Creation of models custom TelePresence server on the virtual machine

Similar Questions

• Unexpected shutdown of the virtual machine when compacting

  I have VMWare Server 1.08 on CentOS 5.3 with guests from Windows server 2003. the virtual machine uses 2 GB non-preallocated split files. I'm trying to shrink the virtual machine using VMWare tools. After him "are preparing to shrink" the process is over and I click "Shrink now" after a few minutes (this time varies a little) the virtual machine stops. I have a 2nd vm on this host as well and it stops as well. The host is a Dell 2900 with 2 processors quad core and 32 GB of ram and appx 1 TB of storage in raid 5. I checked memory usage and cpu during the process and memory, the cpu more than 100% for a short periods, but goes back down. Any idea what can be the cause?

  I'm not a person "linux", but am learning.

  I appreciate all help.

  Thank you

  RL

  
  May 15 00:56:16: vmx| SCSI0:0: Command READ(10) took 3.059 seconds (ok)
  May 15 00:56:23: vmx| SCSI0:0: Command READ(10) took 2.254 seconds (ok)
  May 15 00:56:24: vmx| SCSI0:0: Command READ(10) took 3.059 seconds (ok)
  May 15 00:56:24: vmx| SCSI0:0: Command READ(10) took 3.059 seconds (ok)
  

  If you get a lot of lines like that it usually means that either-

  -your physical disks are dead slow

  -the virtual disk has not shrunk Age

  - or is it close to corruption

  Some of these lines are not alarming per se - but if you see thousands of them like in your case that should sound the alarm.

  I'll try to use vmware-vdiskmanager with function r - and just clone the drive for growth in a preallouee.

  ___________________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Customization of the comments for the virtual machines deployed from model has stopped working

  Hi all

  (Environment: vCenter and ESXi 10 5.1 hosts running Build #3070626)

  We have a model 2012R2 and a file specification of customization that allows us to deploy the VMs 2012R2 server. It worked well for a while. After the Christmas break, it seems more work correctly and we havn't knowingly changed anything to cause this. We have fixed our ESXi hosts Build #3070626 October 6, but have deployed VMs of model since, without problem.

  We have all staged for the VM in advance (IE AD entry of objects and DNS). And then powered the deployed virtual computer, sysprep runs, but does not seem to apply settings in the customization file (IE rename the virtual computer, set the Admin password, join the domain etc.). If feed us the cycle of the VM, sysprep is running again, but even once, does nothing.

  I have attached the contents of my file guestcust.log of a computer deployed virtual (see below), but I do not see the clues about the problem. I thought initially the error on the first line was important, until I've found it is also present on the virtual machines that have been successfully deployed from this template in the past, so it's maybe a Kipper.

  Does anyone have advice for troubleshooting this?

  TIA

  Mark

  ==========

  guestcust.log

  ==========

  Could not query value reported in the registry (the system cannot find the file specified.)

  Sysprep from Windows Respecialize operating detected.

  Copy the files from C:\Windows\TEMP\vmw7DEB.tmp to C:\Windows\TEMP\vmw8A3E.tmp.

  Rescheduling of customization of the guest operating system.

  "Executing command C:\Windows\system32\schtasks.exe / create /sc ONSTART $ more HIGH/np/z v1 /ru SYSTEM /tr" C:\Windows\TEMP\vmw8A3E.tmp\guestcustutil.exe customize - sealparam \"/quiet/generalize/oobe /reboot\ ' NIC - 4000 - schedulenativeunobfusc ' /tn"VMware Guest OS task of customization.

  At the request of guest OS customization task invoked.

  Remove scheduled task of customization of the guest operating system.

  Execution of command C:\Windows\system32\schtasks.exe, /f/delete /tn "VMware Guest OS task of customization"

  Personalization current 2016 to 1 - Feb - 11 18:32:42

  RPCI: Send request = 'deployPkg.update.state 4 C:\Windows\TEMP\vmware-imc\guestcust.log 0'

  RPCI: Envoy = 'deployPkg.update.state 4 C:\Windows\TEMP\vmware-imc\guestcust.log 0' request, response = ", len = 0, status = 1

  Key successfully open SYSTEM\CurrentControlSet\Control\Session Manager\

  Size of 27 reg_multi_sz.

  Read the multi_sz registry autocheck autochk/q/v value *, size 27.

  value chain of registry autocheck autochk/q/v *.

  1 items back

  Obtained the session mgr BootExecute.

  Native App sysprepDecrypter.exe, arguments "

  Copied file sysprepDecrypter.exe to C:\Windows\system32\sysprepDecrypter.exe

  Update boot run value.

  Created / opened key \Guest Customization\ SOFTWARE\VMware, Inc. successfully.

  New shoe, run:

  autocheck autochk/q/v *.

  sysprepDecrypter.exe

  System drive: C:

  Move the folder "sysprep" to "C:".

  Select * from win32_networkadapter where manufacturer! "Microsoft" and ServiceName =! = "VMnetAdapter" and the manufacturer is not null and MACAddress is not null

  1 objects found. Pointer f049a8. return code 0(0x0)

  "" "0 items found." " Pointer to 0. return code 1(0x1)

  00:50:56:B0:70:46 the value for the property return system

  Setting dhcp for nic # 0

  Return value \\VMT-W2K12R2\ROOT\CIMV2:Win32_NetworkAdapter.DeviceID="10' for the system property

  ASSOCIATORS OF {\\VMT-W2K12R2\ROOT\CIMV2:Win32_NetworkAdapter.DeviceID="10"} where ResultClass = Win32_NetworkAdapterConfiguration

  1 objects found. Pointer eee290. return code 0(0x0)

  "" "0 items found." " Pointer to 0. return code 1(0x1)

  Clear the gateway ip addresses.

  Enabling DHCP on the computer

  Returns the value for the system property \\VMT-W2K12R2\ROOT\CIMV2:Win32_NetworkAdapterConfiguration.Index=10

  DNS server IP configuration

  Execution of command C:\windows\system32\sysprep\sysprep.exe/quiet/generalize/oobe/reboot /unattend:C:\sysprep\sysprep.xml

  Successfully executed the command C:\windows\system32\sysprep\sysprep.exe/quiet/generalize/oobe/reboot /unattend:C:\sysprep\sysprep.xml

  Try to connect network interfaces, try 1

  RPCI: Send request = 'deployPkg.update.state 4 103 C:\Windows\TEMP\vmware-imc\guestcust.log@4000'

  RPCI: Envoy = 'deployPkg.update.state 4 103 C:\Windows\TEMP\vmware-imc\guestcust.log@4000' request, response is "queryNicsSupported", len = 18, State = 1

  Got answer VMX 'queryNicsSupported '.

  RPCI: Send request = 'deployPkg.update.state 4 104 C:\Windows\TEMP\vmware-imc\guestcust.log@4000'

  RPCI: Envoy = 'deployPkg.update.state 4 104 C:\Windows\TEMP\vmware-imc\guestcust.log@4000' request, response = 'connected', len = 9, State = 1

  Got VMX response "connected."

  Network interfaces are connected to 0 seconds

  =============================================

  OK, I myself fixed the end.

  I created a new customization file with exactly the same settings as the old file, and it worked. I can only assume that the old customization file has been altered somehow.

• Creation of the virtual machine on a cluster using the vmcreate.pl script

  Hello

  I checked a few posts on this forum on how to create the virtual machine through vmcreate.pl, but responses was not so clear to me...

  These are the topics I've read:

  Create a VM on the Cluster instance

  How to configure the managed object HostSystem

  So, I would like to create a virtual machine on a Cluster, and not on a specific host. The vmcreate.pl script would have done the job? Or should I change it?

  In the topic = > VM create instance on Cluster I did not quite get, what I need to change...

  That's what I do:

  vmcreate.pl - server 'ESX NAME' - username "LOGIN" - password 'PASS' filename - vmcreate.xml - schema vmcreate.xsd

  
  

  Result:

  Creation of the 'myTestMachine ': VM error

  SOAP fault:

  -----------

  Error string: InvalidArgument

  The fault detail: InvalidArgument

  Here are the values of the XML file:

  < name > myTestMachine < / name >

  blah < Home > < / Host >

  blah < Center > < / Center >

  > Guest Id < Linioch < / comment-Id >

  blah < Datastore > < / Datastore >

  < > 2048 Disksize < / Disksize >

  > 256 MB memory < < / memory >

  < processor number > 1 < / number processor >

  < Nic-network > < / Nic-network >

  < Nic-Poweron > 1 < / Nic-Poweron >

  The values are correct the cause I checked the other perl scripts.

  Thanks in advance for your help

  Michal

  Thanks to xyz222 for the user and post Re: instance of VM to create the Cluster

  I was able at the end of the problem. So simple... The value of the in the xml file should be for example "rhel6_64Guest" and not a random word... that's all!

  sudo./vmcreate.pl--serveur SERVER - LOGIN - password PASS - filename... username/SampleData/vmcreate.xml - schema... /Schema/vmcreate.xsd

  Successfully created the virtual machine: 'teeest2' under host HOST_NAME

• What windows key you use to activate one of the virtual machines on my Hyper-V on Windows Server 2012 R2 Std

  I installed my Hyper-V role and now wants to activate one of the virtual machines, but the key is not recognized.  Should what key I use?

  Hello

  Your question is beyond the scope of this community.

  I suggest that repost you in the Forum of Hyper-V on Technet.

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverhyperv

  Or:

  TechNet Server forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• First construction of DEFAULT DOMAIN for "Integrated Weblogic Server" in jDeveloper 12 c gave ERROR: wlst &gt; error occurred during initialization of the virtual machine;

  Hi my community developers estimated!

  I just installed Oracle jDeveloper 12 c as part of the new version BPM Suite 12 c successfully on my LAPTOP.

  However, when I try to create the first integrated default for the weblogic Server domain to run by using the database of embedded JAVA (do NOT use an external Oracle DB) - I get the following error in the log below:

  QUESTION - how/where can I change the ' USER_MEM_ARGS = - Xms32m -Xmx1024m' specification in jDeveloper, to allow a smaller 'MAX MEMORY setting, instead of Xmx1024m"since I DO NOT have enough memory (virtual) on my laptop to create the default domain.

  Thank you very much!

  Please see from the log of the errors below:

  Add the environment variable to WLST script = - Xms32m USER_MEM_ARGS - Xmx1024m - XX: MaxPermSize = 384 m
  Log file: D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\o.j2ee.adrs\BuildDefaultDomain.log
  Label: JDEVADF_12.1.3.0.0_GENERIC_140521.1008.S
  Home product: C:\Oracle\Middleware\Oracle_Home\jdeveloper\jdev\
  Area: D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\DefaultDomain

  2014 BuildDefaultDomain2.py - 07-04 18:00:03

  cmd.exe /c "" C:\Oracle\Middleware\Oracle_Home\oracle_common\common\bin\wlst.cmd""D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\o.j2ee.adrs\BuildDefaultDomain2.py""
  Process began
  WLST > error occurred during initialization of VM
  WLST > could not reserve enough space for lots of things
  WLST > error: could not create the Virtual Machine Java.
  WLST > error: a fatal error has occurred. Program ends.
  Elapsed time: 437 ms

  Thanks James, I changed the memory allocation in the WLST script and I no longer get the VM error

• Could not enumerate the virtual machines that are used as models

  Hey guys,.

  I have a simple script that collects information from a virtual computer. Unfortunately, I'm getting a lot of mistakes, he doesn't pull out information if the virtual machine is used as a model.

  $date = get-Date-format-M - d - yyyy

  Import-Csv C:\test\servers_mate.csv - UseCulture | %{

  Get-VM-name $_. Name |

  Select Name,

  @{N = 'Center'; E = {Get-Datacenter - VM $_______ |} {{Select - ExpandProperty name}}.

  @{N = "Cluster"; E = {Get-Cluster - VM $_______ |} {{Select - ExpandProperty name}}.

  Host, NumCpu, MemoryGB,

  ProvisionedSpaceGB, Powerstate,

  @{N = "Path"; E = {}

  $current = get-view $_. ExtensionData.Parent

  $path = $_. Name

  {}

  $parent = $current

  if($parent.) Name - only "vm") {$path = $parent. {Name + "\" + $path}

  $current is get-view $current. Parent

  } While ($current. Parent - no $null)

  [channel]: join ('-',($path.)) Split('\') [0.. ($path). Split('\'). (Count-2)]))

  }},

  FolderId,

  @{N = "Manufacturer"; E = {(Get-VMHost-Name $_.)} Host). Manufacturer reference}},

  @{N = ' model'; E = {(Get-VMHost-Name $_.)} Host). Model}},

  @{N = "ProcessorType"; E = {(Get-VMHost-Name $_.)} Host). ProcessorType}}

  } | Export-Csv "C:\test\servers-vcenter-servers-vmpath-$date.csv" - NoTypeInformation - UseCulture

  the output current is like that.

  Name

  Data Center

  Cluster

  Host

  NumCpu

  MemoryGB

  ProvisionedSpaceGB

  PowerState

  Folder path

  FolderId

  Manufacturer

  Model

  ProcessorType

  I just also want to collect the same information, even if the virtual machine is used as a model. Introduction 1 additional column is perhaps something like below. So we can clearly identify if it is a virtual machine or be used as a model? Thank you.

  Name

  Data Center

  Cluster

  Host

  NumCpu

  MemoryGB

  ProvisionedSpaceGB

  PowerState

  Folder path

  FolderId

  Manufacturer

  Model

  Type of processor

  Virtual MACHINE or template

  Erros I receive.

  Get - VM: get-VM VM with name 03/08/2015-12:40:44

  "xxxx" was not using the specified

  filter (s).

  Online: 2 char: 5

  + Get-VM-name $_. Name |

  +     ~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: ObjectNotFound: (:)) [Get - VM], VimException)

  + FullyQualifiedErrorId: Core_OutputHelper_WriteNotFoundError, VMware.VimA

  utomation.ViCore.Cmdlets.Commands.GetVM

  Try something like this

  Import-Csv C:\test\servers_mate.csv - UseCulture | %{

  Notice-EEG - ViewType VirtualMachine-filter @{'Name' = $_.} Name} | %{

  $esx = get-view-Id $_. Runtime.Host

  $_ | Select Name,

  @{N = 'Template'; E={$_. Config.Template}},

  @{N = 'Center'; E = {Get-Datacenter - VM $_.} Name | {{Select - ExpandProperty name}}.

  @{N = "Cluster"; E = {Get-Cluster - VM $_.} Name | {{Select - ExpandProperty name}}.

  @{N = 'Host'; E = {$esx. Name}},

  @{N = "NumCpu"; E={$_. Config.Hardware.NumCpu}},

  @{N = "MemoryGB"; E = {[int]($_.)} Config.Hardware.MemoryMB/1KB)}}.

  @{N = "ProvisionedSpaceGB"; E = {($_.Summary.Storage.Committed+$_.Summary.Storage.Uncommitted)/1 GB)}},

  @{N = "Powerstate"; E={$_. Runtime.PowerState}},

  @{N = "Path"; E = {}

  $current = get-view-Id $_. Parent

  $path = $_. Name

  {}

  $parent = $current

  if($parent.) Name - only "vm") {$path = $parent. {Name + "\" + $path}

  $current is get-view $current. Parent

  } While ($current. Parent - no $null)

  [channel]: join ('-',($path.)) Split('\') [0.. ($path). Split('\'). (Count-2)]))

  }},

  @{N = "FolderId"; E={$_. Parent.ToString ()}}.

  @{N = "Manufacturer"; E = {$esx. Hardware.SystemInfo.Vendor}},

  @{N = ' model'; E = {$esx. Hardware.SystemInfo.Model}},

  @{N = "ProcessorType"; E = {$esx. Hardware.CpuPkg [0]. Description}}

  }

  }

  The error you see seems to indicate that there is an entry in the CSV file for a nonexistent VM.

• A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

  Hello gentlemen,

  I can not only save this virtual machine with Backup Exec 2014 for a long time.

  They are there was no snapshot in snapshot Manager.

  Could you help me?

  A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

  V-79-57344-38260 - failed to create a snapshot of the virtual machine. The virtual machine is no longer exist, or may be too busy to pause to take the snap.

  A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\FRPA111PRIM01.

  V-79-57344-38299-\vm\FRPA111PRIM01 ha-data center (DC) VMVCB::\\192.168.204.42\VCGuestVm\ (DC). To try to take a snapshot of a virtual machine failed because it could not be suspended in a file system.

  Hello

  I found the solution.

  I disabled the JOB BE general relativity.

  and the host where the virtual machine belong was not the right time. No Ntp server has been configured.

  I did and now there works.

  I think that the problem can come from this.

• create the virtual machine from windows NT 4 server with adaptec raid 5

  I have an old Dell (1998) server running windows NT 4.0 sp6a.  He had a raid 5 configuration using the controller raid adaptec SCSI 2940.  2 discs failed who broke the raid set.  I had a disk recovery company to recover the data and they have scratched off readers and gave me a SATA with all volumes.  I found a procedure to create a virtual hard disk (.vhd) and then converted to a hard and used to create a virtual machine in VMware workstation 7.  When I turn on the virtual machine, it begins the process of starting windows, shows the boot menu, select normal or mode VGA, goes through the process of NTdetect, display processor and memory but then gives a BSOD with the message inaccessible_boot_device.

  I changed the hard to affect the buslogic ddb.adaptertype, but it gave me the same problem.

  is there a different driver that I need for an adaptec raid controller or if the typical SCSI drivers should work?  If the typical SCSI drivers should work, so my problem might be in my Boot.ini because it shows that he is supposed to start on the partition (4) and this sata drive may not have scores exactly as they were on the raid configuration.  I tried to mount the volumes not in read-only mode, but the partition that I need to change the boot.ini file is partition (2) what mapping VMware won't let me open mode not readonly.  whenever I have, select it and it opens the partition (1) mode not readonly.

  I know this sounds complicated then I hope I described with precision.

  Hello
  I live in Germany, but my internal clock seems to be adapted to the New York Times.
  Very useful, because most repairs or recovery to the VMware is done the evening or at night.

• Move the server vCenter as virtual machine

  Hello

  I was asked to spend 5.1 vCenter virtual from one cluster to another. I guess that would not big problem, but there is a situation.

  vCenter server 5.1 is sitting on one of the hosts in Group A here is the IBM hosts with AMD processors. I have to move to group B which has HP hosts and Intel processor. This means that I have to close vCenter server to move, but at this stage I am lose the connection to the vCenter server.

  How to move this server to another cluster. vSphere client is out of the question, but also web interface. I guess that some sort of command line should work, but I don't know how

  All ideas

  Thank you very much

  In this situation, there are several options.   All of them require vcenter would fall at some point.

  1 use of vsphere replication to replicate the vm and then stop and start

  2. use converted for vcenter convert and more (you need to turn off the virtual machine to get a clean snap)

  3 use SCP from one host to another

  4 vmotion the VMS to shared storage that can see the two hosts, turn it off remove inventory in one add B and power on

  I don't know there are methods more I do 4 If you can.

  Thank you

  J

• How to activate the Internet connection on Windows Server 2003 is installed in the virtual machine in VMware Workstation 8?

  I have Windows Server 2003 is installed on a virtual machine in VMware Workstation 8. I need it to learn and practice the use of the Active Directory. I've also set up 3 Windows XP workstations connect to it, which means that they can communicate with Server 2003. What is lacking is the Internet connection on all of them. When I run ping 8.8.8.8 in one of these virtual machines, I get, 'Destination host unreachable.'

  I'm not sure, what if the problem comes from the settings in Windows or the settings of the virtual machine.

  Can someone help me?

  Thank you, guys. I was finally able to put in place. It was quite an ordeal to deal with IP addresses and virtual networks. Here's how I did (in the screenshots) in case someone else needs it.

  (I also confess that it is perhaps one of the ways to implement. Maybe there is an easier way to do it with DHCP...)

  1. in your computer where is installed VMware Workstation 8 begin the "Virtual Network Editor." It is located in the folder of installation of VMware Workstation. And implement the network following (VMnet2 in my case):

  

  2 then in VMware Workstation itself in the virtual machine when Windows Server 2003 is installed set up two network as connections:

  This one is for external access to the Internet:

  

  And this one for intranet communications AD:

  

  3. then in the machine virtual de Windows Server 2003 set up what follows for two network adapters:

  For Internet access:

  

  Then, you need allow this connection to share:

  

  And then for the ad access to workstations (ensure that the static IP address is in the range specified in the virtual network over VMnet2 network editor). I've also set up DNS to 127.0.0.1 because I installed on this Windows 2003 DNS server:

  

  4. from the Windows 2003 VM try ping 8.8.8.8. It should work now.

  5. go to each workstation, in my case, Windows XP, each in its own virtual machine and set up the network in the VMware Workstation as follows:

  

  6. then in the virtual machine, configure the network connection for Windows XP workstation. Don't forget to assign a new static IP address for each workstation, which not coinside with IP of the domain (this IP address must come from the range specified in the virtual network over VMnet2 network editor):

  

  7. try first ping the domain, in my case ping 192.168.237.128. And then Internet, ping 8.8.8.8. The two should work!

  Continue with steps [5-7].

• Troubleshooting performance problems with the mail server on the virtual computer

  I have a virtual machine with a mail server installed on a windows OS. But all of a sudden, my clients on the server response times decreased significantly.

  This could be the cause of this problem?
  It could be to do with the network, storage, or resources, but I don't know what steps I could take to determine fault

  Would someone mind helping me with the steps I could take to solve this problem?

  Thank you

  The below document page 20 and 21 accurate meters, you should look at the virtual machine level.

  http://www.VMware.com/files/PDF/Exchange_2010_on_VMware_-_Best_Practices_Guide.PDF

  These counters can be used for any virtual computer not only Exchange.  If you are familiar with ESXTOPs I believe that the best way to deep dive in the diagnosis of performance problems.  Also here is a link for these parameters.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1008205

  This link takes you to http://communities.vmware.com/docs/DOC-9279 which has the description on the stats.

• Unable to start the CD player Win2003 Server / removable on the virtual machine: VMware-8(Host: Win7)

  

  Hello

  I am unable to start Win 2003 Server CD disk / removable on a Virtual Machine (the two VMWare 6 and 8). The snap-snap-in error is attached. I have the right configuration of the BIOS to Boot priority, but is taking the PXE ROM option.

  Please help me.

  Thank you

  Remy

  Hello

  1. it doesn't matter that the 'connected' is checked which is normal. "Connect at power on" is important and must be checked that it is on the screenshot.

  2. now, change the "autodetect" option to point to your 'real' cdrom device (that this laptop has).

  3 If this does not convert your cdrom ISO image 2003 and load through the second option that says "use an iso image.

  4. If this still does not work there is only one possible "your 2003 cdrom is NOT bootable. The fact that it autoruns IN Win7 does not mean that is bootable. You should check by placing it in a different machine of cdrom, restart this computer, bios in order to boot from CDROM/DVD first and see if the change boots. If it does not start even from there then for sure this cd is NOT bootable. So, the important thing is to load the cd on time to start and not inside the operating system to work.

  5. try to download an iso of the trial of the internet windows Server 2003 and use that one to see what is happening.

  6. create a new virtual machine and try here or even better to try another machine with Workstation 8 and see what happens.

  7. it is no coincidence if the CD-ROM drive is not recognized within the virtual machine.

• Cannot save the virtual machine in VMWare Server 2

  Hi all:

  I created a VM (12.1 OpenSuSE 32bits) in VMWare Workstation 7; then I copied it to a host VMWare Server 2.

  When I try to save the virtual machine via the web, the server fails (or at least interrupts the response from Web page), so I tried to save it via command line.

  After searching a bit I found this:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1006160

  The question is now that I can't find any vmware-cmd anywhere, and when I run vmware-vim-cmd I get the following error:

  vmh2: / data/vmachines/postgresql-box # vim - vmware - cmd solo/registervm /data/vmines/postgresql-box/postgresql-box.vmx
  Connection failed: vim.fault.NoPermission

  So I'm stuck... someone can help me?

  BTW: what is ESX, ESXi and what version of ESXi is included in VMWare Server 2?

  Thank you very much

  Luis

  I can't tell you exactly what are the causes of the problem. What I would try (a solution) is to create a new virtual machine in VMware Server with the same specifications as the original one, then copy the two files hard in the new virtual machine folder and edit the .vmx file for the new VM 'OpenSuSE - 12.1 - cl1 - 000001.vmdk' use as its virtual drive.

  André

• possible to install the client tools OBIEE and OBIEE server in the same machine

  Hello
  
  possible to install the client tools OBIEE and OBIEE server in the same machine.
  
  Ex:
  
  Last week I've updated Patch BP1 in my local system, in the process, we got the update also oracle Client tool
  
  But in my Administration tool in the built-in tool automatically updated, we need to install the client tool in my system?
  
  My doubt:
  Please check this screenshot
  http://ScrnSht.com/sskbjb
  Please help me,
  
  Thank you

  You should not install client tools because they will be automatically installed w install the server. The 11g installation guide says "do not install client tools on the same computers that host your server instances Oracle Business Intelligence, client tools are already installed on these computers (as part of the installation of Oracle Business Intelligence)."

  so useful, mark it as good or useful.