceleration, started the render and crossed my fingers. (I didn't hold my breath.) I was 39 minutes of video).

  And it worked!

  I had not changed anything else. I'll do some additional testing, but for now - because of the length to make it - I'm sure that this workaround is solid. The tricky part is to find the old version of SOUL on creative cloud.

  Aviva

• How to re-download the older versions first and Media Encoder?

  How to re-download the older versions first and Media Encoder?

  Hello

  Please see the link below:

  How to find and install a previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team

  
  

  Kind regards

  Sheena

• Premiere PRO and Media Encoder does not load

  My problems...

  Went to edit video in Sony Vegas today for the first time since the upgrade to Windows 10. Everything was going well until I tried to make the video and then it crashed. Spending 5 + hours on it until Sony told me to reset the settings by pressing ctrl-shift, as I double clicked. Then, it will not load.

  Is upset in Vegas and purchased Premiere PRO thinking it would work.

  During the installation of Premiere PRO, he said that I had to run a "limited access" to remedy. I ran the tool, but it crashed, so I ran it again and after a very long time 'does not' he said it fixed 0 problems.

  But the installer is more said that I needed it, so he must have done something.

  So I tried to throw the first, but it froze at the place where it says something like "Loading EncoderAvi.prm" and trying to load the Media Encoder, it does the same thing.

  I tried to restart the computer and try again. Now it is not yet come to that, the loading splash appears but nothing happens and he sits forever.

  Any ideas?

  Thank you

  Finally I thought of her. It's the AVI Codec. Specifically, it was Matrox VFW. I went to "Add & Remove Programs" and uninstalled Matrox and it fixed all the issues I had with Sony Vegas and Premiere PRO.

  I guess that Matrox does not work with Windows 10, or is not necessary. I think I've installed read Matrox video files a long time ago.

  Thanks for the suggestions. I'm really glad I avoided the nuclear option to format and reinstall. Would take weeks to get things back.

• Cannot open Adobe first Pro CC (2015) and Media Encoder CC (2015)

  Hello!

  I downloaded Adobe Creative cloud and downloaded the Media Encoder CC (2015).

  When I try to start the Media Encoder CC (2015) program freezes then it returns the error "the application could not initialize properly (0xc000001d). Click OK to close the application. ». The same thing happens with Adobe Premiere Pro.

  I don't think that it is a BIOS problem, because the pc is new :/ I bought it recently

  Here is the pc components:

  (1) case Podcastinacion bx1-4246 v2.1

  (2) 1150 - asus B85M-G

  (3) quad Core i7 4790 Haswell 3.6 - 1150

  (4) Ddr3 - 1600 8 GB Kingston

  (5) HD 1.0 Tb Sata3 - WD Blue 64 MB

  (6) GTX960 Ddr5 2 GB - SC Evga Geforce

  (7) Aerocool Strike-X 600W power supply

  (8) DVD R/RW Sata - Lg GH24NSB0

  I have version 2.7 of SMBIOS

  I don't know what to do :/

  It's a pc problem?

  Thank you very much!!!

  Eugenia salvation,

  Please visit: http://www.adobe.com/support/techdocs/331177.html

  I hope this helps.

  Concerning

  Megha Rawat

• How to fix Exit Code 21 when you install After Effects and Media Encoder?

  I ran Creative cloud cleanser because I kept getting 42% after having run completely downloaded but extraction failed, this is the log:

  < PRE > exit code: 21

  Please see specific errors below for troubleshooting. For example, ERROR: DW021...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 2 error (s)

  ERROR: DW021: payload DVA Adobe Media Encoder CC 2014 version 8.0.0.0 {663DEEEF-EF34-4DCB-8687-73A7AA146E02}: 8.0.0.13 is not supported by this version: 7.0.0.103 of VEINS

  ERROR: DW021: no support included versions of load

  -------------------------------------------------------------------------------------

  < / PRE >

  Link for download & install and installation & activation problems can help

  -Online chat http://www.adobe.com/support/download-install/supportinfo/

• Crash Adobe first and Media encode

  Good evening

  When I export a Media Encoder first film, first Media Encoder crashes.

  Is there anyone who has gone through this too?

  Today I installed a new GeForce GTX 650Ti and it does not solve the problem.

  I am on Windows 7 Professional

  Hope someone can help out me.

  Best regards, Wim

  Your colleague Dmitri Tikhonov has the solution for this problem. It had to do with Quicktime Player.

  The solution proposed to Dmitri was:

  1. Uninstall Quicktime player

  2 re - install Quicktime player

  3 start SOUL while holding the SHIFT key while loading.

  And now it works fine!

  Thank you all and especially Dmitri to solve the problem!

  Best regards, Wim

• Where again and Media Encoder?

  I bought the student/teacher version today.  I am not yet or the Media Encoder in my apps list.  What gives?  I really need these two programs.

  If the products do not arise, they can not supported on your system. All video products require a 64-bit operating system support. That said, there is no separate list of these products. Yet is related to the creation and the media encoder is isntalled with him as well (After Effects, Photoshop or anything...). ERGO, by installing the first you get everything you need.

  Mylenium

• I can work on after effects being coded by best practices and Media Encoder file

  I just found out that after effects files can be returned outside the program using the media encoder.  I had been made in after effects of .mov, then open the file in photoshop to render the .mov to a mp4.  Not the process faster, but it worked.  If I use media encoder to make my legacy model would still be able to work in AfterEffects and edit and save the file rendered in media encoding, or it is locked?  I hear also the media encoder is slower than the after effects encoder.  What are the best practices for a comp sequelae which makes a mp4 (h264)?  Thank you...

  Depending on what you do the SOUL can be slower than using index rendering, but that's the only thing that you must use to make H.264 files.

  When you send a model to the SOUL a virtual copy of this composition that is the source for this rendering. You can continue to work on the same computer and additional changes but if you want these changes appears you will need to send this model to the SOUL again after making the changes.

  Almost without exception, I'm working on plans not and certainly never movies sequences in After Effects. My average computer is probably seven seconds, my average film is probably 30 minutes so I use AE to work on plans for effects which cannot be treated in my NLE. I almost always send a model to the SOUL to render a h.264 or a suitable production master, or both, and then I continue working in AE because I can't afford to wait for a rendering time. On almost all of it is the more efficient workflow.

• After Effects and Media Encoder do not use system resources!

  Hi all.

  I have a small problem with the AE and me. None of them use all the resources of my computer.

  I have 8 GB (2 * 4 GB) of RAM and an Intel i5 - 2500 K CPU.

  When rendering previews, AE takes forever to load the clip (about a second image every 10 seconds). When rendering (encoding) clips inside of ME and AE, everything is extremely slow. This only happens when I'm making large compositions, or using pre-made (and very large) model effects.

  Course of the coding, AE / ME use about 50% of the CPU and RAM, instead of the full capacity. Surely they would be better if the use of the full system resources?

  I even tried setting the priorities of processes for AE and ME "Very urgent", but this doesn't make much difference.

  AE already has 39 GB of space available for the cache, preview is disabled during the encoding in me. I gave them as much RAM in their respective preferences, but this makes no difference. I understand that the programs will be a bit slow when the compositions of work with high calibre, but they do not even use as much capacity is available on the system.

  I take a little over an hour to encode 30 seconds a clip.

  I hope you can help - much thanks in advance.

  -phoenix

  PS the two pieces of software is CS5.5

  Nothing to correct because nothing is broken. The programs wil ltake what they need and not beyond that, or more specifically, what are their internal infrastructure can be used. Many encoding jobs require a strict linear processing, like many effects in AE, which severely limits the ability to use multiple cores / processors to anything. Moreover, things like access to the linear files in formats based video suite would consist of the issue. And finally, of course, it matters a lot what is happening in your projects. If your film is loading slowly, move it to a faster drive. If it is compressed, decompress / convert. If you use slow effects, replace them with faster commercial third-party plug-ins if you return to clips, speaker of image sequences. The list for the optimisation potential could go on and on, but suffice it to say that none of this implies simply by pushing a magic button or checking a specific option. You must learn these things and refine their experience.

  Mylenium

• Adobe first Pro and Media Encoder

  Hello

  IM really new video and need a DVD of what I did.  I was following this Adobe page: using Adobe Premiere Pro | Export to DVD or Blu - ray disc .  I got to the step that says: Choose file > Adobe Dynamic Link > Send to still I chose all my gear in my project of Prime Minister, went to the found file, Adobe Dynamic Link and grayed - out cannot click on it.  I don't know why it's directions to Adobe when still isn't a current application for them from what I can tell.  It is not in their app list when I look to the top of their CC applications.  They encode which is what I am using, but I don't know how to use it and I'm not finding the information I need. 

  My end result needed: a DVD that can be played on a DVD player.  That's all.  I'll be very grateful for good info on this.

  Thank you.

  See here:

  How to download and install Adobe Encore CS6

• H.264 or Media Encoder problem problem

  Im having a problem exporting my movie, every time I try to export it, it remains like this, ive waited 2 hours, but none. I tried to clear the space, yet no

  

  and there is a former lower-right on the picture, when I press this, it says this:

  

  just in case where you can't see it, it says 'low level exception in H.264' I erased it, still it keeps going for ever and ever. pls tell me what to do. Thank you

  Hi therealk,

  Any other codec works for export?

  Thank you

  Kevin