CS4 - magnify or tool of the Zoom lens?

Similar Questions

• The zoom lens compatibility

  I have an EOS REBEL G and want to know if a vivitar 75-205 macro zoom lens 22005946 No. is going to work on it.

  If you are looking at a manual focus zoom Vivitar 75-205mm F3. 8 - f4.8... This was done for the old Canon FD lens mount used on FTb, AE-1, a-1, F-1, etc. of the cameras... Serial number #22xxxxxxx you mention strongly suggests he is a FD lens, made by Kiron for Vivitar. If this is the case, it's probably a very nice lens, but...

  No, which cannot be used on any EOS camera (film or digital). These all use the modern EF mount.

  I did a search and did not find any Vivitar 75-205mm in the modern mount. So I think that what you're watching is the old FD mount and the answer is 'no' (this is probably why it's so cheap).

  EDIT: there is a 75-300mm lens Canon EF that sells expensive and will work on a g of rebels. It is not the best lens optically or for general performance, but it is one of the lowest cost since this seems to be your biggest concern. This can be purchased for as little as $115 (http://www.amazon.com/Canon-EF-III-Telephoto-Packaging/dp/B00GEE8I1Y/ref=sr_1_4?ie=UTF8&qid=13910997...). You might be able to find it for less used.

  ***********
  Alan Myers

  San Jose, California, USA.
  «Market softly and carry a great lens.»
  MATERIAL: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
  FLICKR & REPROGRAPHY

• DIFFICULTY zoom mode Prototype - add in the zoom tool

  Hello

  As much as I love XD and don't mind the switch between mode creation of prototyping <>, useful and used tools like the zoom must be more prototyping mode

  Its a complete question UX is not not able to zoom accurately in prototyping mode. You are often zoom in tasks of forms / vile transparent to connect interactions.

  There is not enough good remove tool expected and common, especially consider that your users are more likely of arising from the use of drawing apps like sketch or the Adobe range, where 'Z' to bring out the zoom tool is next with 'space' to move the canvas also constantly used tools.

  Correct this glaring problem. Sorry no mood polite, always had problems with Adobe kill the best vector drawing App never Freehand... lol... RIP.

  See you soon

  Elliot Rock

  Good news!  You pouvez use the Zoom tool in Prototype mode right now, even if it is not in the toolbar - hold space, then press on and hold cmd.  As long as you hold these keys down, Zoom mode will be active.  (This tip works in design mode too!  (And most other applications Adobe.)

  Note: If you have just upgraded to 10.12, the new keyboard shortcut to OS nationally for Siri will interfere with that.  We are working on another shortcut to work around this problem, but in the meantime, you can change the system preferences to disable Siri or switch to another global shortcut.

  Hope that helps!

• Impossible to use the Zoom tool to fix the magnification sizes different from those predefined pages

  Hi, I am trying to use the Zoom tool and 'Set the magnification' on my Dreamweaver CS5.5 to view my pages at different magnifications when you work on it.  My problem is that I need to use sizes other than these sizes available in the magnification level list predefined (for example, which are 100%, 150% or 200%).  These are those that arise in the context menu of zoom.  The dreamweaver tutorial says I need to type in the size, I want (for example 115 or 130%) in the 'text zoom' box and it will then apply that the size of the page, but the box won't let me edit any size is currently in it.  I can't replace or delete any predefined size is in the box or do something to change the zoom preset levels! I would really appreciate help with this thank you

  I just tested it in Dreamweaver CS5.5 on Windows and Mac. You can change the value in the text box Zoom on a Mac only. It does not work on Windows (don't know why).

  The only solution I can suggest is to use the tool magnifying glass to drag around the part of the page that you want to review.

  For what it's worth, the Zoom text box so the Magnifier tool has been removed from the CC of Dreamweaver. You now zoom in/zoom out as on a browser using keyboard shortcuts (Ctrl / Cmd + and Ctrl-/ Cmd-).

• How can I increase the size of the address bar? When I use the zoom of the icon of the tool, it only increases the size of the screen below the address bar.

  It is difficult to read the address bar in Explorer.  How can I increase the size of the address bar?  When I use the zoom tools icon it only increased the size of the screen below.

  You talk about the size of the text of the elements of windows.

  But the question was about the SIZE OF the INTERNET EXPLORER ADDRESS BAR SIZE.

  It is very difficult to use the address bar now when it 12-15% of the width of the IE.

  To change the TI: right - click on the bar next to the tabs. the drop - down menu select "show tabs on a separate line.

  That's what concerned, imho.

• AE 2015.3 Crash when the Zoom on great Composition tool

  CENTRAL PROCESSING UNIT

  

  GPU

  

  
  All purged hides in AE and preferences.

  first I thought it was the auto-save, but after having canceled it it happens again.

  steps to reproduce the problem:

  1. create a composition of 10000 x 1080

  2. take the zoom tool and click once on the compose window

  3. get crazy

  And voila - here is my registration form:

  

  before I post a bug report for the people at Adobe, thought I have here to see if any of you had this problem or can be recreated. I want to use this version, but for now, I'll use 13.7.1.

  This problem seems to have been fixed in 13.8.1

• I installed photoshop CS4 on a new PC with the original CD. Camera Raw does not show the 'Snapshots' tool and the tool "setting of the target". Thanks for your help!

  I installed photoshop CS4 on a new PC with the original CD.

  Camera Raw does not show the 'Snapshots' tool and the tool "setting of the target".

  Thanks for your help!

  

  As you can see, you are using version 5.0, who can't stand still not instant in it.

  Please check for updates in Photoshop > help.

  Concerning

  Sarika

• How to "convert it" for MS Word or Excel on the right side as it allows to be? It is hard to find, and why you buried the zoom tool?

  The new update is already a PITA. I paid to be able to convert PDFs to Excel or MS Word and allows it to be on the right side of the pdf document. The only way I found was to go to the Adobe online. There must be a way faster and more convenient to convert. Then, I use a lot the zooming in and out tool. How do we get this tool on the Ribbon? With the upgrade, I have to go to the view tab, and then click the zoom tool. I found a dynamic zoom and it's good, but I wish the zoom on the Ribbon for quick access.

  Hey yvette58,

  Could have closed the tool on the right side pane. Please press (SHIFT + F4) to get that back.

  In addition, you can right click on the toolbar to add zoom tools there.

  

  Let me know how it goes.

  Kind regards

  Ana Maria

• Photoshop CS4.  When I use the marquee selection tool, I lose the moving dotted line as soon as I take my finger on the mouse!  Help.

  Why my Rectangle selection tool outline does not disappear when I release the mouse button?  This just started happening.

  Research has done is you turn off your GPU (Preferences > Performance) .He often solves the problem with CS4. If this is the case, you might consider an update of it.

• I can't set my ZOOM tool. He continues to do the zoom SCRUMMY. Or whatever his name. Where is the sign of the Zoom tool preferences?

  I can't set my ZOOM tool. He continues to do the zoom SCRUMMY. Or whatever his name. Where is the sign of the Zoom tool preferences?

  In preferences > performance GPU > Zoom animation

• CS4 crashes when I send to print and pen tool loses the ability to maintain a multi striped line attributes.

  With the help of Illustrator CS4 (impossible to pass because the office that I contracted does not level) on a Mac under the Mavericks 10.9.5 (just upgraded to 10.6). CS4 crashes when I send to print (I was save as PDF and print only). In addition, the pen tool loses the ability to maintain a multi striped line attributes.

  For the second, deselect new Art has basic appearance in appearance (small triangle in the upper-right) Panel dialog box. With regard to the other you tried to delete and time the printer to your list of printers? In addition, since nothing sooner than CS6 has been tested with 10.9.x, the PDF method can be your only hope.

• When I use a tool on a zoomed image, the image freezes and I can't move unless I have change tools. I tried to reset the tools and uninstalling and reloading CC. What should I do?

  When I use a tool on a zoomed image, the image freezes and I can't move unless I have change tools. I tried to reset the tools and uninstalling and reloading CC. What should I do?  Once that any tool I can't change its size or move the image.

  Howdy,

  Sorry for the lack of information. It's Adobe Photoshop CC, I have been using

  CS5 and am going to try the demo version of CC to see if it's worth to change

  To no matter what tool works once, but freezes the movement tool design and image.

  I am also using the beta version of Mac Yosemite. But the CS5 version is

  works very well.

  Hasta,

  Bob McCaw

• Control how the zoom tool

  How can I change the way my zoom function work? I recently updated my Windows 8 operating system. With the zoom tool selected, I used to be able to click and drag to the right to zoom, click and drag to the left to zoom out. Currently, I pre-select which direction of the zoom I want to use. Please notify.

  Unfortunately, windows 8 has problems with the graphics cards and photoshop.

  (graphics cards in general, not only with photoshop)

  What kind of graphics card do you have?

  Have you installed the latest updates for your graphics card in the machine, that is to say Nvidia or AMD Radeon?

  (not through windows as these drivers are generally obsolete)

  Could you post the news of help > System Info in photoshop?

  Your is grayed out, which could be the drivers or something else:

  

• noise of the film / lens flare in cs4?

  Hello

  There are years that I used to use the first 6 - real old school!

  He had a great effect, listed in the Quick Time folder in video effects, which allowed you to add noise (random scratches) film and lens flare so that your movie looked like it had been fired on an old super 8 or something similar.

  Now I have CS4, but impossible to find the same effect in there. Surely, it is possible to do it--they can't LOST influence the development all these years?

  Any ideas greatly appreciated!

  see you soon

  Looking at my version XP of WMM (not Live latest version), I see Film, Old Age, Older and older, more Film Grain. Everything could be useful.

  There are also the fixed effect of Keyframe > opacity to get 'twinkle '. If the 'flicker' go lighter, then just put a cover of color (white) on the images on the video Track 2 and 1 video track, then apply these effects of opacity for retouching.

  If you consider "aging" in Pr 6.0, you might want to look into doing an export from CS4 and work on that. Something as DV - AVI Type II should be fine, but perhaps even using Lagarith Lossless CODEC (if Pr 6.0 supports, and I think it will), then Pr 6.0 export to Lagarith.

  If you use WMM, you do similar, but I doubt that it will address Lagarith Lossless CODEC (might want to experience) and then export as Type DV - AVI, I. This file should import into CS4 fine, although it is slightly different from the DV - AVI Type II. A possible problem might be the video and the Audio goes OSS (Out Of Sync), but when this happens, it is usually static OOS OOS dynamics and not, so it's easy to fix. Another workflow would be to export as Type DV - AVI I and use a conversion program (many of those who are free, like Prism) to convert to DV - AVI Type II.

  One consideration is that since the ultimate quality is not what you want, don't even worry about something as Lagarith Lossless, as slightly more degradation might actually help you reach your goal - old Film.

  Good luck

  Hunt

  PS - in addition, the effect > Strobe might be useful?

• How can I configure the keyboard shortcut for the zoom tool to be r-click of the mouse?

  I want to have the right click of my mouse to be the zoom tool in Quark Xpress. Can I make the Z shortcut to choose the Zoom tool instead right click? I know how to enter keyboard shortcuts - don't know what to type for the new shortcut to do a right click. now its 2 steps to zoom rather than in quark 1. not that I want to go back. Laughing out loud.

  In addition, while talking about the differences in migration and additional measures, is there a way I can hide guides and overview of overprinting of the value in a single step? (this is something I often do and was just a simple F7 in quark)

  They are therefore only 2 things that take 2 steps in ID but a quark. not that I want to go back. Laughing out loud

  OK, I've done this since CS2 without need a script. To hide the guides and show an excerpt...

  1) go to "keyboard shortcuts."

  2) go to 'product zone - Tools'. Yes, you would think it would be in sight! But the buttons so that it is at the bottom of the toolbar.

  (3) go in "commands: toggle between preview and default display setting '"

  4) click your cursor inside "New shortcut", then press the key that you want or type in. I chose the unused F2 key

  5) click on the "Assign" button and you're ready. Press the key to move backward.

  As for your mouse Zoom, use Power Zoom as described above, or hold down the Alt/Option key in mode 'Hand' and use the wheel to zoom in and out. Not a single step, but it works!

  Now, you don't miss Quark at all!