CS5.1 replaced my CS5 with problems
I wrote this a few minutes ago but th forum shows only a blank sheet
Following the advice of a knowledgeable person, I have attempte to consolidate my many actions in a single master folder and to use aliases in the appropriate oc records CS5 and CS 6, to avoid clutter.
After finishing, WHATEVER is only I CAN FACT, I tried to restart CS5. They showed me a message that it was missing some important files and I need to reinstall CS5. I then uninstalled CS5.
I could find only a .dmg for CS5.1 file. It was already on my hard drive. I ran that Installer and now I have Photoshop CS5 and Photoshop CS5.1 records, as well as the bridge proper, Manager, prefs, folders, etc.
Now both of these applications look good but there is a problem with the prefs. Also, I do not know which of these to be deleted, that associated files. I guess that everything which are labeled with CS5 or CS5.1.
advice to the exception "very ashamed"?
Thank you
Vince
Actually, you mostly right, but I think that what you really want to do is to record your actions created, and actions left 3rd that you have obtained elsewhere, as files in a secure central location .atn separate areas of installation of Photoshop. You can use subfolders to organize things, and this should be a place that save you as your important documents, while you are protected against losses.
Without doing something special in what configuration aliases, in Photoshop, just use the icon of the small dropdown at the top right of the Photoshop Actions panel and choose Load Actions and choose a .atn file.
Each .atn file that you upload will appear at the bottom of the Actions Panel, and you can drag it to somewhere different in Control Panel if you wish.
To save a set of actions, click once on a defined action name to highlight, so that even little fly-out icon choose Save the stock. The entity in the form of file .atn in this safe place on your backup disk, you created for storage of stocks.
-Christmas
Tags: Photoshop
Similar Questions
-
new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help
Looks like you have somehow the mac version.
Download the updated windows 6.7 camera raw from this link:
-
problem with preloader in Cs5 with AS2
Hey,.
I did a preloader in Cs5 with AS2 code:
mask_mc._height = 1;
this.onEnterFrame = function (): Void
{
var load: number = this.getBytesLoaded ();
var total: number = this.getBytesTotal ();
var percent: Number = Math.round(loading/total*100);
mask_mc._yscale = percentage;
txt. Text = percentage + "%";
If (load > = total)
{
gotoAndStop (2);
}
}
because I realized that what I'm used to the Cs4 does not work in Cs5. It works fine, but when I press a button, it suppose to go to another frame, it stock on frame 2.
How can I solve it?to end this loop:
mask_mc._height = 1;
this.onEnterFrame = function (): Void
{
var load: number = this.getBytesLoaded ();
var total: number = this.getBytesTotal ();
var percent: Number = Math.round(loading/total*100);
mask_mc._yscale = percentage;
txt. Text = percentage + "%";
If (load > = total)
{
delete this.onEnterFrame
gotoAndStop (2);
}
} -
Images of CS5 with Canon Raw (CR2)
I just installed a copy of Adobe photoshop on my 2008 (or ' 09) MacBook Pro. I got this message...
"Could not complete your request because the file appears to be a model of camera that is not taken in charge by the installed version of Camera Raw. .
Please visit the Camera Raw help documentation for more information. "
I installed Adobe DNG Converter 9.2recommend it.
This does not solve the problem. I get the same message when you try to import or to start a project of CS5 with an image of CR2.
CS5 cannot manage an image of CR2 format a Canoon 70 d or I need a new version of Photoshop?
Any help would be greatly appreciated
Camera Raw 8.2 requires CS6, your only option, apart from the purchase of a newer version, is the DNG Converter.
Simply install the converter DNG is not to convert your raw files.
You must run it on a folder containing your cr2 files, which will be converted to DNG, which you can open in Camera Raw. (your CR2 files remain intact)
The converter works only at the folder level, you can not convert individual files. (you cannot yet see in the interface until you click on convert)
Before using the converter, click Preferences and set the compatibility to Camera Raw 6.6 and later versions.
But to get the most out of your photos, I recommend you upgrade Photoshop CC.
Photography Plan, which includes Photoshop and Ligtroom for $ 10 a month is a good deal.
-
I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem current motherboard works but is old and has problems with heat. Not worried about having to re-record software am just worried starting problems
Friday, October 19, 2012 19:03:30 + 0000, * address email is removed from the privacy * wrote:
I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem current motherboard works but is old and has problems with heat. Not worried about having to re-record software am just worried starting problems
Two points:
1. it is unlikely that your current installation would work if
you have changed motherboards. You need to reinstall itself.2 but you cannot use your current copy of Windows if you change
motherboards, not even if reinstall you it cleanly. The largest
disadvantage of an OEM version, is that its license it binds permanently
the first computer, it is installed on and Microsoft believes that
If you change the motherboards, another computer. It can never
legally be moved to another computer, sold or transferred (except with)
the original computer). If the computer dies or is stolen, your
license dies with him.Ken Blake, Microsoft MVP
-
We had to install a new hard drive. I installed CS5 - no problem, but cannot download and install CS6. Can you help me?
Hello
You can check the above troubleshooting steps: https://helpx.adobe.com/creative-cloud/kb/download-update-errors.html
Let us know if this helps!
-
I had CS5 on a computer that has crashed with WIndows 7. How to restore my CS5 with the backup files?
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
- Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
Update CS5 with Adobe Application Manager.
I tried to update CS5 with Adobe Application Manager. But after downloading the files, he immediately stopped saying "update is not a success, failure to download the file, stop the program and later it starts again." No code or somethinh else. The system is Win8.1. Does anyone has a tip?
Hello
Please try to download the update from the product updates
Kind regards
Sheena
-
I have CS5 with two computers under license, and a pc no longer works. How can I put CS5 on my new laptop with a valid license?
You will need to contact Adobe to reset your license.
-
Currently, I have Photoshop CS5 with Adobe Bridge. The upgrade online for Photoshop CS6 includes upgrades to the bridge? I recently bought a camera Nikpn D810. The old version of the bridge does not recognize the D810 Camera Raw format. Thanks for any help.
New digital camera sometimes means an upgrade of the software, as in this case.
Camera Raw plugin | Supported devices
Applications of camera Raw compatible Adobe
First, the D810 is supported in camera Raw which is compatible with the CS6 and later versions 8.6.
Options:
- Pay for upgrade to CS6
- Join the cloud to Adobe
- Download the free Adobe DNG converter, convert all the D810 Raw files to DNG, and then edit the DNG in CS5 helps Photoshop | Digital Negative (DNG)
-
I own CS5 with discs & Key Codes, but my new PC does not have a DVD, how can I download the software?
Hello
You can download it from
-
How to get images in indesign CS5 with javascript?
Hello world
How to get images in indesign CS5 with javascript? I want to delete them.
Can someone give me some example codes?
Thank you
Bridge
var doc = app.activeDocument; var graphics = doc.allGraphics; for (var i = graphics.length-1; i >= 0; i--) { try { graphics[i].remove(); // delete only image // graphics[i].parent.remove(); // delete image and its containing frame } catch (err) {} }
Note: Tested in CS3, Windows
I hope this helps.
Kasyan
-
When apple replaced replace an iPhone with a brand new or a refurbished phone?
I had an iPhone 5 9.0 iOS which replaced hardware and software problems one day return. The phone I received was a 5 s with
a weaker version of iOS, which is 8.4. It is extremely disappointing.
I was also told that apple provides a phone refurbished during replacement. Is this true?
Depending on if the phone is still under construction, you can get a new camera, for example, if you have just purchased an iPhone 6s + and must be replaced.
If it's older models, for example the iPhone 4, the replacement is probably a refurbished device.
These Apple says:
All service repair
When you send your iPhone to Apple, we will look to confirm that she is eligible for the service you have requested. If your iPhone is eligible, we will fix your iPhone or replace it. The replacement will be new or equivalent to new in performance and reliability. If we determine that your iPhone is eligible for a different service that you have requested, we will contact you with more information.
copied from: answer Service Center - iPhone
Some users don't mind get a refurbished, because it has been very carefully checked by Apple, to make sure that all parts are in perfect condition.
-
How to replace Windows 8 with Windows 7 on a Compaq CQ58
Hello!
Yesterday, I bought a Compaq CQ58 with Windows 8 on it. I would buy Windows 7 to replace Windows 8 with. But:
1. it is posible to change 06:52 on my laptop CQ58?
2 and if so, can I have programs default HP on this subject?
3 and if so, how?
When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.
The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.
1. it is posible to change 06:52 on my laptop CQ58? YES, it is probably possible to install Windows 7 on your computer.
2 and if so, can I have programs default HP on this subject? NO.
3 and if so, how?
WARNING *.
HP does not recommend installing Windows 7 on a consumer computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.
Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.
You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.
After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.
If you install from a USB key and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '. This should clear up the CD/DVD device is missing.
In addition, as the hard drive is probably partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".
I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.
From the top...
(1) turn on the computer and immediately start typing the key "ESC".
(2) when the MENU is displayed, press "F10".
3) navigate the BIOS to the "System Configuration", 'USB 3.0 pré-OS Config' and the value 'Auto '.
4) navigate the BIOS to the "System Configuration", "Startup Options" and "Secure Boot" the value 'Legacy Support' the value "Enabled" and "Disabled"
5) press "F10" and click "YES" to "Exit Saving Changes".
(6) computer should restart and display "Change of operating system startup Mode"... type the four digit code, then press "ENTER".
(7) let Windows 8 boot to the top and put the Windows 7 SP1media in the drive to DVD or a USB port, then logout / stop.
(8) to turn on the computer and immediately start typing the key "ESC".
(9) when the MENU is displayed, press the key "F9" and then select the correct boot UEFI source (CD/DVD drive internal, USB drive, CD/DVD, USB Flash drive, etc.). ... Press any key to start the CD/DVD, if prompted.
(10) select "Language", "time / currency ' and 'Keyboard' settings and then click"Next ".
11) click on 'install now '... Check "Accept terms" and click "next". Click on "Custom (Advanced)".
(12) you may need to provide Intel or AMD SATA/RAID drivers at the moment...
(13) ' where do you want to install Windows 7? Select "Disk / Partition" with "Unallocated space", you created earlier, and then click "next".
(14) follow all instructions and meet the need. Enter the Windows 7 key when asked.
(15) download and install the drivers from the support page for your computer.
After installing the drivers, please post the "Hardware ID" Device Manager (text only) for all other devices missing or unknown as illustrated in the example below.
If you have any other questions, feel free to ask.
Please click the 'Thumbs Up' white LAURELS to show your appreciation
-
Can I replace Windows Vista with Windows 7 on my laptop which has a 32-bit platform?
Replace Windows vista with windows 7
Sam50
Check the requirements below and run the Windows Upgrade Advisor to see.
Then my computer run Windows 7?
Basic system requirements are listed below. Features have additional requirements.1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor
1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)
16 GB of disk space available (32-bit) or 20 GB (64-bit)
Graphical device DirectX 9 with WDDM 1.0 or higher driver
Run Windows Upgrade Advisor to see if there are known problems that might affect installation and if you need to install the 32-bit or the 64 bit version of Windows 7.
http://Windows.Microsoft.com/UpgradeAdvisorYou can buy Windows 7 here:
http://www.microsoftstore.com/store/msstore/cat/CategoryID.44066700
How to upgrade:
If you have Vista:
Update: http://windows.microsoft.com/en-us/windows7/help/upgrading-from-windows-vista-to-windows-7
Custom installation: http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-vista-to-windows-7-custom
Maybe you are looking for
-
Adobe CC is tested on Sierra? Sierra will work, but not all the bells and whistles on a 11 first Macbook Pro? That of El Capitan can be installed without it is available on the Mac App Store? Y at - it a link to a clean, fresh and full installation c
-
Tecra A11 - 11: BSOD when plugging in USB devices
Help. We have several laptop Tecra A11 - 11 to different schools * ALL * with the same problems. When the laptop is up and running if a USB device is plugged into one of the USB ports the laptop flashes a very quick BSOD and dies. What is more remark
-
Touchscreen driver update problem
So, I have a HP tm2t touchscreen, Windows 7. Everything works fine, except for the button; is not serious if I try to touch it with your finger or the stylus, it wouldn't recognize it. I tried all the stuff mentioned in other articles, still does not
-
Windows XP on Compaq CQ61-410US
Hello, I recently bought a Compaq CQ61-410US and he was giving me no trouble. I need to install Widnows XP out there because I need to run programs that won't run in Windows 7 Home premium x 64. So I tried to slipstream drivers and all, but I get the
-
My computer does not recognize my Wireless Mobile Mouse 3500 more
I just bought this mouse about 1 month ago. It worked perfectly today until the connection has been lost suddenly while I was installing some drivers and programs... I tried out the USB and then place it into other usb ports, but that has not worked.