my DVD burner program disappeared.

Similar Questions

• HP pavilion dv6 - product a1m22av dvd burner program

  Hi I just got this Hp pavilion dv6 - a1m22av produced by a friend of mine as a giift and I was wondering which program works best for the dvd burner, it seems that it came with the recovery disk. Any suggestions?

  Hello

  Please try to create a set for yourself (I hope that your friend has not removed this tool):

  http://support.HP.com/us-en/document/c01867124

  Many around, pay for burning software, free of charge. Please read the following article and select a product that is suited to your needs.

  http://www.techsupportalert.com/best-free-CD-DVD-burning-software.htm

  Kind regards.

• CS3 and dvd burner program

  Hello

  I just uninstall Roxio DVD burner software because of its Media Manager and other features with the CS3 interference.

  Anyone know of a free DVD burner - I just need the DATA DISK function to save the files on a DVD... that I can use with CS3 and it is not hang all sorts of stuff crazy re: media?  Or... a program relatively little expensive would be OK, but I'm struggling a little $$ wise, so less is more.

  Stem

  Prejudice,

  I too have Nero beautifully alongside a bunch of Adobe programs. However, I am only a custom installation, omitting InCD and all observers and the "sniffers". Nero is not 'bad', but at least with the default value of old plant would load a whole bunch of modules that get in the way as well as sap valuable resources. As an aside, Nero seems easier to "clean," that Roxio, which seems to run tentacles everywhere. Once it is fully installed, it takes a presser foot or a reformat - or so it seems.

  If I have some Nero, I usually just go with ImgBurn, be it for a DVD-video or DVD-data.

  Hunt

• Half frame of slide shows - DVD burning slide

  I created a slide show in Photoshop Elements 10.  I then clicked on exit to begin the process of creating a DVD.  When the show transferred to first Elements 10, only the lower part half each frame dia appeared and thus produced a slide show DVD with only the bottom half of the frame.  I then tried to burn a new DVD of slide show that I had burned successfully on a previous occasion.  By clicking again on the production and following the menu, I had the half frame again when I arrived for the DVD burning program in first Elements 10.  Can someone give a help?

  Here's that ANNOUNCEMENT:

  ANNOUNCEMENT: Windows Update is display be blackened

  MicroSoft has released an update for Windows, which poses problems with screens. What follows is of Talbot McInnis, who has been tracking this problem and offers a solution:

  "MS technology MS13-057.  Specifically, on kb2834904 XP and windows 7 kb2803821 is causing a problem

  .

  For us, it happens when the decoding of WMV9 files.  Not all uses of decoding WMV are affected, but I have confirmed that when linking the WMV decode DLL to a sample for RGB32 video grabber, executives are black on top, so that points directly to the internal data of the dll to decode WMV decoding.

  You can uninstall these windows updates to fix your problem. »

  There are several discussions on the issue that this update is initially on the pre and PrPro Forums, so we can get more details. So far, there is not another hotfix of MS or Adobe.

  Also, check out this Adobe Article: http://helpx.adobe.com/premiere-pro/kb/wmv-files-corrupted-import-or.h tml

  Adobe reported that MS is approaching a new update, but not yet the release time.

  Good luck

  Hunt

• Does not have Lenovo Slim USB Portable DVD burner DVD or programs

  Hi everyone, yesterday I bought a new Lenovo Y50, but when I tried to launch a video game he acted as if there were no disc inside the dvd recorder.

  The strange thing is that it turns CDs without problem, but no dvd or programs.

  I just bought, so there is no possibility that my pc is affected by viruses or other issues don't related.

  Can someone help me?

  Is this just a problem about me being not not good for the pc, should I make a process specific or is - a problem the burner dvd itself?

  Thank you.

  Thank you for your answer, but I solved this problem.

  I went back to the seller, we tested it and the result is that it is broken.

  They gave me a new, and now it works correctly.

  Thank you once again.

• Satellite P35-S609: DVD burner Mat * one disappeared UJ-820 s

  I bought a P35-S609 end 2004. The DVD burner was dead on arrival. I brought back to the seller, and they exchanged the laptop.

  The dvd burner worked for the first two years and then he started to disappear and reappear, leaving events in the journal system such as pasted below. A few months ago, he has disappeared and I have not seen since. Help!

  THX,
  JD

  In the system event log:

  Event type: error
  Event source: PlugPlayManager
  Event category: no
  Event ID: 12
  Date: 26/02/2007
  Time: 05:04:26
  User: n/a
  Computer: BACK2OZ
  Description:
  The device "MAT * a DVD-RAM UJ-820 s '."

  (IDE\CdRomMAT***A_DVD-RAM_UJ-820S___1.50___\5&1cd2b8a9&0&0.0.0) disappeared from the system without first be prepared for removal.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Hello

  Everything looks like a hardware malfunction.
  But what exactly do you mean by disappear? The drive is not listed in the my computer zone, or he can simply read and write media?

  However, after 2 years of work it s not unusual that the player will start malfunctioning I guess that the lens of the drive can read and write the CD or the DVD.
  So I agree with Marina4000 and it s time for a new

• Not found DVD Maker "DVD burner" message when DVD writer works well with other programs

  Hello

  I just created a DVD with AVS Video Converter and burned a DVD with no problems and created later a film with Windown Movie Maker, which worked well, it has exported to Windows DVD Maker, again not a problem, but when I click on burn, I get a not found message "DVD burner". How can I fix, I know the burner works very well because it works with other programs... And Windows DVD Maker was working fine until recently and outside a updated Windows Vista, I did not further updated or changes to the computer.

  Thanks for your help!

  Hi Froggie_UK,

  Since this problem you encounter began after that windows update, you can use the System Restore tool to return your computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Before you start Please back up your data

  To restore the operating system to an earlier point in time, follow these steps:

  ·         Click Start, type System Restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  ·         In the System Restore dialog box, click choose a different restore point, and then click on Next.

  ·         In the list of restore points, click a restore point created before you started having the problem, and then click Next.

  ·         Click Finish.

  ·         The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  If it is an update, the best way to solve this problem is to apply only updates one at a time to determine which updates is causing this problem.

  Click on start-> all programs-> Windows Update, click on change settings in the left menu. Select download updates but let me choose whether to install them, click OK. When you are alerted to install a new update, in this window, click updates see, uncheck all updates and select one at a time, install it, restart your computer, test and update. Once you find the update either continue to ignore it, or look for it at http://support.microsoft.com/.

  We hope this resolves the issue and look forward to hearing back from you on your results.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• It apears that ROXIO CD and DVD copy program is part of the Vista program when I got it. After my computer crashed it seems to have disappeared. It worked like a charm, how do I get it back?

  It seems that ROXIO CD and DVD copy program is part of the Vista program that came with the computer. After that the computer crashed it disappeared. It can be recovered?

  Roxio CD and DVD is NOT a part of Vista, but it may have come with other software on your PC from the manufacturer.  When you crashed, how are you on the recovery?  Did you do a clean reinstall?  Did you use a recovery disk provided by the manufacturer or a recovery Partition created by the manufacturer, or have you used a Vista disk?

  If you used disks of recovery or a recovery of the manufacturer Partition, then you need to discuss with them because they produce these discs - not Microsoft (and they may be able to solve the problem or refer you to a site where you can download the program or email the file to you or something - or send you the replacement of the recovery with the software on this disc so always available - possibly for one) small fee).  If you used a Microsoft disc, then this program is not on the disc and why he is not installed more.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can I use any disc burning program to create DVDs from en "DVD folder"?

  I wonder if I create a DVD folder in yet that I can then use it outside of Adobe applications and burn to disc.

  When I create my final product in still, it shows me the possibility of my output as a "DVD folder" project instead of maybe a "DVD" where he would have been burned immediately. I want my project to be transferred to a person who can produce discs in bulk and/or so that I can burn with, say Windows DVD maker. What is the way to do it?

  what you want to do is to select "DVD image!

  This will create one. ISO file (disk image) which can be burned to disc

  using any number of programs still including DVD burning!

  

  HAHAHAHAHAHAHAHAHAHAHA!

• can "access my d (dvd burner) drive.

  I'm trying to burn a copy of the basketball season of my son just finished editing using pinnacle studio 11.  The first one worked fine, but now my d guard drive disappears when I try to insert a dvd.  When I go to computer it shows all my drives, including my drive d which is my dvd burner and player player, but when I opened the door of dvd insert a dvd disappears from the icon of the drive in the computer and my computer tells me that it cannot detect a dvd.   I use vista and if I restart my computer the d drive reappears until I opened the door and I can't make it back unless I restart my computer.  Thank you

  Hello

  I would first try. Maybe a little simple thing.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Here are one couple of others if it does not work.

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Hope it gets you'll soon Mark <> Microsoft Partner

• Creating Windows DVD - can not detect the DVD burner.

  When I start Windows DVD Maker, my DVD drive on my Lenovo 64 bits Y460 can not be detected. When I click the selector drop down menu on the upper right corner drive, a blank is displayed. When I try to burn, the program says that a DVD burner can not be found, sign in, and then install etc... How can I fix it?

  You have a 3G modem or another attached flash drive? My Huawei modem was somehow interfering with Windows Media Center/DVD Maker detect my DVD burner. As soon as I unplugged the problem disappeared. If I reconnected it during the burn process, it does not immediately!

• Windows DVD Maker says "Not found DVD burner"?

  This is my first time doing a DVD, so I don't know what is happening. Initially, when I first add a video, I used to have a DVD burner in the menu bar, saying 'E' and I tried to make the video, but I think that it stopped working after 99% (I was out, so I don't know) and it ejected the DVD with nothing on it and began to say that there is a burner? The 'E' has disappeared. I don't know what happened to him what DVD writer am I supposed to have? Is it free?

  And I don't know much about computers (I wanted just to burn a video of me and my friends on a DVD) so please explain so I can understand :)
  Thank you!

  Hello

  Method 1:

  Check the link and see if it helps:

  Burn a DVD-video using Windows DVD Maker disc

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

  Method 2:

  Check the link and see if it helps:

  Solve problems with creating a DVD-video using Windows DVD creation

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Method 3:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Check the link and try to run the Troubleshooter:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

• Portege A100 - problems recognizing a new DVD burner

  Hello

  I'm looking to replace the Panasonic/Matsu * player UJDA750 combo with a LiteOn SOSW - 852S DVD burner. The LiteOn is CSEL and is not recognized by the Portege A100. I tried to change the master/slave/CSEL and Inverse CSEL using E2MS_WIN_SOSW - 852 S .exe (in an Acer Travelmate 220, which sees all configurations), but the Portege A100 still does not recognize LiteOn.

  I ran IDEDIAG using a WinME boot CD and the Matsu * a Combo drive in Portege reports as secondary master. So, I tried flashing the drive LiteOn (using the Acer Travelmate platform) with MTKFlash version 183 c using the a command? "mtkflash 3 w/b PRS9.bin" (using the original firmware of saved), '3' to change the drive to the secondary master. I came across problems here - the flash appears to hang. The drive is always ok, however. I flashed it back to the original ok CSEL using E2MS program in Acer.

  I have not tried bridging the pins 45 to 47 on the LiteOn - I thought maybe it was a last resort.
  -Can help you with the correct configuration for a CD/DVD drive in the Portege A100? There are a bunch of different ones - primary, secondary, tertiary, Quarternary master/slave and CSEL and Inverse CSEL. Portege A100 'sees' the Matsu * a CDROM model CR-176_B of Acer.

  Or - can you recommend me a DVD burner for this laptop?

  Hello

  The evolution of the master/slave/c-salt settings is not recommended and tell the truth I put t know if its possible. I presume that it of not possible to Flash these settings on medium power.
  In my opinion it doesn't make any sense to do.
  This procedure may damage the drive. Maybe you will not be able to use this drive more and more you will void the warranty!

  I think it s better to buy a compatible device and supported as trying to drive not compatible flash.

  Did you check your user manual? Usually the user manual should provide information on compatible CD/DVD players and supported.

  Good bye

• Portege R700 - slow DVD burning

  all of a sudden for some reason any CD/DVD burn on my new Portege R700 has almost ground to stop. It worked fine initially, but now won't have high peaks of 1 MB/sec... it is a REAL pain...

  The problem occurs with both the DVD player built-in and a USB connected drive that has worked well for years, so there must be a problem with o/s or H/S any. am about to update the BIOS but with no real hope

  I did some research on Google and things seem to point to the IDE controller issues. I took some advice and remove / reinstall the controller, but to no avail...

  someone else has the same problem - or, more importantly, a solution please?

  in some desparation

  Tim

  Hello

  not easy to say why it is burning so slow. have you tried burning with other discs and programs?

• Satellite 5100-201 a LG GSA 5120D external (Firewire) - DVD burner

  Material:
  Satellite 5100-201
  LG GSA5120D-connected via Firewire external DVD burner

  Software
  Windows XP SP2

  Problem:
  Windows is instability, often blue screen:
  IRQ_NOT_LESS_OR_Equal or other

  by stop Windows always shut down (Halt)

  Help me.

  Hi Victor,

  on the utility Cd & Toshiba tools is a program called «Register of IRQ routing V1.0»

  Maybe a reinstall might fix the problem!

  To bye chris