Premiere PRO and Media Encoder does not load

Similar Questions

• Photoshop, Illustrator, Premiere Pro and Media Encoder - impossible to install/update

  They all failed to install or upgrade to the versions of 2014.

  Exit code: 6

  Please see specific errors below for troubleshooting. For example, the ERROR:

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 2 error (s)

  -Payload: Package redistributable Microsoft Visual C++ 2012 (x 64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20}.

  ERROR: third charge useful Installer vcredist_x64.exe failed with exit code: 2147942750

  ERROR: Failure of the Package redistributable Microsoft Visual C++ 2012 (x 64) to repair. Please try to fix it by double-clicking the executable file in "C:\Users\DANIEL~1\AppDat".

  I just joined the cloud today and I really want to start today as well, but they do not, and I need help to solve.

  MoarDan it seems your redistributable Visual C++ 2012 must be reinstalled.  You can reinstall this essential component of your latest Visual C++ downloads supportedWindows operating system.

• Premiere Pro and Media Encoder crashing when exporting since the upgrade to 2015

  I need to get a story out today and I can't export. Whenever it blocks 3/4 of the way through. Same thing with me. Read all the forums and trying different solutions - thought should autosave, I get an error since the update whenever it saves automatically-, but will have turned this off & still crashed. My MAC is 3 months and to spec. Please someone make me know that if there is a solution - I can't open the 2014 project and am out.

  Hi Liz,

  Have you tried to disable the GPU acceleration?

  Can you please provide more details on your hardware specifications?

  Thank you

  Regalo

• .wmv cut in half horizontally inside Premiere Pro, AE, Media Encoder...

  Hi all! I'm having a problem with the help. WMV in AE, Premiere Pro and Media Encoder. Whenever I open the picture in a sequence or the source window, the image is cut in half horizontally (see photo below). I brought in a MP4 and had no problem so for now, I think I've narrowed to strictly a. Problem WMV. The file plays perfectly fine in real time; sounds great, photo (from what I can see) seems good; Miss me just the top of half of all hehe to WMV file. I tried the WMV inside AE as well but that you have the same problem. I also tried to export WMV with Media Encoder but it exports the WMV cut in half any format I said the file conversion to...

  My Premiere Pro, AE and Media Encoder are perfectly up-to-date; My 660 it from Nvidia is up-to-date; I just installed latest Windows 7 codec package; Just installed Windows 7 x 64 new updates.

  Also, it is a great note... It is the first time I used the first Pro/AE/Media Encoder on this system. I just built this PC about 1 month ago and have had 0 problems with it other programs (Photoshop, 3ds max, etc...) I recently installed first, AE, Media Encoder on it and am running on this problem on my first start of first/AE/Media Encoder.

  My system specs are displayed below the photo and file specs.

  The photo below shows my configuration and the question that I have. Finding Nemo video on the left is the. MP4 (file specifications are below) and the video on the right is the. WMV in question (also sheet below).

  

  I tried several different bitrates WMV, etc., and each of them do this 'cut in half thing..' No problem with other types of files well!

  The. WMV is...

  Type: Windows Media

  File size: 8.5 MB

  Image size: 1920 x 1080

  Frame rate: 29.97

  Audio Format: 44100 Hz - 16-bit - stereo

  Project Audio Format: 44100 Hz - 32 bit floating point - stereo

  Total duration: 00; 00; 00 14

  Pixel format: 1.0

  The. Specifications of the MP4 are...

  Type: MPEG Movie

  File size: 1.4 GB

  Image size: 1920 x 1080

  Frame rate: 23.976

  Audio Format: 48000 Hz - compressed - stereo

  Project Audio Format: 48000 Hz - 32 bit floating point - stereo

  Total time: 01:40:47:21

  Pixel format: 1.0

  Created by: Adobe After Effects (Windows) CS6

  My system specs are below.

  ------------------

  Information System

  ------------------

  Operating system: Windows 7 Ultimate 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130318) - 1533

  Language: English (regional setting: English)

  System manufacturer: ASUS

  System model: all series

  BIOS: BIOS Date: 19/04/13 17:27:15 worm: 08.01

  Processor: Intel Core i7 - 4770K CPU @ 3.50 GHz (8 CPUs), ~3.5GHz

  RAM: 32768MB RAM

  Available OS memory: 32706MB RAM

  Page file: 8393MB used, 57018 MB of available space

  Windows Dir: C:\Windows

  DirectX version: DirectX 11

  DX setup parameters: not found

  DPI setting: Using System DPI

  System DPI setting: 96 DPI (100%)

  DWM DPI Scaling: disabled

  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  If I think of any information that may help narrow this question, I will surely post it! Thanks for your help everyone.

  -Mitch

  Win Update breaks WMV http://forums.adobe.com/thread/1252244

• I have uninstall it by accident with Adobe Acrobat PRO DC with third party software.  Now I can't install Adobe and creative cloud does not load apps.  How a fix it?

  I have uninstall it by accident with Adobe Acrobat PRO DC with third party software.  Now I can't install Adobe and creative cloud does not load apps.  How a fix it?

  Hey bellmarg,

  Please uninstall Adobe CC using this cleanup tool use the Adobe Creative Cloud cleaning tool to solve installation problems, restart your computer & reinstall it using this link Adobe Acrobat Pro DC: PDF Converter, convert PDF files from anywhere.

  Let me know how it goes.

  Kind regards

  Nicos

• Export to Flash (.fla) file! -Media encoder does not work. Export failed!

  Hello

  A few weeks ago, I bought creative cloud and especially Flash Pro programs.

  I use a PC for Windows 8.1.

  I had just finished my project and wanted to export by clicking on file-> export-> export video. Now, a new Panel arrives and wants to know certain specific issues, as usual.

  After you click 'Export', he will now try to download this file to the Media Encoder. And that is the problem: Flash, then mentions that the file could not be imported to the Media Encoder, and at the same time the media encoder will say the same thing: "this file cannot be imported", or "this file cannot be read.

  I don't understand the media encoder cannot be not able to import a normal "FLA" - file and then put it in a .mov, .mp4 or whatever it is for Windows.

  I did not and do not want to use the quick time player, that the video would be able to play whith. And I can't imagine that the media encoder does not have Windows-compatible video formats to be does. But, as I mentioned before, it is not yet I would go that far, because he's not import the file!

  I already tried to reinstall all the programs, and each of them are also updated!

  So far I have not really found someone with this problem after doing a lot of research on the Internet!

  Thank you very much!!

  Your

  Rich

  You can open the video in any player after convert you, but adobe media encoder requiring some QuickTime plugins to work...

• Windows Media Player does not load on my desktop HP H8 - 1080t

  Windows Media Player does not load on my desktop HP H8 - 1080t.  I'm using Windows 7 OS.  When I click the icon, I get a small flash, and that's all.  Thank you.

  You can fix the problem with Windows Media Player in uninstalling and reinstalling Windows Media Player via configuration, programs and features Control Panel, add/remove Windows components.

• A friend gave me his iPad 5.1.1 iOS.  I plugged on my desktop to load (I have also 2 iPod Touch from my iTunes library), but the iPad indicates there is no SIMcard (?) and that it does not load.  That pasa?

  A friend gave me his iPad 5.1.1 iOS.  I plugged on my desktop to load (I have also 2 iPod Touch from my iTunes library), but the iPad indicates there is no SIMcard (?) and that it does not load.  That pasa?

  The iPad does not have a SIM card. Most are wifi only.  The USB jack on the side of a machine very likely does not provide enough current to recharge an iPad. Use the power supply provided 2.1 watts (if you have one - if it isn't get a).

• MS Office 2010 Pro and my printer does not work,

  I just installed MS Office 2010 Pro and my printer does not work, I tried to print a test page for the printer, but that prints either, ask if I want to troubleshoot the printer and when I click on Yes, I get a message that there is a problem of ActiveX.  The printer will not print not any application, but it worked before installing office.
  All the apps work except in order to print it.
  I am running WinXPPro w/sp3.

  Jim K.

  Hello

  1. What is the exact error message?
  2. don't you make changes on the computer before the show?
  3. What is the brand and model of the printer?
  4. this problem occurs with all files that contain the Active X objects or specific file?

  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2:
  Try the steps in the link and check.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:
  

  This problem occurs if the security settings for the Local computer zone are configured to prevent the ActiveX content to run.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry : how to back up and restore the registry in Windows

  a. Click Start and run, type regedit.exe, and then click OK.

  b. expand the following registry subkey:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\0

  (c) in the right pane, right-click 1200 and then click on edit.

  d. in the value data box, type 0. Then, click OK.

  e. close the registry editor.

• Media Encoder does not from Premiere Pro

  I'm having issues export from Premiere Pro - I've had enough of queue through Media Encoder so I can move on to the next edition, but when I select the queue and Media Encoder opens, it does nothing - just sitting there with "not currently Encoding" rather than import the data to export.

  Help?

  • Adobe Media Encoder, 6.0.2.81
  • Installed as other products CC Ps, Pr, Id, Lr, AI, etc.
  • I ran Adobe Updater but no update available for me.
  • Mac OS X 10.7.5 (Lion)
  • I use Adobe Media Encoder via a subscription to creative cloud
  • Project 6 minute film shot on the Sony (AVCHD) FS700 and Premiere Pro exports
  • No error message, just no enforcement action
  • Have not seen the problem before that - most of my work is Canon 5 d MK III vi, so maybe it's a problem of Codec Sony? Although I exported the images from the camera before...
  • Apple MacBook Pro 17 ",
  • I use acceleration GPU of Mercury Playback Engine in Premiere Pro

  See you soon

  Finally got fed up and rang Adobe (if all else fails...)

  Member of the open video Support team my library folder (Go\Go to folder...\~/Library/) and then went into \Preferences\Adobe\Adobe Media Encoder\ and changed the folder called 6.0 to 6.0old (i.e. rename it to something else), then click queue in Premiere Pro and the project successfully opened in Media Encoder and was able to start coding.

  I hope this helps someone else suffers from the same issue!

  Ollie

• I have a MacBook Pro 13 inch early 2015 and when I connect to the power supply the connected is loose and my Mac does not load. Please help me

  MMacBook does not load

  Looks like you have is connected wrong charger (you have an older Mac in the House?) or the charger has been damaged. Perhaps the magnetic head is damaged.

  You have another mac or a friend with a mac that has the same charger if you can try that?

  You can certainly buy replacement chargers, but I recommend that ensure you it is the charger that is the first problem to avoid spending money. If this is a problem with the port on the Mac, then a replacement charger will not help.

  If you don't have a 2nd charger to test, you can take your Mac at the Apple Store or your local electronics store that sells Macs and ask to try the plug one of their display models.

• Adobe Media Encoder does not wait state

  Processor: Intel Core (TM) 2 Quad CPU queue 6600 to 2.40 GH Z

  Memory: 8.00 GB

  System type: 64-bit Operating System

  Operating system: Microsoft System 7 Ultra

  When you transfer a video of 1 minute 11 seconds of Adobe Premier Pro Adobe Media Encoder 5.5 5.5, the file is located in the Media Encoder for hours in the waiting state and never complete.

  All my software Adobe is up to date. How can I fix this problem?

  The status "pending" indicates that the work is ready to be encoded. From CS5.5, default SOUL does not start the queue processing automatically. Instead, he's waiting to start the encoding by clicking on the button start the queue at the top right of the window - it seems that the play button on a media player or editing app. Watch Folders are an exception to this rule: the jobs that come through watched folders starts automatically by default.

  You have the option to have the SOUL to start coding automatically. To do this, check the "queue start automatically when idle for minutes" and set the desired timeout.

• Satellite M60-170: Express media player does not load

  Hello

  I guess I have a problem with the express media player on my satellite m60-170.
  I have inserted an audio disc or a dvd and the laptop does not work.
  When I press the cd/dvd button, instead of 'Act' as it should, it just support windows (such as pressing the power button), open the media player and start playing the disc...

  (The cd/dvd button is attributed to "cd/dvd")

  any suggestions?

  thanx.

  Hello

  Please, go to the control panel and choose the application of controls of Toshiba.
  On the first page, you have two options: CD/DVD and internet buttons.
  Click on the CD/DVD button and select the CD/DVD
  In the media applications tab, you can try to choose the express media player.

  Note: Make sure that the express Media Player has been correctly installed on your laptop.

• Windows media player does not load on vista? Help, please

  I'm running vista biz, my windows media player will not load upward. What happened just intill I tried to load service pack 2 failed twice? now, I can not WMP to work at all, I can't remove it or install a new version, that all ready because I? some can please help me, I don't want to have to reload vista due have a computer biz and a lot of program and other things on it. Please help... oh also means I can't stream from the internet?

  There is no showing WMPlayer.exe is good. You must run SFC and CheckDisk and make the
  other procedures to make it work.

  After ALL the above if necessary to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  Rob - bicycle - Mark Twain said it is good.

• Adobe Media Encoder does not start

  No OP, but I have the same problem. SOUL just does not work. Double click it to load, I can see the process in Windows Task Manager, but he goes right again. Tried this .xml file shows the deletion, but does not. Here's my spec in the FAQ:

  • What version of Adobe Media Encoder? Include the minor version number (for example, Adobe Media Encoder CS6 with the 6.0.1 update).
    • SOUL CC from first cc 7.0.1
  • What other Adobe applications you have installed and what application are you using Adobe Media Encoder with?
    • Premiere Pro. Premiere Pro
  • You have installed the latest updates? (If not, you should. They fix a lot of problems).
    • Used the creative cloud to upgrade to the latest version
  • What operating system? This should include specific minor version numbers, like "Mac OS x 10.6.8" - not just "Mac".
    • Windows 7. All update patch installed.
  • Using Adobe Media Encoder via a subscription to creative cloud?
    • Yes
  • What type (s) of the source footage? When talk of your source footage, tell us about the codecs, not only the types of containers. For example, "H.264 in a .mov container,' not just 'QuickTime '.
    • S. o. App launch
  • If you get error messages, what is the integral of the error message text?
    • No error message
  • The problem is only occurring with a specific output format or preset encoding? If so, which? If it's a custom screened not included with SOUL, then download the preset on a file sharing site and provide a link.
    • N °
  • What you were doing when the problem occurred?
    • Start the computer. Launch the SOUL.
  • He has already worked before?
    • Yes.
  • What other software do you use?
    • Google Chrome
  • You have installed third party codecs?
    • Avid DNxHD, Cineform Studio
  • Tell us about your hardware. Make sure especially to talk about I/O of third party material (e.g., AJA, Matrox, Blackmagic or MOTU).
    • Regular desktop
  • Using acceleration GPU of Mercury Playback Engine in Premiere Pro?
    • Yes.

  For those who had the same problem and found this thread:

  I ended up reinstalling everything and it works.

  Uninstall applications CC one by one and then after everything is gone, including the creative application of cloud, run the cc adobe cleaning tool. Then reinstall all.

  Suck Cloud applications