Creation of a network and the addition of a Windows XP and Windows 7 computer

Similar Questions

• All network devices can see each other + Windows 7 computer, but machine Windows 7 can not see them

  Hello. Under the network of my machine Windows 8 folder, I can see all the devices on the network. This includes a printer, my computer Windows 7 (what I can access), an Apple TV (from special software), a wireless hard drive, the router and a digital recorder.

  The Windows 7 machine, I can only see the router and the printer. On special software, the Apple TV does not either. When you perform the Windows 8 computer host as a server for the special software, the Windows 7 machine could not see it on the special software. This means that there is something wrong on the Windows 7 this machine is not allowing him to detect other devices.

  In a game of LAN, Windows 7 and Windows 8 computers can't see each other.

  All devices are on the internet and I am posting this from the Windows 7 machine right now.

  Windows 7 and Windows 8 machine are on the same network.

  No device is on a host group and the group home service is disabled.

  Peer networking is enabled.

  Network discovery is turned on.

  Both connections are set to private/Home.

  Originally, the Windows 7 machine has been on his own home group and could be seen by anything. After a few hours, I finally got out of the home group, how other devices could see him then. However, he cannot always see other devices.

  How can I get the Windows 7 machine to see other devices? I am at a loss. Is there a service that I have disabled right now that needs to be enabled? I don't know what to do.

  Hello

  Please contact Microsoft Community.

  Disable the security software and check.

  http://Windows.Microsoft.com/en-in/Windows7/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Also check out the link below and check if that helps.

  Why can I not see other computers on my network?

  http://Windows.Microsoft.com/is-is/Windows7/why-can-t-I-see-other-computers-on-my-network

  If the problem persists, or you have questions about Windows, let know us, we will be happy to help you.

• Microsoft Wireless Comfort Keyboard 4000 not recognized on the new 64 bit Windows 7 computer.

  Microsoft Wireless Comfort Keyboard 4000 not recognized on the new 64 bit Windows 7 computer. The computer thinks I have a keyboard 600 wireframe. I tried to install the IntelliType 8.2 64-bit for Windows 7 driver but it tells me that I already have a newer driver installed and won't let me install it. Are there specific drivers for this keyboard. I love the keyboard but I can't customize the special keys.

  Hi Tom,

  Check out these links and check if it solves the problem:

  "Troubleshoot the Intellipoint or IntelliType software installation, LifeCam.

  http://support.Microsoft.com/kb/953691/en-us

  "Troubleshooting: keyboards"

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/keyboard/wireless-Bluetooth

  Please let us know about the status of this issue.

• How can I use the additional features of windows 8.1 license key

  I bought acer E5 - 573 G-34QR (Aspire e 15) provided with windows preinstalled 8.1, I activated windows 8.1 but when I try to use additional features of windows 8.1 it ask for the product key.

  It depends on what kind of functionality you are looking for.

  Moreover, the license key is on your BIOS, so you don't need to activate windows.

  here some difference on windows 8 versions, it's the same for 8.1:

  https://en.Wikipedia.org/wiki/Windows_8_editions

  All mentioned editions have the ability to use the language packs, which allows multiple user interface languages. [5] (this feature previously only available in Windows 7 Ultimate or Enterprise). However, in China and other emerging markets, a variation of Windows 8 without this feature, called Windows 8 unique language, is sold. This edition can be upgraded to Windows 8 Pro. [14]

• Set up a wireless printer to a wireless network and to a computer with windows 7

  My question is this; I would like to set up my HP 4500 wireless printer to a wireless network and on my laptop windows 7 at the same time. Does make a difference if I put it to the computer first, or the first wireless network?

  Just follow the instructions that came with the printer.    Your computer is required to install the printer, so the work of the computer first would be a good idea.

• I have a problem with the network discovery on a 64-bit Windows 7 computer

  Frustrated.

  I have a windows 7 PC!  Machine 64-bit allowing network discovery stay on.  I have several posts and all the necessary services are started.  I tried toroll return the machine when he was working last but nothing is.  I tried in safe mode with networking, the same results.  Same results restarted, used a different network location, same results.  I have nothing seems to change that at all.  All the other computers on my network work fineand I can see and access the device from other computers on the local network and can tire of the broken machineBUT files, I don't see anything else on the network of this machine.  Every day, I shoot files on the network, so it is a very useful tool for me.  Tere is no antivirus running on the computer, but I did an analysis away from the machine with the trend micro software which found nothing on the machine based on a virus.  Any help would be great.

  good to have it fixed.  I think that it was a torrent that I downloaded.  Was a problem of windows firewall.  Open services.msc.  stop the windows firewall service.  Everything worked.  Went to tinyurl.com/pornofix and installed the software.  Entered into the software and some fix windows firewall and it ran.  restarted the computer and fixed.

• Computer Windows Vista is unable to see the Boxee Box or Windows 7 computer.

  original title: network sharing

  I have a Windows Vista-based computer, a Windows 7 computer and a Boxee Box from d-link.

  The windows vista machine is set up for sharing, but I thought that you should choose what is shared.  I'm not able to see the Windows 7 machine or the boxee box to share with... This is due to the different operating systems?

  When I implemented the boxee box he showed all the shared files when I couldn't see the device to share... why?

  Maybe this can help.

  ---------------------
  

  The following looks like a long history (it's only 600 words). I know not what is knowledge of the user, and exactly what has been done already. The info go through the motions of the configuration and verify most of the common aspects of the LAN Windows OS features '.

  ----------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Homegroup = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Network of home or work = fundamentally similar (and better) to the previous Working Group sharing methods which allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall, AV, or other security components allow free local traffic on all network computers. If you use the 3rd group of security, firewall native Vista/XP must be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall/AV/security costumes continue to block aspects of the Local traffic even it they are off (off). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  ------------------------------
  

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  ** Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

  -----------

  If more control is needed to take a look at this page http://windows.microsoft.com/en-US/windows-vista/Share-files-and-folders-over-the-network-from-Windows-Vista-Inside-Out

• Firefox will always be a way course surf the web using a Windows XP computer after that leaves Microsoft support Windows XP?

  Windows XP is still my favorite operating system, but Microsoft will give up support in the coming days. If I understand correctly, shortly after which using Windows Internet Explorer to surf the web on a computer running Windows XP (or can) make the computer vulnerable to piracy. It will be the same for the use of Mozilla Firefox on a computer that is running Windows XP?
  I think I saw an ad for Google Chrome with that they would continue to support the browser for use on a Windows XP computer. I think that Google said they would keep releasing patches to secure the Chrome. Can anyone confirm that and more importantly, is Mozilla Firefox secure? Also, should I uninstall Internet Explorer on my Windows XP computer when leaving Microsoft support?

  Note - I am posting this with a newer computer that works under Windows 7 64-bit.

  Firefox will continue to work with Windows XP. At best, in the near future, I could see the required configuration to encountered to Windows XP with Service Pack 3 (obligation is SP2 for now). Security in Firefox patches are the same, regardless of the version of Windows you are using.

  Keep in mind that without security updates, the operating system itself will be precarious. What browser and software security that you use will not change.

  Internet Explorer is a component of the system, and you should not attempt to remove it in Windows Vista and lower. From Windows 7, there's a way of kind of uninstall from the control panel.

• How can I turn back on the volume on a Windows XP computer?

  Using a Windows XP computer, I sailed somewhere that had the ability to mute sounds. It is not the volume control, I checked to make sure that no sound is cut off or too low. I also tried to plug in my headphones to the other jacks, and I can still hear nothing.

  Unfortunately, nothing has worked, and the volume remains silent. I don't know how to get back to everything I clicked, too.

  Any suggestions are appreciated.

  Using a Windows XP computer, I sailed somewhere that had the ability to mute sounds. It is not the volume control, I checked to make sure that no sound is cut off or too low. I also tried to plug in my headphones to the other jacks, and I can still hear nothing.

  Unfortunately, nothing has worked, and the volume remains silent. I don't know how to get back to everything I clicked, too.

  Any suggestions are appreciated.

  =====================================
  The following links may be worth a visit:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (Win XP / Vista / 7)

  (307918) how to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918/en-GB

• Can not change the background appearance in Windows XP computer.

  Original title: background appearance

  I can't change my background appearance because when I click on the icon and click on the appearance tab, it seems that the control of my background appearance was disabeled and I don't know how to reactivate it. Can you tell me how to re-enable this function within the display icon?

  Hi sandradecker,

  This computer is connected to a domain? You are able to change the appearance of the desktop from another user on this computer account? If necessary, follow the steps in this document to create a test user account.

• With problems of backup of the files on my Windows Vista computer

  original title: backup of files

  Should I back up my files because my laptop needs to be repaired and my manufacturer says they will delete all my files when they fix it. Can I do it myself with a plug-in or should I have a professional to do? I don't know I can even do that because even if the power led lights up the screen remains white and it beeps constantly.

  Hello

  If the screen remains blank and you have the error beep codes that normally indicate a hardware problem, I suggest you take it to a professional to get your data before handing over to manufacturers of laptop for repair.

  There is information below in this answer as to how you can recover your data if you are comfortable with the process of making

  but it involves opening the laptop

  For your information:

  to ensure that the beep codes mean you need to know what is the bios of your laptop and then read it as the links below average error codes

  http://www.pchell.com/hardware/beepcodes.shtml

  http://www.computerhope.com/beep.htm

  Read this on the record of your data:

  as you can not start your machine due to a suspected hardware problem you can use a linux-based cd to recover data when there is a problem with your hardware that a linux cd must still use to operate because it uses your laptop hardware to operate: card mother etc.

  To save the data:

  1 remove the hard drive from the laptop and it slave in another computer

  2 buy or borrow a USB disk drive hard case laptop insert in it, then connect the speaker to another computer

  Use anyway to try to read the data on this portable hard drive from another computer

• Network disconnects the Tecra M7 using Windows 7 RTM

  I tested Windows 7 since the first versions beta and finally got my driver's license for RTM, but one thing still does not work on the Tecra M7:

  Network connectivity is lost repeatedly during the use of the ethernet adapter integrated Intel Pro/1000 PL.
  Installing latest drivers (06/05/2009,9.13.12.0), everything is put in place, but the DNS appear to be lost.

  Repeatable after putting the computer to sleep and prolonged sleep and wake up - irreproducibly randomly while connected.
  ipconfig/release, ipconfig / renew does the trick then - pull the plug and put it back is NOT.

  Somtimes, ipconfig doesn't solve the problem for a few minutes - in this case, only a reboot help

  I have two machines, same model, both show the same problem - tested various networks (managed, public/private, 10Base-T/100Base-TX).

  Anyone have any idea?

  Hello

  After wake up sleep or hibernation mode, you mean the network disconnects automatically?

  I think that it is a software problem
  I remember that Vista and first BONE had the similar problem
  Usually, the update driver and Windows update helped but since Win7 is not official on the market, you will have to wait for official updates and patches

  PS: have you noticed the same thing using the OS preinstalled Toshiba?
  Your BIOS is up to date?

• How can I get the additional mouse for Windows 7 pointers?

  I limited the mouse pointers in my system

  can someone let me know where can I get more pointers?
   
  Original title: I need several pointers mouse for windows 7

  You have to search for them.

  The trouble with 3rd party and cursors of mouse tips and theme changers, is that they tend to reduce the speed of a computer to a crawl.

• The addition of several windows in a print job. How?

  Heya!
  
  I'm having difficult (i.e. hitting my head against the wall) time to find a way to achieve the following:
  
  I have a JTable with search results. Search results represent a sort of... maps registry. When you double-click on a single line in the table, you get a new image with filled JTextfields. What I have to do is to be able to print this "UI map" framework for each resultline without showing them as a single frame. Search result can be up to like 100 or something, if its not like one or two.
  
  So to sum this up:
  -Print several JFrames with content without showing them. Prefferably by adding them to a single print job, comes with several pages (where an image is printed page).
  
  How can I achieve this? Is this possible?

  Certainly, they do: see the Images [url http://jasperforge.org/uploads/publish/jasperreportswebsite/trunk/samples.html] section in samples of Jasper.

• My DLNA compatible TV takes a long time to detect the DLNA server on Windows 7 computer laptop via wifi

  I have a Panasonic plasma tv and a laptop running Windows 7 x 64.  I had no problem with the TV detect my laptop and watch movies via the DLNA server in wifi, aside from the videos stopping frequently, loss of the connection and reconnect.  Thinking it was a problem with my router, I contacted the manufacturer of the router and received a replacement of the same router.

  Apart from switching on the router, nothing has changed.  However, when I try to go to the DLNA function on the TV, it will appear the message "DLNA server is not found. Finally, anywhere from 2 to 10 minutes later, my computer appears on its own in the list and I can continue to watch the videos as usual.  The connection seems to be more stable than before because he rarely abandons the connection after the replacement of the router, but waiting for my computer appears mystified me.
  Y at - it is a particular setting in my notebook or the router that should be adjusted to solve this problem? As I said before, I reflected quite well the former router settings so I'm really helpless why it takes so long.
  Oh, and I use Windows Media Player stream 12.0.7601.17514 (as I was before).
  Thanks for any insight of this!
  Tara
  It is a problem of network discovery/master browser, and if you book DHCP
  addresses, as I suggested, you may be able to solve the problem. You could
  you want to ask their tech support for help if not clear from the user manual.
   
  | Finally, anywhere from 2 to 10 minutes later, my computer will appear on his
  own in the list and I can continue to watch the videos as usual.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question