Creative Zen and Win drivers & generic

Similar Questions

• Vista and creative zen portable media center

  My Creative Zen PMC is a great personal media player.  Problem is that when I upgraded from Win 2000 Pro for Win Vista, I can no longer be synchronized to the PCM.  It requires Windows Media Player 10, but which will not install on Vista.  Why doesn't MS enable to use wmp 10 on vista, or will never afford it wmp 11 to synchronize with PMC?  If anyone has a solution for this, please let me know.

  Hello

  Windows media player 11(WMP 11) is an enhanced version of Windows media player 10. It has got more features than the earlier version. WMP 11 supports portable devices.

  Refer to http://windows.microsoft.com/en-US/windows-vista/Set-up-a-device-to-sync-in-Windows-Media-Player

  To make it work, you can update the appliance with the latest firmware. Contact Creative for you to get the one appropriate for your device.

  You can download the firmware suitable for the http://www.creative.com/support . While on the site, select a region to download from.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Need drivers Win XP and WIn 7 for Satellite M30x-125

  Hello

  I'm looking for Windows xp and Windows 7 drivers for my laptop Toshiba Satellite M30x-125
  in the site of toshiba, under the download section, my laptop is not recognized, or the serial No.

  where can I find the drivers?
  Thank you

  Hello

  Drivers for Win XP can be found here:
  http://EU.computers.Toshiba-Europe.com/-> support & downloads

  in the driver download-> Satellite M-> Satellite M30X Satellite you choose Archive->

  Unfortunately, this is an old classic and Win 7 drivers are not included in this case, you need to collect the drivers of your own hands.

• Creative Zen Mozaic update driver

  My zen device driver mozaic must be updated by my troubleshooting.  Windows 7, my computer cannot update driver.  Zen is more listed under windows media center.  In recent months, zen was not recognized as a device.  It is now, but how day driver, if not by device & printers (troubleshooting) on my computer?

  Hello

  1. How do you try to update the drivers?
  2. do you get an error message/code?

  Method 1: Update the drivers supplied by Device Manager

  a. Press Win + R keyboard
  b. type Devmgmt.msc and press OK
  c. right-click on the driver, and then select update

  Method 2: I suggest to visit creative support and try to download the drivers manually:

  Creative support

  http://support.creative.com/kb/showarticle.aspx?SID=6843

  If the problem persists, please contact creative support for assistance.
   
  Please report if you need help Windows. We're here to help.

• Creative Zen Stone black USB Media Player 2 GB

  Hello I am looking for the drivers pour Installer my MP3 Creative Zen Stone 2 GB Black USB Media Player thanks

  Hello

  Unfortunately, the Microsoft Answers is able to provide support in English. The following URL will help you to receive support appropriate for your location information. Open the link and select your region from the drop-down list, and then click the arrow to continue.

  http://support.Microsoft.com/common/international.aspx

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Creative Zen Touch MP3 Player on Windows 7

  How do I repair my old Creative Zen Touch 20 GB MP3 player to work with my laptop brand new?

  If your Zen don't get drivers versions & installed by Windows 7 then I suggest you try the Vista drivers/software here:

  http://support.creative.com/downloads/welcome.aspx?nDriverType=1#TYPE_1

  Download the file, right-click on it, select troubleshooting Compitibility & follow the prompts.

  Creative has now review your product as a legacy.

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• Problem with Fingerprintsensor on Portege A600 with Win XP and Win 7

  Hello

  I bought a new Portege with Win Vista on it and Win Xp on a CD Revovery. It has worked on my new laptop. Then I installed Win 7 on it without making a backup of my system of work. It was a big mistake. I downloaded Win 7 of the Toshiba homepage divers. But the Fingerprint Software means that there is no sensor. The driver has been installed. After much trying, I used the recovery CD. Now I have WIN XP on my system with the same problem. It was a recovery with all the drivers CD. He had to work. But it does not work.

  Someone at - it an idea? Could someone help me?

  Best wishes

  Martin

  Hallo Martin

  You are right. It should work fine if there is no problem with the sensor itself.
  Is it difficult for you to test it with Vista image too?
  I mean if the situation is the same, maybe you should contact the nearest authorized service.

  Can you start fingerprinting software?

• Pomp A100-773 and WIN 7: card reader and access keys Fn does not

  Hello
  I hope that this question did not arise 100 times before. (I have not found an answer in this forum)

  Problem:
  Card reader and FN keys do not work, where can I get drivers?

  I installed Win 7 Pro on my laptop Satellite A100-773. Everything works great and Win 7 has all the drivers installed, but the card reader and FN keys do not work.
  On the support home page is not oder pilot anything for this laptop with Win 7.

  Can someone help me with this?

  Tahnks.

  PS: it was not the version upgrade of the United Nations.

  Hi all,

  by now, I tried the extra package toshiba for model serveral for win 7 and vista, but before the installation there is an error.
  the card reader is now working with the card reader for win vista driver.

  Doesn't anyone know how to solve this problem?

• Need sound and webcam drivers for Satellite A660-156

  Hi all

  my hard drive is physically damaged and replaced with a new one. All the data and setting have been copied.

  But I found that you no sound and webcam drivers are installed. I had found them and correctly installed, but still no change. See its icon with indication 'no sound', click on it to solve the problem, but no problems were discovered.

  Offered to see additional information or close the window. The Toshiba site found two audio drivers, but it does not help.

  No idea how to solve this problem?

  Thnx in advance!

  Satellite A660-156 belongs to the PSAW3E series.
  Did you find this series on the Toshiba driver page?

  This series is in the list and you can find the drivers for Win 7 64 bit it.

  You can find the Webcam driver v 1.1.1.16 for Win 7 64-bit and two different audio drivers;
  It is NVIDIA v 1.0.10.0 and the other is v Realtek 6.0.1.6069

  I think you need the first v 1.0.10.0

• NOR-DAQmx Base 2.0 and Win Mobile 5

  Hello

  Can someone tell me if NEITHER-DAQmx Base 2.0 is compatible with Win Mobile 5 devices?

  I try to capture analog voltages and my app very well builds and the charges for the PDA and the PDA does not see the DAQ (6062E) PCMCIA card that I use.

  I ran the installer of 'Base' which has copied the Base/s driver file in the PDA (and I have the basic task OK configuration in VI), but the PDA comes up with an error "unrecognized card". I deleted the driver/s of the PDA database and reinstalled them but without success.

  Is that all just because the Base 2.0 is not compatible with Win Mobile 5?

  Is there a way I can get 2.1 base to work with LV-Pro-8 and PDA - 8 or y at - it another way I can get the drivers on the PDA that handles the card under Win Mobile 5 6062.

  Any help would be greatly appreciated,

  Thank you

  Paul.

  Hi James.

  Sorry for my late reply.

  The problems are a combination of LV8.0, Base 2.0 and hardware failure.

  In the end I went with LV8.6, Base 3.2 and Win mobile 5 with 6024E PCMCIA card or 6062E.

  The basic hardware config utility is a bit different and took a little of violin to go. I also found some documents that lead me the wrong path re save for the project or unit basic tasks, but now I understand it's all good.

  I don't know if your customer still has problems, but I'm more than happy to help if I can.

  Thanks for your help as well.

  Best regards

  Paul.

• Get the Blue error screen "DRIVER_IRQL_NOT_LESS_OR_EQUAL" frequently on windows XP Pro and Win 7

  Hello

  Our Office recently we are facing issue with as "DRIVER_IRQL_NOT_LESS_OR_EQUAL" error blue screen frequently in most of the laptop,

  all the laptop with Win XP Pro-SP3 and Win 7 Professional.

  * It causes while he was working on several browsers or applications.

  * A few times everything by removing the Ac laptop adaptops, getting suddenly Bluscreen problem with the same error as "DRIVER_IRQL_NOT_LESS_OR_EQUAL".

  My troubleshooting:

  According to my Google search, I did the troubleshooting below:

  * In format and re-install with fresh people with Win XP and Win 7 Pro system.

  * Updated with the latest patches from Microsoft.

  * Updated all hardware drivers of Lenovo

  * We use Symantec Antivirus 11.0 client in all laptops, in this way, we had to also call with symantec and log the issue with them. but according to the confirmation of Symantec, it is not caused due to Version 11.0 Symantec

  * According to lenovo support, we have changed the physical memory RAM.

  After all troubleshooting done all too, we always get problem.

  Error message:

  A problem has been detected and Windows has been shut down to avoid damage
  on your computer.

  The problem seems to be caused by the following file: halmacpi.dll

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow
  the following steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is a new installation, ask your hardware manufacturer or software
  the Windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select Advanced Startup Options and then
  select Safe Mode.

  Technical information:

  STOP: 0X000000D1 (0 X 00000002, 0 X 00000000, 0X00000000, 0X00000008)

  Halmacpi.dll - address 0x834257a0 base at 83422000 DateStamp 0x4a5bbf07 0 x

  *****************************************************************************************************

  A problem has been detected and Windows has been shut down to avoid damage
  on your computer.

  The problem seems to be caused by the following file: SYMTDI. SYS

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow
  the following steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is a new installation, ask your hardware manufacturer or software
  the Windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select Advanced Startup Options and then
  select Safe Mode.

  Technical information:

  STOP: 0X000000D1 (0 X 00000002, 0 X 00000000, 0X00000000, 0X00000008)

  SYMTDI. SYS - address 0x8cf00023 base at 0x8ceef000 DateStamp 0x4ed7ca75
  ***********************************************************************************************************

  A problem has been detected and Windows has been shut down to avoid damage
  on your computer.

  The problem seems to be caused by the following file: igxpmp32.sys

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow
  the following steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is a new installation, ask your hardware manufacturer or software
  the Windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select Advanced Startup Options and then
  select Safe Mode.

  Technical information:

  STOP: 0X100000D1 (0 X 00000002, 0 X 00000008, 0XB846D160, 0XB846D160)

  igxpmp32.sys - address 0xb846d160 base at 0xb8265000 DateStamp 0x4e85e92a

  *************************************************************************************************************

  Please give us the solution to get out of this edition

  Error logs:

  https://SkyDrive.live.com/redir?RESID=B7400F7AC914BDC7! 104 & authkey =! AHh7MiYoqEYxme0

  Hello

  The Microsoft Answers community focuses on the context of use. Please join the professional community of COMPUTING in the TechNet forum below

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• Photosmart 7350 and Win 7

  I have a photosmart 7350 and Win 7 ultimate, I installed the other driver Deskjet 5550 by HP support, but still no joy. (this driver does not work on Vista)

  You can try to add a device and select windows update to search for additional drivers. After that windows update is running, you should see a set of drivers under Hewlett-Packard. In this list is a photosmart 7150. I have not tested this driver but the products look like enough to make it work.

  I would like to know if it works.

• Problems HP1315v and Win 7!

  I have a HP1315v all in one printer.  I update my PC to Win 7 (64-bit).  I can't get the current firmware to load.  Guard's fault.  The Windows Update driver loads OK but offers few features.  I tried with firewall and AV (Norton NIS 2010) turned off. Still no luck.  Printer installs fine on a Windows XP computer.  Any help?

  It of the package that I was trying to install, unfortunately didn't save one of the error codes that I sent the data to HP using the included error reports.   Here's a blurb of what I've done since my initial post.

  As someone who ALWAYS download drivers from the manufacturer of the equipment, NEVER by Microsoft.
  the scenario and the following resolution is imagine for me. However, it works.

  Scenario of
  I was upgrading my WinXP PC to Win7(64-bit) Home Premium.  I have a HP1315v AIO printer.  I have
  Downloaded the package of Win7(64-bit) of your Web site. After several failed attempts, using the information
  obtained from other locations on your website, I gave up.  I found that the Windows Update driver gave
  me basic features, such as indicted in a single page, I read on your site.  I thought I could try to use
  Pilots Win Update in combination with the AIO package.  It worked.  I had to remove all
  and try again, just to see. Still works.  The process below is what I used.

  Resolution
  1. after the failure of the software package AIO HP, unplug the USB cable as shown in the screen of the failure.
  2. disconnect from the Internet and then ensure that is set Windows Update to download the drivers.
  3 remove all entries software HP Panel > programs and features list.
  4 using the Windows Explorer, HP directories remove programs files and directories of program (x 86).
  5. remove the icon of the printer HP Control Panel > devices and printers of table.
  6 re - install reboot and USB cable.
  7. let Win 7 detect and install drivers for HP 1310.
  8. check by printing a test page.
  9. with the cable USB is still in place, install the software AIO package on top of the existing
  Windows Update driver, and then follow the prompts.
  10 test again.

  I know this isn't the best solution, but it seems to offer complete functions.  Thanks for your response anyway.

• micro latecy with the laptop hp and win 7

  I just bought a new computer hp laptop g6x I wanted to use it temporarily to record music while I rebuilt my pc studio. the laptop came with win 7 Home premium and the same problem of latency mic that everyone knows. ive tried drivers that I tried to change the binaries of reg, that I even tried to run win xp as a virtual device by vm ware, the problem is win 7 still had control of the sound card. None of the fixes in the forums have worked. I guess that I have a card his rare idt. If I can't find the fix here I was about to set up a dual boot with win xp option, I would really prefer not to make or take my new what I thought was a bad * back of laptop. I saw a few people pass this headache that I hope someone can help. Thank you

  Often, the problem is NO W7 but rather the fact that the drivers are not optimized for use in a DAW.

  If you use the edge of her then Yes, you can you expect latency - sound for games or play music. What is the round-trip latency?
  I've NEVER had latency by using a Presonus FS26/26 issues, and the drivers are good. You have poor quality drivers and independently to obtain an audio device outboard, it is not much, you can do.
  See you soon,.
  Jerry

• Hi after windows 10 almost killed my laptop and I had to restore to factory settings I tried to re - install creative cloud and get the following message "WE ENCOUNTERED THE FOLLOWING PROBLEMS: INSTALLATION FAILED TO INITIALIZE program.» PLEASE DOWNLOAD A

  Hi after windows 10 almost killed my laptop and I had to restore to factory settings I tried to re - install creative cloud and get the following message "WE ENCOUNTERED THE FOLLOWING PROBLEMS: INSTALLATION FAILED TO INITIALIZE program.» Please DOWNLOAD ADOBE SUPPORT ADVISOR TO DETECT THE PROBLEM. "then I tried to download the Advisor to support that to find it is no longer available. Accept payment until this problem is solved we know how to solve this problem?

  first of all uninstall cc on your computer.

  Run the vacuum cleaner by, http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer and reinstall the cc, Download Adobe Creative Cloud apps desktop application | CC free trial Adobe

  If that translates into the same initialization error:

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html