Satellite A60 can't read CDs and DVDs serious

Hello
I have a problem with my carpet * a UJ 820: it reads not burnt, CD or DVD, one real cd/dvd. I cleaned the lens with no improvement.

Help me please!

You are able to use the STRANGE for CD and DVD burning? Have you tested with different data, burned onto CD/DVD or you have this problem with specific data such as movies or music?

Tags: Toshiba

Similar Questions

  • Satellite A60 no longer burn CDs and DVDs

    Hey, somebody help me.
    My A60 laptop no longer burned CDs and DVDs.
    There do not seem to read empty discs.
    Some regular she reads, but will not start and some, it will not
    not even start.

    Hello

    Sounds like a damaged disk device.
    Usual that these problems occur if the lens of the player is unable to calibrate correctly.
    In my opinion it has not much to do. I don't think that the replacement of the drive will solve such a problem.
    As the authorized service partner Toshiba for a reader compatible and taken in charge.

  • Cannot read CDs and DVDs on satellite C660

    Hello

    I bought my PC laptop Toshiba Satellite C660 in December 2010.

    I was not able to play any CD or DVD.

    I checked on the properties of Media Player and found that the driver had been disabled.

    I know not how get the laptop to read CDs and DVDs, does anyone know how or why this happened? Is - this rare?

    Thank you

    Natsophia

    I do understand that with the driver disabled.
    Optical drive is listed in Windows Explorer?

    If you can't find it listed in the Device Manager and if it is in the unknown device list try this please:
    http://APS2.toshiba-tro.de/KB0/FAQ8101LA0000R01.htm

    It is described as a Vista but there the same should be under Win7. Please try it and send feedback.

  • Windows media player cannot read CDs and DVDs

    MS supports says my Player DVD is dead and needs a new drive. So, I just install a new ROM DVD and still have the same problem - cannot read CDs and DVDs.

    When I play the CD, I always get the error meessage--(lecteur Windows media a rencontré une erreur lors de la lecture de lecteur de CD en mode numérique...). 'Digital' is selected under the tool-> properties-> device.

    When I play DVD, it is frozen my laptop or keep spinning and froze the Windows Explorer and the reader.

    I was able to read DVDs and CDs once after a few restart. During playback of CD the WMP abruptly stopped with error message and since that time cannot play CD DVD & more.

    So far, I did a few fixs that I found online and nothing wroks:

    * No upperfilter or UpperFilter registry

    * Uninstall and let the laptop automatically reinstall the driver

    * Ms. Fix it gives different results every time I run the fix-(1) detects no problem and therefore no patches have been applied (2) the main media in the CD drive is not readable (same CD has played correctly when using external USB DVD rom)

    Can someone help and let me know what that could be the problem and how to fix it! Thank you!

    Hi Amy,

    You can read the following article to clear the Windows Media Player database and check if it helps.

    You cannot view, add, or delete items in the library of Windows Media Player 11

    If you have any third-party media player installed on the system, then check if the DVD player works with it.

  • Satellite A50 543 reads CDs and DVDs sporadically

    I have a problem with my DVD-ROM in my laptop. It only reads CD and DVD sporadically. But most of the time that I dwell in a DVD and it try the bed. But after a few seconds it stops and the DVD - ROM led lights constantly.

    My question is, can I get a new DVD-ROM? Or I have to send it back to Toshiba?

    Sorry, my English is not the best ;)

    Hello

    For me, this looks like a disk failure. After repeatedly the lens can not calibrate properly and so sometimes s not possible to read, burn with different media.
    You should know that internal portable players using different parameters like master/slave or c - salt. These parameters is not editable as on drives for desktop PC.
    Therefore, it is very important that you will use and bye a compatible.

    If you want to know which drive will work on your laptop, so I recommend asking the Toshiba service partner for details.

  • That's what I get as my CR - ROM status and I can'r read CDs or DVDs again... Can someone help me please?

    No available drive
    Description CD-ROM drive
    Loaded media no.
    UNKNOWN media type
    Name of the Oxtiazc (D ^ D (R_ ID - 7 = 68 a (ATA Device)
    Manufacturer (Standard CD-ROM drives)
    State error
    Transfer rates 307.13 KB/sec
    SCSI target ID is not available
    IDE\CDROMOXTIAZC PNP device ID (_D ^ D (R__ID - 7 = 68 a (___DH18___\5&2A7BAA5D&0&0.0.0)

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps and happy holidays!

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Satellite A100-788 cannot read CD and DVD RW

    Hello
    I just bought a Satellite A100-788 and can not read the CD and DVD RW (DVD I tried is a Sony) with the CARPET * a DVD-RAM UJ - 841S.

    I have downloaded the driver (v 5.0.2.5) on the Toshiba site, and tried to install it but it did not work (result is ok, but it's the previous version when I look at the properties: Microsoft 5.1.2535.0, 07/01/2001). Installation of this driver will fix my problem, or, as I read on the forums, I'm going to nead to install a new firmware version?

    Anyone know what to do exactly?
    Thank you
    Stéphane

    Have you tested different brands of CD and DVD?
    As you may know the discs don't support all types of CD or DVD.
    In my manual, I found a hint of support of the CD and the DVD.
    This media must be tested and are compatible.

    You check the manual for this list

  • Satellite A60: Can I install Vista and where to find the drivers

    Hello

    I have a SATELLITE A60: pentium 4 HT 3 GHz, 512 MB RAM, disk HARD 40 GB, LAN/WAN/WIDI, irda,.

    I want to know if I could install windows Vista Ultimate Edition, and where can I find appropriate devices for Windows Vista drivers.

    Thank you

    Hello

    Of course, you can install Vista on your laptop. I installed Vista on my old A50 and it works. OK, I m not able to use the extra features such as Aero for example but the operating system is running.

    The driver is a bit tricky simply said, there are no Vista drivers published, I found a few singles Vista drivers on some sites of s manufacturer of device but at the moment, there is no drivers for this laptop Toshiba.

    PS: on the site of Toshiba Canada, I found the only drivers for some new laptops Toshiba:
    http://209.167.114.38/support/download/ln_byModel.asp

  • Equium A100-338: CD/DVD player does not read CDs and DVDs

    Hello

    ITS BEEN 2 DAYS SINCE MY CD/DVD DRIVE WILL NOT READ ANYTHING MORE?

    I UNINSTALLED THE DRIVER AND RESTARTED THE LAPTOP, SO HE HAS REINSTALLED THE DRIVER AGAIN, BUT IT STILL DOES NOT WORK.
    IVE ALSO TRIED TO GENTLY CLEAN THE LENS BUT THAT DOESN'T WORK EITHER.

    WHEN I PUT A CD OR DVD IN THE DRIVE IT SEEMS TO READ, RE-READ AND RE-READ UNTIL HE GIVES UP AND A LIGHT ORANGE REMAINS LIT ON THE CD/DVD DRIVE ITSELF?

    PLEASE CAN SOMEONE HELP!

    Hello

    Please put a recovery media delivered on ODD, start your laptop and press the F12 key. Choose the CD/DVD as first boot device and check if the recovery procedure starts correctly.

    Please publish results.

  • Satellite L30: reader will not read CDs or DVDs

    In the evening, I was recently testing on various operating systems on my laptop and eventually decided to return to Windows Pro.
    It was working fine until a couple of days, but then the hard drive started making a rattling noise, like R/RW head stuck.

    Now it will not read CDs or DVDs, can someone please help and tell me if it's a failure of the software or hardware, and the best way to fix it?

    Hello

    The drive problems are not uncommon and may still occur.
    For the most part the purpose of calibration training does not work correctly.
    The objective must be calibrated in the correct position until the player will read or write to the media.
    This fault is not reperable and especially the drive needs to be replaced!

  • Satellite L670 - CDs and DVDs do not work smoothly

    Hello!

    I recently bought a Satellite L670 and there is a problem with the DVD player: CDs and DVDs do not work smoothly, there is a lot of audio and video clippings.
    I uninstalled the driver for DVD drive and reboot the laptop, but it has not solved the problem.

    Could someone help me with this?

    Greetings from France!

    With cups, you mean peak and its gel for a second, right?

  • Satellite M70-173 - cannot burn CDs or DVDs

    Hello

    I have an old but expensive laptop (Satellite M70-173). The CD/DVD drive is a carpet * a UJ - 841 s and can currently only read DVDs and CDs
    I have Nero installed 8.3.7.1, but it does not allow me to burn any DVD or CD
    I have all the updates that are installed for Nero, have also removed the "upper and lower limits" in the registry.

    It is not a mark of DVD or CD that I have not yet tried, but they all are coasters.

    I have the following options:

    1. try to set the drive - either with the technical assistance of the forum or replace the disk, so I decided that it is a hardware error

    2 buy a new laptop - but also like some advise on how to "clone" of the current notebook that I have so many other programs installed that I bought over the years and do not want to lose.

    I made copies pdf of burning errors I can post if necessary.

    Any help is welcome

    Kind regards
    Juan

    Hello!

    > I made copies pdf errors burning I can post if necessary.
    Yes, I think it's a good idea. ;)
    Otherwise it of a bit difficult to help you.

    But what CDs and DVDs you tried to burn? I have good experiences with Verbatim and TDK. Check it!
    And you should burn on a lower speed for CD e. g. 16 x.

    Good bye

  • Satellite L30-113 - cannot burn CDs or DVDs

    I have a Satellite L30-113. Recently my driver failed for my dvd player, until I was able to install a few things and burn CDs and DVDs. Now, I can't record CDs or DVDs.

    Nero and CDBurnerXP for CD/DVD ROM say 'cannot continue burning process as you did not choose the device for recording. CD/DVD ROM propities shows that it does not support recording CDs and DVDs.

    I uninstalled the driver and restarted my computer and it reinstalled the same as that which does not once again. I am a driver update search and xp tells me that the driver is up-to-date. I checked the Toshiba updates with none of these updates for CD/DVD ROM.
    I have no idea on how to fix this unit "corrupted".

    Hi mate,

    I had a similar problem on my Toshiba laptop. So here, I searched a little bin forum and I founded to delete upper and lower filters in the registry. I followed the instructions in this Microsoft article:
    http://support.Microsoft.com/kb/314060

    After that, I again was able to burn DVDs.

    In addition, updated driver from CD/DVD isn't necessary because this driver is part of the operating system.

  • Satellite A40-231: cannot burn CDs or DVDs

    Hello

    I can play CDs without problem, but I can't write them and DVD. I tried with Windows XP default recorder (by Roxio as he said), Nero and Infra Recorder but still had the same problem. Combustion process begins and finishes without errors with all of this software, but when I check the contents of the CD later, I see that nothing is written there, the CD is just considered as empty, or sometimes seen with 0 MB of available space, 0 MB total space.

    I tried with the CD - r, CD - RW and the DVD but I got the same problem. I have 2 389 MB free in my disk space hard as he is seen by Nero for the ability of the temporary folder that it uses.

    My DVD-R /-RW is recognized by Windows XP without problem and also, I installed the latest firmware from the site Web of Toshiba.

    Here are my specifications:

    Toshiba Satellite A40-231
    Toshiba DVD - ROM SD-R6112 DVD-R /-RW DRIVE Firmware Version: 1333 (latest news on the site Web of Toshiba Driver)
    System dual boot: Windows XP SP2 and Linux Debian Sarge

    Hello

    In the manual of Toshiba, you compatible o is a list and supported the CDs and DVDs.
    You must use these mediums as they are tested and should work correctly.

    Another tip:
    Go to start > run > and start recording with a command regedit

    Delete values
    upperFilter and UpperFilter of this key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    I've done on my laptop and noticed some improvements

  • Toshiba 8 X DVD (SD-C2402) does not read CDs or DVDs

    Inspiron 7500 Toshiba 8 X DVD (SD-C2402) Combo drive DVD - floppy drive

    Do not read CDs or DVDs (floppy drive works fine)

    Driver is loaded and peripheral bed system works properly.

    Not to load firmware update Tosh1009 I downloaded from the Dell support site.

    Can you suggest a way to test if the disk is good?

    How can I reformat without being able to load from Win2000 CD?

    Help!

    Bulldawgtom


Maybe you are looking for