Stacked canvas and tab canvas placed on the table of contents?

Similar Questions

• Characters Czechs corrupt in the Table of contents

  Hello world.

  I'm working on a project large enough help in Czech. This isn't something that I started from scratch, I took during a colleague who recently left our company, so I don't know much about how it was done.

  The project is made of 3 elements, resulting in 3 CHMS which are then copied into the same folder with other CHM using some sort of algorithm.

  Once all of these files (CHMS 4 in total) are copied to the folder Help software, they are shown as a component only when you click the button in the software - which means that you see a table of contents complete with chapters of each 3 files).

  The problem is when I compile the individual CHMS, I get the message " " "characterparameters HTML help a not supported for the selected language. Do you want to continue? »

  If I continue, the file is compiled and when I open it, the table of contents seems ok. However, when I copy with the other files and open in the software (a program of type CAD) some characters are replaced with something else:

  
  

  I use Robo help 10 and the police in the files is Verdana. I read on another thread than the police could be the problem, but I don't know how to change in all files (except perhaps to Internet Options in the chm directly?)

  My regional settings are also defined in Czech when I compile the file, so it shouldn't be a problem. However, whenever I compile, I get this message and corrupt characters are displayed using the software.

  Can anyone help with this?

  Thanks in advance.

  
  Christina

  
  

  
  

  I use RH 9.

  From my experience, namely character such problems can sometimes more an art than a science. This is what it looks like anyway.

  A few issues involved can be:

  1. Language for non-unicode programs office must match the output of the Control Panel, in the dialog box language and region , on the administration tab, make sure that the language of non-unicode programs is set to the target language.
  2. Language settings in RoboHelp - under file | Project settings, ensure that you have set the language in HR in Czech for all projects. In addition, in the pod of single Source Layouts, right-click on the output and choose Properties in the drop-down list, and language , make sure that it is set in Czech.
  3. Encoding of characters in the file itself - open the file (in this case .hhc) within a text editor like Notepad ++ and in menu coding , check its character encoding. By experience, it must be on encode them in UTF-8 encode in UTF-8 without BOM.
  4. Character encoding in the tag XML - also in Notepad ++, check the coding in the first tag line 1. My hhc file that we translated into Czech, it is set to

• Content filtering to display in the table of contents with Actions (possibly using ActionScript?)

  I have 7 Captivate and would like to know if it is possible to filter some slides of OCD.

  The point here is that they may not be static, but change the slides to show transparently based on the choice of the user.

  == Example ==

  You have a file containing below 3 slides captivate. (A, B, C)

  And each slide content is needed for the subject in []. (I, II, III)

  A [I, II AND III]

  B [II, III]

  C [I, III]

  Lets say the user wants to know about the topic-II.

  While the user should only see slides A and B.

  If the user wants to know on the subject-I, then only slides A and C are shown in the table of contents.

  == == End of example

  In my view, that's not possible with only using Captivate and research to achieve anyway. (for example. Load the captivate through Flash and control the captivate Flash with AS3 file).

  Thanks in advance for your help.

  You have no control of this type on the default TOC THAT included with Captivate. You can have this control, if you create a custom table of contents and use advanced/variables actions. Advanced actions are converted on the duration of AS3 (for SWF) or JS (for HTML5). Since you talk about Flash, I assume you want SWF-output. I know a lot about system variables supplied, there may be some hidden variables that you can solve with AS3 or (better IMO) with JS, but only system variables for the table of contents is to lock or hide/show it (if in overlay).

• WebHelp, view a topic that is not present in the table of contents

  Hello

  I'm working on RH8. I use multiple TOC and created a table of contents with only the first 4 chapters. After having generated the WebHelp by using that FAKE, even if I look for a subject that did not exist in the table of contents, I can see the help.

  Ideally, if the topic is not added to the table of contents, should not be displayed even if someone searches for it.

  Please help me with this.

  Looks like you expect the table of contents to control what is in the construction and it's not the way it works. It is simply the pointer on key issues, which may need to support the topics where you wouldn't wish that the user to start and that might clutter up the table of contents.

  What you see, it's the way it is supposed to work and how a HAT I've seen. The table of contents indicates what you want to highlight, the search finds all that is in the build.

  You can use exclude research in properties, introduced in RH8. In this way the subject is in the build-up but not searchable.

  If you don't want certain topics, use TCC to exclude.

  See www.grainge.org for creating tips and RoboHelp

• Using the table of contents

  Hello everyone, I m using captivate 4 and when im video opening the table of contents is like that (iopen)

  

  I wish it were like that (closed)

  

  If you can help me.

  Thank you very much.

  As I am a foreigner, I am short sentences. I hope you understand.

  To my knowledge, it is not possible to have all groups collapsed in the table of contents when it opens. There is a missing feature, and it would be a good idea to introduce a feature request (link can be found in the homepage of these forums) have introduced.

  If I don't want students to see all slides (and avoid having them all labeled) I turn off visibility for all the slides in a group, with the exception of the first. Which limit the possibilities for navigation, so you must provide a navigation by you appropriate buttons (or possibly the bar of reading), but the table of contents appears less crowded... These screenshots show the settings/result:

  

• RH7 topics in the table of contents report?

  I have a project that has 11 different layouts: 2 go to WebHelp, 9 go to Word, with the content variable determined by the two tables of contents and conditional build tags. The customer wants minor changes to a few topics in the Word output. The fastest way is to edit Word documents and source files separately, due to the time it takes to generate a new output in Word and then reformat the content to make it good.
  Is there an easy way to know about a particular topic, which ToC (or presentation) he appears in? variants of 114 subjects x 11 ToC = a lot of lists to cross-check!

  I just discovered a partially useful answer.
  In the list of topics RH7, it shows a column called "name of the table of contents. Drag this column as wide as possible, and you can see all the tables of contents appearing in the heading.
  After changing topics, I click the Date header to sort by date so that the latest changes appear at the top. Then I see what table of contents that they are, in a view. All what I need now is to print it. I guess there is always a 'Print Screen'!

• The address and tab bar disappeared with the new update.

  While I was out today my computer updated itself and when I got back, I could see is no longer my tabs, the address bar or the menu bar, while on firefox, it shows me just the page that I am consulting... The address bar and the tabs appear when I move my cursor to the top of the screen, but disappear again as soon as I have it away. I prefer much the old way because he lets me keep track of what I was doing at the same time without having to move my cursor all over the screen. Is there a way I can get it back to the old where I can see all at once?

  The sounds that you spent in mode full screen.

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).

  • https://support.Mozilla.org/KB/how-to-use-full-screen

  If you are in full screen view then hover over with the mouse to the top of the screen to facilitate the bar appear Navigation and tab bar.
  Click the expand (in the top right Navigation bar) to exit full screen or right-click on a space empty on a toolbar and select "exit full screen" or press the F11 key.

• Is it possible to customize the sensitive presentation - sequence of the table of contents, Index, tabs filter?

  Hello

  I use RoboHelp 2015 and reactive production layout, I need to rearrange these tabs. I want the tab of filtering of dynamic content to be displayed before the table of contents.

  Is it possible to re - sequence tab filters before tab table of contents by making some backend work in CSS or code?

  

  Or the other way improved - if we select filters say - sales, then sales related subjects should be displayed (rather extended below - just like the expansion of text).

  Is it possible to customize the sensitive provision in this way?

  --

  Thank you

  Christophe

  It is possible through the HTML code. In Notepad, open the file "Topic.slp". On line 35, you will see a list of links:

  

  You can cut and paste the link to get the correct order. The first tag appears on the left side. Please be sure to cut and paste the entire link ''.

• Page numbering and the Table of contents

  I have a book containing 23 document files. Document files contain the page numbers in the footer.

  One of the document file is a generated table of contents (TOC). Unfortunately, the generated page

  the number in the table of contents do not match the numbering of the pages in the files. Here are the details:

  • The title page, in a file by itself, is not numbered
  • The frontmatter, distributed in five cases use lowercase Roman (i - xvi)
  • The body of the text in the remaining 17 files is digital (1-243)
  • The generated TOC uses cardinal numbers of the book as a whole. For example,.
    Chapter I is numbered correctly in the footer from page 1. However, he is listed in the table of contents
    as starting on page 19, because this is the file real 19th in the book. I put the document numbering
    This file from 1 properties and properties of Page numbering for the book as a whole to
    be "continue."
  • The style of the table of contents entries is correct. In other words, the frontmatter uses a tiny Roman and the
    chapters use Numeric

  I tried to regenerate the table of contents, but this did not help.

  Does anyone have suggestions on what is the way prescribed to do?

  OK, I continued to read and this is what I found:

  Set the numbering style in the document, and not in the book that we told you. Format > Document > numbering. Choose Arabic or digital. Repeat for the various chapters.

  

  Save and close the chapters. In the book file, click with the right button on each chapter and choose Configure XXX. This is where tell you the book to continue the page numbering or restart at the 1.

  

  Once this is done, update your address. From there, if there are issues, we rely on the logic of the Fm we use every day, and each of us can help you solve.

• Is Acrobat Pro just for us. We have an employee handbook that needs editing. A part is current pdf, some of an earlier version. You want to get all in a manual, the table of contents automatically adjust and links to specific pages of the table of content

  Is Acrobat Pro just for us. We have an employee handbook that needs editing. A part is current pdf, some of an earlier version. You want to get all in a manual, the table of contents automatically adjust and links to specific pages of the table of contents.

  Acrobat Pro is certainly not the right tool for editing. You want to change the manual using the source - MS Word files for example. Once you have the full changes including OCD work as you want, Acrobat Pro is the tool to convert the source document to PDF format, and ensure the accessibility requirements of 508 - and preferably ISO 14289 (PDF/UA) - are met.

• What is the best way to list the numbers of page and page number ranges in my table of contents?

  I use the feature book to create a catalog.

  Thus, it consists of several files.

  Each file is a 'different' Section that Indesign is concerned.

  Here's my table of contents now:

  

  All page numbers are static.

  Each rounded rectangle, color corresponds to a section (which is a separate file). Some sections have subsections, some don't.

  The catalog changes over time, I would like that all page numbers in the table of contents of auto-update. Less work and less chance of human error.

  I noticed the text variable and tools of text to anchor, but so far have failed.

  What do you recommend?

  I decided to use text Variables.

  -J' I first define the header of each category as a Destination of the hyperlink text.

  - Then I insert a text Variable in the mounting spot in the table of contents, using my simplified page number text variable definition:

  Takes two text Variables with a hyphen between them to express a range of pages. It works well enough.

  A small tip is necessary to the last page of page number. I use a text in the large box in the mount table as a Destination of the hyperlink. He is never seen, but as long as he stays on the right page, it will always give me the page that I need - the last in this section:

  

• A menu button using custom on the slide to open and close the table of contents of Captivate 7

  Hello

  I have a custom menu button. When the user clicks on I want to see the table of contents, (I see there is a State to display the table of contents), but when the user clicks on the same menu again button on this slide how to hide the table of contents. IE, go hide and show.

  Thank you

  Captivate 7.0.1 contains a rocking action that allows you to enable a Boolean variable (for example the system variable that displays or hides the table of contents), and shutdown.  Use this action.

• Topics and new books do not appear in the table of contents after generated in DHTML (RoboHelp v8)

  Until recently, when I tried to add a topic for a book in the Table of contents, I just dragged into the project manager in the Table of contents.  I don't know what is different today, but the new entries appear in the Table of contents pod but not in the generated DHTML.  To make it more confusing, to me anyway, some newly added topics show.

  

  Hello

  I don't think 'huge' search and replace that can affect things. But we need to check a few things first.

  When you look at the SSL recipe, using any type of a conditional build Expression? If so, perhaps you have tagged content and it is not for this reason.

  See you soon... Rick

• Has anyone who has worked with doc us MIL - STD and generated with the success of the page numbers in the table of contents?

  I'm creating a template using FrameMaker 7.2.

  MIL - STD dictates works package (such as chapters) page numbers in the format: 0001-1, 2-0001, 0002-1 and 2-0002, etc.

  The problem I encounter draws in this format of the page number in the table of contents generated.

  I used a variable on the Master Page, and generate page numbers in each package to work properly.

  I know that in point 7.2 of the FM, you cannot include a variable in a table of contents generated.

  So I tried changing the variable on the Master Page to text using a paragraph tag (WPnumber), but have not gotten it either works.

  Tried all the other stuff I could think of, too.

  In my view, a part of the problem is that FM cannot have leading zeros when you set the page number or chapter (understandable 99.9% of the time).

  If anyone has suggestions or solutions, I am very interested to hear.

  Thank you.

  1Editor - and puzzled

  I already manually put the zeros.

  I just want to be clear that strikes the zeros directly on the master page does NOT have to include in the table of contents. You then type in the context of the reference to the table of contents also. In addition, you must have separate template and reference pages for chapters 10, 11, etc., in order to obtain the number of zeros correctly.

  With my method, the zeros are introduced as part of the chapternumber itself, in the chapter number of the TEXT. You still have to type but only once for each file.

• Find/change the question numbers and create the Table of contents

  Hello! I need help to find all my item numbers and apply a paragraph style so I can use them to create a Table of contents page.

  The sample numbers

  #12345

  #12345-5

  #12345-20

  #12345-ABC

  #12345/N

  I tried to enter #^? ^ ? ^ ? ^ ? ^ ? in the search/replace and but it is exactly 5 characters after the sign #. I wonder if you can find all characters starting by # and up until the last characters.

  Once I found all item numbers, how can I apply the paragraph style to have these characters after the sign #? Because I only want to show item numbers without the # sign on the Table of contents/Index page.

  In addition, I have InDesign CS2, which have no function GREP maybe I can do this without the GREP?

  I really appreciate any help. Thank you very much.

  Are your numbers by themselves in a separate paragraph? OTHERWISE you can not USE the table of contents feature to list all the numbers.

  If are, then just look at # in find/replace, then set it to change formatting a new paragraph style (you must create this style in CS2) that you want to include in the table of contents, then as you say, you can use find/replace once more on the history of the TOC to remove the # of all numbers.