CS4, which prevents audio to have gone to some audio tracks?
I find, in some cases, an audio clip that easily penetrate what seems at least an empty track above, will not go there. Instead what looks like something like the small magnet icons... (only verticle)... appears in the location of the cursor and the audio is not moved to the top.
I try to keep the titles a bit since I've monopolized up to 5 audio video and 3. I don't like to get stuff out of the site when editing if possible, or what I like to do things above the timeline so tiny or buried. I would use what seems to be an empty audio track when possible
Is there a setting will I would like to move audio I have it please?
Harry,
The reason for this behavior is that the Audio Clip is not of the correct type for the Audio track. Look in the header of the Audio track for the little speaker icons. They will be a mono =, two = stereo or 5.1 = 5.1. Your video must be the right type to fit.
Good luck
Hunt
Tags: Premiere
Similar Questions
-
CS4 question on audio track (help repair my goof)
OK, this morning I had a pretty goofy goof up. I am putting together a stick to highlight video, and I have a list of Points of In and Out of the customer. In the last hour I lowered clips on the timeline, I just looked and noticed that my Audio track has been extinguished and no Audio signal was dropped on the timeline. Just curious to know if it there anyway to get first to allow me to put the audio, set apart again. I tried double-clicking the item in the timeline to open it in the Source monitor, but it opened up there with no audio. I can't find a way to say first that I want and audio.
Of course, it is only an hours worth of work to do things well and start over (which I'm about to start doing), but I thought I'd ask incase I happen to do so in the future...
Thank you
Phil
Phil,
The first thing I would try is the Match Frame (M key) function, with the corrected entry to Audio & video. Target your Audio & Video Track as well (don't forget to choose an Audio track that is the number of lines of your source, i.e. 2 channels for 2 source footage channels), then move the CTI (current time marker w / Red line change) on each Clip, select it (this will be your video) and press M. Please report if it works, as I hope.
Otherwise, you should be able to select the item in the project Panel and get the Audio, but you will need to set the In and Out Points and drag it to the timeline and in place.
Finally, fix the entry for both Audio & video and make them on, sequence by sequence may be the way - but we'll try to keep it as the fallback.
Good luck
Hunt
-
Timeline shows no name of audio tracks
I just switched from Premiere Elements Pro and having some problems...
One of the greatest: in the Timeleline Pro does all the names on audio tracks!
Which means in the video track I see something like '[V]example.mp4' and in the corresponding audio track, I see just the icon of "fx".
I've expanded the view zoom and titles and all, unlocked audio-video-nesting - however there is no name in the audio tracks to be seen!
For this reason, I get confusued which the audio track belong to which video, so it's really important for me to get this name in the timeline panel.
Thanks in advance!
Unfortunately, it is the default view of Adobe. Fortunately, it can be easily corrected. Click on the key icon next to the sequence of timecode.
-
Why someone stop me from joining thiws people? I want to be part of linked-in.com and I was for a while and I had a hard time with my writing and need to stop talking with them for a while, sorry about my spelling may be a little off tonight because my doctors have me on some serious drugs that they believe can help find out if I have cancer in my body , so please forgive me if I make mistakes. I'm honestly on this operation on an object.
Hello
It seems that you need to contact and work with the support of LinkedIn.
LinkedIn - Contact us - help center
https://help.LinkedIn.com/app/home/ls/1208%2C1226%2C2340%2C6003LinkedIn - Help Center
https://help.LinkedIn.com/app/answers/list/LS/265%2C279%2C337%2C641LinkedIn - Customer Service
http://contacthelp.com/directory/Internet/Web+sites/LinkedIn?ListingID=348I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I gave my credit card details and payment was supposed to have gone through but my work of isen can't creative cloud
Hello
I see you have a subscription under the same email as for forums.
The subscription is active, in which case you can't use it: -.
First of all, disconnect, then back into creative cloud, using adobe id to pay for your subscription.
https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html
Then, if you launch any product of CC 2015 and the pop up still shows a trial message window, please check this link for the resolution:
https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html
-
I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help
1. did you remove Bootcamp using disk utility?
2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.
-
P3K49EA: How do you know which wireless adapter you have?
Hey,.
I was looking at the Wi - Fi drivers for this specific unit but for many other portable, I can find the drivers for the network for a series of adapters Wi - Fi, like Intel, Realtek, and Qualcomm.
Many times, a way to solve the problem of falling of the internet is now by installing the last Intel Wi - Fi and Bluetooth card, but there are other drivers for the cards made by other manufacturers, how do I know for sure that my device has a processor intel Wi Fi adapter?
I don't know that, in some cases, you can check back and see exactly which wireless adapter you have, but who are these dependent region?
For example. each laptop, Pavilion, envy and water courses that are sold to the United Kingdom, all have an Intel wireless adapter? and if it was a laptop computer with an AMD processor and chipset?
Really looking forward to hearing from you guys.
Thank you
Steven
I suspect that you have installed the Realtek wired ethernet driver and Intel wifi driver. Only the driver for the hardware you have installed. In fact, the tag on the laptop won't tell you much. If you look to the top of the support page for your specific model, it will show the drivers for all the optional features available in this series of models. And Yes, the wireless cards can be region-specific. The regulation on radio communication varies around the world. That's why several wireless drivers are listed, some of which you can't use. Unless you are having problems just use office supplies Windows driver. If there is a problem, it may be necessary to know your specific hardware so that you can find a more specific driver from the manufacturer's Web site, or you can search the Internet for other people having a problem with this specific device and use other suggest drivers. I hope that this is a logic.
-
How can I delete (permanently) updates that Microsoft recommends? It maintains lists for Microsoft Office, which I don't have on my computer.
Hello
/ Do you have an older version, spectators or one test on the system? Those who may be why the
try to install updates - a glitch is also possible.Control Panel - Windows Updates - right click on updates and SKIN
also follow these steps:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
original title: problem with file ntsd.exe
I just did a check of norton power Eraser which revealed that I have a problem with the file ntsd.exe. Does anyone have suggestions about what to do to fix it? Thank you very much.
Hi JohnABuckley,
- Are you facing any problem on the computer?
Ntsd.exe is a process belonging to the Microsoft symbolic debugger that lets you debug applications in user mode.
As the link below, it says that there is a risk that Norton Power Eraser can select some legitimate programs for removal. You should carefully review the analysis results page before deleting the files. I suggest that you don't delete the file unless you are facing problems with the computer.
-
I can't do the system restore and I have nothing on my "All programs" button, which means that I have not accessories, System Tools, etc. How can I get that back?
Hello CalebCox,
I suggest that you try the methods below to resolve this issue.
Method 1:
This problem can be caused due to infection by the Virus. I suggest that you run a virus scan on your computer using Microsoft Safety scanner and check if you have the same problem.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Check if you have the same problem in the new user account.
You can refer to the link below, which will give you information on how to create and configure user accounts in Windows XP
http://support.Microsoft.com/kb/279783
If works, you can copy data to the new user account:
-
To turn off the Recycle Bin so that the files that you delete from your hard disks have gone permanently without having to empty the trash, what should you do?
Original title: help
Hello
Hold down the 'Shift' key when you delete and it bypasses the Recycle Bin.
See you soon.
-
My desktop icons have gone white and do not work as shortcuts
The desktop icons have gone white and do not work as shortcuts. Make a right click on the desktop does nothing.
The desktop icons have gone white and do not work as shortcuts. Make a right click on the desktop does nothing.
Try to rebuild your icon cache. It may be damaged.
http://www.Vistax64.com/tutorials/117229-icon-cache-rebuild.html
In addition, you might want to see if there is corruption in some of your system files.
Use this tutorial to make the verification of the file system. He will try to fix it if it is found.
http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html
-
My daughter's office got fried during the last storm, even though she had a surge protector. Obviously the power company line was bad. The pc seems to have gone to a previous set point during the boot, but now she can not install software and doesn't seem to have Norton AV more. When she tries to run a system restore it gets "extended attributes are incompatible."..: thank you for your help. Debbie
Hello
I would suggest trying the following methods and check if it helps.
Method 1:
Run the scan tool (SFC) System File Checker and check if it helps.
This problem may occur if a system file is missing or damaged.
You can refer to the method-the System File Checker tool in the following article:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.Microsoft.com/kb/929833
Method 2:
Try to clean boot, and then check to see if this helps you.
How to solve the problem by running the clean boot in Windows 7:
http://support.Microsoft.com/kb/929135Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.
Method 3:
Try the steps in the following Microsoft article and check if it helps.
Problems installing and uninstalling programs on Windows computers:
http://support.Microsoft.com/kb/2438651
Hope the helps of information. Please post back and we do know.
-
I don't know what is happening, I did a system restore and it did not work, and all my icons and files I had on my monitor have gone
Try this to rebuild icons: -.
Open the command prompt as administrator and copy and paste each command and press ENTER after each command:-
- Taskkill /IM explorer.exe/f
- CD /d %userprofile%\AppData\Local
- DEL /a IconCache.db
- Shutdown /r
-
* Original title: download Windows 7 Disc Images (ISO files)
Nice day.
I can't check my product key (which I believe I have a valid product key) when I want to download Windows 7 (ISO filers) Disk Images.
Please notify.
How to: What are my options for Windows 7 reinstall media?
Make sure you scroll down and read the section:
What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?
Maybe you are looking for
-
My google accepts my account, but you do not have
Icannot video in the dissemination of looking youtube. ICAN get video but the video does not work. ICAN see the beginning of the video, but it does not, moreover, Ican does not control my mouse. For example, can not close the page. I only reboot the
-
Photosmart 7520 will not print on color construction paper.
My Photosmart 7520 print text on color construction paper. It feeds through the status bar, but does not print.
-
On my keyboard, the keys of 1800:dead satellite
I have a Toshiba Satellite 1800 series of second hand in my possession, but for some reason, some of the keys seem to be dead on the keyboard, the dead keys are the ' Y, U, J, K, N and M, all other keys seem to be at the end of work. "
-
HP Pavilion DV5 1010tx wireless button not working not
My wireless button has stopped working since I upgraded my Vista 64 - bit of Windows 7 Pro 64 bit. Advice please?
-
Hello My computer is HP 430 Notebook PC. This is a brand new. but I did not get any CD driver with him. while I downloaded all the drivers for Windows 7 Ultimate 32 bit on HP official website. There is a driver called as below... So I press start to