CS6 DW FTP fails after installing OSX 10.8
Today, I installed OSX 10.8 of the Apple app store. After the installation of Dreamweaver needed a Java runtime update before it will open. Since then, I was not able to connect to FTP. When I press the "Connect to remote server" button it will not connect. The button just bounces off and remains off.
Anyone else experienced this?
Ok. It is now resolved. Have just spent a few hours screenshare with an Adobe representative. It turned out to be a corrupt plist file.
It was the culpret: com.adobe.dreamweaver12.plist
Maybe this thread will help someone in the future. Certainly save a load of time.
I deleted the file above, DW rebooted and all was well again.
Tags: Dreamweaver
Similar Questions
-
communication manager fails after installing vista 64 sp1__
communication manager fails after installing the vista 64 sp1. If I try to uninstall the sp that the entire system crashes
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
Illustrator CS6 says 'installation failed' when installing.
Illustrator CS6 says 'installation failed' when installing. No explanation is given. I have not all previous versions of the installed AI or any trial. Help? I really need to use this product today!
We do not know. You must provide the information system and possibly Setup logs:
The problems with the installation logs
Mylenium
-
CD/DVD on Satellite U500 drive failed after installing Windows 10
My CARPET * drive dvd DVD - RAM UJ862AS failed after W10.
I told myself I need Toshiba ' * 86 device ACPI Compliant added logic and general use "BEFORE I can install the driver for the DVD drive.
I tried Microsoft idea to remove the pilot of regedit and restart the laptop that should logically result in reinstalling the driver... with no luck.I'm about to give up the laptop but am wondering if anyone can help me?
I am extremely reluctant to lose a lot of money on several unnecessary drivers (generally unreliable) providers!
U500 is old piece of hardware and not supported for Win10, right?
In any case, what is the status in Device Manager? Is ODD listed here or you just entered with device "unknown"?
-
After clicking on the icon of Firefox, I get the error message "this application has failed to start because the application configuration is incorrect".
I uninstalled Firefox and deleted all the Mozilla files in my user account in the Documents and Settings folder. I installed the latest version of Java. Then I installed Firefox 12.0.
I had this same problem when I updated my Firefox 11 to a later version of Firefox 11. I hadn't saved the old version of Firefox 11, and I couldn't find on the web, so I went back to Firefox 3.6. I am currently in Firefox 3.6.28.
I'd like suggestions on how I could get over this stumbling block.
Details of the configuration of my system:
Version Java 6 32
Name of the operating system Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 3 Build 2600
System Type X 86-based PC
Processor x 86 Family 6 Model 15 Stepping 6 GenuineIntel ~ 1867 Mhz
Total physical memory 048,00 MB 2
1.38 GB available physical memory
Total virtual memory 2.00 GB
Available virtual memory 1.96 GB
Page file space 3.84 GB
You can try to uninstall all entries of "Microsoft Visual C++" from the windows control panel and see if the error message disappears.
(where another program on your pc depends on execution, it will display a dialog box when you start this program and offers you to reinstall once again)
-
USB3 Driver install fails after installing fresh Win7
Today, I did a full 64 fresh install of Windows 7 (using supplied Alienware DVD) of my Alienware Laptop M17xR3. After finished with updates installed so Win7 Windows7, I went to the web page of Dell Alienware and installed all the recommended drivers.
In my device manager, all components of the system have been scanned and work well except one... my USB controller under other. Its my USB 3.0
I tried to install this driver recommended several times following...
NEC USB 3.0, v.2.0.26.0, A00see detailsR289408.exeThe installation fails every time saying: error - 2: the system cannot find the specified file.Here's a screenshot:My serial number is CW2B5Q1It is probably just a standard set of drivers NEC and Renesas. Have you tried to manually unzip archive and look inside or run from there?
Have you tried letting Windows load a Windows-Update driver?
-
system failed after install customer essbase on 11.1.2.3
I did an install and config of 11.1.2.3 for essbase and planning
After I run the go-ahead from diagnosis all the way
I have install the EAS Client reboot the server and then everything fails
Diagnosis
Generated 08/31/2013 1 h 51
Running on NextLevelServer of validation
Build version: 11.1.2.3.0.8719
The EPM System Diagnostics Info: 11.1.2.3.0 drop build 27 8414-on-03/21/2013 10:40
Name of the operating system: Windows Server 2008 R2
OS version: 6.1
Location of the Instance of EPM system: C:\Oracle\Middleware\user_projects\epmsystem1
Status Service Test Description duration of test
Foundation of Hyperion
Validation of audit FAILED that the audit has been initialized
Error: Failed to execute of Checker.
Recommended action: check the logs of validation for exception details.
4 seconds
Not a NOT THESE validate that CES has been initialized
Error: Failed to execute of Checker.
Recommended action: check the logs of validation for exception details.
4 seconds
WARNING CFG: Configuration validating this configuration tasks is completed
EPMVLD-01004: the following configuration tasks have been completed:
Configure the Web server: pending
Configure the database: pending
Configure: pending
Configure common settings: pending
Configure Oracle Configuration Manager: pending
0 seconds
Is NOT CSS validation CSS has already been initialized
Error: Failed to execute of Checker.
Recommended action: check the logs of validation for exception details.
4 seconds
FAILED EXT: Running the checker of external authentication failed.
Error: EPMCSS-00000: failed to process the request. Internal server error. For related errors, see EMP Shared Services security log file.
Recommended action: check the logs of validation for exception details.
8 seconds
HUB COULD not validate this HUB has been initialized
Error: Failed to execute of Checker.
Recommended action: check the logs of validation for exception details.
4 seconds
PAST WEB: Permissions HIT all entries are present in system-jazn-"Data.xml"
0 seconds
FAILURE of LCM validating this LCM has been initialized
Error: Failed to execute of Checker.
Recommended action: check the logs of validation for exception details.
4 seconds
FAILED to perform Single Sign-On check failed.
Error: Failed to execute of Checker.
Recommended action: check the logs of validation for exception details.
2 seconds
LNK FAILED: registry check that all the components in the registry have a link to the host
Error: Failed to execute of Checker.
Recommended action: check the logs of validation for exception details.
0 seconds
PAST CFG: Control environment if the system path variable length exceeds 2 000
0 seconds
REG failed: checking Configuration if the product has a single product in the registry node.
Error: The SHARED_SERVICES_PRODUCT component was not found in the registry.
Recommended action: try to re-config product.
0 seconds
Validation FAILURE registry that the registry has been initialized
Error: Failed to execute of Checker.
Recommended action: check the logs of validation for exception details.
4 seconds
Registration of EPM system
Essbase / Essbase
WARNING CFG: Configuration validating this configuration tasks is completed
EPMVLD-01004: the following configuration tasks have been completed:
Configure the Essbase server: pending
Register with Shared Services: pending
Configure: pending
0 seconds
REG failed: checking Configuration if the product has a single product in the registry node.
Error: The ESSBASE_PRODUCT component was not found in the registry.
Recommended action: try to re-config product.
0 seconds
Essbase / Essbase Administration Services
WARNING CFG: Configuration validating this configuration tasks is completed
EPMVLD-01004: the following configuration tasks have been completed:
Configure the database: pending
Register with Shared Services: pending
Configure: pending
0 seconds
REG failed: checking Configuration if the product has a single product in the registry node.
Error: The ESSBASE_ADMINISTRATION_SERVICES_PRODUCT component was not found in the registry.
Recommended action: try to re-config product.
0 seconds
REG failed: checking Configuration if the product has a single product in the registry node.
Error: The ESSBASE_PRODUCT component was not found in the registry.
Recommended action: try to re-config product.
0 seconds
Essbase / Essbase Integration Services
WARNING CFG: Configuration validating this configuration tasks is completed
EPMVLD-01004: the following configuration tasks have been completed:
Configure the Essbase Integration Services: pending
Configure: pending
0 seconds
REG failed: checking Configuration if the product has a single product in the registry node.
Error: The ESSBASE_INTEGRATION_SERVER_PRODUCT component was not found in the registry.
Recommended action: try to re-config product.
0 seconds
REG failed: checking Configuration if the product has a single product in the registry node.
Error: The ESSBASE_PRODUCT component was not found in the registry.
Recommended action: try to re-config product.
0 seconds
Essbase / Essbase Studio
WARNING CFG: Configuration validating this configuration tasks is completed
EPMVLD-01004: the following configuration tasks have been completed:
Configure the database: pending
Register with Shared Services: pending
Configure: pending
0 seconds
REG failed: checking Configuration if the product has a single product in the registry node.
Error: The ESSBASE_STUDIO_PRODUCT component was not found in the registry.
Recommended action: try to re-config product.
0 seconds
REG failed: checking Configuration if the product has a single product in the registry node.
Error: The ESSBASE_PRODUCT component was not found in the registry.
Recommended action: try to re-config product.
0 seconds
Essbase / service provider
WARNING CFG: Configuration validating this configuration tasks is completed
EPMVLD-01004: the following configuration tasks have been completed:
Configure: pending
0 seconds
REG failed: checking Configuration if the product has a single product in the registry node.
Error: The ESSBASE_PRODUCT component was not found in the registry.
Recommended action: try to re-config product.
0 seconds
Foundation / calculation Manager
WARNING CFG: Configuration validating this configuration tasks is completed
EPMVLD-01004: the following configuration tasks have been completed:
Configure the database: pending
Register with Shared Services: pending
Configure: pending
0 seconds
REG failed: checking Configuration if the product has a single product in the registry node.
Error: The CALC_MANAGER_PRODUCT component was not found in the registry.
Recommended action: try to re-config product.
0 seconds
Foundation / Performance Management architect
ÉCHEC de lancement AppMgrLoadAdf vérificateur externe avec la commande suivante : C:\Oracle\Middleware\EPMSystem11R1\... \jdk160_35/bin/Java-DEPM_ORACLE_HOME = C:\Oracle\Middleware\EPMSystem11R1-DEPM_ORACLE_INSTANCE = C:\Oracle\Middleware\user_projects\epmsystem1-Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration-Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.appmanager.AppMgrLoadAdf
Error: Failed to initialize AppMgrLoadAdf. Please check all the registry information are valid and HSS is running.
Recommended action: make sure that the external auditor is working.
11 seconds
WARNING CFG: Configuration validating this configuration tasks is completed
EPMVLD-01004: the following configuration tasks have been completed:
Create the virtual directory EPMA: pending
Configure the database: pending
Register with Shared Services: pending
Configure: pending
0 seconds
ÉCHEC de lancement DimEditorLoadAdf vérificateur externe avec la commande suivante : C:\Oracle\Middleware\EPMSystem11R1\... \jdk160_35/bin/Java-DEPM_ORACLE_HOME = C:\Oracle\Middleware\EPMSystem11R1-DEPM_ORACLE_INSTANCE = C:\Oracle\Middleware\user_projects\epmsystem1-Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration-Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.dimeditor.DimEditorLoadAdf
Error: Failed to initialize DimEditorLoadAdf. Please check all the registry information are valid and HSS is running.
Recommended action: make sure that the external auditor is working.
12 seconds
ÉCHEC de lancement EnumApplications vérificateur externe avec la commande suivante : C:\Oracle\Middleware\EPMSystem11R1\... \jdk160_35/bin/Java-DEPM_ORACLE_HOME = C:\Oracle\Middleware\EPMSystem11R1-DEPM_ORACLE_INSTANCE = C:\Oracle\Middleware\user_projects\epmsystem1-Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration-Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.repository.EnumApplications
Error: Failed to initialize EnumApplications. Please check all the registry information are valid and HSS is running.
Recommended action: make sure that the external auditor is working.
11 seconds
ÉCHEC de lancement EnumDataSyncs vérificateur externe avec la commande suivante : C:\Oracle\Middleware\EPMSystem11R1\... \jdk160_35/bin/Java-DEPM_ORACLE_HOME = C:\Oracle\Middleware\EPMSystem11R1-DEPM_ORACLE_INSTANCE = C:\Oracle\Middleware\user_projects\epmsystem1-Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration-Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.repository.EnumDataSyncs
Error: Failed to initialize EnumDataSyncs. Please check all the registry information are valid and HSS is running.
Recommended action: make sure that the external auditor is working.
11 seconds
ÉCHEC de lancement EnumDimensions vérificateur externe avec la commande suivante : C:\Oracle\Middleware\EPMSystem11R1\... \jdk160_35/bin/Java-DEPM_ORACLE_HOME = C:\Oracle\Middleware\EPMSystem11R1-DEPM_ORACLE_INSTANCE = C:\Oracle\Middleware\user_projects\epmsystem1-Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration-Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.dimeditor.EnumDimensions
Error: Failed to initialize EnumDimensions. Please check all the registry information are valid and HSS is running.
Recommended action: make sure that the external auditor is working.
11 seconds
FAILED PMAJ: EPMA validation if Service the jobmanager service is available.
Error: EPMVLD-01006: EPMA service is not available. Check the logs for more details.
Recommended action: make sure that the server is running.
0 seconds
DSC FAILED: Startup EPMA DimensionServer Server Configuration validation EPMA Dimension hyperion-bpma-server... Has no...
Error: Server Dimension was not found in the registry of Shared Services.
Recommended action: make sure the application is started.
0 seconds
REG failed: checking Configuration if the product has a single product in the registry node.
Error: The EPMA_PRODUCT component was not found in the registry.
Recommended action: try to re-config product.
0 seconds
Foundation / workspace
CFG PAST: Configuration validating this configuration tasks is completed
0 seconds
REG failed: checking Configuration if the product has a single product in the registry node.
Error: The component workspace is not found in the registry.
Recommended action: try to re-config product.
0 seconds
PAST REG: Register all links are present in the registry.
0 seconds
Planning
WARNING CFG: Configuration validating this configuration tasks is completed
EPMVLD-01004: the following configuration tasks have been completed:
Configure the database: pending
Register with Shared Services: pending
Configure: pending
0 seconds
REG failed: checking Configuration if the product has a single product in the registry node.
Error: The PLANNING_PRODUCT component was not found in the registry.
Recommended action: try to re-config product.
0 seconds
Test start time: 1:49 08/31/2013
Test the end time: 1:51 08/31/2013
Test duration: 102 seconds
Please notify
This is the second time that this takes place
The database is configured on the same server?
Have you checked database services are in place and after restarting the server, did you start services Hyperion?
See you soon!
SH! going
-
HP Photosmart C4280 - after installing OSX Lion, freeze utility Scan
My C4280 works very well using the OS X Snow Leopard operating system. After that I installed Lion, the scan utility scans, but does not respond when I command to print, save or send. The screen showing the scanned document/photo remains open on the screen cocmputer. I am unable to get out of this window or the screen. I cannot get the HP application scan the computer force quit. Anyone know what I should do (1) get out of this 'frozen' HP scanning application and (2) cause the C428-works all the time?
Thank you.
Hello
The HP scanning application is not compatible with Lion.
Make sure to install any update HP available by clicking the Apple icon, then software update, then you can scan using any method of scan provided by Apple as shown below:
http://support.HP.com/us-en/document/c01910186
If you still have problems, completely remove any HP software installed:
* Please note that the following steps will delete all HP software installed.
1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
2. Select Applications
3 select the Hewlett-Packard folder
4. double-click on uninstall HP application
5 follow the uninstall to prompt to select a device to uninstall
6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
7 approve any prompt to uninstall all HP software.Then reconfigure the printer by obtaining the latest driver of Apple Software Update:
http://support.HP.com/us-en/document/c02911238
Kind regards
Shlomi
-
Each installation of the PATCH fails after installing Windows updates
Hello
I would like to report a problem, I think it's a bug of Windows introduced by one of the Windows updates (unfortunately I could not know who of them).
Here's the test scenario:
1. install a fresh copy of Windows on a test computer
2. install all the Windows updates available (so the system is up-to-date)
3. create a sample MSI installer that installs only some dummy files (let's say Product Version 1.0.0) and host on a web server4. install the MSI from the online location using a command line like this:
msiexec /i http://server/share/package.msi
5. create a. Patch MSP (e.g. v1.0.1) which only adds a new file to v1.0.0
6 install the patch v1.0.1RESULT: the installation of the patch fails with the following error message: "the file name, directory name or volume label syntax is incorrect."
NOTES:
1. the question has replicated to Windows 7 and 8 machines updated
2. the question is not replicated on a new install of Windows without updates appliedIs anyone aware of what may cause this error? Once again the patch installation fails only on Windows computers with the latest updates installed.
THX,
Daniel
Hello Daniel,.
Thanks for posting in the Microsoft Community.
I suggest you post your question in the MSDN forums:
Check out the link:
https://social.msdn.Microsoft.com/forums/en-us/home
Hope this information is useful. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.
-
Validate.bat fails after installing hotfix 17608117 on SPARC
We have recently added a 11.1.2.2.0 extra Essbase server in our environment. "After patching the server to 11.1.2.2.105 and from Essbase, (start.sh), we get the following error:"
(21 Dec., 2015) The Essbase server verification failure.
(Dec 21, 2015) - failed: connection to the server of Essbase validation error SERVEUR123: could not connect to the olap service. Unable to connect to server Essbase to 'SERVER123:1423 '. Error network [10061]: unable to connect to [SERVER123:1423]
(21 Dec., 2015) Failure of the server control Essbase using MaxL.
(21 dec, 2015) - could not: start the Essbase Server validate using the MaxL error: unable to connect to the Essbase server because of the following network error: null
If restore us the patch for the base level, marketing services in fine. Any suggestions?
Thank you Rick. The trick was to read the whole readme. Once I have completed the following, Essbase started as expected.
Copy the files located in your bin directory:
Copy all the files from DRIVE\Hyperion\products\Essbase\EssbaseServer\localized\
\bin for DRIVE\Hyperion\products\Essbase\EssbaseServer\bin. Replace
in the previous lines by the identifier of the language appropriate for your installation. The identifiers of language for each language available for this version are: -
CS6 for mac, failed to install on the new computer
I have Adobe CS6 Production Premium installed on my Macbook Pro. I'm now looking to install on my new iMac and get this:
Then when I click on "Get Adobe Support Advisor", I get this:
I tried all the possible suggestions on these discussions in the forum, I can not always install it. The product is authentic, I bought it in 2012 at a local apple store and ran it on my Macbook Pro for 4 years without problem. I spent countless hours trying to find a solution (8 hours straight a day) and I am finally at my wits end having tried everything!
Help!
Have you downloaded CS 6 installation below link?
Download Adobe Creative Suite 6 applications
If this isn't the case, please download the Setup on top of link file and try to install.
-
Existing Web site no longer works after installing OSX Server
I have a site on my mac mini, who resides in/Library/WebServer. It has Perl cgi pages, images, css, Javascript files.
I installed Mac server I can use the mac-mini as a place to for Time Machine on my laptop to save on via wifi. Now the Web page has moved and has a different configuration, I can't understand. Before I had a directory/Library/WebServer with Documents to subdirectories, CGI-Executables, Lib, pictures and models. Now it seems that the html files live in/Library/Server/Web/Data/Sites/Default, and I have no idea where the other files to go. Apache does not work either. Disable the sites option just disables the address of the Web site completely. Enter http://localhost just gives an error message saying that Internet sites is disabled.
I didn't change my site, I just wanted the time-Machine capabilies. I put a lot of work in my site and I would like to recover my TI.
Not a good situation, unfortunately. You are either going to learn how OS X Server, or you want to remove OS X Server and perhaps acquire a Time Capsule. (Ac-class AirPort Wi-Fi devices are also supported on Time Machine.)
OS X Server expects local DNS to be put in place, you may not use DNS ISP, if you are on a NAT device would have network - and OS X Server expects that you will place your files in the localities of/Library/Server/Web/Data/Sites, or whatever the directory on your web site is stored in a site within the.app.
In both cases, you will need make your website readable _www.
-
An another bootcamp Windows does not start after installing OSX Yosemite
Someone who can help, lonely T Special attention:
In addition, my mac has been configured with a MAC Partition, a Partition of media (I've used this to share my media iTunes between the two BONES) and finally my bootcamp partition.
When I upgraded to Yosemite I lost access to my bootcamp, and a message appeared "no bootable disk. I searched through many of your forms to try to find a solution and at one point, I found this threadrepair Boot Camp after having created the new partition and I followed these steps:
Enter "7"
Press the return key
Enter "Pavilion 4.
Press the return key
Enter 'p '.
Press the return key
Enter 'w '.
Press the return key
Enter 'y '.
Press the return key
Now, I am still unable to load the bootcamp and I have a screen black different 'non-system disk, press any key to restart '.
I think I maybe I can have pushed me further by following the directions above.
This is the terminal:
Last login: Fri dec 11 20:34:33 on console
Chriss-iMac: ~ the chriswilloughby list $ diskutil
/ dev/disk0
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * 1.0 TB disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_HFS Macintosh HD 200,1 GB disk0s2
3: disk0s3 Apple_Boot Recovery 650.0 MB HD
4: SUPPORT database Microsoft 494,3 GB disk0s4
5: Microsoft database BOOTCAMP 305,0 GB disk0s5
Chriss-iMac: ~ list of cs chriswilloughby$ diskutil
No logical volume group CoreStorage found
Chriss-iMac: ~ chriswilloughby$ sudo TPG - vv - r show/dev/disk0
Password:
See the TPG: / dev/disk0: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168
See the TPG: / dev/disk0: MBR suspicious to sector 0
See the TPG: / dev/disk0: Pri GPT to sector 1
See the TPG: / dev/disk0: GPT Sec at sector 1953525167
start index size summary
0 1 MBR
1 1 Pri GPT header
2 32 table GPT Pri
34 6
40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 390759112 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC
391168752 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC
392438288 1520
392439808 965394432 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1357834240 595689472 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1423 1953523712
1953525135 32 table dry GPT
1953525167 1 dry GPT header
Chriss-iMac: ~ chriswilloughby$ sudo fdisk/dev/disk0
Disk: geometry / dev/disk0: 121601/255/63 [1953525168 sectors]
Signature: 0xAA55
From end
#: cyl hd s - cyl hd s id [Start - size]
------------------------------------------------------------------------
1: EA 1023 254 63 - 1023 254 63 [1-409639]
2: AF 1023 254 63 - 1023 254 63 [409640-390759112] HFS +.
3: AB 1023 254 63 - 1023 254 63 Boot Darwin [391168752-1269536]
* 04:07 1023 254 63-1023 254 63 [392439808-965394432] HPFS/QNX / TO THE
Chriss-iMac: ~ chriswilloughby$
My bad
Solitaire T
-
Uninstall fails after installing the Hyper-V role
I installed VMWare Workstation 7.1.3 on my Windows Server 2008 R2 server to temporarily host some virtual machines. Since then, I installed the Hyper-V role on this server and migrated the Hyper-v hosts. Now I want to uninstall VMWare Workstation, but when I try to do it via the Control Panel programs and features, I receive the inherited error message: "[uninstall] error: this product cannot be installed on Windows XP or later." Windows 95, 98, ME, NT and 2000 are not supported. [OK] "obviously, this message is in error, but in doing some research, I have determined that this error means that the installer refuses to start on systems that have Hyper-V installed.
Is there a version of the installer that allows you to uninstall VMWare Workstation correctly? If not, are there plans to fix this hole? I have to any other option that follow described here manual uninstall procedure? I don't trust the manual uninstall procedure because they understand too gourmet suggestions such as 'Remove your appdata directory' (see uninstallation manual step 5B). Uninstall Hyper-V at this point is not a viable option.
It should be relatively simple to add an option to the installer to bypass verification of Hyper-V (and then use the uninstall option command in the seat).
only chance: Add a bootoption on the server so that it can start with disabled HyperV
- At the command prompt, type the following:
bcdedit /copy {default} /d "No hypervisor". - The above command should say: the entry has been copied successfully to {guid}. Copy the guid to the Clipboard, including the braces.
- Now, type the following command:
bcdedit/set {guid_hvoff} off hypervisorlaunchtype
In the above command, replace {guid_hvoff} with what you copied in step 2. The command above simply sets a property in the boot entry that will not load the hypervisor at startup.
then restart option not HyperV and uninstall
- At the command prompt, type the following:
-
Updates failed after the new HD install
I live in South Africa and use a MacBook Pro bought in the USA by the end of 2014. When I had to replace the HD in December 2015 the company is certified local Apple had to order the HD of the USA. After installing it, they restored my software and data files and mails in Mail.
Since the replacement of HD that I was not able to install updates because after that I give permission to update, I get a notice that no update is available under "this Apple ID" or something to that effect. After 8 months of updates failed my HD is slow again with my computer freezing temporarily and the color wheel - wait please turn from time to time. What should I do to allow updates succeed?
It seems that an another Apple ID that yours has been used when the HD has been replaced.
-Backup your data on an external drive
-Start the recovery of the Internet
On OS X Recovery - Apple Support
by pressing Command + Option + R at the start of the OS X Internet Recovery*.
If start you only on the recovery partition, you may have same problem
then format the boot disk and install OSX. During the installation of recovery of the Internet, the version of Mac OS x installed is what came initially with the Mac. For example, you may need to update/upgrade via the Mac App Store
This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.
Maybe you are looking for
-
Firefox does not play HTML5 audio
My Firefox installation (v33) does not play HTML5 audio.I am referring to audio tracks (MP3) you can listen to on your personal Google Reader. The stream does not start, there is no time of the track being filled. -Youtube HTML5 player works great bo
-
iCloud Mail disastrous deletion after expiration of the credit card?
My iPhone is saved in iTunes to my computer completely regularly - I do not think about iCloud as a significant storage system or back up. iCloud is only useful for me to sync email/contacts etc which is, I'm never bothered with backup photos or othe
-
I tried to measure an IEPE sensor (Simulator) released in parallel to the amplifier signal conditioner. Looking for a scope, I got on with a nice 2Vpp sine 12V bias. If I place a PXI 5922 with a PXI-5900 differential preamplifier for 40Vpp inputrange
-
Is anyway for me to have my sign in the automatic elimination of all enter them every time
Is anyway for me to have my sign in the automatic elimination of all enter them every time
-
HP ENVY Phoenix 810se Office does not
Hello I have not found any recent message on the desktop computer HP ENVY Phoenix 810se with Windows 8.1. My desire is currently blocked in the screen just after the symbol HP is displayed. PC boots, HP symbol appears, "Please Wait" appears wth point