CS 5.5 installation disc does not load?

Similar Questions

• Photoshop 5.5 installation disc does not load

  A virus ate my office and I had to reboot Photoshop. Photoshop 5.5 installation disc does not load. Any ideas?

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download to this site or the download may not work properly.

  CS5.5: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html

• My HP C6380 shows as offline for the wireless. Win 7, disc does not load.

  My HP C6380 shows offline wireless printing but the printer tells me it is plugged on the wireless.   The installation disc does not load as my computer is Windows 7.  I was able to print with the USB cable.

  Hello

  Download and run the Windows 7 Full Feature software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-74902-1&cc=us&DLC=en&LC=en&OS=4063&product=3560280&sw_lang=

  Select Add a device, and follow the steps to reconfigure your device through the network.

  Shlomi

• 'Create a Windows 7 or a later version installation disc' does not appear as an option to select tasks

  I have a MacBook Pro (15 inch, late 2011) race El Capitan.  I just installed a new hard drive and am trying to install Windows 7 using Boot Camp Assistant.  In the window select tasks 'Create a later version or Windows 7 installation disk' does NOT appear as an option.  How to create the Setup disk?

  

  I use https://support.apple.com/en-us/HT205016 to get step by step instructions

  I have already created the disc image of the DVD install disk Windows following the instructions of https://support.apple.com/en-us/HT203909

  When I open Boot Camp Assistant I'm unable to create a Windows 7 installation disc

• The installer disc will not load?

  When I insert the installation disc in my iMac, it stays (no load) for 10-15 seconds, then auto-éjecte. The first time this happened, I assumed it was a bad drive and got a replacement. However, it happens with the replacement drive as well. I installed other software by disk successfully, recently, including an upgrade to Photoshop and does not know why the computer keeps rejecting Lightroom.

  I tried to reboot in safe boot mode and same thing.

  Any ideas how to get my computer accepts the CD so I can install the program? Thank you!

  Write the truth wrote:

  The trial version is not the full version. I know I downloaded it yesterday and it is 67MB. The full version is 198MB and I know because I planned to buy it after trying the demo version of LR 2. This was also confirmed by a salesperson at Adobe.

  Danis has it right. The trial is the full version. Try to delete the prefs file. pointers to it are in the FAQ. See resolve system errors or freezes in Photoshop Lightroom and Photoshop Lightroom 'Préférences' and ' database/catalogue'?.

  Don

• HP PSC 1315 Officejet series: the officejet HP PSC 1315 software installation disc does not start

  I'm trying to install the software for a HP PSC 1315 all-in-one officejet on an XP pc. When I put the disc in the CD/DVD drive, that it will not start. When I click on SETUP. EXE it does not start. Tried the drive in another laptop (Win10) and office (Win10) and the drive would go. I put the diskettes for installation of two other programs in the XP and two ran. I downloaded the Setup file of the Support of HP and he wouldn't either. Anyone know what is happening here?

  Hi @jonessbl,

  That will be better answered by the @Dellpeople.

  Thank you.

• Windows vista installation disc does not start.

  So I decided to wipe my hard drive and do a clean install of windows vista. It was working fine until after you have installed sp1. I restarted the computer, and there's just a black screen. I tried to launch the installation disc. He manages to pass the Microsoft corporation loading screen, the cursor appears and I can move it, but the screen remains black.

  When I reinstalled windows it says that the hard drive can fail quickly, so that he might be. If this is the case then I'll just disassemble the laptop and get a few parts.

  Hello

  If you got this message hard disk, perform a test of it.

  If it failed, you can always replace the hard drive and reinstall Vista, instead of demolition it.

  Go to the website of your computer manufacturer > search your computer specifications > know brand of hard drive > access the Hard Drive manufacturer's Web site > find and download hard drive Diagnostic software and make a record of start of it on the computer that you use to get here, following their instructions > test your hard drive to see if it has failed.

  And you can also use this method to test your hard drive:

  "SeaTools for DOS.

  http://www.Seagate.com/support/downloads/SeaTools/

  "SeaTools for BACK tutorial.

  http://knowledge.Seagate.com/articles/en_US/FAQ/201271en

  ________________________________

  And see if the hard drive tools help you.

  "7 free disk hard test Programs.

  http://pcsupport.about.com/od/toolsofthetrade/TP/tophddiag.htm

  See you soon.

• XP Service Pack 3 disc does not load

  Had a catostrophic failure I did a recovery disc integrated charge, Compaq Presario w/XP Home SP2 - Version.

  Then did a download of ms to SP3, the computer not would make since restarting windows normally screen. So I made once again, the recovery of the SP3 of Windows xp CD disc, then ordered now the computer not boot the disk automatically or if he starts using the application of programs add (not found disk), CD player works because I loaded my printer. I also downloaded the MBAM program (recommended here on this site) and then did a scan, no problems found.

  I also removed programs expired trials & unwanted excess that comes with the recovery disc just to make sure that I had enough space on the hard drive, after having the disk and defrag disk cleanup it shows 87,22 GB of free space available.

  Is there any command I can type in to help find their own program windows?

  Or am I missing another program that is necessary?

  HELP ME I'm lost, I used to just take a professional, but poverty has put, so I try it myself, your help is greatly needed and appreciated.

  THANK YOU AUTHORIZED

  Hi G.C.B,
   
  See the method mentioned below:
   
  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718
   

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Note: You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  For reference:

  Learn how to install Windows XP Service Pack 3 (SP3)

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3/

  Important: Check before you start to from the above link.

  I hope this helps.

• WPC54G installation disc does not work

  I am trying to install a wireless card WPC54G on a Compaq Evo N600C laptop with Windows 2000 Pro operating system.  When I use the boot disk, on the screen of the license agreement, the license agreement covers the button "next".  The only button that is available is the button "Cancel".  So I can't complete the installation from the CD.

  In addition, the icon of the adapter on the toolbar says "network cable is unplugged".

  Can anyone help!  I have spent hours trying to get this work and make me desperate!

  Hi MGM, the same thing happens in Windows XP, and here's how I got around him.  Go to view-> settings-> advanced and change the DPI setting of 'Big size' to 'Normal '.  After the restart before the change takes effect, the screen of the Installation Wizard will use a slightly smaller font, and then you can click on the button "Next" that is shown in the quick installation guide.

• My Photoshop Cs and Image ready Cs disc does not load on Windows 7 can get a link to allow this to happen please

  Hello. Can someone help me with this please, I got a few responses but they confused me a bit, all I need is a simple link to download a solution please ohn

  CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  .

  You MUST use the special version and the serial number on the page, not your original drive or serial number

  .

  NOTE that CS2 will not install on a "modern" with an Intel Mac

  When you install the special version of the PPro2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option

• My installation disc does not work for Photoshop Elements 5.0.

  Is there a way I can download the program using my serial number?

  You can try to find it at http://prodesigntools.com/tag/ddl , but it is likely that they do not have such a pretty old version.

• Software disc does not load using the serial number.

  Said I need to send a proof of purchase. I have it. Where should I send my proof of purchase?

  Thanks John. I could join a chat agent. It was necessary to photograph my receipt and send it. I hear within 4 days. Thanks again.

• Recovery DVD does not load

  Hi guys,.

  I use a HP Pavilion A6120N Vista. It has a SATA RAID 0 HD value.  Machine will not start. After ordering the HP Recovery Disk Set, I tried to run the program of recovery.  It displays a message that "Windows loading files...". ». When the progress bar is completed, I get a small bar (2 1/2 inch long) with a few lines on this subject moving from left to right.  Below I have the symbol of copyright and Microsoft Corporation.  But it makes no further along than that.  I put the devices to boot from first and second for the dvd player.  I tried to start with each of them the three DVDs.  I tried to start with disk 1, 30 minute wait and the withdrawal of disc 1 / insert disk two.  I tried booting with the UBCD and another bootable cd and then insert disc 1.  I tried to start with the two disc and pressing F11 I got "Disk Boot Failure, Insert System Disk and press Enter". When I replace it with two disc, I get the same results as above.  Nothing works. If anyone has any ideas, I'm open for them.

  After trying on & more, I got another result.  Without the disc in the drive, if I do not press F11 at startup, I get a choice of starting recovery or start windows normally.  These two choices lead to the small bar mentioned above with the lines moving from left to right. If I press F11, it goes straight to "Windows loading files...". "and the little bar with lines.  I chatted with HP support and they said the 800 number.  They told me that the OS is corrupted which causes the restore disc does not load.  Now, I thought that starting a CD/DVD without going through the operating system.  What's in Vista?  Can he change?  I saw as a warning to the other cd/dvd drive (dvd - rw 16 x pbds dh-16a1L) requires an update of the firmware to recognize the HP recovery discs.  I have the drive HL-DT-STdvdrrw.  Could it have the same problem and it had not just been documented?  So far, I am at a total loss.

  Thank you

  Message edited by TennBlues on 30/12/2008 21:58
  Message edited by TennBlues on 12/31/2008 12:03 AM

  AFAIK boot failure disk means one or both of the drives went bad or BIOS (F10) must be set to zero by default. So if the raid 0 Setup and a defective hard driveis then you need to get out that the hd and run recovery on the drive to work or wait until you get to another replaced.

  No, you do NOT have a corruption of the operating system, and Yes, the recovery disc bypasses the operating system on the drive. Windows Vista disk hard is not effect or prevent recovery disks because the disks will always wipe clean first the drive working.

  Try the following steps.

  (1) reboot the pc and go into F10 for installation (for vista)

  On the MAIN tab, check to make sure that your hard drives are both recognized where says 1st or 2nd disk, etc.

  It should look like WDC, SAMSUNG, ST... etc.

  (a) if it is not in the list, then check the SATA cable and power cables inside your computer to make sure it is plugged both ends properly and reconnect the cables to the two discs.

  (b) if only 1 disk is listed, then the other one may went bad on you and I would be the wrong drive breaker go back into the BIOS F10 menu and check that the right drive appears under you devices.

  I would then run a recovery disk of 1 until you replace it. In this case you will not have a raid 0 configuration more since she was only 1 player used.

  (2) try also reset the BIOS default settings by going to the menu of the BIOS F10 at startup and press F5, then press Yes then enter then F10, then Yes, then enter to restore the default BIOS settings.

  (3) after the reboot back to the BIOS menu and go right on the Startup tab and choose boot DEVICE PRIORITY and set the 1st boot device to the Group of HARD drive, then save the changes and exit the BIOS.

  If you want that you set the CDROM boot first yo group.

  You can also turn on the pc and press ESC to boot from the hard drive or a disk drive group.

  I recommend first resetting the default BIOS settings and check the devices first, before opening the pc.

  Message edited by c0rnel on 12/31/2008 01:42

• You will need to re - install Creative Suite 5 to my computer after my laptop crashed. But the disc does not work.

  Hi all

  Please help me!

  My Creative Suite 5 installation disc does not work. What can I do?

  RD

  If you follow the 7 steps, you can dl a trial through one of the links on this page: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

  and activate it with your serial number.

  If you have a problem with dl, you don't follow all 7 steps.  as a general rule, do not carefully follow the steps 1, 2 or 3 is the problem.

• Windows 7 does not load Installation disc.

  I have an ASUS K50IJ running windows 7 Home Premium. It was purchased second hand. He began to have problems loading windows, but in a first time would allow me to boot into safe mode, but this is not the case now.

  I got a disc to install windows 7 in the hope of justrepairing the windows operating system, but the problem is, even after changing the order in BIOS and advanced boot menu, the disc does not like its supposed to, instead gooing, to the extent where the windows loading screen, then a black with a cursor screen...

  P.S., wont even startup repair charge.

  I need this laptop to load windows, so I can use it because it's my phone business.

  Help, please.

  You should consider performing a recovery.

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Asus, press F9, as soon as you see the Asus logo.