Creation of stack panel and Panel to CSC

Similar Questions

• Stacked canvas and tab canvas placed on the table of contents?

  Oracle forms 6i:

  Hi all, I am developing a form .in this I created four paintings there is

  1. table of contents

  2 canvas tab

  3 stacked canvas

  4 stacked canvas fixed field

  Here I try placed three paintings on the content canvas.i open the table of contents and here I placed all three paintings to help

  Display - > stacked views option.after, saving the form and close the content canvas.again I open the table of Contents tab stacked canvas and stacked canvas fixed field the two paintings are disappears.these paintings go to back (hide) of the canvas of the tab.

  any body please help me how to solve the problem...

  Here I am attaching how my form want to look like this.
  

  

  
  

  I attach here how can I get...

  
  

  
  

  
  

  Please help someone
  

  Kind regards

  Stevie

  The fact that you have used the utility of 'Stacked view paintings' the constructor for hide or display a canvas has nothing to do with how the form is saved or executed.  The ZOrder (stacking order) of the paintings works exactly as it does for data-block objects.  If your 'stacked' canvas is listed below your Web 'tab' in the browser of the object then the stacked will be presented behind the tabs.  If you want the stacked to appear always on top and then in the object Navigator drag it above the tabs.

  When running, you control the paintings using SHOW_VIEW and HIDE_VIEW.  However, I understand that you can't HIDE a view if the cursor is positioned in an object on the canvas.  You must move the cursor first, then HIDE the view/canvas.

• Zoom thumbnails to 'group of stacked panels "?

  Is it possible to do, or what I need to change the view, zoom in/out on the desired level, then come back?

  See you soon

  Andy

  AHA... apparently, contrary to other modes of display, these controls at the bottom of a panel cabin (as the cursor size from the thumbnail) be scrolled out of view. I just need to scroll to the bottom of the Panel, and he was there.

  Move along, nothing to see here!

• Creation of a network and the addition of a Windows XP and Windows 7 computer

  Here's what I would do:

  • Create a network
  • Add my Windows 7 laptop to wireless network
  • Add my Windows XP desktop using an Ethernet cable\

  I would like to be able to share music, photos, videos, printers, devices, documents, etc., like how it is done in most of new schools and workplaces.

  I already have atempted this and I'm having the most trouble add the Windows XP computer. Please enumerate the steps from the beginning.

  Thank you in advance!

  Hello

  If there is no consideration of security, you can activate the account invited on all computers and configure the authorization for it.

  Problems of permission and security with Vista/Win7, check the following settings.

  All the users who are allowed to share need to have an account on all computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users.

  Using the functionality of all saved the need to configure authorization for each of theestablished users, it does mean not all those who feel that they would like to connect.

  Users who do not have an account on the computer are not part of the Everyone group.

  If the LAN security is useless and users are not established, then move on the guest account provides the semi-open configuration.

  http://Windows.Microsoft.com/en-us/Windows7/turn-the-guest-account-on-or-off

  ---------------------

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  -----------------------

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Windows dvd creation: my computer crashed and now I can't find the creation of windows dvd that comes with the software. How can I get it back

  Creating Windows dvd:

  Computer crashed this program how to get back lost

  Do you still have the program, but maybe just lost the shortcut for it?

  See what you have here, C:\Program DVD Maker, look for DVDMaker.exe.

  It may be necessary to show both hidden and system files and also uncheck 'Hide known file types' in Control Panel / folder Options / view to navigate to the specified location.

  If you have the .exe, and then you can right-click on the .exe and "Pin" in the Start Menu or use "send to" to place a shortcut on the desktop.

  If you type DVDMaker.exe in Start Menu / search box, or men Start / RUN box, which could launch for you.

  You can try restoring the system also.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

• Cannot cancel the process of creation of recovery media and start a new

  Help me to cancel the recovery media creation process and it all over again because I found that I need four discs to make the establishment of recovery. I did the first disc, but I need to get an another three discs for the process to be completed. It is said that "creation of media recovery is not complete", if I want to cancel the whole operation and start from the beginning later when I'm ready for it. How I can do this, measures or instructions to solve this problem would be appreciated.

  Computer: HP Pavilion dv6-6120se

  OS: Windows 7 Edition home premium x 64

  You can create only one set of recovery disks. So once the process is complete, you will not be able to create a new one.

• Photo stacking? and also save an image for the web?

  Hello-

  (1) when I use PS to superimpose a photo, I load the files to stack under Scripts = can I highlight all the layers- and Auto blend

  After I do and the process is complete - how delete all files I have loaded section layer on the right side of the display box / I can do one at a time and delete them all except the last file that the trash is gray.

  As a work around, I have been closing the PS and re opening and it erases the files off-Surely there is a better way?

  (2) when I have an image ready to save - is it possible for the PS as in save for web, which will reduce the size of the image, then save it small for me to use? I have not found the fly and I was wondering if this feature is included in the PS-

  Thank you

  Rosa

  If you have any other useful layers, you want to keep, you can use Layer - Flatten Image. This will take you to a single layer

  For your second question, use file - export - export as or file - export - save for Web (legacy)

  Dave

• VMware - script the creation of the vm and the operating system installation process

  Hello.

  Trying to determine the exact steps to automate the entire process of creating a virtual machine, and install a linux OS (Rhel/Centos) in the virtual machine. I need to understand the steps to do it entirely from the CLI using scripts. I have seen a few sites that describe the basic process of creation of the VM, which appears to generate the vmdk file.

  I've seen nothing that shows what needs to happen to install the operating system in the virtual machine, in the CLI. This process should be auto/programming, so I can't use the GUI.

  I imagine that the whole process will have to call the process/kickstart file and start from that somehow, but I don't see how the elements fit. The goal is to then have a VM with the required OS/Apps that are then run / deployed by external users on their machines.

  If this process can work, then we can talk to a Council-expert/vmware on the next phase of the project.

  Answer that be detailing how to proceed, or point of item/sites on that would be great!

  Thank you

  I just tested on a Linux system and had to perform the installation of VMware VIX - 1.10.1 - 266898 two times.  It is not the first time without any message in the log file.

  After a successful installation, I ran a .vmx without first modifying the /usr/lib/vmware-vix/vixwrapper-config.txt file and received the error message waited on the specified version was not found and then after editing it, I was able to run the .vmx using vmrun nogui.

• Best way to stack 2d and 3d in a Composite

  Hey everyone, apparently, that I'm really on a binge 3d with Photoshop CS6. It is just a blast! In any case, I seek to understand the best way to stack the 2d and 3d set elements in the same document and maximize the editibility...

  I'm working on a digital décor, and I got the part of the room in 3d and 2d. Thus, for example, the walls, ceiling, floor, table and chairs, corner Hutch are 3D, but the ordinary Hutch and buffet server are in 2d.

  -Table and chairs must be in the foreground

  -Regular school and the server are behind the table and chairs

  -The corner Hutch must be behind all the other pieces of furniture

  Then, you can be now catching on to my little idea... I want that all 3D elements to have the same lighting and reflect on one another, however, I need layers 2d to adapt somehow 'inbetween' 3d objects. The simple question is, how is that possible? Is there a way to mask at the forefront of 3D objects so that they appear to be from 2D objects? My only current solution is the following:

  -Move the 3D layer (the scene) completely set backwards

  -Take the final decision on the position of the table and chairs

  -Hide all other STS on the scene outside the table and chairs

  -Made, so that the edges are clean

  -Load the 3D layer newly rendered as a selection (which support the table and chairs only)

  -Create a new layer from the selection of the layer of 3D rendering or hide the 3D layer so that the table and chairs seem to be in the foreground

  I had not expected this post is long, so I apologize... but as you might assume, the above method means that I can not edit/reposition/scale like 3D at all, so if there is a better way to stack these room elements I would be extremely grateful to one who knows how!

  Thank you!

  Andy

  First of all, I was wrong on layers that need to be hidden to prevent their appearance being included in a new postcard. I misunderstood something that happened when you work with a 3D document earlier.

  Materials supports the transparency/opacity. A material has a setting for opacity that can use a texture. The percentage of opacity material is multiplied by the opacity of the texture.

  When a postcard is created, the opacity of its default hardware control will contain an instance of the texture that is in the diffuse control, which is a file that contains BODY 2D layer (pixels, dynamic object or group) from which the postcard was created.

  Here is an example. Two solid pyramid cracks and a postcard of a cloud layer:

  

  The shape layer where the postcard was created is in the document that opens by selecting Edit buttons highlighted above in the drop-down list:

  

• IE stacking question and video playback

  This page works fine in all browsers except IE. It gives me a weird problem of stacking and the video isn't even appearing on the page (even if audio works). Any suggestions as to why this is happening? Thank you.

  While it is perhaps not exactly the case. ASP pages... I guess it's close enough...

  Since dynamic pages like. ASP and PHP pages consist of several files "building block"... not at all like an HTML page, the first line of the file (and NOT the page... because there may be no single file .asp or php Web page) is the declaration of the type of page... ASP or php... for example, here's how WordPress begins its pages "index.php":

  <>

  /**

  * @package WordPress

  * @subpackage Default_Theme

  */

  get_header();? >

  so the first step is to declare that he is a .php page... then go get the building block file 'header '... OK, since the file 'header.php ':

  <>

  /**

  * @package WordPress

  * @subpackage Default_Theme

  */

  ?>

  http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.DTD">

  http://www.w3.org/1999/xhtml' >

  Declare the type of file, and then put some HTML in... It's so a few steps in the process of assembling a page dynamic Web before the DOCTYPE declaration is made. Yet, given that you never see PHP... you might assume that the DOCTYPE has been declared the first line in the code.

  It is however far from the truth... and I'm sure that this is basically how .asp works also.

  So if there is an error in the DOCTYPE declaration, take a look at your index or header (or whatever that be .asp calls the first file). The actual HTML that is displayed on the page will be there.

  Best wishes

  Adninjastrator

• Smart collection - stacked photos and keywords parents

  Hello world!

  I'm playing with smart collections and wonder there is a possibility

  -to filter photos stacked and / or the first (front) image of a stack of photo...

  -to filter a parent keyword that is not assigned itself-, it should show all the photos with the respective child of key words (but no pictures with other keywords that can contain part of the keyword parent); or more simply put - filter just how that would happen when you press on the-> arrow next to a keyword in the keyword browser

  Thanks for all the inputs.

  Unfortunately, there is no 'empty' option, but using a search the presence of vowels gets around this omission. You can configure a smart collection as shown in the attached screenshot and he must capture all of your images which have no title. There is another variant of this collection intelligent with a, e, i, o, u, y on a single line, but it was broken several times in previous versions, so I tend to not use it.

  

• OMB more creation of site Modules and import metadata?

  Hi all
  
  First I want to thank you all of you in advance for your time and concern. I have serious questions, and I'll ask them in 3 different parties because they are slightly different.
  
  How can I implement the steps below using the OMB more? If you could sample provided script and rating it will be highly appreciated.
  
  -Creating a location of Oracle for a schema and save it
  -Creating a Module and it relative to the location that was created.
  -Import of metadata for all objects in this schema in this module.
  
  For example,.
  
  You have a schema called ORACLE_SRC. I need to create the location and the module for this diagram and attach the other. Then I need to import all the metadata for all objects in the schema of this ORACLE_SRC. During this import all declarations of the reserve must be unchecked. And I need accomplish all of this by using more of the OMB and TCL scripts.
  
  -Creating a location not Oracle (SQL server 2005) to a database and save it
  -Creating a Module and it relative to the location that was created.
  -Import of metadata for all objects in this schema in this module.
  
  For example,.
  
  You have a schema called SQLSERVER_SRC. I need to create the location and the module for this diagram and attach the other. Then I need to import all the metadata for all objects in the schema of this SQLSERVER_SRC. During this import all declarations of the reserve must be unchecked. And I need accomplish all of this by using more of the OMB and TCL scripts.
  
  -Creation of a flat file to a folder structure location and save it
  -Creating a Module and it relative to the location that was created.
  
  For example,.
  
  You have a schema called FLATFILE_SRC. I need to create the location and the module for this diagram and attach the other.
  
  Thanks again for your help and concern!
  
  Kind regards
  
  Mike

  Script guide OWB Oracle 10 g 2 explains that they support only to import metadata of the tables, views and sequences.
  This should explain why your logic does not work for materialized views.

  See you soon,.

  Emrah

• Creation of CD Rescue and Recovery

  
  

  about this problem... by the center of lenovo... messages, I got an update of the system has been proposed... and so I did... I can now create the r & r cd... one of hitch but... After you run the update and restarted... lenovo care is no longer functioning... it does not work when I double click on the link to my office... in any case... CD R & R is much more important... Thanks a lot guys...

• problem with the creation of a folder and a file, read in the header and data

  I want to create a new folder named by time and then generate a file inside this folder txt: reads first header information and then reads the data, but the problem is that if there is this folder, the header appear in the file, if this folder is not existed, the header will not appear in the txt file.

  Thanks for your help.

  Hi Junniji,

  Check the attached vi. I did what Bob was trying to explain in the vi. I documented the steps described in the block diagram. Take a look. I had few comments on your code as well. Always try to connect the wires of the error when coding and try to keep the neat code so that its easy to debug and understand the flow (even if it's a test code ).

  A Subvi missing in vi who sent you there. I hope that you will have in your pc

  Kind regards
  Amine31

  (Give glory to good answers, mark it as a Solution If your problem has been solved )

• The computer starts you see all the individual command windows and they stack up and take the time to load and to hide.

  Why command windows appear indeed when the computer is started?

  Hello

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. it is a possibility that there is a startup program that is launched with a command line and it appears.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.